nach oben

Arabian Journal for Science and Engineering

Erschienen in:

09.10.2019 | Research Article - Petroleum Engineering

New Anti-balling Reamer Blade for Reaming in Soft and Sticky Formation Easy to Hydration and Collapsing

verfasst von: Jun Jing, Xiaohua Zhu, Liming Dai, Degui Wang

Erschienen in: Arabian Journal for Science and Engineering | Ausgabe 12/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Traditional reamer blade with double-row cutters and middle channel structure frequently encounters the cuttings deposition and balling when reaming the soft and sticky formation which is easy to hydration and collapsing. Balling causes were analyzed from the view of the cuttings’ properties and the hydraulic characteristics of the traditional reamer blade. Based on the analysis results, a new anti-balling reamer blade technology was presented to address this problem. Evaluations on the cutting force and working life of the new blade were conducted by comparison with the pilot polycrystalline diamond compact (PDC) bit. The theoretic working life of the new blade was about twice longer than that of pilot PDC bit. The hydrodynamic analysis results indicated that the disappearing of low-pressure region and turbulence combined with the lower differential pressure of the annulus fluid can significantly prevent the new reamer blade from cuttings deposition and balling.

Vorheriger Artikel Assessment of Trapping Mechanisms of CO2 Sequestration and Optimization of Key Process Parameters in a Deep Saline Aquifer Using Reservoir Simulation and Response Surface Methodology

Nächster Artikel Experimental Analysis and Numerical Modeling of Polymer Flooding in Heavy Oil Recovery Enhancement: A Pore-Level Investigation

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Gholami, R.; Elochukwu, H.; Fakhari, N.: A review on borehole instability in active shale formations: interactions, mechanisms and inhibitors. Earth Sci. Rev. 177, 2–13 (2018). https://doi.org/10.1016/j.earscirev.2017.11.002 CrossRef

Uyen, P.; Molly, C.; Gail, N.: Advanced modeling technology: optimizing bit–reamer interaction leads to performance step-change in hole enlargement while drilling. In: IADC/SPE Drilling Conference and Exhibition, New Orleans, Louisiana, USA, February 2–4 (2010)

Monali, L.; Chakshu, A.; Deepak, S.: BHA modeling and application of bi-center bit with unique vibration dampening tool to improve hole opening performance in offshore HTHP exploratory well in Krishna Godavari Basin, India. In: SPE Asia Pacific Drilling Technology Conference, Singapore, August 22–24 (2016)

Barzin, C.; Steven, R.; Robert, B.: Underreamer with real-time communications and optimal bit design achieves successful lateral well placement—a case study. In: SPE Annual Technical Conference and Exhibition, Amsterdam, The Netherlands, October 27–29 (2014)

Dewey, C.; Paez, L.; Desai, P.: Focused approach to solving deepwater reaming problems. In: IADC/SPE Drilling Conference and Exhibition, San Diego, California, USA, March 6–8 (2012)

Pacheco, L.; Desousa, J.H.D.; Thomson, I.J.; et al.: Fit-for-purpose under-reaming blades design and total system approach helped drill a challenging 18 1/8-in. x 22-in. Section 20 days ahead of AFE in deepwater exploration well offshore Brazil. In: SPE Deepwater Drilling and Completions Conference, Galveston, Texas, USA, September 10–11 (2014)

Ke, G.; Youhong, S.; Runfeng, G.: Application and prospect of bionic non-smooth theory in drilling engineering. Pet. Explor. Dev. 36(4), 519–541 (2009). https://doi.org/10.1016/s1876-3804(09)60143-9 CrossRef

XiaoHua, Z.; Jun, J.; Hua, T.: Causes and conditions for reamer blade balling during hole enlargement while drilling. Eng. Appl. Comput. Fluid Mech. 6(1), 87–99 (2012). https://doi.org/10.1080/19942060.2012.11015405 CrossRef

Matthew, S.; Bruno, C.; Danny, T.: Curved nozzle design for PDC bits enhances hydraulics for bit cleaning and cooling improvements. In: SPE/IADC Drilling Conference and Exhibition, The Hague, The Netherlands, March 14–16 (2017)

10.

