Modeling Growth and Dissolution Kinetics of Grain-Boundary Cementite in Cyclic Carburizing

In vacuum carburizing of steels, short-time carburizing is usually followed by a diffusion period to eliminate the filmlike cementite (θ _GB ) grown on the austenite (γ) grain boundary surface. In order to obtain the θ _GB amount during the process, the conventional model estimates the amount of cementite (θ) with the equilibrium fractions for local C contents within a framework of the finite difference method (FDM), which overestimates the amount of θ _GB observed after several minutes of carburizing. In our newly developed model, a parabolic law is assumed for the growth of θ _GB and the rate controlling process is considered to be Si diffusion rejected from θ under the isoactivity condition. In contrast, the rate constant for the dissolution of θ _GB is considered to be controlled by Cr diffusion of θ. Both rate coefficients (α) were validated using multicomponent diffusion simulation for the moving velocity of the γ/θ interface. A one-dimensional (1-D) FDM program calculates an increment of θ _GB for all grid points by the updated diffusivities and local equilibrium using coupled CALPHAD software. Predictions of the carbon (C) profile and volume fraction of cementite represent the experimental analysis much better than the existing models, especially for both short-time carburization and the cyclic procedure of carburization and diffusion processes.