nach oben

Arabian Journal for Science and Engineering

Erschienen in:

28.09.2019 | Research Article - Computer Engineering and Computer Science

Nature-Inspired Optimization Algorithm-Tuned Feed-Forward and Recurrent Neural Networks Using CFD-Based Phenomenological Model-Generated Data to Model the EBW Process

verfasst von: Debasish Das, Abhishek Rudra Pal, Amit Kumar Das, Dilip Kumar Pratihar, Gour Gopal Roy

Erschienen in: Arabian Journal for Science and Engineering | Ausgabe 4/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

To automate the electron beam welding process, the identification of its contributing parameters is a must, for which it is required to establish the input–output correlations in both forward and reverse directions as accurately as possible. In the present investigation, both feed-forward and recurrent neural networks are developed for the said purposes, which have been trained using the welding data collected from an existing computational fluid dynamics (CFD)-based phenomenological model with the help of some natured-inspired optimization tools like cuckoo search, firefly, flower pollination, crow search algorithms, particle swarm optimization, covariance adaptation evolution strategy and spider monkey optimization, separately. The results of the trained networks have been validated using some real experimental data. The novelty of this study lies with the applications of these newly developed nature-inspired optimization algorithms to tune the neural networks using the CFD-based phenomenological model-generated welding data. In addition, the performances of these neural networks tuned using the said nature-inspired optimization algorithms have been compared through some statistical tests. In general, flower pollination-tuned recurrent neural network is found to provide the best predictions.

Vorheriger Artikel TQ-Model: A New Evaluation Model for Knowledge-Based Authentication Schemes

Nächster Artikel Diagnosis of Parkinson’s Disease at an Early Stage Using Volume Rendering SPECT Image Slices

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Roy, G.G.; Zhang, Z.; Mishra, S.; He, X.; Fan, Y.; Kumar, A.; DebRoy, T.: A computer program to calculate fluid flow and heat transfer during fusion welding with free surface. Department of Materials Science and Engineering, Pennsylvania State University, University Park, Pennsylvania—16802 (2002)

Das, D.; Pratihar, D.K.; Roy, G.G.: Cooling rate predictions and its correlation with grain characteristics during electron beam welding of stainless steel. Int. J. Adv. Manuf. Technol. (2018). https://doi.org/10.1007/s00170-018-2095-6 CrossRef

Ganjigatti, J.P.; Pratihar, D.K.; Roychoudhury, A.: Modeling of the MIG welding process using statistical approaches. Int. J. Adv. Manuf. Technol. 35, 1166–1190 (2008). https://doi.org/10.1007/s00170-006-0798-6 CrossRef

Datta, S.; Pratihar, D.K.; Bandyopadhyay, P.P.: Modeling of plasma spray coating process using statistical regression analysis. Int. J. Adv. Manuf. Technol. 65, 967–980 (2013). https://doi.org/10.1007/s00170-012-4232-y CrossRef

Pratihar, D.K.: Soft Computing Fundamentals and Applications. Narosa Publishing House Pvt. Ltd, New Delhi (2015)

Dutta, P.; Pratihar, D.K.: Modeling of TIG welding process using conventional regression analysis and neural network-based approaches. J. Mater. Process. Technol. 184, 56–68 (2007). https://doi.org/10.1016/j.jmatprotec.2006.11.004 CrossRef

Parappagoudar, M.B.; Pratihar, D.K.; Datta, G.L.: Forward and reverse mappings in green sand mould system using neural networks. Appl. Soft Comput. J. 8, 239–260 (2008). https://doi.org/10.1016/j.asoc.2007.01.005 CrossRef

Malviya, R.; Pratihar, D.K.: Tuning of neural networks using particle swarm optimization to model MIG welding process. Swarm Evol. Comput. 1, 223–235 (2011). https://doi.org/10.1016/j.swevo.2011.07.001 CrossRef

Jha, M.N.; Pratihar, D.K.; Bapat, A.V.; Dey, V.; Ali, M.; Bagchi, A.C.: Knowledge-based systems using neural networks for electron beam welding process of reactive material (Zircaloy-4). J. Intell. Manuf. 25, 1315–1333 (2014). https://doi.org/10.1007/s10845-013-0732-3 CrossRef

10.

