Nonisothermal Crystallization Kinetics of Glassy Mold Fluxes

Crystallization of the solid glassy mold flux film occurring in the gap between the initial shell and mold wall is important, as it determines the in-mold heat transfer and mold lubrication during the process of continuous casting. In order to study the nonisothermal crystallization behavior of the glassy mold flux film in the continuous casting mold, the continuous heating transformation diagram, crystallization mechanism, and precipitate phases were investigated using the single hot thermocouple technique, kinetic models, a scanning electron microscope, and an energy-dispersive spectrometer (EDS). The results show that the initial crystallization temperature for CaO-SiO₂ based flux A ranges from [1086 K to 1147 K (813 °C to 874 °C)], which is lower than the case of CaO-Al₂O₃ based flux B ranging from [1205 K to 1245 K (932 °C to 972 °C)]. The crystallization kinetics for flux A are constant nucleation rate, two-dimensional growth, and control by diffusion. For flux B, they are constant nucleation rate, three-dimensional growth, and control by interface reaction. Besides, the EDS results indicate that the precipitate crystals in fluxes A and B are CaSiO₃ and Ca₂AlSiO₄, respectively.