Skip to main content
main-content

Tipp

Weitere Artikel dieser Ausgabe durch Wischen aufrufen

26.10.2019 | Original | Ausgabe 6/2019

European Journal of Wood and Wood Products 6/2019

Non-destructive detection of density and moisture content of heartwood and sapwood based on X-ray computed tomography (X-CT) technology

Zeitschrift:
European Journal of Wood and Wood Products > Ausgabe 6/2019
Autoren:
Qingping Wang, Xing’e Liu, Shumin Yang, Mingliang Jiang, Jinzhen Cao
Wichtige Hinweise

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Abstract

Density and moisture content (MC) are two of the most important wood performance indexes, which are highly correlated with many other physical and mechanical properties of wood. X-ray computed tomography (X-CT) technology was used to analyze the difference in the CT number of the heartwood and sapwood of Chinese white poplar (Populus tomentosa) and Masson pine (Pinus massoniana) under different MC. Additionally, the fitted models of CT number-density and CT number-MC were established and validated for the heartwood and sapwood of P. tomentosa and P. massoniana. The methodological improvement has been described in detail regarding the established models, which are contrasted and discussed with previous models. The results showed that the CT number-density fitted models of the heartwood and sapwood of P. tomentosa and P. massoniana adopted the linear model: \( D = k \times H + b \), where D is the density, H is the CT number, k is the slope, and b is the intercept. R2 values obtained in the validation models were all higher than 0.98, indicating that the CT number-density fitted models can reliably predict wood density. The CT number-MC fitted models for the heartwood and sapwood of P. tomentosa and P. massoniana adopted the logarithmic model: \( M = \ln ((a + b \times H)^{100} ) \), where M is the MC, H is the CT number, and a and b are the correlation coefficients in the model. R2 values obtained in the validation models were all higher than 0.95, indicating that this model is valid for the accurate prediction of wood MC. The fitted model parameters of heartwood and sapwood indicated that the X-CT technology was effective for identifying the difference in density and MC of heartwood and sapwood. Therefore, it is feasible to use non-destructive testing technology when studying density and MC of heartwood and sapwood based on X-CT technology. The study results provide reference data for the non-destructive testing of wood properties and reasonable utilization.

Bitte loggen Sie sich ein, um Zugang zu diesem Inhalt zu erhalten

Sie möchten Zugang zu diesem Inhalt erhalten? Dann informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 69.000 Bücher
  • über 500 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Umwelt
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Testen Sie jetzt 30 Tage kostenlos.

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 58.000 Bücher
  • über 300 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Testen Sie jetzt 30 Tage kostenlos.

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 50.000 Bücher
  • über 380 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Umwelt
  • Maschinenbau + Werkstoffe




Testen Sie jetzt 30 Tage kostenlos.

Literatur
Über diesen Artikel

Weitere Artikel der Ausgabe 6/2019

European Journal of Wood and Wood Products 6/2019 Zur Ausgabe