Das, A.K.; Pratihar, D.K.: Performance improvement of a genetic algorithm using a novel restart strategy with elitism principle. Int. J. Hybrid Intell. Syst. 15, 1–15 (2018). https://doi.org/10.3233/HIS-180257 CrossRef

11.

Yang, X.-S.: Firefly algorithm, levy flights and global optimization. In: Bramer, M., Ellis, R., Petridis, M. (eds.) Research and Development in Intelligent Systems XXVI, pp. 209–218. Springer, London (2010)CrossRef

12.

Yang, X.S.; Deb, S.: Cuckoo search via Levy flights. In: Abraham, A., Carvalho, A., Herrera, F., Pai, V. (eds.) Nature and Biologically Inspired Computing (NABIC), pp. 210–214. IEEE, Coimbatore, India (2009). https://doi.org/10.1109/NABIC.2009.5393690

13.

Yang, X.-S.: Flower pollination algorithm for global optimization. In: Durand-Lose, J., Jonoska, N. (eds.) Unconventional Computation and Natural Computation: 11th International Conference, UCNC 2012, pp. 240–249. Springer, Orléans (2012)

14.

Askarzadeh, A.: A novel metaheuristic method for solving constrained engineering optimization problems: crow search algorithm. Comput. Struct. 169, 1–12 (2016). https://doi.org/10.1016/j.compstruc.2016.03.001 CrossRef

15.

Bag, S.; De, A.; DebRoy, T.: A genetic algorithm-assisted inverse convective heat transfer model for tailoring weld geometry. Mater. Manuf. Process. 24, 384–397 (2009). https://doi.org/10.1080/10426910802679915 CrossRef

16.

Manvatkar, V.D.; Arora, A.; De, A.; Debroy, T.: Neural network models of peak temperature, torque, traverse force, bending stress and maximum shear stress during friction stir welding. Sci. Technol. Weld. Join. 17, 460–466 (2012). https://doi.org/10.1179/1362171812Y.0000000035 CrossRef

17.

Das, D.; Pratihar, D.K.; Roy, G.G.; Pal, A.R.A.: Phenomenological model-based study on electron beam welding process, and input–output modeling using neural networks trained by back-propagation algorithm, genetic algorithms, particle swarm optimization algorithm and bat algorithm. Appl. Intell. 48, 2698–2718 (2018). https://doi.org/10.1007/s10489-017-1101-2 CrossRef

18.

Nandan, R.; DebRoy, T.; Bhadeshia, H.K.D.H.: Recent advances in friction-stir welding—process, weldment structure and properties. Prog. Mater Sci. 53, 980–1023 (2008). https://doi.org/10.1016/j.pmatsci.2008.05.001 CrossRef

19.

He, X.; Elmer, J.W.; Debroy, T.: Heat transfer and fluid flow in laser microwelding. J. Appl. Phys. 97, 084909 (2005). https://doi.org/10.1063/1.1873032 CrossRef

20.

Roy, G.G.; Elmer, J.W.; DebRoy, T.: Mathematical modeling of heat transfer, fluid flow, and solidification during linear welding with a pulsed laser beam. J. Appl. Phys. 100, 034903 (2006). https://doi.org/10.1063/1.2214392 CrossRef

21.

Rai, R.; Roy, G.G.; Debroy, T.: A computationally efficient model of convective heat transfer and solidification characteristics during keyhole mode laser welding. J. Appl. Phys. 101, 054909 (2007). https://doi.org/10.1063/1.2537587 CrossRef

22.

Rai, R.; Elmer, J.W.; Palmer, T.A.; DebRoy, T.: Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti–6Al–4 V, 304L stainless steel and vanadium. J. Phys. D Appl. Phys. 40, 5753–5766 (2007). https://doi.org/10.1088/0022-3727/40/18/037 CrossRef

23.

Rai, R.; Palmer, T.A.; Elmer, J.W.; Debroy, T.: Heat transfer and fluid flow during electron beam welding of 304L stainless steel alloy. Weld. J. 88, 54–61 (2009)

24.

