nach oben

Erschienen in:

2020 | OriginalPaper | Buchkapitel

Modelling of Biogas Fueled HCCI Engine for Various Inlet Conditions

verfasst von : Nihal Mishra, Shubham Mitra, Abhishek Thapliyal, Aniket Mahajan, M. Feroskhan

Erschienen in: International Conference on Emerging Trends in Engineering (ICETE)

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A common technique for using biogas in a compression ignition (CI) engine is to blend it with air in the intake manifold, injecting a small quantity of diethyl ether during suction stroke and compress this mixture and ignite it by self-ignition temperature. This is called as homogeneous charge compression ignition (HCCI) mode. This paper evaluates the effects of various intake conditions such as methane fraction, compression ratio, diethyl ether energy fraction, intake temperature and equivalence ratio on output parameters of maximum cylinder pressure, in-cylinder temperature and indicated thermal efficiency using single zone modelling. The modelling result is validated with the experimental data. The increase in compression ratio, diethyl ether energy fraction and intake temperature increase cylinder pressure and in-cylinder temperature.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Numerical Investigation on Factors Affecting the Performance of Roof Bolts for Continuous Miner Working

Nächstes Kapitel Studies on Pitting Corrosion of Pulsed Electrodeposited Nanocomposite Coating

Mihic S (2004) Biogas fuel for internal combustion engines. Ann Fac Eng Hunedoara 2:179–190

Murugesan A, Umarani C, Subramanian R, Nedunchezhian N (2009) Bio-diesel as an alternative fuel for diesel engines - a review. Renew Sustain Energy Rev 13:653–662CrossRef

Agarwal AK (2007) Biofuels (alcohols and biodiesel) applications as fuels for internal combustion engines. Prog Energy Combust Sci 33:233–271CrossRef

Qian Y, Sun S, Ju D, Shan X, Lu X (2017) Review of the state-of-the-art of biogas combustion mechanisms and applications in internal combustion engines. Renew Sustain Energy Rev 69:50–58CrossRef

Visconti P, Primiceri P, Strafella L, Carlucci AP, Ficarella A (2017) Morphological analysis of injected sprays of different bio-diesel fuels by using a common rail setup controlled by a programmable electronic system. Int J Automot Mech Eng 14:3849–3871CrossRef

Saifuddin N, Refal H, Kumaran P (2017) Performance and emission characteristics of micro gas turbine engine fuelled with bioethanol-diesel-biodiesel blends. Int J Automot Mech Eng 14:4030–4049CrossRef

Singh AP, Agarwal AK (2012) An experimental investigation of combustion, emissions and performance of a diesel fuelled HCCI engine, (No. 2012-28-0005). SAE Technical Paper

Feroskhan M, Ismail S (2017) A review on the purification and use of biogas in compression ignition engines. Int J Automot Mech Eng 14:4383–4400CrossRef

Zhao F, Asmus TN, Assanis DN, Dec JE, Eng JA, Najt PM (2003) Homogeneous charge compression ignition (HCCI) engines, (No. PT-94). SAE Publication

10.

Hussaini SY, Lahane S, Patil NG (2016) Analysis of performance and emission characteristics of a homogeneous charge compression ignition (HCCI) engine. Procedia Technol 25:854–861CrossRef

11.

Jaichandar S, Annamalai K (2016) Jatropha oil methyl ester as diesel engine fuel - an experimental investigation. Int J Automot Mech Eng 13:3248–3261CrossRef

12.

Komninos N, Rakopoulos C (2012) Modelling HCCI combustion of biofuels: a review. Renew Sustain Energy Rev 16:1588–1610CrossRef

13.

Nayak S, Mishra P (2017) Emission from a dual fuel operated diesel engine fuelled with CalophyllumInophyllum biodiesel and producer gas. Int J Automot Mech Eng 14(1):3954–3969CrossRef

14.

Bhaskar K, Sendilvelan S, Muthu V, Aravindraj S (2016) Performance and emission characteristics of compression ignition engine using methyl ester blends of jatropha and fish oil. J Mech Eng Sci 10:1984–1997CrossRef

15.

Bae C, Kim J (2017) Alternative fuels for internal combustion engines. Proc Combust Inst 36:3389–3413CrossRef

16.

Tippayawong N, Thanompongchart P (2010) Biogas quality upgrade by simultaneous removal of CO₂ and H₂S in a packed column reactor. Energy 35:4531–4535CrossRef

17.

Demirbas A (2004) Combustion characteristics of different biomass fuels. Prog Energy Combust Sci 30:219–230CrossRef

18.

Demirbas MF, Balat M, Balat H (2011) Biowastes-to-biofuels. Energy Convers Manag 52:1815–1828CrossRef

19.

Shukri MR, Rahman MM, Ramasamy D, Kadirgama K (2015) Artificial neural network optimization modelling on engine performance of diesel engine using biodiesel fuel. Int J Automot Mech Eng 11:2332–2347CrossRef

20.

Khalid A, Jaat N, Sapit A, Razali A, Manshoor B, Zaman I (2015) Performance and emissions characteristics of crude jatropha oil biodiesel blends in a diesel engine. Int J Automot Mech Eng 11:2447–2457CrossRef

21.

Azad AK, Rasul MG, Mofijur M, Bhuiya MMK, Mondal SK, Sattar MK (2015) Energy and waste management for petroleum refining effluents: a case study in Bangladesh. Int J Automot Mech Eng 11:2170–2187CrossRef

22.

Heywood JB (1988) Internal combustion engine fundamentals. Tata McGraw Hill

Titel: Modelling of Biogas Fueled HCCI Engine for Various Inlet Conditions
verfasst von: Nihal Mishra
Shubham Mitra
Abhishek Thapliyal
Aniket Mahajan
M. Feroskhan
Verlag: Springer International Publishing
Buch: International Conference on Emerging Trends in Engineering (ICETE)
Print ISBN: 978-3-030-24313-5

Electronic ISBN: 978-3-030-24314-2

Copyright-Jahr: 2020
DOI: https://doi.org/10.1007/978-3-030-24314-2_48

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht