nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

37. On the Application of SK Critical Plane Method for Multiaxial Fatigue Analysis of Low Carbon Steel

verfasst von : A. S. Cruces, P. Lopez-Crespo, S. Sandip, B. Moreno

Erschienen in: Mechanical Fatigue of Metals

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this work Suman-Kallmeyer critical plane model is assessed and compared to few other critical plane models. The analysis is based on both in-phase proportional loading and out-of-phase non-proportional loading applied to a low carbon steel. A wide range of loading scenarios were studied by combining axial and torsional loads, producing fatigue lives in the range of 10³ to 10⁶ cycles. The study allowed low and high cycle fatigue regimes to be assessed. In addition, the hardening effect was also investigated. Finally, a comparison with well established critical plane models is also performed.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Multiaxial Fatigue Analysis of Stainless Steel Used in Marine Structures

Nächstes Kapitel Fatigue Testing at 1000 Hz Testing Frequency

Cruces AS, Lopez-Crespo P, Bressan S, Itoh T (2019) Investigation of the multiaxial fatigue behaviour of 316 stainless steel based on critical plane method. Fatigue Fract Eng Mater Struct, accepted for publication. https://doi.org/10.1111/ffe.12991

Moreno B, Martin A, Lopez-Crespo P, Zapatero J, Dominguez J (2016) Estimations of fatigue life and variability under random loading in aluminum Al-2024T351 using strip yield models from NASGRO. Int J Fatigue 91:414–422

Filippini M, Foletti S, Papadopoulos IV, Sonsino CM (2003) A multiaxial fatigue life criterion for nonsymmetrical and non-proportional elasto-plastic deformation. In: Carpinteri A, Spagnoli A, de-F M (eds) Biaxial/Multiaxial Fatigue and Fracture. Elsevier Science and ESIS, pp 383–400

Brown MW, Miller KJ (1973) A theory for fatigue failure under multiaxial stress-strain conditions. Proc Inst Mech Eng 187:745–755CrossRef

Lopez-Crespo P, Pommier S (2008) Numerical analysis of crack tip plasticity and history effects under mixed mode conditions. J Solid Mech Mater Eng 2:1567–1576CrossRef

Lopez-Crespo P, Garcia-Gonzalez A, Moreno B et al (2015) Some observations on short fatigue cracks under biaxial fatigue. Theor Appl Fract Mech 80:96–103CrossRef

Tanaka K, Takahash H, Akiniwa Y (2006) Fatigue crack propagation from a hole in tubular specimens under axial and torsional loading. Int J Fatigue 28:324–334. https://doi.org/10.1016/j.ijfatigue.2005.08.001CrossRef

Lopez-Crespo P, Moreno B, Lopez-Moreno A, Zapatero J (2015) Study of crack orientation and fatigue life prediction in biaxial fatigue with critical plane models. Eng Fract Mech 136:115–130CrossRef

Mokhtarishirazabad M, Lopez-Crespo P, Moreno B et al (2017) Optical and analytical investigation of overloads in biaxial fatigue cracks. Int J Fatigue 100 part 2:583–590

10.

Chen X, Gao Q, Sun XF (1994) Damage analysis of low-cycle fatigue under non-proportional loading. Int J Fatigue 16:221–225CrossRef

11.

Chu C (1995) Fatigue damage calculation using critical plane aproach. J Eng Mater Technol 117:41–49CrossRef

12.

Socie DF, Marquis GB (2000) Multiaxial fatigue. Society of Automotive Engineers Inc, Warrendale, PA (USA)

13.

Suman S, Kallmeyer A, Smith J (2016) Development of a multiaxial fatigue damage parameter and life prediction methodology for non-proportional loading. Frat Ed Integrità Strutt 38:224–230CrossRef

14.

Fatemi A, Socie DF (1988) A critical plane approach to multiaxial fatigue damage including out-of-phase loading. Fatigue Fract Eng Mater Struct 11:149–165CrossRef

15.

Wang CH, Brown MW (1993) A path-independent parameter for fatigue under proportional and non-proportional loading. Fatigue Fract Eng Mater Struct 16:1285–1298CrossRef

16.

Liu KC (1993) A method based on virtual strain energy parameters for multiaxial fatigue life prediction. In: Advances in Multiaxial Fatigue, ASTM STP 1191. pp 67–84

17.

Cruces AS, Lopez-Crespo P, Moreno B, Antunes FV (2018) Multiaxial fatigue life prediction on S355 structural and offshore steel using SKS critical plane model. Metals 8(12):1060. https://doi.org/10.3390/met8121060

Titel: On the Application of SK Critical Plane Method for Multiaxial Fatigue Analysis of Low Carbon Steel
verfasst von: A. S. Cruces
P. Lopez-Crespo
S. Sandip
B. Moreno
Verlag: Springer International Publishing
Buch: Mechanical Fatigue of Metals
Print ISBN: 978-3-030-13979-7

Electronic ISBN: 978-3-030-13980-3

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-030-13980-3_37

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht