nach oben

Journal of Material Cycles and Waste Management

Erschienen in:

25.09.2019 | ORIGINAL ARTICLE

Numerical analysis of the effect of the suction mode in the wind force sorting of a mobile coastal debris treatment system

verfasst von: Jonghyuk Yoon, Do-Yong Kim, Daegi Kim

Erschienen in: Journal of Material Cycles and Waste Management | Ausgabe 1/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Coastal debris has emerged as a serious problem of late, but it can be used to produce high-quality solid recovered fuel (SRF). In addition, a parametric study was conducted to determine the effect of changing the suction mode on the particle behavior, and the results revealed that the suction mode influences the flow characteristics inside the sorting system and determines the inflow rate and ratio. Based on these analysis results by numerical analysis, the separation efficiency of each suction mode was numerically predicted. The optimal model as B2 had the highest separation efficiency of 80.2%. These study findings will offer appropriate wind power sorting conditions according to the purpose of separating the target material from the coastal debris for solid fuel production including their next product through sorting.

Vorheriger Artikel Effects of area characteristics and municipal waste collection fees on household waste generation

Nächster Artikel Chromium slag detoxification by carbon monoxide off-gases and optimization of detoxification parameters by Box–Behnken design

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Ardron J, Gjerde K, Pullen S, Tilot V (2008) Marine spatial planning in the high seas. Mar Policy 32(5):832–839CrossRef

Ariza E, Jiménez JA, Sardá R (2008) A critical assessment of beach management on the Catalan coast. Ocean Coast Manag 51(2):141–160CrossRef

Villarrubia-Gómez P, Cornell SE, Fabres J (2018) Marine plastic pollution as a planetary boundary threat–The drifting piece in the sustainability puzzle. Mar Policy 96:213–220CrossRef

Critchell K, Lambrechts J (2016) Modelling accumulation of marine plastics in the coastal zone; what are the dominant physical processes? Estuar Coast Shelf Sci 171:111–122CrossRef

Kandziora JH, van Toulon N, Sobral P, Taylor HL, Ribbink AJ, Jambeck JR, Werner S (2019) The important role of marine debris networks to prevent and reduce ocean plastic pollution. Mar Pollut Bull 141:657–662CrossRef

Koelmans AA, Gouin T, Thompson R, Wallace N, Arthur C (2014) Plastics in the marine environment. Environ Toxicol Chem 33(1):5–10CrossRef

Sheavly SB, Register KM (2007) Marine debris and plastics: environmental concerns, sources, impacts and solutions. J Polym Environ 15(4):301–305CrossRef

Derraik JG (2002) The pollution of the marine environment by plastic debris: a review. Mar Pollut Bull 44(9):842–852CrossRef

Possatto FE, Barletta M, Costa MF, do Sul JAI, Dantas DV (2011) Plastic debris ingestion by marine catfish: an unexpected fisheries impact. Mar Pollut Bull 62(5):1098–1102CrossRef

10.

Thiel M, Hinojosa IA, Miranda L, Pantoja JF, Rivadeneira MM, Vásquez N (2013) Anthropogenic marine debris in the coastal environment: a multi-year comparison between coastal waters and local shores. Mar Pollut Bull 71(1–2):307–316CrossRef

11.

Inazumi S, Kakuda T (2014) Performance of water cut-off and remediation promotion techniques at coastal waste landfill sites. J Mater Cycles Waste Manag 16(3):533–545CrossRef

12.

Jeong SB, Lee DI, Cho HS, Kim YJ (2005) Characteristics of marine litters distribution on the sea-bed of the East China Sea (in Korean). J Korean Soc Mar Environ Energy 8(4):220–226

13.

Kim MS (2010) Distribution of marine litters in the sea area between Busan and Jeju Island (in Korean). Jour Fish Mar Sci Edu 22(3):354–361

14.

Marine Litter Information System, Korea (2018) Marine Litter statistics reports. https://www.malic.or.kr/rest/monitoring/year/null/null/null/. Accessed 2017

15.

Kim D, Kim DY, Son MY (2017) A Study on Physicochemical Characteristics of Coastal Wastes in Island Areas (in Korean). J Korean Soc Environ Technol 18(3):259–266

16.

Pietrelli L, Poeta G, Battisti C, Sighicelli M (2017) Characterization of plastic beach debris finalized to its removal: a proposal for a recycling scheme. Environ Sci Pollut Res 24(19):16536–16542CrossRef

17.

Aydın C, Güven O, Salihoğlu B, Kıdeyş AE (2016) The influence of land use on coastal litter: an approach to identify abundance and sources in the coastal area of Cilician Basin. Turkey. Turk J Fish Aquat Sci 16(1):029–039

18.