Scott, A.; Carl, R.; Mark, A.: Optimized performance with new eccentric hole-enlargement tool through improved directional control, bit cleaning, and dysfunction mitigation in soft, balling, and swelling formations. In: SPE Western Regional Meeting, San Jose, California, USA, March 24–26 (2009)

11.

Ali, A.M.; Reza, R.; Ryan, G.: Hydraulic design of shale drill bit using an integrated numerical and experimental approach. In: SPE/IADC Drilling Conference and Exhibition, London, England, UK. March 17–19 (2015)

12.

Radford, S.R.; Patel, S.G.; Dee, K.C.: Durable bit coating reduces shale balling in field tests and contributes to longer runs. In: SPE/IADC Drilling Conference and Exhibition, London, England, UK. March 17–19 (2015)

13.

Yu, B.; Goodman, A.; Hayes, B.: From laboratory high-pressure, high-temperature technology to field success: a case study on new anti-balling coating development. In: SPE/IADC Drilling Conference and Exhibition, The Hague, The Netherlands, March 14–16 (2017)

14.

Octavio, A.; Faisal, M.; Hatem, G.: New erosion resistance PDC bit coating eliminates balling in water-based drilling fluids, Saudi Arabia. In: International Petroleum Technology Conference, Doha, Qatar, January 19–22 (2014)

15.

Cooper, G.A.; Roy, S.: Prevention of bit balling by electro-osmosis. In: SPE Western Regional Meeting, Long Beach, California, March 23–25 (1994)

16.

Smith, J.R.: Diagnosis of poor PDC bit performance in deep shales. Ph.D. dissertation, Louisiana State University, Baton Rouge, Louisiana, p. 347 (1998)

17.

Zhu, H.Y.; Liu, Q.Y.: Pressure drawdown mechanism and design principle of jet pump bit. Sci. Iran. Trans. B Mech. Eng. 22(3), 792–803 (2015)

18.

Zhu, H.Y.; He, Y.F.: Reducing bottom-hole differential pressure by hydraulic jet. J. China Univ. Pet. 37(2), 50–56 (2013). https://doi.org/10.1016/j.oceaneng.2012.01.031 CrossRef

19.

Yaou, W.; Nathan, F.; Vishal, S.: Downhole drilling dynamics of innovative rathole elimination BHA in hole enlargement while drilling operations. In: SPE Drilling Conference and Exhibition, Fort Worth, Texas, USA, March 1–3 (2016)

20.

Graham, M.W.; Jay, G.; Gust, W.: Innovative product concepts and drilling practices improve bit and reamer performances in harsh drilling environments. In: SPE Drilling Conference and Exhibition, London, United Kingdom, March 17–19 (2015)

21.

Agustin, J.; Gumaro, G.; Cesar, K.: Advanced FEA modeling produces first directional tandem reamer BHA: Eliminates trip on deepwater exploration well. In: SPE Drilling Conference and Exhibition, Fort Worth, Texas, USA, March 4–6 (2014)

22.

Meng, T.; Hu, Y.; Fang, R.; et al.: Study of fracture toughness and weakening mechanisms in gypsum interlayers in corrosive environments. J. Natl. Gas Sci. Eng. 26, 356–366 (2015). https://doi.org/10.1016/j.jngse.2015.06.027 CrossRef

23.

Haiyan, Z.; Jingen, D.; Yuhong, X.; et al.: Characteristics of rock mechanics and PDC bit optimization of glutenite formation in the Pearl River Mouth Basin oilfields. Sci. Iran. Trans. A Civ. Eng. 20(4), 1133–1144 (2013)

24.

Haiyan, Z.; Jingen, D.; Yuhong, X.; et al.: Rock mechanics characteristic of complex formation and faster drilling techniques in Western South China Sea oilfields. Ocean Eng. 39(44), 33–45 (2012). https://doi.org/10.1016/j.oceaneng.2012.01.031 CrossRef

25.

Zijsling, D.H.; Illerhaus, R.: Eggbeater PDC drillbit design eliminates balling in water-based drilling fluids. In: SPE Annual Technical Conference and Exhibition, Amsterdam, March 11–14 (1993)

26.

Wells, M.; Marvel, T.: Bit balling mitigation in PDC bit design. In: IADC/SPE Asia Pacific Drilling Technology Conference and Exhibition, Bit Balling Mitigation in PDC Bit Design, Jakarta, Indonesia, August 25–27 (2008)

27.

