Weitere Artikel dieser Ausgabe durch Wischen aufrufen
13.01.2016 | Ausgabe 6/2016
Modeling the Elastic and Damping Properties of the Multilayered Torsion Bar-Blade Structure of Rotors of Light Helicopters of the New Generation 2. Finite-Element Approximation of Blades and a Model of Coupling of the Torsion Bar with the Blades
Translated from Mekhanika Kompozitnykh Materialov, Vol. 51, No. 6, pp. 1095-1118, November-December, 2015.
A rod-shape finite element with twelve degrees of freedom is proposed for modeling the elastic and damping properties of rotor blades with regard to their geometric stiffness caused by rotation of the rotor. A model of coupling of the torsion bar with blades is developed based on the hypothesis of linear deplanation of the connecting section of the torsion bar and a special transition element to ensure the compatibility of displacements of the torsion bar and blades upon their vibrations in the flapping and rotation planes. Numerical experiments were carried out to test and assess the validity of the model developed. Suggestions are made for ensuring unconditional stability of the iteration method in a subspace in determining the specified number of modes and frequencies of free vibrations of the torsion bar-blade structure.
Bitte loggen Sie sich ein, um Zugang zu diesem Inhalt zu erhalten
V. N. Paimushin and V. M. Shishkin, “Modeling the elastic and damping properties of the multilayered torsion barblade structure of rotors of light helicopters of the new generation. 1. Finite-element approximation of the torsion bar,” Mech. Compos. Mater.,
51, No. 5, 609-628 (2015).
CrossRef
2.
A. I. Golovanov, V. I. Mitryaykin, and V. A. Shuvalov, “Calculation of the stress–strain state of the torsion bar of the main rotor of a helicopter,” Izv. Vuzov. Aviats. Tekhn., No. 1, 66-69 (2009).
3.
A. V. Chigarev, A. S. Kravchuk, and A. F. Smalyuk, ANSYS for Engineers. Handbook [in Russian], Mashinostroenie-1, Moscow (2004).
4.
R. Klaff and J. Pensien, Dynamics of Constructions [Russian translation], Stroiizdat, Moscow (1979).
5.
S. N. Kan and I. A. Sverdlov, Strength Calculation of a Aircplanes [in Russian], Mashinostroenie, Moscow (1966).
6.
V. I. Biryuk, E. K. Lipin, and V. M. Frolov, Design Methods for Airplane Structures [in Russian], Mashinostroenie, Moscow (1977).
7.
I. S. Golubev, Analytical Methods of Design of Wing Structures [in Russian], Mashinostroenie, Moscow (1972).
8.
I. N. Obraztsov, L. M. Savel’ev, and Kh. S. Khazanov, Finite-Element Method in Problems of Structural Mechanics of Aircraft [in Russian], Vysshaya Shkola, Moscow (1985).
9.
V. F. Formalev and D. L. Reznikov, Numerical Methods [in Russian], Fizmatlit, Moscow (2004).
10.
K. Bathe and E. Wilson, Numerical Methods of Analysis and the Finite-Element Method [Russian translation], Stroiizdat, Moscow (1982).
11.
B. Parlett, Symmetric Problem on Eigenvalues. Numerical Methods [Russian translation], Mir, Moscow (1983).
12.
D. Norri and J. de Friz, Introduction to the Method of Finite Elements [Russian translation], Mir, Moscow (1981).
13.
V. N. Paimushin, V. A. Firsov, I. Gyunal, and V. M. Shishkin, “Identification of the elasticity and damping of a fiberglass based on a study of dying flexural vibrations of test samples,” Mech. Compos. Mater.,
51, No. 3, 285-300 (2015).
CrossRef
14.
V. N. Paimushin, V. A. Firsov, I. Gyunal, and A. G. Egorov, “Theoretical-experimental method for determining the parameters of damping based on the study of damped flexural vibrations of test specimens. 3. Identification of the characteristics of internal damping,” Mech. Compos. Mater.,
50, No. 5, 633-646 (2014).
CrossRef
Über diesen Artikel
Titel
Modeling the Elastic and Damping Properties of the Multilayered Torsion Bar-Blade Structure of Rotors of Light Helicopters of the New Generation 2. Finite-Element Approximation of Blades and a Model of Coupling of the Torsion Bar with the Blades
Die B2B-Firmensuche für Industrie und Wirtschaft: Kostenfrei in Firmenprofilen nach Lieferanten, Herstellern, Dienstleistern und Händlern recherchieren.
Lesen Sie in diesem ausgewählten Buchkapitel alles über den 3D-Druck im Hinblick auf Begriffe, Funktionsweise, Anwendungsbereiche sowie Nutzen und Grenzen additiver Fertigungsverfahren. Eigenschaften eines schlanken Produktionssystems sowie der Aspekt der „Schlankheit“ werden ebenso beleuchtet wie die Prinzipien und Methoden der Lean Production. Jetzt gratis downloaden!
Marktübersichten
Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.