nach oben

Wood Science and Technology

Erschienen in:

25.09.2018 | Original

New method for determination of shear properties of wood

verfasst von: Robert Krüger, Beate Buchelt, André Wagenführ

Erschienen in: Wood Science and Technology | Ausgabe 6/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A new method for the determination of shear modulus and shear strength is presented in this study using a shear or picture frame. A shear frame in accordance with DIN SPEC 4885 is in other fields, such as fibre reinforced composites, state of the art. Here, a square test specimen with recessed corners is held in the shear frame and subjected to a quite uniform shear deformation state. To determine the shear modulus and the shear strength, tensile load acting on the shear frame and the associated shear strain are measured. This method has the advantage of simultaneous determination of the shear modulus and the shear strength. Thin square wooden plates of European beech (Fagus sylvatica L.) were tested in all anatomical directions. The results show good accordance with literature values. The highest values of shear modulus and shear strength were yielded for the LR plane, followed by the values in the LT plane. The tests in the RT plane clearly resulted in the lowest values.

Vorheriger Artikel Denoising module for wood texture images

Nächster Artikel Methodology for comparing wood adhesive bond load transfer using digital volume correlation

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Aicher S, Christian Z, Hirsch M (2016) Rolling shear modulus and strength of beech wood laminations. Holzforschung 70(8):773–781CrossRef

Arcan M (1984) The Iosipescu shear test as applied to composite materials—discussion. Exp Mech 24(1):66–67CrossRef

Arcan M, Hashin Z, Voloshin A (1978) A method to produce uniform plane-stress states with applications to fiber-reinforced materials. Exp Mech 18(4):141–146CrossRef

ASTM D143 (1994) Standard test methods for small clear specimens of timber. American Society for Testing and Materials, West Conshohocken

Bachtiar EV, Rüggeberg M, Hering S, Niemz P (2017) Estimating shear properties of walnut wood: a combined experimental and theoretical approach. Mater Struct 50(6):248CrossRef

Berner M, Gier J, Scheffler M, Hardtke H-J (2007) Identifikation von Werkstoffparametern an Platten aus Holz und Holzwerkstoffen mittels Modalanalyse (Identification of material parameters of wood and wood based panels by means of modal analysis). Holz Roh Werkst 65:367–375CrossRef

Bodig J, Jayne BA (1993) Mechanics of wood and wood composites. Krieger Publishing Company Malabar, Florida

Brabec M, Lagaňa R, Milch J, Tippner J, Sebera V (2017) Utilization of digital image correlation in determining of both longitudinal shear moduli of wood at single torsion test. Wood Sci Technol 51:29–45CrossRef

Bucur V (2006) Acoustics of wood, 2nd edn. Springer Series in Wood Science, Springer, Berlin

Bugiel A, Hähnel F, Wolf K, Strauß J, Kuntzsch T (2017) Enhanced test devices for the development of novel paper-like materials for sandwich-structures. In: I’Anson SJ (ed) Trans. XVIth fundamental research symposium, Oxford, FRC, pp 27–41

DIN 52187 (1979) Testing of wood; determination of ultimate shearing stress parallel to grain. DIN German Institute of Standardization, Berlin

DIN 53339 Part 2 (1982) Testing of reinforced plastics; shear test on plane specimens. DIN German Institute of Standardization, Berlin

DIN EN 789 (2004) Timber structures-Test methods-Determination of mechanical properties of wood based panels. European Committee for Standardization

DIN EN 13183-1 (2002) Moisture content of a piece of sawn timber Part 1: Determination by oven dry method. DIN German Institute of Standardization, Berlin

DIN SPEC 4885 (2014) Fibre-reinforced plastic composites –Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus. DIN German Institute of Standardization, Berlin

Dumond P, Baddour N (2015) Experimental investigation of the mechanical properties and natural frequencies of simply supported Sitka spruce plates. Wood Sci Technol 49:1137–1155CrossRef

Grimsel M (1998) Computer-aided identification of mechanical wood properties. Wood Struct Prop 98:185–192

Haines DW, Leban JM, Herbé C (1996) Determination of Young’s modulus for spruce, fir and isotropic materials by the resonance flexure method with comparisons to static flexure and other dynamic methods. Wood Sci Technol 30:253–263CrossRef

Hearmon RFS, Barkas WW (1941) The effect of grain direction on the Young’s moduli and rigidity moduli of beech and Sitka spruce. Proc Phys Soc 53:674–680CrossRef

Hering, S. (2011) Charakterisierung und Modellierung der Materialeigenschaften von Rotbuchenholz zur Simulation von Holzverklebungen (Characterization and modeling of beech wood for simulation of wood bondings). Dissertation ETH Zürich

