Nanomaterials-patterned flexible electrodes for wearable health monitoring: a review

1.

Rebovich ME, Vynias D, Frey MW (2010) Formation and functions of high-surface-area fabrics. Int J Fash Des, Technol Educ 3:129–134. https://doi.org/10.1080/17543266.2010.511279CrossRef

2.

Jakšić D, Jakšić N (2007) Assessment of porosity of flat textile fabrics. Text Res J 77:105–110. https://doi.org/10.1177/0040517506065892CrossRef

3.

Ozdemir H (2017) Permeability and wicking properties of modal and lyocell woven fabrics used for clothing. J Eng Fibers Fabr 12:155892501701200100. https://doi.org/10.1177/155892501701200102CrossRef

4.

Backer S (1951) The relationship between the structural geometry of a textile fabric and its physical properties: Part IV: interstice geometry and air permeability. Text Res J 21:703–714. https://doi.org/10.1177/004051755102101002CrossRef

5.

Cho J, Moon J, Jeong K, Cho G (2007) Application of PU-sealing into Cu/Ni electroless plated polyester fabrics for e-textiles. Fibers Polym 8:330–334. https://doi.org/10.1007/BF02877279CrossRef

6.

Ling H, Liu S, Zheng Z, Yan F (2018) Organic flexible electronics. Small Methods 2:1800070. https://doi.org/10.1002/smtd.201800070CrossRef

7.

Acar G, Ozturk O, Golparvar AJ et al (2019) Wearable and flexible textile electrodes for biopotential signal monitoring: a review. Electronics 8:479. https://doi.org/10.3390/electronics8050479CrossRef

8.

Heo JS, Eom J, Kim Y-H, Park SK (2018) Recent progress of textile-based wearable electronics: a comprehensive review of materials, devices, and applications. Small 14:1703034. https://doi.org/10.1002/smll.201703034CrossRef

9.

Zeng W, Shu L, Li Q et al (2014) Fiber-based wearable electronics: a review of materials, fabrication, devices, and applications. Adv Mater 26:5310–5336. https://doi.org/10.1002/adma.201400633CrossRef

10.

Possanzini L, Tessarolo M, Mazzocchetti L et al (2019) Impact of fabric properties on textile pressure sensors performance. Sensors 19:4686. https://doi.org/10.3390/s19214686CrossRef

11.

Gonçalves C, Silva A, Gomes J, Simoes R (2018) Wearable E-textile technologies: a review on sensors. Actuators Control Elem Inven 3:14. https://doi.org/10.3390/inventions3010014CrossRef

12.

Islam GMN, Ali A, Collie S (2020) Textile sensors for wearable applications: a comprehensive review. Cellulose 27:6103–6131. https://doi.org/10.1007/s10570-020-03215-5CrossRef

13.

Seyedin S, Zhang P, Naebe M et al (2019) Textile strain sensors: a review of the fabrication technologies, performance evaluation and applications. Mater Horiz 6:219–249. https://doi.org/10.1039/C8MH01062ECrossRef

14.

Peng Y, Cui Y (2020) Advanced textiles for personal thermal management and energy. Joule 4:724–742. https://doi.org/10.1016/j.joule.2020.02.011CrossRef

15.

Hu R, Liu Y, Shin S et al (2020) Emerging materials and strategies for personal thermal management. Adv Energy Mater 10:1903921. https://doi.org/10.1002/aenm.201903921CrossRef

16.

Peng L, Su B, Yu A, Jiang X (2019) Review of clothing for thermal management with advanced materials. Cellulose. https://doi.org/10.1007/s10570-019-02534-6CrossRef

17.

Park J (2020) Functional fibers, composites and textiles utilizing photothermal and joule heating. Polymers 12:189. https://doi.org/10.3390/polym12010189CrossRef

18.

Priya A, Kumar A, Chauhan B (2015) A review of textile and cloth fabric wearable antennas. Int J Comp App 116:975–8887. https://doi.org/10.5120/20425-2741CrossRef

19.

Roh J-S, Chi Y-S, Kang TJ (2010) Wearable textile antennas. Ints J Fash Des, Technol Educ 3:135–153. https://doi.org/10.1080/17543266.2010.521194CrossRef

20.

Loss C, Gonçalves R, Pinho P, Salvado R (2020) A review of methods for the electromagnetic characterization of textile materials for the development of wearable antennas. In: Georgiadis A (ed) Carvalho NB. Wireless power transmission for sustainable electronics, Wiley, pp 27–56

21.

Shahariar H, Soewardiman H, Jur JS (2017) Fabrication and packaging of flexible and breathable patch antennas on textiles. SoutheastCon 2017:1–5

22.

Nilsson E, Mateu L, Spies P, Hagström B (2014) Energy harvesting from piezoelectric textile fibers. Procedia Eng 87:1569–1572. https://doi.org/10.1016/j.proeng.2014.11.600CrossRef

23.

Hu Y, Zheng Z (2019) Progress in textile-based triboelectric nanogenerators for smart fabrics. Nano Energy 56:16–24. https://doi.org/10.1016/j.nanoen.2018.11.025CrossRef

24.

Xu L, Fu X, Liu F et al (2020) A perovskite solar cell textile that works at −40 to 160 °C. J Mater Chem A 8:5476–5483. https://doi.org/10.1039/C9TA13785HCrossRef

25.

Ahmad K (2020) Textiles in solar cell applications. In: Ahmed S, Sheikh JN (eds) Shabbir M. Frontiers of textile materials, Wiley, pp 203–217

26.

Jost K, Dion G, Gogotsi Y (2014) Textile energy storage in perspective. J Mater Chem A. https://doi.org/10.1039/C4TA00203BCrossRef

27.

Huang Q, Wang D, Zheng Z (2016) Textile-based electrochemical energy storage devices. Adv Energy Mater 6:1600783. https://doi.org/10.1002/aenm.201600783CrossRef

28.

Hui C, Kan C, Mak C, Chau K (2019) Flexible energy storage system—an introductory review of textile-based flexible supercapacitors. Processes 7:922. https://doi.org/10.3390/pr7120922CrossRef

29.

Tebyetekerwa M, Marriam I, Xu Z et al (2019) Critical insight: challenges and requirements of fibre electrodes for wearable electrochemical energy storage. Energy Environ Sci 12:2148–2160. https://doi.org/10.1039/C8EE02607FCrossRef

30.

Ghouri AS, Aslam R, Siddiqui MS, Sami SK (2020) recent progress in textile-based flexible supercapacitor. Front Mater. https://doi.org/10.3389/fmats.2020.00058CrossRef

31.

Sundriyal P, Bhattacharya S (2020) Textile-based supercapacitors for flexible and wearable electronic applications. Sci Rep 10:13259. https://doi.org/10.1038/s41598-020-70182-zCrossRef

32.

Gulzar U, Goriparti S, Miele E et al (2016) Next-generation textiles: from embedded supercapacitors to lithium ion batteries. J Mater Chem A 4:16771–16800. https://doi.org/10.1039/C6TA06437JCrossRef

33.

Normann M, Grethe T, Schwarz-Pfeiffer A, Ehrmann A (2017) Development and characterization of textile batteries. IOP Conf Ser: Mater Sci Eng 175:012058. https://doi.org/10.1088/1757-899X/175/1/012058CrossRef

34.

Lund A, Rundqvist K, Nilsson E et al (2018) Energy harvesting textiles for a rainy day: woven piezoelectrics based on melt-spun PVDF microfibres with a conducting core. Flex Electron 2(1):1–9

35.

Torah R, Lawrie-Ashton J, Li Y et al (2018) Energy-harvesting materials for smart fabrics and textiles. MRS Bull 43:214–219. https://doi.org/10.1557/mrs.2018.9CrossRef

36.

Gu Y, Zhang T, Chen H et al (2019) Mini review on flexible and wearable electronics for monitoring human health information. Nanoscale Res Lett 14:263. https://doi.org/10.1186/s11671-019-3084-xCrossRef

37.

Lu Y, Lou Z, Jiang K et al (2019) Recent progress of self-powered wearable monitoring systems integrated with microsupercapacitors. Materials Today Nano 8:100050. https://doi.org/10.1016/j.mtnano.2019.100050CrossRef

38.

Shi Q, He T, Lee C (2019) More than energy harvesting – Combining triboelectric nanogenerator and flexible electronics technology for enabling novel micro-/nano-systems. Nano Energy 57:851–871. https://doi.org/10.1016/j.nanoen.2019.01.002CrossRef

39.

Gualandi I, Marzocchi M, Achilli A et al (2016) Textile organic electrochemical transistors as a platform for wearable biosensors. Sci Rep 6:33637. https://doi.org/10.1038/srep33637CrossRef

40.

Gualandi I, Tessarolo M, Mariani F et al (2018) Nanoparticle gated semiconducting polymer for a new generation of electrochemical sensors. Sens Actuators, B Chem. https://doi.org/10.1016/j.snb.2018.06.109CrossRef

41.

Jia J, Xu C, Pan S et al (2018) Conductive thread-based textile sensor for continuous perspiration level monitoring. Sensors (Basel). https://doi.org/10.3390/s18113775CrossRef

42.

Kim J, Imani S, de Araujo WR et al (2015) Wearable salivary uric acid mouthguard biosensor with integrated wireless electronics. Biosens Bioelectron 74:1061–1068. https://doi.org/10.1016/j.bios.2015.07.039CrossRef

43.

An X, Stylios GK (2018) A hybrid textile electrode for electrocardiogram (ECG) measurement and motion tracking. Materials (Basel). https://doi.org/10.3390/ma11101887CrossRef

44.

Guo L, Sandsjö L, Ortiz-Catalan M, Skrifvars M (2020) Systematic review of textile-based electrodes for long-term and continuous surface electromyography recording. Text Res J 90:227–244. https://doi.org/10.1177/0040517519858768CrossRef

45.

Fleury A, Alizadeh M, Stefan G, Chau T (2017) Toward fabric-based EEG access technologies: seamless knit electrodes for a portable brain-computer interface. In: 2017 IEEE Life Sciences Conference (LSC). pp 35–38

46.

Lugoda P, Costa JC, Oliveira C et al (2019) Flexible temperature sensor integration into E-textiles using different industrial yarn fabrication processes. Sensors 20:73. https://doi.org/10.3390/s20010073CrossRef

47.

Cho H-S, Koo S-M, Lee J et al (2011) Heart monitoring garments using textile electrodes for healthcare applications. J Med Syst 35:189–201. https://doi.org/10.1007/s10916-009-9356-8CrossRef

48.

Cho G, Jeong K, Paik MJ et al (2011) Performance evaluation of textile-based electrodes and motion sensors for smart clothing. IEEE Sens J 11:3183–3193. https://doi.org/10.1109/JSEN.2011.2167508CrossRef

49.

Yu Y, Nyein HYY, Gao W, Javey A (2020) Flexible electrochemical bioelectronics: the rise of in situ bioanalysis. Adv Mater 32:1902083. https://doi.org/10.1002/adma.201902083CrossRef

50.

Agrawal DR, Tanabe Y, Weng D et al (2017) Conformal phased surfaces for wireless powering of bioelectronic microdevices. Nat Biomed Eng. https://doi.org/10.1038/s41551-017-0043CrossRef

51.

Khan Y, Ostfeld AE, Lochner CM et al (2016) monitoring of vital signs with flexible and wearable medical devices. Adv Mater 28:4373–4395. https://doi.org/10.1002/adma.201504366CrossRef

52.

Chung D, Gray BL (2019) Editors’ choice—development of screen-printed flexible multi-level microfluidic devices with integrated conductive nanocomposite polymer electrodes on textiles. J Electrochem Soc 166:B3116–B3124. https://doi.org/10.1149/2.0191909jesCrossRef

53.

Bhushan P, Umasankar Y, RoyChoudhury S et al (2019) Biosensor for monitoring uric acid in wound and its proximity: a potential wound diagnostic tool. J Electrochem Soc 166:B830–B836. https://doi.org/10.1149/2.1441910jesCrossRef

54.

Zhou Y, Ding X, Zhang J et al (2014) Fabrication of conductive fabric as textile electrode for ECG monitoring. Fibers Polym 15:2260–2264. https://doi.org/10.1007/s12221-014-2260-yCrossRef

55.

Bansal M, Gandhi B (2019) CNT based electrodes (wearable & textile-based) for cardiac monitoring in long term & continuous fashion. AIP Conf Proc 2201:020023. https://doi.org/10.1063/1.5141447CrossRef

56.

Beach C, Karim N, Casson AJ (2018) Performance of graphene ECG electrodes under varying conditions. In: 2018 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). pp 3813–3816

57.

Noh Y, Bales JR, Reyes BA et al (2016) Novel conductive carbon black and polydimethlysiloxane ecg electrode: a comparison with commercial electrodes in fresh, chlorinated, and salt water. Ann Biomed Eng 44:2464–2479. https://doi.org/10.1007/s10439-015-1528-8CrossRef

58.

Lam DV, Jo K, Kim C-H et al (2016) Activated carbon textile via chemistry of metal extraction for supercapacitors. ACS Nano 10:11351–11359. https://doi.org/10.1021/acsnano.6b06608CrossRef

59.

Zhang L, Fairbanks M, Andrew TL (2017) Rugged textile electrodes for wearable devices obtained by vapor coating off-the-shelf. Plain-Woven Fabrics Adv Funct Mater 27:1700415. https://doi.org/10.1002/adfm.201700415CrossRef

60.

Schwarz A, Hakuzimana J, Kaczynska A et al (2010) Gold coated para-aramid yarns through electroless deposition. Surf Coat Technol 204:1412–1418. https://doi.org/10.1016/j.surfcoat.2009.09.038CrossRef

61.

Foroughi J, Spinks GM, Wallace GG, Whitten PG (2008) Production of polypyrrole fibres by wet spinning. Synth Met 158:104–107. https://doi.org/10.1016/j.synthmet.2007.12.008CrossRef

62.

Zhang J, Seyedin S, Qin S et al (2019) Fast and scalable wet-spinning of highly conductive PEDOT:PSS fibers enables versatile applications. J Mater Chem A 7:6401–6410. https://doi.org/10.1039/C9TA00022DCrossRef

63.

Lima MD, Fang S, Lepro X et al (2011) Biscrolling nanotube sheets and functional guests into yarns. Science 331:51–55. https://doi.org/10.1126/science.1195912CrossRef

64.

Paul G, Torah R, Beeby S, Tudor J (2015) Novel active electrodes for ECG monitoring on woven textiles fabricated by screen and stencil printing. Sens Actuators, A 221:60–66. https://doi.org/10.1016/j.sna.2014.10.030CrossRef

65.

Zhou Z, Li Y, Cheng J et al (2018) Supersensitive all-fabric pressure sensors using printed textile electrode arrays for human motion monitoring and human–machine interaction. J Mater Chem C 6:13120–13127. https://doi.org/10.1039/C8TC02716ACrossRef

66.

Torah R, Wei Y, Li Y et al (2015) Printed textile-based electronic devices. In: Tao X (ed) Handbook of smart textiles. Springer Singapore, Singapore, pp 653–687CrossRef

67.

Mather RR, Wardman RH (2015) The chemistry of textile fibres, 2nd edn. Royal Society of Chemistry, CambridgeCrossRef

68.

Bunsell AR (2018) Introduction to the science of fibers. In: Bunsell AR (ed) Handbook of properties of textile and technical fibres. Woodhead Publishing, Netherlands, pp 1–20

69.

Cook JG (1984) Handbook of textile fibres: Natural Fibres. McGraw Hill Professional

70.

Denton MJ, Daniels PN (2002) Textile Terms and Definitions, 11th Revised, edition. The Textile Institute, Manchester, UK

71.

Chatterjee K, Ghosh TK (2020) 3D printing of textiles: potential roadmap to printing with fibers. Adv Mater 32:1902086. https://doi.org/10.1002/adma.201902086CrossRef

72.

Russell SJ, Institute T (2007) Handbook of nonwovens. CRC Press, Boca RatonCrossRef

73.

Adanur S (2019) Handbook of Weaving. CRC Press

74.

Au KF (2011) Advances in knitting technology. Woodhead Publ, OxfordCrossRef

75.

Mestrovic MA, Helmer RJN, Kyratzis L, Kumar D (2007) Preliminary study of dry knitted fabric electrodes for physiological monitoring. In: 2007 3rd International Conference on Intelligent Sensors, Sensor Networks and Information. https://doi.org/10.1109/ISSNIP.2007.4496911

76.

Muhammad Sayem AS, Hon Teay S, Shahariar H et al (2020) Review on smart electro-clothing systems (SeCSs). Sensors 20:587. https://doi.org/10.3390/s20030587CrossRef

77.

Xu PJ, Zhang H, Tao XM (2008) Textile-structured electrodes for electrocardiogram. Text Prog 40:183–213. https://doi.org/10.1080/00405160802597479CrossRef

78.

Takamatsu S, Itoh T (2016) Mechanical characterization of biomedical electrode on knit textile. In: 2016 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP). pp 1–4

79.

Karim N, Afroj S, Malandraki A et al (2017) All inkjet-printed graphene-based conductive patterns for wearable e-textile applications. J Mater Chem C 5:11640–11648. https://doi.org/10.1039/C7TC03669HCrossRef

80.

Shahariar H, Kim I, Soewardiman H, Jur JS (2019) Inkjet printing of reactive silver ink on textiles. ACS Appl Mater Interfac 11:6208–6216. https://doi.org/10.1021/acsami.8b18231CrossRef

81.

Ho DH, Cheon S, Hong P et al (2019) Multifunctional smart textronics with blow-spun nonwoven fabrics. Adv Func Mater 29:1900025. https://doi.org/10.1002/adfm.201900025CrossRef

82.

Sun M, Lv J, Xu H et al (2020) Smart cotton fabric screen-printed with viologen polymer: photochromic, thermochromic and ammonia sensing. Cellulose 27:2939–2952. https://doi.org/10.1007/s10570-020-02992-3CrossRef

83.

Li BM, Kim I, Zhou Y et al (2019) Kirigami-Inspired Textile Electronics: K.I.T.E. Adv Mater Technol 4(11):1900511. https://doi.org/10.1002/admt.201900511CrossRef

84.

Kang T-H, Merritt CR, Grant E et al (2008) Nonwoven fabric active electrodes for biopotential measurement during normal daily activity. IEEE Trans Biomed Eng 55:188–195. https://doi.org/10.1109/TBME.2007.910678CrossRef

85.

Zhao S, Li J, Cao D et al (2017) Recent advancements in flexible and stretchable electrodes for electromechanical sensors: strategies, materials, and features. ACS Appl Mater Interfac 9:12147–12164. https://doi.org/10.1021/acsami.6b13800CrossRef

86.

Heikenfeld J, Jajack A, Rogers J et al (2018) Wearable sensors: modalities, challenges, and prospects. Lab Chip 18:217–248. https://doi.org/10.1039/C7LC00914CCrossRef

87.

Park SI, Brenner DS, Shin G et al (2015) Soft, stretchable, fully implantable miniaturized optoelectronic systems for wireless optogenetics. Nat Biotechnol 33:1280–1286. https://doi.org/10.1038/nbt.3415CrossRef

88.

Park J, Lee Y, Hong J et al (2014) Giant tunneling piezoresistance of composite elastomers with interlocked microdome arrays for ultrasensitive and multimodal electronic skins. ACS Nano 8:4689–4697. https://doi.org/10.1021/nn500441kCrossRef

89.

Kim J-O, Kwon SY, Kim Y et al (2019) Highly ordered 3D microstructure-based electronic skin capable of differentiating pressure, temperature, and proximity. ACS Appl Mater Interfac 11:1503–1511. https://doi.org/10.1021/acsami.8b19214CrossRef

90.

Liu S, Zheng R, Chen S et al (2018) A compliant, self-adhesive and self-healing wearable hydrogel as epidermal strain sensor. J Mater Chem C 6:4183–4190. https://doi.org/10.1039/C8TC00157JCrossRef

91.

Benight SJ, Wang C, Tok JBH, Bao Z (2013) Stretchable and self-healing polymers and devices for electronic skin. Prog Polym Sci 38:1961–1977. https://doi.org/10.1016/j.progpolymsci.2013.08.001CrossRef

92.

Tadakaluru S, Thongsuwan W, Singjai P (2014) Stretchable and flexible high-strain sensors made using carbon nanotubes and graphite films on natural rubber. Sensors 14:868–876. https://doi.org/10.3390/s140100868CrossRef

93.

Economou A, Kokkinos C, Prodromidis M (2018) Flexible plastic, paper and textile lab-on-a chip platforms for electrochemical biosensing. Lab Chip 18:1812–1830. https://doi.org/10.1039/C8LC00025ECrossRef

94.

Tessarolo M, Gualandi I, Fraboni B (2018) recent progress in wearable fully textile chemical sensors. Adv Mater Technol 3:1700310. https://doi.org/10.1002/admt.201700310CrossRef

95.

Yuan L, Dai J, Fan X et al (2011) Self-cleaning flexible infrared nanosensor based on carbon nanoparticles. ACS Nano 5:4007–4013. https://doi.org/10.1021/nn200571qCrossRef

96.

Lee S-M, Kim SH, Lee JH et al (2018) Hydrophobic and stretchable Ag nanowire network electrode passivated by a sputtered PTFE layer for self-cleaning transparent thin film heaters. RSC Adv 8:18508–18518. https://doi.org/10.1039/C8RA00880ACrossRef

97.

Koehler A (2013) Challenges for eco-design of emerging technologies: the case of electronic textiles. Mater Des 51:51–60. https://doi.org/10.1016/j.matdes.2013.04.012CrossRef

98.

Paosangthong W, Torah R, Beeby S (2019) Recent progress on textile-based triboelectric nanogenerators. Nano Energy 55:401–423. https://doi.org/10.1016/j.nanoen.2018.10.036CrossRef

99.

Wang L, Zhang K (2020) Textile-based thermoelectric generators and their applications. Energy Environ Mater 3:67–79. https://doi.org/10.1002/eem2.12045CrossRef

100.

Ryu J, Gao Y, Cho JH, Choi S (2020) Horizontally structured microbial fuel cells in yarns and woven fabrics for wearable bioenergy harvesting. J Power Sources. https://doi.org/10.1016/j.jpowsour.2020.229271CrossRef

101.

Bandodkar AJ, Wang J (2016) Wearable biofuel cells: a review. Electroanalysis 28:1188–1200. https://doi.org/10.1002/elan.201600019CrossRef

102.

Wilson JIB, Mather RR (2019) Photovoltaic solar textiles. Proceedings 32:4. https://doi.org/10.3390/proceedings2019032004CrossRef

103.

Shrivas K, Ghosale A, Bajpai PK et al (2020) Advances in flexible electronics and electrochemical sensors using conducting nanomaterials: a review. Microchem J 156:104944. https://doi.org/10.1016/j.microc.2020.104944CrossRef

104.

Yan T, Wang Z, Pan Z-J (2018) Flexible strain sensors fabricated using carbon-based nanomaterials: a review. Curr Opin Solid State Mater Sci 22:213–228. https://doi.org/10.1016/j.cossms.2018.11.001CrossRef

105.

Wang Y, Liu A, Han Y, Li T (2020) Sensors based on conductive polymers and their composites: a review. Polym Int 69:7–17. https://doi.org/10.1002/pi.5907CrossRef

106.

Hasan MM, Hossain MdM, Chowdhury HK (2020) Two-dimensional MXene-based flexible nanostructures for functional nanodevices: a review. J Mater Chem A. https://doi.org/10.1039/D0TA11103ACrossRef

107.

Post ER, Orth M, Russo PR, Gershenfeld N (2000) E-broidery: Design and fabrication of textile-based computing. IBM Syst J 39:840–860. https://doi.org/10.1147/sj.393.0840CrossRef

108.

Chou K-S, Huang K-C, Lee H-H (2005) Fabrication and sintering effect on the morphologies and conductivity of nano-Ag particle films by the spin coating method. Nanotechnology 16:779–784. https://doi.org/10.1088/0957-4484/16/6/027CrossRef

109.

Gomes P, Tama D, Carvalho H, Souto AP (2020) Resistance variation of conductive ink applied by the screen printing technique on different substrates. Coloration Technol cote. https://doi.org/10.1111/cote.12451CrossRef

110.

Naghdi S, Rhee KY, Hui D, Park SJ (2018) A review of conductive metal nanomaterials as conductive, transparent, and flexible coatings, thin films, and conductive fillers: different deposition methods and applications. Coatings 8:278. https://doi.org/10.3390/coatings8080278CrossRef

111.

Momtaz Islam Md, Reza MA, Ahmed DM et al (2019) Facile metallization technique of textiles for electronic textile applications. In: Majumdar A, Gupta D, Gupta S (eds) Functional textiles and clothing. Springer, Singapore, pp 91–99CrossRef

112.

Sreeju N, Rufus A, Philip D (2016) Microwave-assisted rapid synthesis of copper nanoparticles with exceptional stability and their multifaceted applications. J Mol Liq 221:1008–1021. https://doi.org/10.1016/j.molliq.2016.06.080CrossRef

113.

Roshanghias A, Krivec M, Baumgart M (2017) Sintering strategies for inkjet printed metallic traces in 3D printed electronics. Flex Print Electron 2:045002. https://doi.org/10.1088/2058-8585/aa8ed8CrossRef

114.

Zhang Z, Zhang X, Xin Z et al (2013) controlled inkjetting of a conductive pattern of silver nanoparticles based on the coffee-ring effect. Adv Mater 25:6714–6718. https://doi.org/10.1002/adma.201303278CrossRef

115.

Siqueira JR, Oliveira ON (2017) 9 - Carbon-based nanomaterials. In: Da Róz AL, Ferreira M, de Lima LF, Oliveira ON (eds) Nanostructures. William Andrew Publishing, USA, pp 233–249CrossRef

116.

Jang H, Park YJ, Chen X et al (2016) Graphene-based flexible and stretchable electronics. Adv Mater 28:4184–4202. https://doi.org/10.1002/adma.201504245CrossRef

117.

Zhang S, Cheng Y, Xu W et al (2017) Dispersibility of different sized graphene oxide sheets and their reinforcement on polyamide 6 fibers. RSC Adv 7:56682–56690. https://doi.org/10.1039/C7RA12261FCrossRef

118.

Konkena B, Vasudevan S (2012) Understanding aqueous dispersibility of graphene oxide and reduced graphene oxide through pKa measurements. J Phys Chem Lett 3:867–872. https://doi.org/10.1021/jz300236wCrossRef

119.

Rao S, Upadhyay J, Polychronopoulou K et al (2018) Reduced graphene oxide: effect of reduction on electrical conductivity. J Compos Sci 2:25. https://doi.org/10.3390/jcs2020025CrossRef

120.

Cai L, Wang C (2015) Carbon nanotube flexible and stretchable electronics. Nanoscale Res Lett 10:320. https://doi.org/10.1186/s11671-015-1013-1CrossRef

121.

Nessim GD (2010) Properties, synthesis, and growth mechanisms of carbon nanotubes with special focus on thermal chemical vapor deposition. Nanoscale 2:1306–1323. https://doi.org/10.1039/B9NR00427KCrossRef

122.

Li QW, Li Y, Zhang XF et al (2007) Structure-dependent electrical properties of carbon nanotube fibers. Adv Mater 19:3358–3363. https://doi.org/10.1002/adma.200602966CrossRef

123.

Sadi MdS, Pan J, Xu A et al (2019) Direct dip-coating of carbon nanotubes onto polydopamine-templated cotton fabrics for wearable applications. Cellulose 26:7569–7579. https://doi.org/10.1007/s10570-019-02628-1CrossRef

124.

Cummins G, Desmulliez MPY (2012) Inkjet printing of conductive materials: a review. Circuit World 38:193–213. https://doi.org/10.1108/03056121211280413CrossRef

125.

Azoubel S, Magdassi S (2010) The formation of carbon nanotube dispersions by high pressure homogenization and their rapid characterization by analytical centrifuge. Carbon 48:3346–3352. https://doi.org/10.1016/j.carbon.2010.05.024CrossRef

126.

Guo X, Huang Y, Cai X et al (2016) Capacitive wearable tactile sensor based on smart textile substrate with carbon black\hspace0. 167em/silicone rubber composite dielectric. Meas Sci Technol 27(4):045105CrossRef

127.

Jost K, Stenger D, R. Perez C, et al (2013) Knitted and screen printed carbon-fiber supercapacitors for applications in wearable electronics. Energy Environ Sci 6:2698–2705. https://doi.org/10.1039/C3EE40515JCrossRef

128.

Pang AL, Arsad A, Ahmadipour M (2021) Synthesis and factor affecting on the conductivity of polypyrrole: a short review. Polym Adv Technol 32:1428–1454. https://doi.org/10.1002/pat.5201CrossRef

129.

Tseghai GB, Mengistie DA, Malengier B et al (2020) PEDOT:PSS-based conductive textiles and their applications. Sensors 20:1881. https://doi.org/10.3390/s20071881CrossRef

130.

K N, Rout CS, (2021) Conducting polymers: a comprehensive review on recent advances in synthesis, properties and applications. RSC Adv 11:5659–5697. https://doi.org/10.1039/D0RA07800JCrossRef

131.

Liu J, Wang X, Li D et al (2015) Thermal conductivity and elastic constants of PEDOT:PSS with high electrical conductivity. Macromolecules 48:585–591. https://doi.org/10.1021/ma502099tCrossRef

132.

Kim YH, Sachse C, Machala ML et al (2011) Highly conductive PEDOT:PSS electrode with optimized solvent and thermal post-treatment for ITO-free organic solar cells. Adv Func Mater 21:1076–1081. https://doi.org/10.1002/adfm.201002290CrossRef

133.

Miles LWC, Society of Dyers and Colourists (1994) Textile printing, 2nd edn. Society of Dyers and Colourists, Bradford

134.

Basiricò L, Cosseddu P, Fraboni B, Bonfiglio A (2011) Inkjet printing of transparent, flexible, organic transistors. Thin Solid Films 520:1291–1294. https://doi.org/10.1016/j.tsf.2011.04.188CrossRef

135.

Cui Z (2016) Printed electronics: materials, technologies and applications. Wiley/Higher Education Press, Hoboken, NJ, Solaris South Tower, SingaporeCrossRef

136.

Suganuma K (2014) Introduction to Printed Electronics. Springer, New York, NYCrossRef

137.

Kamyshny A, Magdassi S (2019) Conductive nanomaterials for 2D and 3D printed flexible electronics. Chem Soc Rev 48:1712–1740. https://doi.org/10.1039/C8CS00738ACrossRef

138.

Leach RH (2007) The Printing ink manual. Springer, Dordrecht

139.

Flick EW (1999) Printing ink and overprint varnish formulations, 2nd edn. Noyes Publications/William Andrew Pub, Norwich, N.Y.

140.

Streitberger H-J, Goldschmidt A (2018) BASF Handbook Basics of Coating Technology, 3rd, revised. Vincentz, Hannover

141.

Sreenilayam SP, Ahad IU, Nicolosi V et al (2020) Advanced materials of printed wearables for physiological parameter monitoring. Mater Today 32:147–177. https://doi.org/10.1016/j.mattod.2019.08.005CrossRef

142.

Karim N, Afroj S, Tan S et al (2019) All inkjet-printed graphene-silver composite ink on textiles for highly conductive wearable electronics applications. Sci Rep 9:1–10. https://doi.org/10.1038/s41598-019-44420-yCrossRef

143.

Nomura K, Horii Y, Kanazawa S et al (2018) Fabrication of a textile-based wearable blood leakage sensor using screen-offset printing. Sensors 18:240. https://doi.org/10.3390/s18010240CrossRef

144.

Pani D, Dessì A, Saenz-Cogollo JF et al (2016) Fully textile, PEDOT:PSS based electrodes for wearable ECG monitoring systems. IEEE Trans Biomed Eng 63:540–549. https://doi.org/10.1109/TBME.2015.2465936CrossRef

145.

Kim I, Shahariar H, Ingram WF et al (2019) Inkjet process for conductive patterning on textiles: maintaining inherent stretchability and breathability in knit structures. Adv Func Mater 29:1807573. https://doi.org/10.1002/adfm.201807573CrossRef

146.

Xu X, Luo M, He P et al (2019) Screen printed graphene electrodes on textile for wearable electrocardiogram monitoring. Appl Phys A 125:714. https://doi.org/10.1007/s00339-019-3006-xCrossRef

147.

Sinha SK, Noh Y, Reljin N et al (2017) Screen-printed PEDOT:PSS electrodes on commercial finished textiles for electrocardiography. ACS Appl Mater Interfac 9:37524–37528. https://doi.org/10.1021/acsami.7b09954CrossRef

148.

Cruz SMF, Rocha LA, Viana JC (2018) Printing technologies on flexible substrates for printed electronics. Flex Electron. https://doi.org/10.5772/intechopen.76161CrossRef

149.

Huang Q, Zhu Y (2019) Printing conductive nanomaterials for flexible and stretchable electronics: a review of materials, processes, and applications. Adv Mater Technol 4:1800546. https://doi.org/10.1002/admt.201800546CrossRef

150.

Blayo A, Pineaux B (2005) Printing processes and their potential for RFID printing. In: Proceedings of the 2005 joint conference on Smart objects and ambient intelligence innovative context-aware services: usages and technologies sOc-EUSAI ’05. ACM Press, Grenoble, France, p 27

151.

Sung D, de la Fuente VA, Subramanian V (2010) Scaling and optimization of gravure-printed silver nanoparticle lines for printed electronics. IEEE Trans Comp Packag Technol 33:105–114. https://doi.org/10.1109/TCAPT.2009.2021464CrossRef

152.

Lee T-M, Lee S-H, Noh J-H et al (2010) The effect of shear force on ink transfer in gravure offset printing. J Micromech Microeng 20:125026. https://doi.org/10.1088/0960-1317/20/12/125026CrossRef

153.

Julin T (2012) Flexo-printed piezoelectric PVDF pressure sensors

154.

Qin D, Xia Y, Whitesides GM (2010) Soft lithography for micro- and nanoscale patterning. Nat Protoc 5:491–502. https://doi.org/10.1038/nprot.2009.234CrossRef

155.

Kamyshny A (2011) Metal-based Inkjet Inks for Printed Electronics. TOAPJ 4:19–36. https://doi.org/10.2174/1874183501104010019CrossRef

156.

Fuller SB, Wilhelm EJ, Jacobson JM (2002) Ink-jet printed nanoparticle microelectromechanical systems. J Microelectromech Syst 11:54–60. https://doi.org/10.1109/84.982863CrossRef

157.

Perelaer J, S. U (2010) Inkjet printing and alternative sintering of narrow conductive tracks on flexible substrates for plastic electronic applications. In: Turcu C (ed) Radio frequency identification fundamentals and applications design methods and solutions. InTech

158.

Arnold CB, Piqué A (2007) Laser direct-write processing. MRS Bull 32:9–15. https://doi.org/10.1557/mrs2007.9CrossRef

159.

Christenson KK, Paulsen JA, Renn MJ, et al (2011) Direct printing of circuit boards using aerosol Jet&reg, International conference; 27th, Digital printing technologies; Digital fabrication. In: Digital printing technologies; Digital fabrication, International Conference On Digital Printing Technologies, International conference; 27th, Digital printing technologies; Digital fabrication. IS&T –the Society for Imaging Science and Technology;, Springfield, Va., pp 433–436

160.

Hannebauer H, Dullweber T, Falcon T, Brendel R (2013) Fineline printing options for high efficiencies and low ag paste consumption. Energy Procedia 38:725–731. https://doi.org/10.1016/j.egypro.2013.07.339CrossRef

161.

Novaković D, Kašiković N, Vladić G, Pál M (2016) 15 - Screen Printing. In: Izdebska J, Thomas S (eds) Printing on Polymers. William Andrew Publishing, Netherlands, pp 247–261CrossRef

162.

Kang B, Lee WH, Cho K (2013) Recent advances in organic transistor printing processes. ACS Appl Mater Interfac 5:2302–2315. https://doi.org/10.1021/am302796zCrossRef

163.

Halonen E, Viiru T, Ostman K et al (2013) Oven sintering process optimization for inkjet-printed ag nanoparticle ink. IEEE Trans Compon, Packag Manufact Technol 3:350–356. https://doi.org/10.1109/TCPMT.2012.2226458CrossRef

164.

Niittynen J, Abbel R, Mäntysalo M et al (2014) Alternative sintering methods compared to conventional thermal sintering for inkjet printed silver nanoparticle ink. Thin Solid Films 556:452–459. https://doi.org/10.1016/j.tsf.2014.02.001CrossRef

165.

Clark D (2010) Major trends in gravure printed electronics. Graphic Communication

166.

Takamatsu S, Lonjaret T, Crisp D et al (2015) Direct patterning of organic conductors on knitted textiles for long-term electrocardiography. Sci Rep 5:15003. https://doi.org/10.1038/srep15003CrossRef

167.

Paul GM, Cao F, Torah R et al (2014) A smart textile based facial EMG and EOG computer interface. IEEE Sens J 14:393–400. https://doi.org/10.1109/JSEN.2013.2283424CrossRef

168.

Achilli A, Bonfiglio A, Pani D (2018) Design and characterization of screen-printed textile electrodes for ECG monitoring. IEEE Sens J 18:4097–4107. https://doi.org/10.1109/JSEN.2018.2819202CrossRef

169.

Pani D, Achilli A, Spanu A et al (2019) Validation of polymer-based screen-printed textile electrodes for surface EMG detection. IEEE Trans Neural Syst Rehabil Eng 27:1370–1377. https://doi.org/10.1109/TNSRE.2019.2916397CrossRef

170.

Achilli A, Pani D, Bonfiglio A (2017) Characterization of screen-printed textile electrodes based on conductive polymer for ECG acquisition. In: 2017 Computing in Cardiology (CinC). pp 1–4

171.

Jung M, Jeon S, Bae J (2018) Scalable and facile synthesis of stretchable thermoelectric fabric for wearable self-powered temperature sensors. RSC Adv 8:39992–39999. https://doi.org/10.1039/C8RA06664GCrossRef

172.

Jin H, Matsuhisa N, Lee S et al (2017) Enhancing the performance of stretchable conductors for E-textiles by controlled ink permeation. Adv Mater 29:1605848. https://doi.org/10.1002/adma.201605848CrossRef

173.

Lahti M, Leppävuori S, Lantto V (1999) Gravure-offset-printing technique for the fabrication of solid films. Appl Surf Sci 142:367–370. https://doi.org/10.1016/S0169-4332(98)00676-XCrossRef

174.

Shin K-H, Nguyen HAD, Park J et al (2017) Roll-to-roll gravure printing of thick-film silver electrode micropatterns for flexible printed circuit board. J Coat Technol Res 14:95–106. https://doi.org/10.1007/s11998-016-9844-yCrossRef

175.

Kopola P, Aernouts T, Guillerez S et al (2010) High efficient plastic solar cells fabricated with a high-throughput gravure printing method. Sol Energy Mater Sol Cells 94:1673–1680. https://doi.org/10.1016/j.solmat.2010.05.027CrossRef

176.

Wang G, Adil MA, Zhang J, Wei Z (2019) Large-area organic solar cells: material requirements, modular designs, and printing methods. Adv Mater 31:1805089. https://doi.org/10.1002/adma.201805089CrossRef

177.

Merklein L, Daume D, Braig F et al (2019) Comparative study of printed multilayer OLED fabrication through slot die coating, gravure and inkjet printing, and their combination. Colloids Interfac 3:32. https://doi.org/10.3390/colloids3010032CrossRef

178.

Park J, Nguyen HAD, Park S et al (2015) Roll-to-roll gravure printed silver patterns to guarantee printability and functionality for mass production. Curr Appl Phys 15:367–376. https://doi.org/10.1016/j.cap.2015.01.007CrossRef

179.

Ohsawa M, Hashimoto N, Takeda N et al (2020) Bending reliability of transparent electrode of printed invisible silver-grid/PEDOT:PSS on flexible epoxy film substrate for powder electroluminescent device. Microelectron Reliab 109:113673. https://doi.org/10.1016/j.microrel.2020.113673CrossRef

180.

Honarvar MG, Latifi M (2017) Overview of wearable electronics and smart textiles. J Text Inst 108:631–652. https://doi.org/10.1080/00405000.2016.1177870CrossRef

181.

Zhong ZW, Ee JH, Chen SH, Shan XC (2020) Parametric investigation of flexographic printing processes for R2R printed electronics. Mater Manuf Processes 35:564–571. https://doi.org/10.1080/10426914.2020.1732411CrossRef

182.

Gajadhur M, Regulska M (2020) Mechanical and light resistance of flexographic conductive ink films intended for printed electronics. Dyes Pigm 178:108381. https://doi.org/10.1016/j.dyepig.2020.108381CrossRef

183.

Morgan ML, Curtis DJ, Deganello D (2019) Control of morphological and electrical properties of flexographic printed electronics through tailored ink rheology. Org Electron 73:212–218. https://doi.org/10.1016/j.orgel.2019.05.027CrossRef

184.

Cano-Raya C, Denchev ZZ, Cruz SF, Viana JC (2019) Chemistry of solid metal-based inks and pastes for printed electronics – a review. Appl Mater Today 15:416–430. https://doi.org/10.1016/j.apmt.2019.02.012CrossRef

185.

Calvert P (2001) Inkjet printing for materials and devices. Chem Mater 13:3299–3305. https://doi.org/10.1021/cm0101632CrossRef

186.

de Gans B-J, Duineveld PC, Schubert US (2004) Inkjet printing of polymers: state of the art and future developments. Adv Mater 16:203–213. https://doi.org/10.1002/adma.200300385CrossRef

187.

Singh M, Haverinen HM, Dhagat P, Jabbour GE (2010) inkjet printing-process and its applications. Adv Mater 22:673–685. https://doi.org/10.1002/adma.200901141CrossRef

188.

Wu J, Wang R, Yu H et al (2015) Inkjet-printed microelectrodes on PDMS as biosensors for functionalized microfluidic systems. Lab Chip 15:690–695. https://doi.org/10.1039/C4LC01121JCrossRef

189.

Hutchings IM, Martin GD (2014) Introduction to inkjet printing for manufacturing. In: Hutchings IM, Martin GD (eds) Inkjet Technology for Digital Fabrication. Wiley, Chichester, UK, pp 1–20

190.

Derby B (2010) Inkjet printing of functional and structural materials: fluid property requirements, feature stability, and resolution. Annu Rev Mater Res 40:395–414. https://doi.org/10.1146/annurev-matsci-070909-104502CrossRef

191.

Minemawari H, Yamada T, Matsui H et al (2011) Inkjet printing of single-crystal films. Nature 475:364–367. https://doi.org/10.1038/nature10313CrossRef

192.

Li D, Sutton D, Burgess A et al (2009) Conductive copper and nickel lines via reactive inkjet printing. J Mater Chem 19:3719–3724. https://doi.org/10.1039/B820459DCrossRef

193.

Smith PJ, Morrin A (2012) Reactive inkjet printing. J Mater Chem 22:10965–10970. https://doi.org/10.1039/C2JM30649BCrossRef

194.

Derby B, Reis N (2003) Inkjet printing of highly loaded particulate suspensions. MRS Bull 28:815–818. https://doi.org/10.1557/mrs2003.230CrossRef

195.

Deegan RD, Bakajin O, Dupont TF et al (1997) Capillary flow as the cause of ring stains from dried liquid drops. Nature 389:827–829. https://doi.org/10.1038/39827CrossRef

196.

Ahn BY, Duoss EB, Motala MJ et al (2009) Omnidirectional printing of flexible, stretchable, and spanning silver microelectrodes. Science 323:1590–1593. https://doi.org/10.1126/science.1168375CrossRef

197.

Friederich A, Binder JR, Bauer W (2013) Rheological control of the coffee stain effect for inkjet printing of ceramics. J Am Ceram Soc 96:2093–2099. https://doi.org/10.1111/jace.12385CrossRef

198.

Arias AC, MacKenzie JD, McCulloch I et al (2010) Materials and applications for large area electronics: solution-based approaches. Chem Rev 110:3–24. https://doi.org/10.1021/cr900150bCrossRef

199.

Ruiz C, García-Frutos EM, Hennrich G, Gómez-Lor B (2012) Organic semiconductors toward electronic devices: high mobility and easy processability. J Phys Chem Lett 3:1428–1436. https://doi.org/10.1021/jz300251uCrossRef

200.

Wang C, Takei K, Takahashi T, Javey A (2013) Carbon nanotube electronics – moving forward. Chem Soc Rev 42:2592–2609. https://doi.org/10.1039/C2CS35325CCrossRef

201.

Arapov K, Abbel R, de With G, Friedrich H (2014) Inkjet printing of graphene. Faraday Discuss 173:323–336. https://doi.org/10.1039/C4FD00067FCrossRef

202.

Finn DJ, Lotya M, Cunningham G et al (2014) Inkjet deposition of liquid-exfoliated graphene and MoS2 nanosheets for printed device applications. J Mater Chem C 2:925–932. https://doi.org/10.1039/C3TC31993HCrossRef

203.

Capasso A, Del Rio Castillo AE, Sun H et al (2015) Ink-jet printing of graphene for flexible electronics: an environmentally-friendly approach. Solid State Commun 224:53–63. https://doi.org/10.1016/j.ssc.2015.08.011CrossRef

204.

Tao H, Marelli B, Yang M et al (2015) Inkjet printing of regenerated silk fibroin: from printable forms to printable functions. Adv Mater 27:4273–4279. https://doi.org/10.1002/adma.201501425CrossRef

205.

Stempien Z, Rybicki E, Rybicki T, Kozanecki M (2016) Reactive inkjet printing of PEDOT electroconductive layers on textile surfaces. Synth Met 217:276–287. https://doi.org/10.1016/j.synthmet.2016.04.014CrossRef

206.

Kinkeldei T, Mattana G, Leuenberger D, et al (2013) Feasibility of printing woven humidity and temperature sensors for the integration into electronic textiles. In: Advances in Science and Technology. /AST.80.77. Accessed 5 Jul 2020

207.

La T-G, Qiu S, Scott DK et al (2018) Two-layered and stretchable e-textile patches for wearable healthcare electronics. Adv Healthcare Mater 7:1801033. https://doi.org/10.1002/adhm.201801033CrossRef

208.

Shahrubudin N, Lee TC, Ramlan R (2019) An overview on 3D printing technology: technological, materials, and applications. Procedia Manuf 35:1286–1296. https://doi.org/10.1016/j.promfg.2019.06.089CrossRef

209.

Lemu HG (2012) Study of capabilities and limitations of 3D printing technology. AIP Conf Proc 1431:857–865. https://doi.org/10.1063/1.4707644CrossRef

210.

Tofail SAM, Koumoulos EP, Bandyopadhyay A et al (2018) Additive manufacturing: scientific and technological challenges, market uptake and opportunities. Mater Today 21:22–37. https://doi.org/10.1016/j.mattod.2017.07.001CrossRef

211.

Redwood B, Schöffer F, Garret B (2017) The 3D printing handbook: Technologies, design and applications. 3D HUBS, Amsterdam

212.

Sun Z, Velásquez-García LF (2017) Monolithic FFF-printed, biocompatible, biodegradable, dielectric-conductive microsystems. J Microelectromech Syst 26:1356–1370. https://doi.org/10.1109/JMEMS.2017.2746627CrossRef

213.

Hlavaty DG, Ashtiani-Zarandi M (1998) Method for making an electrode for electrical discharge machining by use of a stereolithography model

214.

Czelusniak T, Amorim FL, Higa CF, Lohrengel A (2014) Development and application of new composite materials as EDM electrodes manufactured via selective laser sintering. Int J Adv Manuf Technol 72:1503–1512. https://doi.org/10.1007/s00170-014-5765-zCrossRef

215.

Dilag J, Chen T, Li S, Bateman SA (2019) Design and direct additive manufacturing of three-dimensional surface micro-structures using material jetting technologies. Addit Manuf 27:167–174. https://doi.org/10.1016/j.addma.2019.01.009CrossRef

216.

Azhari A, Marzbanrad E, Yilman D et al (2017) Binder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes. Carbon 119:257–266. https://doi.org/10.1016/j.carbon.2017.04.028CrossRef

217.

Justin DF, Stucker BE, Gabbita DJR, Britt DW (2011) Laser based metal deposition (LBMD) of antimicrobials to implant surfaces

218.

Hahnlen R, Dapino MJ (2010) Active metal-matrix composites with embedded smart materials by ultrasonic additive manufacturing. In: Industrial and Commercial Applications of Smart Structures Technologies 2010. International Society for Optics and Photonics, p 76450O

219.

Chen C, Mehl BT, Munshi AS et al (2016) 3D-printed microfluidic devices: fabrication, advantages and limitations—a mini review. Anal Methods 8:6005–6012. https://doi.org/10.1039/C6AY01671ECrossRef

220.

Ni Y, Ji R, Long K et al (2017) A review of 3D-printed sensors. Appl Spectrosc Rev 52:623–652. https://doi.org/10.1080/05704928.2017.1287082CrossRef

221.

Wang Y, Chen C, Xie H et al (2017) 3D-printed all-fiber li-ion battery toward wearable energy storage. Adv Func Mater 27:1703140. https://doi.org/10.1002/adfm.201703140CrossRef

222.

Liu Y, Hamid Q, Snyder J et al (2016) Evaluating fabrication feasibility and biomedical application potential of in situ 3D printing technology. Rapid Prototy J 22:947–955. https://doi.org/10.1108/RPJ-07-2015-0090CrossRef

223.

Bogue R (2013) 3D printing: the dawn of a new era in manufacturing? Assem Autom 33:307–311. https://doi.org/10.1108/AA-06-2013-055CrossRef

224.

Isharya launches India’s first 3D printed jewellery collection. In: Elle India. https://elle.in/article/isharya-3d-printed-jewellery-collection/. Accessed 9 Jul 2020

225.

Dilberoglu UM, Gharehpapagh B, Yaman U, Dolen M (2017) The role of additive manufacturing in the era of industry 4.0. Procedia Manuf 11:545–554. https://doi.org/10.1016/j.promfg.2017.07.148CrossRef

226.

Vanderploeg A, Lee S-E, Mamp M (2017) The application of 3D printing technology in the fashion industry. Int J Fash Des, Technol Educ 10:170–179. https://doi.org/10.1080/17543266.2016.1223355CrossRef

227.

Cao W, Ma C, Mao D et al (2019) MXene-reinforced cellulose nanofibril inks for 3D-printed smart fibres and textiles. Adv Funct Mater 29:1905898. https://doi.org/10.1002/adfm.201905898CrossRef

228.

Zhao J, Zhang Y, Huang Y et al (2018) 3D printing fiber electrodes for an all-fiber integrated electronic device via hybridization of an asymmetric supercapacitor and a temperature sensor. Adv Sci 5:1801114. https://doi.org/10.1002/advs.201801114CrossRef

229.

Tadesse MG, Dumitrescu D, Loghin C et al (2018) 3D printing of NinjaFlex filament onto PEDOT:PSS-coated textile fabrics for electroluminescence applications. J Elec Mater 47:2082–2092. https://doi.org/10.1007/s11664-017-6015-6CrossRef

230.

Shahariar H, Kim I, Bhakta R, Jur J (2020) Direct-write printing process of conductive paste on fiber bulks for wearable textile heaters. Smart Mater Struct. https://doi.org/10.1088/1361-665X/ab8c25CrossRef

231.

Torah R, Wei Y, Li Y et al (2015) Fully direct write dispenser printed sound emitting smart fabrics. Electron Lett. https://doi.org/10.1049/el.2015.0235CrossRef

232.

Bhakta RP Direct-write printed wearable textile electronics. Ph.D., North Carolina State University

233.

Lewis JA (2006) Direct ink writing of 3D functional materials. Adv Funct Mater 16:2193–2204. https://doi.org/10.1002/adfm.200600434CrossRef

234.

Mwema FM, Akinlabi ET (2020) Basics of Fused Deposition Modelling (FDM). In: Mwema FM, Akinlabi ET (eds) Fused Deposition Modeling: Strategies for Quality Enhancement. Springer International Publishing, Cham, pp 1–15CrossRef

235.

Melnikova R, Ehrmann A, Finsterbusch K (2014) 3D printing of textile-based structures by Fused Deposition Modelling (FDM) with different polymer materials. IOP Conf Ser: Mater Sci Eng 62:012018. https://doi.org/10.1088/1757-899X/62/1/012018CrossRef

236.

Hashemi Sanatgar R, Campagne C, Nierstrasz V (2017) Investigation of the adhesion properties of direct 3D printing of polymers and nanocomposites on textiles: Effect of FDM printing process parameters. Appl Surf Sci 403:551–563. https://doi.org/10.1016/j.apsusc.2017.01.112CrossRef

237.

Richter C, Schmülling S, Ehrmann A, Finsterbusch K (2015) FDM printing of 3D forms with embedded fibrous materials. Design Manufacturing and Mechatronics. World Scientific, Singapore, pp 961–969CrossRef

238.

Bártolo PJ (2011) Stereolithographic Processes. In: Bártolo PJ (ed) Stereolithography: Materials, Processes and Applications. Springer, US, Boston, MA, pp 1–36CrossRef

239.

Appuhamillage GA, Chartrain N, Meenakshisundaram V et al (2019) 110th anniversary: vat photopolymerization-based additive manufacturing: current trends and future directions in materials design. Ind Eng Chem Res 58:15109–15118. https://doi.org/10.1021/acs.iecr.9b02679CrossRef

240.

Fouassier J-P (1995) Photoinitiation, photopolymerization, and photocuring: fundamentals and applications. Distributed by Hanser/Gardner Publications, Munich; New York; Cincinnati, Hanser

241.

Grothe T, Brockhagen B, Storck JL (2020) Three-dimensional printing resin on different textile substrates using stereolithography: a proof of concept. J Eng Fibers Fabr 15:1558925020933440. https://doi.org/10.1177/1558925020933440CrossRef

242.

Chakraborty S, Biswas MC (2020) 3D printing technology of polymer-fiber composites in textile and fashion industry: a potential roadmap of concept to consumer. Compos Struct 248:112562. https://doi.org/10.1016/j.compstruct.2020.112562CrossRef

243.

Sitotaw DB, Ahrendt D, Kyosev Y, Kabish AK (2020) Additive manufacturing and textiles—state-of-the-art. Appl Sci 10:5033. https://doi.org/10.3390/app10155033CrossRef

244.

Ojuroye O, Torah R, Beeby S, Wilde A (2017) Smart Textiles for Smart Home Control and Enriching Future Wireless Sensor Network Data. In: Postolache OA, Mukhopadhyay SC, Jayasundera KP, Swain AK (eds) Sensors for Everyday Life: Healthcare Settings. Springer International Publishing, Cham, pp 159–183CrossRef

245.

Lin X, Seet B-C, Joseph F (2017) Wireless Sensing Systems for Body Area Networks. In: Postolache OA, Mukhopadhyay SC, Jayasundera KP, Swain AK (eds) Sensors for Everyday Life: Healthcare Settings. Springer International Publishing, Cham, pp 221–239CrossRef

246.

Ahmed IS, Kamardin K, Yamada Y, et al (2019) IoT Enabled Wireless Health Monitoring System Using Textile Antenna. In: 2019 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE). pp 1–6

247.

Cochrane C, Hertleer C, Schwarz-Pfeiffer A (2016) 2 - Smart textiles in health: An overview. In: Koncar V (ed) Smart Textiles and their Applications. Woodhead Publishing, Oxford, pp 9–32CrossRef

248.

Postolache G, Carvalho H, Catarino A, Postolache OA (2017) Smart Clothes for Rehabilitation Context: Technical and Technological Issues. In: Postolache OA, Mukhopadhyay SC, Jayasundera KP, Swain AK (eds) Sensors for Everyday Life: Healthcare Settings. Springer International Publishing, Cham, pp 185–219CrossRef

249.

Hatamie A, Angizi S, Kumar S et al (2020) Review—textile based chemical and physical sensors for healthcare monitoring. J Electrochem Soc 167:037546. https://doi.org/10.1149/1945-7111/ab6827CrossRef

250.

Naït-Ali A, Karasinski P (2009) Biosignals: Acquisition and General Properties. In: Naït-Ali A (ed) Advanced Biosignal Processing. Springer, Berlin, Heidelberg, pp 1–13CrossRef

251.

Hoi-Jun Yoo, Yoo J, Long Yan (2010) Wireless fabric patch sensors for wearable healthcare. In: 2010 Annual International Conference of the IEEE Engineering in Medicine and Biology. IEEE, Buenos Aires, pp 5254–5257

252.

Paul G, Torah R, Beeby S, Tudor J (2014) The development of screen printed conductive networks on textiles for biopotential monitoring applications. Sens Actuators, A 206:35–41. https://doi.org/10.1016/j.sna.2013.11.026CrossRef

253.

Yokus MA, Jur JS (2016) Fabric-based wearable dry electrodes for body surface biopotential recording. IEEE Trans Biomed Eng 63:423–430. https://doi.org/10.1109/TBME.2015.2462312CrossRef

254.

Paul G, Torah R, Beeby S, Tudor J (2017) A printed, dry electrode Frank configuration vest for ambulatory vectorcardiographic monitoring. Smart Mater Struct 26:025029. https://doi.org/10.1088/1361-665X/aa5436CrossRef

255.

Ankhili A, Tao X, Cochrane C et al (2018) Comparative study on conductive knitted fabric electrodes for long-term electrocardiography monitoring: silver-plated and PEDOT:PSS coated fabrics. Sensors (Basel). https://doi.org/10.3390/s18113890CrossRef

256.

Hsu P-C, Shen C-L, Chen F-L, et al (2018) A printed physiological monitoring module in e-textile. In: 2018 International Flexible Electronics Technology Conference (IFETC). pp 1–2

257.

Lidón-Roger JV, Prats-Boluda G, Ye-Lin Y et al (2018) Textile concentric ring electrodes for ECG recording based on screen-printing technology. Sensors 18:300. https://doi.org/10.3390/s18010300CrossRef

258.

Paiva A, Vieira D, Cunha J et al (2019) Design of a Smart Garment for Cycling. In: Machado J, Soares F, Veiga G (eds) Innovation, Engineering and Entrepreneurship. Springer International Publishing, Cham, pp 229–235CrossRef

259.

Seoane F, Soroudi A, Lu K et al (2019) Textile-friendly interconnection between wearable measurement instrumentation and sensorized garments—initial performance evaluation for electrocardiogram recordings. Sensors 19:4426. https://doi.org/10.3390/s19204426CrossRef

260.

Xu X, Luo M, He P, Yang J (2020) Washable and flexible screen printed graphene electrode on textiles for wearable healthcare monitoring. J Phys D: Appl Phys 53:125402. https://doi.org/10.1088/1361-6463/ab5f4aCrossRef

261.

Pani D, Achilli A, Bassareo PP, et al (2016) Fully-textile polymer-based ECG electrodes: Overcoming the limits of metal-based textiles. In: 2016 Computing in Cardiology Conference (CinC). pp 373–376

262.

Bihar E, Roberts T, Ismailova E et al (2017) Fully printed electrodes on stretchable textiles for long-term electrophysiology. Adv Mater Technol 2:1600251. https://doi.org/10.1002/admt.201600251CrossRef

263.

Wei Y, Wu Y, Tudor J (2017) A real-time wearable emotion detection headband based on EEG measurement. Sens Actuators, A 263:614–621. https://doi.org/10.1016/j.sna.2017.07.012CrossRef

264.

Matiko JW, Wei Y, Torah R et al (2015) Wearable EEG headband using printed electrodes and powered by energy harvesting for emotion monitoring in ambient assisted living. Smart Mater Struct 24:125028. https://doi.org/10.1088/0964-1726/24/12/125028CrossRef

265.

Ahmed A, Hossain MM, Adak B, Mukhopadhyay S (2020) Recent advances in 2D MXene integrated smart-textile interfaces for multifunctional applications. Chem Mater. https://doi.org/10.1021/acs.chemmater.0c03392CrossRef

266.

Souri H, Banerjee H, Jusufi A et al (2020) Wearable and stretchable strain sensors: materials, sensing mechanisms, and applications. Adv Intell Syst 2:2000039. https://doi.org/10.1002/aisy.202000039CrossRef

267.

Amjadi M, Kyung K-U, Park I, Sitti M (2016) Stretchable, skin-mountable, and wearable strain sensors and their potential applications: a review. Adv Func Mater 26:1678–1698. https://doi.org/10.1002/adfm.201504755CrossRef

268.

Cullinan MA, Panas RM, DiBiasio CM, Culpepper ML (2012) Scaling electromechanical sensors down to the nanoscale. Sens Actuators, A 187:162–173. https://doi.org/10.1016/j.sna.2012.08.035CrossRef

269.

Li R, Zhou Q, Bi Y et al (2020) Research progress of flexible capacitive pressure sensor for sensitivity enhancement approaches. Sens Actuators, A. https://doi.org/10.1016/j.sna.2020.112425CrossRef

270.

Stern S (2006) Electrocardiogram: still the cardiologist’s best friend. Circulation. https://doi.org/10.1161/CIRCULATIONAHA.106.623934CrossRef

271.

Yang G-Z (2014) Body sensor networks, 2nd edn. Springer, LondonCrossRef

272.

Sornmo L, Laguna P (2005) Bioelectrical signal processing in cardiac and neurological applications. Elsevier/Academic Press, Boston, Mass

273.

Zarzoso V (2009) Extraction of ECG Characteristics Using Source Separation Techniques: Exploiting Statistical Independence and Beyond. In: Naït-Ali A (ed) Advanced Biosignal Processing. Springer, Berlin, Heidelberg, pp 15–47CrossRef

274.

Palaniswami M (2016) Healthcare Sensor Networks: Challenges Toward Practical Implementation. CRC Press, Florida

275.

Pani D, Achilli A, Bonfiglio A (2018) Survey on textile electrode technologies for electrocardiographic (ECG) monitoring, from metal wires to polymers. Adv Mater Technol 3:1800008. https://doi.org/10.1002/admt.201800008CrossRef

276.

Searle A, Kirkup L (2000) A direct comparison of wet, dry and insulating bioelectric recording electrodes. Physiol Meas 21:271–283. https://doi.org/10.1088/0967-3334/21/2/307CrossRef

277.

Webster JG, Clark JW (2010) Medical instrumentation: application and design, 4th edn. John Wiley & Sons, Hoboken, NJ

278.

Crawford J, Doherty L (2012) Practical aspects of ECG recording. M & K Pub., Keswick

279.

Cavalcanti Garcia MA, Vieira TMM (2011) Surface electromyography: Why, when and how to use it. Rev Andal Med Deporte 4:17–28

280.

Moritani T, Stegeman D, Merletti R (2005) Basic Physiology and Biophysics of EMG Signal Generation. In: Merletti R, Parker P (eds) Electromyography. John Wiley & Sons Inc, Hoboken, NJ, USA, pp 1–25

281.

Farina D, Lorrain T, Negro F, Jiang N (2010) High-density EMG E-Textile systems for the control of active prostheses. In: 2010 Annual International Conference of the IEEE Engineering in Medicine and Biology. IEEE, Buenos Aires, pp 3591–3593

282.

Castellini C, van der Smagt P (2009) Surface EMG in advanced hand prosthetics. Biol Cybern 100:35–47. https://doi.org/10.1007/s00422-008-0278-1CrossRef

283.

G Li Y Geng D Tao P Zhou (2011) Performance of electromyography recorded using textile electrodes in classifying arm movements Conference proceedings : Annual International Conference of the IEEE Engineering in Medicine and Biology Society IEEE Engineering in Medicine and Biology Society Conference 2011 4243 4246 https://doi.org/10.1109/IEMBS.2011.6091053

284.

Guo J, Yu S, Li Y, et al (2018) A soft robotic exo-sheath using fabric EMG sensing for hand rehabilitation and assistance. In: 2018 IEEE International Conference on Soft Robotics (RoboSoft). pp 497–503

285.

Turker H, Sze H (2013) Surface electromyography in sports and exercise. In: Turker DrH (ed) Electrodiagnosis in New Frontiers of Clinical Research. InTech

286.

Al-Mulla MR, Sepulveda F, Colley M (2011) A review of non-invasive techniques to detect and predict localised muscle fatigue. Sensors 11:3545–3594. https://doi.org/10.3390/s110403545CrossRef

287.

Sumner B, Mancuso C, Paradiso R (2013) Performances evaluation of textile electrodes for EMG remote measurements. In: 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). IEEE, Osaka, pp 6510–6513

288.

Niijima A, Isezaki T, Aoki R, et al (2017) hitoeCap: wearable EMG sensor for monitoring masticatory muscles with PEDOT-PSS textile electrodes. pp 215–220

289.

Pino EJ, Arias Y, Aqueveque P (2018) Wearable EMG Shirt for Upper Limb Training. 2018 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). IEEE, Honolulu, HI, pp 4406–4409CrossRef

290.

Hua H, Tang W, Xu X et al (2019) Flexible multi-layer semi-dry electrode for scalp eeg measurements at hairy sites. Micromachines 10:518. https://doi.org/10.3390/mi10080518CrossRef

291.

Khalaf A, Sejdic E, Akcakaya M (2019) EEG-fTCD hybrid brain–computer interface using template matching and wavelet decomposition. J Neural Eng 16:036014. https://doi.org/10.1088/1741-2552/ab0b7fCrossRef

292.

Sun Y, Lo FPW, Lo B (2019) EEG-based user identification system using 1D-convolutional long short-term memory neural networks. Expert Syst Appl. https://doi.org/10.1016/j.eswa.2019.01.080CrossRef

293.

Radhakrishnan JK, Nithila S, Kartik SN et al (2018) a novel, needle-array dry-electrode with stainless steel micro-tips, for electroencephalography monitoring. J Med Devices 12:041001. https://doi.org/10.1115/1.4041227CrossRef

294.

Guger C, Edlinger G, Harkam W et al (2003) How many people are able to operate an eeg-based brain-computer interface (bci)? IEEE Trans Neural Syst Rehabil Eng 11:145–147. https://doi.org/10.1109/TNSRE.2003.814481CrossRef

295.

Senhadji L, Ansari-Asl K, Wendling F (2009) From EEG Signals to Brain Connectivity: Methods and Applications in Epilepsy. In: Naït-Ali A (ed) Advanced Biosignal Processing. Springer, Berlin, Heidelberg, pp 145–164CrossRef

296.

Kim J, Campbell AS, de Ávila BE-F, Wang J (2019) Wearable biosensors for healthcare monitoring. Nat Biotechnol 37:389–406. https://doi.org/10.1038/s41587-019-0045-yCrossRef

297.

(2020) Skin in the diagnostics game: wearable biosensor nano- and microsystems for medical diagnostics. Nano Today 30: 100828. https://doi.org/10.1016/j.nantod.2019.100828

298.

Santos JL, Farahi F (2015) Handbook of optical sensors. CRC Press, Boca Raton London New York

299.

Janata J (2009) Principles of chemical sensors, 2nd edn. Springer, Dordrecht, New YorkCrossRef

300.

Luo X, Yu H, Cui Y (2018) A wearable amperometric biosensor on a cotton fabric for lactate. IEEE Electron Device Lett 39:123–126. https://doi.org/10.1109/LED.2017.2777474CrossRef

301.

Matzeu G, Mogas-Soldevila L, Li W et al (2020) Large-scale patterning of reactive surfaces for wearable and environmentally deployable sensors. Adv Mater. https://doi.org/10.1002/adma.202001258CrossRef

302.

Mena-Bravo A, Luque de Castro MD (2014) Sweat: a sample with limited present applications and promising future in metabolomics. J Pharm Biomed Anal 90:139–147. https://doi.org/10.1016/j.jpba.2013.10.048CrossRef

303.

Bandodkar AJ, Wang J (2014) Non-invasive wearable electrochemical sensors: a review. Trends Biotechnol 32:363–371. https://doi.org/10.1016/j.tibtech.2014.04.005CrossRef

304.

Jadoon S, Karim S, Akram MR et al (2015) Recent developments in sweat analysis and its applications. Int J Anal Chem 2015:1–7. https://doi.org/10.1155/2015/164974CrossRef

305.

Zhou Y, Han H, Naw HPP et al (2016) Real-time colorimetric hydration sensor for sport activities. Mater Des 90:1181–1185. https://doi.org/10.1016/j.matdes.2015.06.078CrossRef

306.

Toh HS, Batchelor-McAuley C, Tschulik K, Compton RG (2013) Electrochemical detection of chloride levels in sweat using silver nanoparticles: a basis for the preliminary screening for cystic fibrosis. Analyst 138:4292. https://doi.org/10.1039/c3an00843fCrossRef

307.

Wujcik EK, Blasdel NJ, Trowbridge D, Monty CN (2013) Ion sensor for the quantification of sodium in sweat samples. IEEE Sensors J 13:3430–3436. https://doi.org/10.1109/JSEN.2013.2257168CrossRef

308.

Coyle S, Morris D, Lau K-T, et al (2009) Textile sensors to measure sweat pH and sweat-rate during exercise. In: 2009 3rd International Conference on Pervasive Computing Technologies for Healthcare. pp 1–6

309.

Promphet N, Rattanawaleedirojn P, Siralertmukul K et al (2019) Non-invasive textile based colorimetric sensor for the simultaneous detection of sweat pH and lactate. Talanta 192:424–430. https://doi.org/10.1016/j.talanta.2018.09.086CrossRef

310.

Parrilla M, Cánovas R, Jeerapan I et al (2016) A textile-based stretchable multi-ion potentiometric sensor. Adv Healthcare Mater 5:996–1001. https://doi.org/10.1002/adhm.201600092CrossRef

311.

Venkatraman PD, Velusamy V, Kharel R, Collins S (2016) Smart wearable biosensor for non-invasive real time detection of sweat lactate using compression garments. Textile Institute

312.

Merilampi S, Han He, Sydänheimo L, et al (2016) The possibilities of passive UHF RFID textile tags as comfortable wearable sweat rate sensors. In: 2016 Progress in Electromagnetic Research Symposium (PIERS). pp 3984–3987

313.

Kinnamon DS, Krishnan S, Brosler S et al (2018) Screen printed graphene oxide textile biosensor for applications in inexpensive and wearable point-of-exposure detection of influenza for at-risk populations. J Electrochem Soc 165:B3084. https://doi.org/10.1149/2.0131808jesCrossRef

314.

Manjakkal L, Dang W, Yogeswaran N, Dahiya R (2019) Textile-based potentiometric electrochemical pH sensor for wearable applications. Biosensors 9:14. https://doi.org/10.3390/bios9010014CrossRef

315.

Yang Y-L, Chuang M-C, Lou S-L, Wang J (2010) Thick-film textile-based amperometric sensors and biosensors. Analyst 135:1230. https://doi.org/10.1039/b926339jCrossRef

316.

Li Q, Zhang L, Tao X, Ding X (2017) Review of flexible temperature sensing networks for wearable physiological monitoring. Adv Healthcare Mater 6:1601371. https://doi.org/10.1002/adhm.201601371CrossRef

317.

Fuketa H, Hamamatsu M, Yokota T et al (2015) Energy-autonomous fever alarm armband integrating fully flexible solar cells, piezoelectric speaker, temperature detector, and 12V organic complementary FET circuits. 2015 IEEE International Solid-State Circuits Conference - (ISSCC) Digest of Technical Papers. IEEE, San Francisco, CA, USA, pp 1–3

318.

Hagberg K, Brånemark R (2001) Consequences of non-vascular trans-femoral amputation: a survey of quality of life, prosthetic use and problems. Prosthet Orthot Int 25:186–194. https://doi.org/10.1080/03093640108726601CrossRef

319.

Wade AJ, Broadhead MW, Cady EB et al (2000) Influence of muscle temperature during fatiguing work with the first dorsal interosseous muscle in man: a 31 P-NMR spectroscopy study. Eur J Appl Physiol 81:203–209. https://doi.org/10.1007/s004210050031CrossRef

320.

Smith CJ, Havenith G (2012) Body mapping of sweating patterns in athletes: a sex comparison. Med Sci Sports Exerc 44:2350–2361. https://doi.org/10.1249/MSS.0b013e318267b0c4CrossRef

321.

Trung TQ, Lee N-E (2017) Recent progress on stretchable electronic devices with intrinsically stretchable components. Adv Mater 29:1603167. https://doi.org/10.1002/adma.201603167CrossRef

322.

Trung TQ, Lee N-E (2017) Materials and devices for transparent stretchable electronics. J Mater Chem C 5:2202–2222. https://doi.org/10.1039/C6TC05346GCrossRef

323.

Nakagami G, Sanada H, Iizaka S et al (2010) Predicting delayed pressure ulcer healing using thermography: a prospective cohort study. J Wound Care 19(11):465–472CrossRef

324.

Martín-Vaquero J, Hernández Encinas A, Queiruga-Dios A et al (2019) Review on wearables to monitor foot temperature in diabetic patients. Sensors (Basel). https://doi.org/10.3390/s19040776CrossRef

325.