Khorram, A.; Ghoreishi, M.; Yazdi, M.R.S.; Moradi, M.: Optimization of bead geometry in CO₂ laser welding of Ti 6Al 4 V using response surface methodology. Engineering 03, 708–712 (2011). https://doi.org/10.4236/eng.2011.37084 CrossRef

25.

Srivastava, S.; Garg, R.K.: Process parameter optimization of gas metal arc welding on IS:2062 mild steel using response surface methodology. J. Manuf. Process. 25, 296–305 (2017). https://doi.org/10.1016/j.jmapro.2016.12.016 CrossRef

26.

Torres-Treviño, L.M.; Reyes-Valdes, F.A.; López, V.; Praga-Alejo, R.: Multi-objective optimization of a welding process by the estimation of the Pareto optimal set. Expert Syst. Appl. 38, 8045–8053 (2011). https://doi.org/10.1016/j.eswa.2010.12.139 CrossRef

27.

Buffa, G.; Fratini, L.; Micari, F.: Mechanical and microstructural properties prediction by artificial neural networks in FSW processes of dual phase titanium alloys. J. Manuf. Process. 14, 289–296 (2012). https://doi.org/10.1016/j.jmapro.2011.10.007 CrossRef

28.

Mathew, J.; Griffin, J.; Alamaniotis, M.; Kanarachos, S.; Fitzpatrick, M.E.: Prediction of welding residual stresses using machine learning: comparison between neural networks and neuro-fuzzy systems. Appl. Soft Comput. 70, 131–146 (2018). https://doi.org/10.1016/j.asoc.2018.05.017 CrossRef

29.

Vargas, J.A.R.; Pedrycz, W.; Hemerly, E.M.: Improved learning algorithm for two-layer neural networks for identification of nonlinear systems. Neurocomputing 329, 86–96 (2018). https://doi.org/10.1016/j.neucom.2018.10.008 CrossRef

30.

Jha, M.N.; Pratihar, D.K.; Dey, V.; Saha, T.K.; Bapat, A.V.: Study on electron beam butt welding of austenitic stainless steel 304 plates and its input–output modelling using neural networks. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 225, 2051–2070 (2011). https://doi.org/10.1177/0954405411404856 CrossRef

31.

Reddy, D.Y.A.; Pratihar, D.K.: Neural network-based expert systems for predictions of temperature distributions in electron beam welding process. Int. J. Adv. Manuf. Technol. 55, 535–548 (2011). https://doi.org/10.1007/s00170-010-3104-6 CrossRef

32.

Gao, X.D.; Zhang, Y.X.: Prediction model of weld width during high-power disk laser welding of 304 austenitic stainless steel. Int. J. Precis. Eng. Manuf. 15, 399–405 (2014). https://doi.org/10.1007/s12541-014-0350-9 CrossRef

33.

Ruiz, L.G.B.; Rueda, R.; Cuéllar, M.P.; Pegalajar, M.C.: Energy consumption forecasting based on Elman neural networks with evolutive optimization. Expert Syst. Appl. 92, 380–389 (2018). https://doi.org/10.1016/j.eswa.2017.09.059 CrossRef

34.

Ge, H.W.; Liang, Y.C.; Marchese, M.: A modified particle swarm optimization-based dynamic recurrent neural network for identifying and controlling nonlinear systems. Comput. Struct. 85, 1611–1622 (2007). https://doi.org/10.1016/j.compstruc.2007.03.001 CrossRef

35.

Zhou, C.; Ding, L.Y.; He, R.: PSO-based Elman neural network model for predictive control of air chamber pressure in slurry shield tunneling under Yangtze River. Autom. Constr. 36, 208–217 (2013). https://doi.org/10.1016/j.autcon.2013.03.001 CrossRef

36.

Nawi, N.M.; Khan, A.; Rehman, M.Z.; Herawan, T.; Deris, M.M.: CSLMEN: a new cuckoo search Levenberg Marquardt Elman network for data classification. In: Recent Advances on Soft Computing and Data Mining, pp. 173–182. Springer, Kluang (2014)

37.

Guo, C.; Yan, J.; Tian, Z.: Analysis and design of an attitude calculation algorithm based on elman neural network for SINS. Clust. Comput. 8, 1–6 (2018). https://doi.org/10.1007/s10586-018-2562-8 CrossRef

38.

Mehrgini, B.; Izadi, H.; Memarian, H.: Shear wave velocity prediction using Elman artificial neural network. Carbonates Evaporites (2017). https://doi.org/10.1007/s13146-017-0406-x CrossRef

39.

Nayak, J.; Naik, B.; Behera, H.S.; Abraham, A.: Elitist teaching–learning-based optimization (ETLBO) with higher-order Jordan Pi-sigma neural network: a comparative performance analysis. Neural Comput. Appl. 30, 1445–1468 (2018). https://doi.org/10.1007/s00521-016-2738-1 CrossRef

40.

Rather, A.M.; Agarwal, A.; Sastry, V.N.: Recurrent neural network and a hybrid model for prediction of stock returns. Expert Syst. Appl. 42, 3234–3241 (2015). https://doi.org/10.1016/j.eswa.2014.12.003 CrossRef

41.

Krichene, E.; Masmoudi, Y.; Alimi, A.M.; Abraham, A.; Chabchoub, H.: Forecasting using Elman recurrent neural network. In: International Conference on Intelligent Systems Design and Applications, pp. 488–497. Springer, Cham (2016)

42.

Valian, E.; Mohanna, S.; Tavakoli, S.: Improved cuckoo search algorithm for feedforward neural network training. Artif. Intell. 2, 36–43 (2011). https://doi.org/10.5121/ijaia.2011.2304 CrossRef

43.

Vazquez, R.A.: Training spiking neural models using cuckoo search algorithm. In: Evolutionary Computation (CEC), pp. 679–686. IEEE Congress (2011)

44.

Swain, K.B.; Solanki, S.S.; Mahakula, A.K.: Bio inspired cuckoo search algorithm based neural network and its application to noise cancellation. In: Signal Processing and Integrated Networks (SPIN), pp. 632–635. IEEE (2014)

45.

Gotmare, A.; Patidar, R.; George, N.V.: Nonlinear system identification using a cuckoo search optimized adaptive Hammerstein model. Expert Syst. Appl. 42, 2538–2546 (2015). https://doi.org/10.1016/j.eswa.2014.10.040 CrossRef

46.

Goswami, D.; Chakraborty, S.: Optimal process parameter selection in laser transmission welding by cuckoo search algorithm. In: Proceedings of the International Conference on Advanced Engineering Optimization Through Intelligent Techniques (AEOTIT), Gujarat, India, pp. 40–44 (2013)

47.

Chen, G.; Ding, X.: Optimal economic dispatch with valve loading effect using self-adaptive firefly algorithm. Appl. Intell. 42, 276–288 (2015). https://doi.org/10.1007/s10489-014-0593-2 CrossRef

48.

Alweshah, M.; Abdullah, S.: Hybridizing firefly algorithms with a probabilistic neural network for solving classification problems. Appl. Soft Comput. J. 35, 513–524 (2015). https://doi.org/10.1016/j.asoc.2015.06.018 CrossRef

49.

Nayak, J.; Naik, B.; Behera, H.S.: A novel nature inspired firefly algorithm with higher order neural network: performance analysis. Eng. Sci. Technol. Int. J. 19, 197–211 (2016). https://doi.org/10.1016/j.jestch.2015.07.005 CrossRef

50.

Senthilkumar, N.; Tamizharasan, T.; Gobikannan, S.: Application of response surface methodology and firefly algorithm for optimizing multiple responses in turning AISI 1045 steel. Arab. J. Sci. Eng. 39, 8015–8030 (2014). https://doi.org/10.1007/s13369-014-1320-3 CrossRef

51.

Chiroma, H.; Khan, A.; Abubakar, A.I.; Saadi, Y.; Hamza, M.F.; Shuib, L.; Gital, A.Y.; Herawan, T.: A new approach for forecasting OPEC petroleum consumption based on neural network train by using flower pollination algorithm. Appl. Soft Comput. J. 48, 50–58 (2016). https://doi.org/10.1016/j.asoc.2016.06.038 CrossRef

52.

Acherjee, B.; Maity, D.; Kuar, A.S.: Parameters optimisation of transmission laser welding of dissimilar plastics using RSM and flower pollination algorithm integrated approach. Int. J. Math. Model. Numer. Optim. 8, 1–22 (2017). https://doi.org/10.1504/IJMMNO.2017.10004515 CrossRef

53.

Draa, A.: On the performances of the flower pollination algorithm—qualitative and quantitative analyses. Appl. Soft Comput. J. 34, 349–371 (2015). https://doi.org/10.1016/j.asoc.2015.05.015 CrossRef

54.

Singh, D.; Singh, U.; Salgotra, R.: An extended version of flower pollination algorithm. Arab. J. Sci. Eng. 43, 7573–7603 (2018). https://doi.org/10.1007/s13369-018-3166-6 CrossRef

55.

Oliva, D.; Hinojosa, S.; Cuevas, E.; Pajares, G.; Avalos, O.; Gálvez, J.: Cross entropy based thresholding for magnetic resonance brain images using crow search algorithm. Expert Syst. Appl. 79, 164–180 (2017). https://doi.org/10.1016/j.eswa.2017.02.042 CrossRef

56.

Nobahari, H.; Bighashdel, A.: MOCSA: a multi-objective crow search algorithm for multi-objective optimization. In: 2nd Conference on Swarm Intelligence and Evolutionary Computation (CSIEC), pp. 60–65. IEEE, Kerman (2017)

57.

Abdelaziz, A.Y.; Fathy, A.: A novel approach based on crow search algorithm for optimal selection of conductor size in radial distribution networks. Eng. Sci. Technol. Int. J. 20, 391–402 (2017). https://doi.org/10.1016/j.jestch.2017.02.004 CrossRef

58.

Mason, K.; Duggan, M.; Barrett, E.; Duggan, J.; Howley, E.: Predicting host CPU utilization in the cloud using evolutionary neural networks. Fut. Gener. Comput. Syst. 86, 162–173 (2018). https://doi.org/10.1016/j.future.2018.03.040 CrossRef

59.

Mason, K.; Duggan, J.; Howley, E.: Forecasting energy demand, wind generation and carbon dioxide emissions in Ireland using evolutionary neural networks. Energy 155, 705–720 (2018). https://doi.org/10.1016/j.energy.2018.04.192 CrossRef

60.

Cuevas, E.; Galvez, J.: An optimization algorithm guided by a machine learning approach. Int. J. Mach. Learn. Cybern. (2019). https://doi.org/10.1007/s13042-018-00915-0 CrossRef

61.

Veloso De Melo, V.; Iacca, G.: A CMA-ES-based 2-stage memetic framework for solving constrained optimization problems. In: IEEE SSCI 2014–2014 IEEE Symposium Series on Computational Intelligence—FOCI 2014 2014 IEEE Symposium on Foundations of Computational Intelligence Proceedings, pp. 143–150 (2015). https://doi.org/10.1109/FOCI.2014.7007819

62.

Jadon, S.S.; Tiwari, R.; Sharma, H.; Bansal, J.C.: Hybrid artificial bee colony algorithm with differential evolution. Appl. Soft Comput. J. 58, 11–24 (2017). https://doi.org/10.1016/j.asoc.2017.04.018 CrossRef

63.

Kusakci, A.O.; Can, M.: A novel evolution strategy for constrained optimization in engineering design. In: 2013 24th International Conference on Information, Communication and Automation Technologies. ICAT 2013, pp. 1–6 (2013). https://doi.org/10.1109/icat.2013.6684072

64.

Elmer, J.W.; Giedt, W.H.; Eager, T.W.: The transition from shallow to deep penetration during electron beam welding. Weld. J. 69, 167–176 (1990)

65.

Kar, J.; Mahanty, S.; Roy, S.K.; Roy, G.G.: Estimation of average spot diameter and bead penetration using process model during electron beam welding of AISI 304 stainless steel. Trans. Indian Inst. Met. 68, 935–941 (2015). https://doi.org/10.1007/s12666-015-0529-5 CrossRef

66.

Bansal, J.C.; Sharma, H.; Jadon, S.S.; Clerc, M.: Spider monkey optimization algorithm for numerical optimization. Memet. Comput. 6, 31–47 (2014). https://doi.org/10.1007/s12293-013-0128-0 CrossRef

67.

Petrov, P.: Optimization of carbon steel electron-beam hardening. J. Phys. Conf. Ser. 223, 012029 (2010). https://doi.org/10.1088/1742-6596/223/1/012029 CrossRef

68.

Das, D.; Pratihar, D.K.; Roy, G.G.: Electron beam melting of steel plates: temperature measurement using thermocouples and prediction through finite element analysis. In: Mandal, D.K., Syan, C.S. (eds.) CAD/CAM, Robotics and Factories of the Future, pp. 579–588. Springer, New Delhi (2016)CrossRef

69.

Datta, S.; Pratihar, D.K.; Bandyopadhyay, P.P.: Modeling of input–output relationships for a plasma spray coating process using soft computing tools. Appl. Soft Comput. 12, 3356–3368 (2012). https://doi.org/10.1016/j.asoc.2012.07.015 CrossRef

70.

Yang, X.: Recent Advances in Swarm Intelligence and Evolutionary Computation, vol. 585. Springer, London (2015)

71.

Yang, X.S.; Deb, S.: Cuckoo search: recent advances and applications. Neural Comput. Appl. 24, 169–174 (2014). https://doi.org/10.1007/s00521-013-1367-1 CrossRef

72.

Yang, X.S.: Multiobjective firefly algorithm for continuous optimization. Eng. Comput. 29, 175–184 (2013). https://doi.org/10.1007/s00366-012-0254-1 CrossRef

73.

Gupta, K.; Deep, K.; Bansal, J.C.: Spider monkey optimization algorithm for constrained optimization problems. Soft. Comput. 21, 6933–6962 (2017). https://doi.org/10.1007/s00500-016-2419-0 CrossRef

74.

Sharma, H.; Hazrati, G.; Bansal, J.C.: Spider monkey optimization algorithm. In: Bansal, J.C., Singh, P.K., Pal, N.R. (eds.) Evolutionary and Swarm Intelligence Algorithms, pp. 43–59. Springer International Publishing, Cham (2019)CrossRef

75.

Derrac, J.; García, S.; Molina, D.; Herrera, F.: A practical tutorial on the use of nonparametric statistical tests as a methodology for comparing evolutionary and swarm intelligence algorithms. Swarm Evol. Comput. 1, 3–18 (2011). https://doi.org/10.1016/j.swevo.2011.02.002 CrossRef

76.

Chakri, A.; Khelif, R.; Benouaret, M.; Yang, X.S.: New directional bat algorithm for continuous optimization problems. Expert Syst. Appl. 69, 159–175 (2017). https://doi.org/10.1016/j.eswa.2016.10.050 CrossRef

77.

Al-Azza, A.A.; Al-Jodah, A.A.; Harackiewicz, F.J.: Spider monkey optimization: a novel technique for antenna optimization. IEEE Antennas Wirel. Propag. Lett. 15, 1016–1019 (2016). https://doi.org/10.1109/LAWP.2015.2490103 CrossRef

Titel: Nature-Inspired Optimization Algorithm-Tuned Feed-Forward and Recurrent Neural Networks Using CFD-Based Phenomenological Model-Generated Data to Model the EBW Process
verfasst von: Debasish Das
Abhishek Rudra Pal
Amit Kumar Das
Dilip Kumar Pratihar
Gour Gopal Roy
Publikationsdatum: 28.09.2019
Verlag: Springer Berlin Heidelberg
Erschienen in: Arabian Journal for Science and Engineering / Ausgabe 4/2020
Print ISSN: 2193-567X
Elektronische ISSN: 2191-4281
DOI: https://doi.org/10.1007/s13369-019-04142-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2020

Reduced Reference Image Quality Assessment Technique Based on DWT and Path Integral Local Binary Patterns

EX-MAN Component Model for Component-Based Software Construction

An Efficient Filter-Based Feature Selection Model to Identify Significant Features from High-Dimensional Microarray Data

A Hybrid-Based Verifiable Secret Sharing Scheme Using Chinese Remainder Theorem

An Integrated Word Embedding-Based Dual-Task Learning Method for Sentiment Analysis

An Adaptive Threshold-Based Attribute Selection to Classify Requests Under DDoS Attack in Cloud-Based Systems

Premium Partner

Marktübersichten