Hering S, Keunecke D, Niemz P (2012) Moisture-dependent orthotropic elasticity of beech wood. Wood Sci Technol 46:927–938CrossRef

Horvath N, Molnar S, Niemz P (2008) Untersuchungen zum Einfluss der Holzfeuchte auf ausgewählte Eigenschaften von Fichte, Eiche und Rotbuche (Examinations on the influence of wood moisture on selected wood properties of spruce, oak and beech). Holztechnologie 49:10–15

Keunecke D, Sonderegger W, Pereteanu K, Lüthi T, Niemz P (2007) Determination of Young’s and shear moduli of common yew and Norway spruce by means of ultrasonic waves. Wood Sci Technol 41:309–327CrossRef

Liu JY (1984) New shear strength test for solid wood. Wood Fiber Sci 8(4):252–261

Liu JY (2002) Analysis of off-axis tension test of wood specimens. Wood Fiber Sci 34:205–211

Longo R, Laux D, Pagano S, Delaunay T, Le Clézio E, Arnould O (2018) Elastic characterization of wood by Resonant Ultrasound Spectroscopy (RUS): a comprehensive study. Wood Sci Technol 52(2):383–402. https://doi.org/10.1007/s00226-017-0980-z CrossRef

Majano-Majano A, Fernandez-Cabo JL, Hoheisel S, Klein S (2012) A test method for characterizing clear wood using a single specimen. Exp Mech 52:1079–1096CrossRef

Milch J, Brabec M, Sebera V, Tippner J (2017) Verification of the elastic material characteristics of Norway spruce and European beech in the field of shear behaviour by means of digital image correlation (DIC) for finite element analysis (FEA). Holzforschung 71(5):405–414CrossRef

Müller U, Ringhofer A, Brandner R (2015) Schickhofer G (2015) Homogeneous shear stress field of wood in an Arcan shear test configuration measured by means of electronic speckle pattern interferometry: description of the test setup. Wood Sci Technol 49:1123–1136CrossRef

Ozyhar T, Hering S, Sanabria SJ, Niemz P (2013) Determining moisture-dependent elastic characteristics of beech wood by means of ultrasonic waves. Wood Sci Technol 47:329–341CrossRef

Sretenovic A, Müller U, Gindl W, Teischinger A (2004) New shear assay for the simultaneous determination of shear strength and shear modulus in solid wood: finite element modelling and experimental results. Wood Fiber Sci 36(3):302–310

Stamer J, Siegelschmidt H (1935) Elastische Formänderungen der Hölzer (Elastic deformations of wood). Zeitschrift des Vereins deutscher Ingenieure 77. Heft 10:503–505 (German)

Xavier JC, Garrido NM, Oliveira M, Moraisa JL, Camanho PP, Pierron FA (2004) comparison between the Iosipescu and off-axis shear test methods for the characterization of Pinus Pinaster Ait. Compos A 35:827–840CrossRef

Xavier J, Avril S, Pierron F, Morais J (2007) Novel experimental approach for longitudinal-radial stiffness characterisation of clear wood by a single test. Holzforschung 61:573–581CrossRef

Xavier JC, Oliveira M, Morais J, Pinto T (2009) Measurement of the shear properties of clear wood by the Arcan test. Holzforschung 63:217–225CrossRef

Yoshihara H (2012) Shear modulus and shear strength evaluation of solid wood by a modified ISO 15310 square-plate twist method. Drvna Industrija 63(1):51–55CrossRef

Yoshihara H, Ohsaki O, Kubojima Y, Ohta M (1999) Applicability of the Iosipescu shear test on the measurement of the shear properties of wood. J Wood Sci 45:24–29CrossRef

Zhang L, Yang N (2017) Evaluation of a modified Iosipescu shear test method for determining the shear properties of clear wood. Wood Sci Technol 51:323–343CrossRef

Titel: New method for determination of shear properties of wood
verfasst von: Robert Krüger
Beate Buchelt
André Wagenführ
Publikationsdatum: 25.09.2018
Verlag: Springer Berlin Heidelberg
Erschienen in: Wood Science and Technology / Ausgabe 6/2018
Print ISSN: 0043-7719
Elektronische ISSN: 1432-5225
DOI: https://doi.org/10.1007/s00226-018-1053-7

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 6/2018

Wood polymer nanocomposites from functionalized soybean oil and nanoclay

The kinetics of wooden bilayers is not affected by different wood adhesive systems

Chemical composition of lipophilic extractives from six Eucalyptus barks

Air-coupled ferroelectret ultrasonic transducers for nondestructive testing of wood-based materials

Moisture behavior of weathered wood surfaces during cyclic wetting: measurements and modeling

Methodology for comparing wood adhesive bond load transfer using digital volume correlation