Khan S, Ali S, Bermak A (2019) Recent developments in printing flexible and wearable sensing electronics for healthcare applications. Sensors 19:1230. https://doi.org/10.3390/s19051230CrossRef

326.

Salazar-López E, Domínguez E, Ramos VJ et al (2015) The mental and subjective skin: emotion, empathy, feelings and thermography. Conscious Cogn: Int J 34:149–162. https://doi.org/10.1016/j.concog.2015.04.003CrossRef

327.

Khan S, Nguyen TP, Thiery L et al (2017) Aerosol jet printing of miniaturized. Low Power Flex Micro-Hotplates Proc 1:316. https://doi.org/10.3390/proceedings1040316CrossRef

328.

Chen W, Dols S, Oetomo SB, Feijs L (2010) Monitoring body temperature of newborn infants at neonatal intensive care units using wearable sensors. In: Proceedings of the Fifth International Conference on Body Area Networks - BodyNets ’10. ACM Press, Corfu, Greece, p 188

329.

Wang Y, Ashktorab M, Chang H-I et al (2017) Wearable Motion Sensing Devices and Algorithms for Precise Healthcare Diagnostics and Guidance. In: Rehg JM, Murphy SA, Kumar S (eds) Mobile Health: Sensors, Analytic Methods, and Applications. Springer International Publishing, Cham, pp 203–218CrossRef

330.

Dobkin BH, Dorsch A (2011) The promise of mhealth: daily activity monitoring and outcome assessments by wearable sensors. Neurorehabil Neural Repair 25:788–798. https://doi.org/10.1177/1545968311425908CrossRef

331.

Takacs J, Pollock C, Guenther J et al (2013) Validation of the Fitbit One activity monitor device during treadmill walking. J sci med sport / Sports Med Austr. https://doi.org/10.1016/j.jsams.2013.10.241CrossRef

332.

Guo F, Li Y, Kankanhalli MS, Brown MS (2013) An evaluation of wearable activity monitoring devices. In: Proceedings of the 1st ACM international workshop on Personal data meets distributed multimedia - PDM ’13. ACM Press, Barcelona, Spain, pp 31–34

333.

Fulk GD, Combs SA, Danks KA et al (2014) Accuracy of 2 activity monitors in detecting steps in people with stroke and traumatic brain injury. Phys Ther 94:222–229. https://doi.org/10.2522/ptj.20120525CrossRef

334.

Chung P-C, Hsu Y-L, Wang C-Y et al (2012) Gait analysis for patients with Alzheimer’S disease using a triaxial accelerometer. 2012 IEEE International Symposium on Circuits and Systems. IEEE, Seoul, Korea (South), pp 1323–1326CrossRef

335.

Zampieri C, Salarian A, Carlson-Kuhta P et al (2011) Assessing mobility at home in people with early Parkinson’s disease using an instrumented timed up and go test. Parkinsonism Relat Disord 17:277–280. https://doi.org/10.1016/j.parkreldis.2010.08.001CrossRef

336.

Morillo DS, Ojeda JLR, Foix LFC, Jimenez AL (2010) An accelerometer-based device for sleep apnea screening. IEEE Trans Inform Technol Biomed 14:491–499. https://doi.org/10.1109/TITB.2009.2027231CrossRef

337.

Geoff Appelboom BTB (2014) Motion sensors to assess and monitor medical and surgical management of parkinson’s disease. Int J Phys Med Rehabil. https://doi.org/10.4172/2329-9096.1000221CrossRef

338.

Homayounfar SZ, Andrew TL (2020) Wearable sensors for monitoring human motion: a review on mechanisms, materials, and challenges. SLAS Technol: Trans Life Sci Innov 25:9–24. https://doi.org/10.1177/2472630319891128CrossRef

339.

Lu T-H, Lin H-C, Chen R-R, Chen Y-L (2013) Motion-sensing based management system for smart context-awareness rehabilitation healthcare. https://doi.org/10.4236/ait.2013.32A001

340.

Wei Y, Torah R, Yang K et al (2013) Screen printing of a capacitive cantilever-based motion sensor on fabric using a novel sacrificial layer process for smart fabric applications. Meas Sci Technol 24:075104. https://doi.org/10.1088/0957-0233/24/7/075104CrossRef

341.

Wei Y, Torah R, Yang K et al (2013) A screen printable sacrificial fabrication process to realise a cantilever on fabric using a piezoelectric layer to detect motion for wearable applications. Sens Actuators, A 203:241–248. https://doi.org/10.1016/j.sna.2013.08.041CrossRef

342.

Åkerfeldt M, Lund A, Walkenström P (2015) Textile sensing glove with piezoelectric PVDF fibers and printed electrodes of PEDOT:PSS. Text Res J 85:1789–1799. https://doi.org/10.1177/0040517515578333CrossRef

343.

Yang K, Meadmore K, Freeman C et al (2018) Development of user-friendly wearable electronic textiles for healthcare applications. Sensors 18:2410. https://doi.org/10.3390/s18082410CrossRef

344.

McLaren R, Joseph F, Baguley C, Taylor D (2016) A review of e-textiles in neurological rehabilitation: How close are we? J NeuroEng Rehabil 13:59. https://doi.org/10.1186/s12984-016-0167-0CrossRef

345.

Yang K, Freeman C, Torah R et al (2014) Screen printed fabric electrode array for wearable functional electrical stimulation. Sens Actuators, A 213:108–115. https://doi.org/10.1016/j.sna.2014.03.025CrossRef

346.

Hunter L, Fan J, Chau D (2009) 5 - Fabric and garment drape. In: Fan J, Hunter L (eds) Engineering Apparel Fabrics and Garments. Woodhead Publishing, Netherlands, pp 102–130CrossRef

347.

Wang J, Lu C, Zhang K (2020) Textile-based strain sensor for human motion detection. Energy Environ Mater 3:80–100. https://doi.org/10.1002/eem2.12041CrossRef

348.

Coyle S, Lau K, Moyna N et al (2010) BIOTEX—biosensing textiles for personalised healthcare management. IEEE Trans Inf Technol Biomed 14:364–370. https://doi.org/10.1109/TITB.2009.2038484CrossRef

349.

Lisak G, Arnebrant T, Ruzgas T, Bobacka J (2015) Textile-based sampling for potentiometric determination of ions. Anal Chim Acta 877:71–79. https://doi.org/10.1016/j.aca.2015.03.045CrossRef

350.

He T, Wang H, Wang J et al (2019) Self-sustainable wearable textile nano-energy nano-system (NENS) for next-generation healthcare applications. Adv Sci 6:1901437. https://doi.org/10.1002/advs.201901437CrossRef

351.

Huang S, Liu Y, Zhao Y et al (2019) Flexible electronics: stretchable electrodes and their future. Adv Func Mater 29:1805924. https://doi.org/10.1002/adfm.201805924CrossRef

352.

Ahmed A, Jalil MA, Hossain MM et al (2020) A PEDOT:PSS and graphene-clad smart textile-based wearable electronic Joule heater with high thermal stability. J Mater Chem C 8:16204–16215. https://doi.org/10.1039/D0TC03368ECrossRef

353.

Khair N, Islam R, Shahariar H (2019) Carbon-based electronic textiles: materials, fabrication processes and applications. J Mater Sci 54:10079–10101. https://doi.org/10.1007/s10853-019-03464-1CrossRef

354.

Liu L, Chen W, Zhang H et al (2019) Flexible and multifunctional silk textiles with biomimetic leaf-like MXene/silver nanowire nanostructures for electromagnetic interference shielding, humidity monitoring, and self-derived hydrophobicity. Adv Funct Mater 29:1905197. https://doi.org/10.1002/adfm.201905197CrossRef

355.

Mhetre S, Carr W, Radhakrishnaiah P (2010) On the relationship between ink-jet printing quality of pigment ink and the spreading behavior of ink drops. J Text Inst 101:423–430. https://doi.org/10.1080/00405000802449984CrossRef

356.

Chauraya A, Whittow WG, Vardaxoglou JC et al (2013) Inkjet printed dipole antennas on textiles for wearable communications. IET Microwav Antennas Propag 7:760–767. https://doi.org/10.1049/iet-map.2013.0076CrossRef

357.

Oliveira CC, Machado da Silva J, Trindade IG, Martins F (2014) Characterization of the electrode-skin impedance of textile electrodes. In: Design of Circuits and Integrated Systems. pp 1–6

358.

Lee WJ, Park JY, Nam HJ, Choa S (2018) Highly Stretchable, Durable, and Printable Textile Conductor. In: 2018 IEEE 20th Electronics Packaging Technology Conference (EPTC). pp 789–792

359.

Lee WJ, Park JY, Nam HJ, Choa S-H (2019) The development of a highly stretchable, durable, and printable textile electrode. Text Res J 89:4104–4113. https://doi.org/10.1177/0040517519828992CrossRef

360.

Menni C, Valdes AM, Freidin MB et al (2020) Real-time tracking of self-reported symptoms to predict potential COVID-19. Nat Med 26:1037–1040. https://doi.org/10.1038/s41591-020-0916-2CrossRef

361.

Demeke Teklemariam A, Samaddar M, Alharbi MG et al (2020) Biosensor and molecular-based methods for the detection of human coronaviruses: a review. Mol Cell Probes 54:101662. https://doi.org/10.1016/j.mcp.2020.101662CrossRef

362.

Roudjane M, Bellemare-Rousseau S, Drouin E et al (2020) Smart T-shirt based on wireless communication spiral fiber sensor array for real-time breath monitoring: validation of the technology. IEEE Sens J 20:10841–10850. https://doi.org/10.1109/JSEN.2020.2993286CrossRef

363.

Roy K, Ghosh SK, Sultana A et al (2019) A self-powered wearable pressure sensor and pyroelectric breathing sensor based on GO interfaced PVDF nanofibers. ACS Appl Nano Mater 2:2013–2025. https://doi.org/10.1021/acsanm.9b00033CrossRef

Springer Professional

Nanomaterials-patterned flexible electrodes for wearable health monitoring: a review

Abstract

Graphical Abstract

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partner

Marktübersichten

Springer Professional

Abstract

Graphical Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 27/2021

Magnetic and compressive properties of ternary Ni–Fe–Ti eutectic alloy processed by electromagnetic levitation technique

A review on the direct electroplating of polymeric materials

Dependence of the magnetoelectric coupling on elastic and dielectric properties of two-phase multiferroic composites

High-resolution imaging of depth filter structures using X-ray computed tomography

Zinc oxide nanorods-based immuno-field-effect transistor for human serum albumin detection

Process time variation and critical growth onset analysis for nanofoam formation in sucrose-based hydrothermal carbonization

Premium Partner

Marktübersichten