nach oben

Metallurgist

Erschienen in:

18.05.2017

Oil Absorption Capacity of the Contact Surfaces in Metal-Forming Processes

verfasst von: N. N. Ogarkov, S. I. Platov, E. S. Shemetova, M. N. Samodurova, D. V. Terent’ev, V. A. Nekit

Erschienen in: Metallurgist | Ausgabe 1-2/2017

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The results of studying the surfaces roughness of rolls, dies, and workpiece are presented and analyzed. Recommendations are formulated on selecting rational surface finishing methods for rolls and dies and methods for preparation of blanks for drawing. The oil absorption capacity of surfaces depending on their roughness caused by the machining method used is determined. The results can be used for choosing surface finishing methods, tools, and materials, depending on the intended metal-forming process.

Vorheriger Artikel Designing Schedules for the Cold Rolling of Tubes Without Intermediate Annealings

Nächster Artikel Preparation of Bimetal with Good Damping Properties

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

V. K. Belov, M. V. Ponomarev, and A. V. Gorbunov, “Revisiting the technique of determining the oil absorption capacity of rough surface,” in: Simulation and Development of Metal-Forming Processes, V. M. Salganik (ed.), Izd. MGTU im Nosova, Magnitogorsk (2011), pp. 220–224.

V. L. Steblyanko and A. R. Adaev, “Improving the quality management of metal surface finish by controlling its physicochemical state based on the electric potential,” Vest. MGTU im. Nosova, No. 3, 60–63 (2008).

N. N. Ogarkov, Yu. D. Zaletov, S. A. Las’kov, et al., “Improving the wheel blasting of rolls for the production of autobody sheet,” Vest. MGTU im. Nosova, No. 2, 41–43 (2010).

V. T. Tilik, O. V. Simenenko, and A. G. Nikolenko, “New autobody-sheet rolling process using MMK-MiniMax emulsion,” Chern. Metallurg.: Byull. NTI, No. 11, 41–43 (2001).

N. N. Ogarkov, M. V. Nalimova, and A. A. Starushko, “Influence of the drawing conditions and the method of preparing the core on the adhesive strength with coating of long products,” in: Proc. All-Russ. Sci.-Tech. Conf. on Advanced Technologies in Mechanical Engineering and Instrument Making, NGTU–AfNGTU, N. Novgorod–Arzamas (2002), pp. 35–39.

N. N. Ogarkov and E. S. Shemetova, “Influence of roughness parameters on the shell–core coupling during drawing of a bimetallic wire,” in: Modern Design Methods and Technologies of Metallurgical Mechanical Engineering, Izd. MGTU im. Nosova, Magnitogorsk (2015), pp. 15–17.

S. I. Platov, N. N. Ogarkov, D. M. Terent’ev, et al., “Developing the theory and technology of designing machines, units, and tools for forming and cutting processes,” Vest. MGTU im. Nosova, No. 1, 112–114 (2014).

N. N. Ogarkov, Yu. D. Zaletov, D. P. Kanaev, and D. I. Min’ko, “Improving the durability of upsetting tool by finishing and hardening,” Vest. MGTU im. Nosova, No. 2, 61–63 (2008).

A. V. Shchedrin, V. V. Ul’yanov, V. M. Skoromnov, and A. A. Bekaev, “Influence of lubrication properties on the characteristics of combined drawing by a tool with regular surface roughness,” Proizv. Prokata, No. 4, 33–36 (2007).

10.

V. P. Mushtei, M. P. Glushkov, V. P. Tumbina, et al., “Development of a wire drawing technology with acid-free surface treatment,” Stal, No. 8, 50–51 (1997).

11.

E. P. Noskov, Yu. F. Bakhmatov, M. A. Polyakova, et al., “Studying the microgeometry of a wire rod after descaling,” in: Continuous and Laminated Materials: Coll. Sci. Works, MGSA, Magnitogorsk (1995), pp. 73–76.

12.

A. M. Dolzhanskii, “Theoretical description of the influence of roughness on the entrainment of dry lubrication during drawing,” Izv. VUZov, Chern. Metall., No. 7, 34–37 (1997).

13.

G. A. Vinogradov, V. G. Mishchanin, G. Ya. Kalutskii, et al., “Influence of the surface finish of the steel core on the properties of a steel–aluminum bimetallic wire,” Stal, No. 11, 1050–1052 (1971).

14.

N. N. Ogarkov, Mathematical Description of the Material Distribution in the Rough Surface Layer of a Tooling, Dep. VINITI, No. 2550-V94, Moscow (1994).

15.

S. M. Vershigora and M. M. Bol’shakova, “Improvement of the pre-drawing rod surface preparation technology,” Stal, No. 10, 50–52 (1997).

16.

A. A. Mamykina, Yu. P. Balakov, I. A. Chkuvashov, et al., “Effective method of preparing the wire surface for coating,” in: Production of Hardware with Protective Coating, Metallurgiya, Moscow (1984), pp. 44–46.

Titel: Oil Absorption Capacity of the Contact Surfaces in Metal-Forming Processes
verfasst von: N. N. Ogarkov
S. I. Platov
E. S. Shemetova
M. N. Samodurova
D. V. Terent’ev
V. A. Nekit
Publikationsdatum: 18.05.2017
Verlag: Springer US
Erschienen in: Metallurgist / Ausgabe 1-2/2017
Print ISSN: 0026-0894
Elektronische ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-017-0454-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1-2/2017

Preparation of Bimetal with Good Damping Properties

Correlation of Metallized Pellet Decarburization, Heating, and Melting in an Arc Furnace

Contamination of the Metal of a Large Ingot by Oxide, Sulfide, and Oxysulfide Inclusions

A Die Assembly for Hydrodynamic Drawing of Nichrome Strips

Solidification Conditions for High-Strength Aluminum Alloy Ingots with Increased Transition Metal Content

Nature of Angular Carbides in Damascus Steel

Premium Partner

Marktübersichten