Borrelle SB, Rochman CM, Liboiron M, Bond AL, Lusher A, Bradshaw H, Provencher JF (2017) Opinion: why we need an international agreement on marine plastic pollution. Proc Natl Acad Sci 114(38):9994–9997CrossRef

19.

Iñiguez ME, Conesa JA, Fullana A (2017) Pollutant content in marine debris and characterization by thermal decomposition. Mar Pollut Bull 117(1–2):359–365CrossRef

20.

Wichai-utcha N, Chavalparit O (2019) 3Rs Policy and plastic waste management in Thailand. J Mater Cycles Waste 21:10–22CrossRef

21.

Tran VCM, Le HS, Matsui Y (2019) Current status and behavior modeling on household solid-waste separation: a case study in Da Nang city. Vietnam. J Mater Cycles Waste 2019:1–15

22.

Center, Japan Environmental Sanitation (2012) Solid waste management and recycling technology of Japan. Minister’s Secretariat Waste Management and Recycling Department, Nagoya. https://www.env.go.jp/en/recycle/smcs/attach/swmrt.pdf

23.

Corrêa JLG, Graminho DR, Silva MA, Nebra SA (2004) The cyclonic dryer: a numerical and experimental analysis of the influence of geometry on average particle residence time. Braz J Chem Eng 21(1):103–112CrossRef

24.

Yang Q, Lv WJ, Ma L, Wang HL (2013) CFD study on separation enhancement of mini-hydrocyclone by particulate arrangement. Sep Pur Technol 102:15–25CrossRef

25.

Ma L, Fu P, Wu J, Wang F, Li J, Shen Q, Wang H (2015) CFD simulation study on particle arrangements at the entrance to a swirling flow field for improving the separation efficiency. Aerosol Air Qual Res 15:2456–4565CrossRef

26.

Safikhani H, Mehrabian P (2016) Numerical study of flow field in new cyclone separators. Adv Powder Technol 27:379–387CrossRef

27.

Yuan H, Fu S, Tan W, He J, Wu K (2015) Study on the hydrocyclonic separation of waste plastics with different density. Waste Manage 45:108–111CrossRef

28.

Chu KW, Chen J, Wang B, Yu AB, Vince A, Barnett GD, Barnett PJ (2017) Understand solids loading effects in a dense medium cyclone: effect of particle size by a CFD-DEM method. Pow Technol 320:594–609CrossRef

29.

Pieper C, Maier G, Pfaff F, Kruggel-Emden H, Wirtz S, Gruna R, Noack B, Scherer V, Längle T, Beyerer J, Hanebeck UD (2016) Numerical modeling of an automated optical belt sorter using the Discrete Element Method. Pow Technol 301:805–814CrossRef

30.

Fitzpatrick RS, Glass HJ, Pascoe RD (2015) CFD–DEM modelling of particle ejection by a sensor-based automated sorter. Miner Eng 79:176–184CrossRef

31.

Yoon JH, Kim DY, Kim D (2018) A numerical study on the behavior of coastal waste particles in a wind-power sorting system for renewable fuel production. Waste Mange 80:387–396CrossRef

32.

ANSYS Inc., (2017) The Manual of ANSYS CFX, Version 18.0, USA

33.

Park JS (2011) The study on characteristics of marine litter for optimal disposal. Dissertation, Mokpo National University, Korea

34.

Rietema K (1957) On the efficiency in separating mixtures of two constituents. Chem Eng Sci 7:89–96CrossRef

Titel: Numerical analysis of the effect of the suction mode in the wind force sorting of a mobile coastal debris treatment system
verfasst von: Jonghyuk Yoon
Do-Yong Kim
Daegi Kim
Publikationsdatum: 25.09.2019
Verlag: Springer Japan
Erschienen in: Journal of Material Cycles and Waste Management / Ausgabe 1/2020
Print ISSN: 1438-4957
Elektronische ISSN: 1611-8227
DOI: https://doi.org/10.1007/s10163-019-00920-7

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2020

Optimization of the municipal solid waste management system using a hybrid life cycle assessment–emergy approach in Tehran

Recycling of pre-treated medical waste fly ash in mortar mixtures

Analysis of the comprehensive management of sewage sludge in Poland

Comparative leaching characteristics of fly/bottom ashes from municipal solid waste incineration under various environmental stresses

A mini literature review on sustainable management of poultry abattoir wastes

Possible use of gypsum waste from ceramics industry as semi-reinforcing filler in epoxidized natural rubber composites