Rafiee, S.E.; Rahimi, M.: Experimental study and three-dimensional (3D) computational fluid dynamics (CFD) analysis on the effect of the convergence ratio, pressure inlet and number of nozzle intake on vortex tube performance—validation and CFD optimization. Energy 63, 195–204 (2013). https://doi.org/10.1016/j.energy.2013.09.060 CrossRef

28.

Sawadogo, O.; Basson, G.R.; Schneiderbauer, S.: Physical and coupled fully three-dimensional numerical modeling of pressurized bottom outlet flushing processes in reservoirs. Int. J. Sediment Res. (2019). https://doi.org/10.1016/j.ijsrc.2019.02.001 CrossRef

29.

Bazgir, A.; Nabhani, N.; Eiamsa-ard, S.: Numerical analysis of flow and thermal patterns in a double-pipe Ranque–Hilsch vortex tube: influence of cooling a hot-tube. Appl. Therm. Eng. 144, 181–208 (2018). https://doi.org/10.1016/j.applthermaleng.2018.08.043 CrossRef

30.

Jian, Z.; Yongwang, L.; Hongjun, J.: Study to improve ROP in thick salt-gypsum lakers at KUQA piedmont area. Drill. Prod. Technol. 40(1), 21–24 (2017). https://doi.org/10.3969/J.ISSN.1006-768X.2017.01.06 CrossRef

31.

Dinghong, Y.; Jiangong, W.; Yajun, S.: Evolution characteristic of gypsum-salt rocks of the upper member of Oligocene Lower Ganchaigou Fm in the Shizigou area, western Qaidam Basin. Natl Gas Ind. B 4(5), 390–398 (2017). https://doi.org/10.1016/j.ngib.2017.10.004 CrossRef

32.

Lianzhong, S.; Jinshuang, Z.: Drilling parameter optimization method for PDC bit in shale formations. Drill. Prod. Technol. 38(3), 26–29 (2015). https://doi.org/10.3969/J.ISSN.1006-768X.2015.03.08 CrossRef

33.

Amri, M.; Pelfrene, G.; Jahangir, E.; Tijani, M.; Sellami, H.: Numerical and analytical study of rate effects on drilling forces under bottomhole pressure. Int. J. Rock Mech. Min. Sci. 110, 189–198 (2018). https://doi.org/10.1016/j.ijrmms.2018.07.017 CrossRef

34.

Gerbaud, L.; Menand, S.; Sellami, H.: PDC bits: all comes from the cutter rock interaction. In: IADC/SPE Drilling Conference, Miami, Florida, USA, February 21–23 (2006)

35.

Appl, F.C.; Wilson, C.C.; Laskhman, I.: Measurement of forces, temperatures and wear of PDC cutters in rock cutting. Wear 169(1), 9–24 (1993). https://doi.org/10.1016/0043-1648(93)90386-Z CrossRef

Titel: New Anti-balling Reamer Blade for Reaming in Soft and Sticky Formation Easy to Hydration and Collapsing
verfasst von: Jun Jing
Xiaohua Zhu
Liming Dai
Degui Wang
Publikationsdatum: 09.10.2019
Verlag: Springer Berlin Heidelberg
Erschienen in: Arabian Journal for Science and Engineering / Ausgabe 12/2019
Print ISSN: 2193-567X
Elektronische ISSN: 2191-4281
DOI: https://doi.org/10.1007/s13369-019-04158-1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 12/2019

Framing the Activation Energy and Binary Chemical Reaction on CNT’s with Cattaneo–Christov Heat Diffusion on Maxwell Nanofluid in the Presence of Nonlinear Thermal Radiation

Numerical Simulation of Bending Process for Steel Plate Using Finite Element Analysis

Comparative Investigation and Characterization of the Scratch and Wear Resistance Behavior of TiN, CrN, AlTiN and AlCrN Cathodic Arc PVD Coatings

Sustainable Approach for Tannery Wastewater Treatment: Bioelectricity Generation in Bioelectrochemical Systems

A State-of-the-Art Review on Manufacturing and Additive Influences on Sand-Cast Components

Comprehensive Study of Morphological Modification of Dual-Layer Hollow Fiber Membrane

Premium Partner

Marktübersichten