nach oben

Journal of Materials Engineering and Performance

Erschienen in:

27.09.2017

On the Influence of the Heat Treatment Temperature on the Superelastic Compressive Behavior of the Ni-Rich NiTi Shape Memory Alloy

verfasst von: B. Ben Fraj, A. Gahbiche, S. Zghal, Z. Tourki

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 11/2017

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this paper, the relationship between the heat treatment temperature and the thermomechanical behavior of the Ni-rich NiTi shape memory alloy was experimentally investigated. Thermal analysis was performed through a differential scanning calorimetry experiments, and the NiTi superelastic effect was exhibited through loading/unloading compression cycle. It was found that the transformation temperatures and the compressive mechanical response are strongly affected by the heat treatment temperatures. The stress-induced phase transformation was characterized through the relationship between the heat treatment temperature and transformation stresses, elastic moduli and the deformation level upon loading. Subsequently, the evolution of the mechanical hysteresis loops and the mechanical dissipated energy was discussed. The obtained findings are supported by hardness measurements. To better understand the global tendency of the various phase transformation stages, the critical stress-temperature diagram was provided for different proposed heat treatment temperatures.

Vorheriger Artikel Tribological Characterization of SiC and B4C Manufactured by Plasma Pressure Compaction

Nächster Artikel Low-Velocity Impact Wear Behavior of Ball-to-Flat Contact Under Constant Kinetic Energy

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

L. Orgéas and D. Favier, Stress-Induced Martensitic Transformation of a NiTi Alloy in Isothermal Shear, Tension and Compression, Acta Mater., 1998, 46(15), p 5579–5591CrossRef

M.S. Alam, M.A. Youssef, and M. Nehdi, Utilizing Shape Memory Alloys to Enhance the Performance and Safety of Civil Infrastructure: A Review, Can. J. Civ. Eng., 2007, 34, p 1075–1086CrossRef

C. Elibol and M.F.-X. Wagner, Investigation of the Stress-Induced Martensitic Transformation in Pseudoelastic NiTi Under Uniaxial Tension, Compression and Compression-Shear, Mater. Sci. Eng., A, 2015, 621, p 76–81CrossRef

T.W. Duerig and K. Bhattacharya, The Influence of the R-phase on the Superelastic Behavior of NiTi, Shape Mem. Superelasticity, 2015, 1, p 153–161CrossRef

J. Eaton-Evans, J.M. Dulieu-Barton, E.G. Little, and I.A. Brown, Observations During Mechanical Testing of Nitinol, JMES79, in Proceedings of IMechE 222 Part C, 2008, p 97–105

E. Patoor, D.C. Lagoudas, P.B. Entchev, L.C. Brinson, and X. Gao, Shape Memory Alloys, Part I: General Properties and Modeling of Single Crystals, Mech. Mater., 2006, 38, p 391–429CrossRef

K. Tanaka, A Thermomechanical Sketch of Shape Memory Effect: One Dimensional Tensile Behaviour, Res. Mech., 1986, 18, p 251–263

C. Liang and C.A. Rogers, One Dimensional Thermomechanical Constitutive Relations for Shape Memory Material, J. Intell. Mater. Syst. Struct., 1990, 1, p 207–234CrossRef

L.C. Brinson, One-Dimensional Constitutive Behavior of Shape Memory Alloys: Thermomechanical Derivation with Non-Constant Material Functions and Redefined Martensite Internal Variable, J. Intell. Mater. Syst. Struct., 1993, 4, p 229–242CrossRef

10.

M. Brocca, L.C. Brinson, and Z.P. Bazant, Three-Dimensional Constitutive Model for Shape Memory Alloys Based on Microplane Model, J. Mech. Phys. Solids, 2002, 50, p 1051–1077CrossRef

11.

H. Sadiq, M.B. Wong, R. Al-Mahaidi, and X.L. Zhao, The Effects of Heat Treatment on the Recovery Stresses of Shape Memory Alloys, Smart Mater. Struct., 2010, 19, p 035021CrossRef

12.

F. Khaleghi, J. Khalil-Allafi, V. Abbasi-Chianeh, and S. Noori, Effect of Short-Time Annealing Treatment on the Superelastic Behavior of Cold Drawn Ni-rich NiTi Shape Memory Wires, J. Alloys Compd., 2013, 554, p 32–38CrossRef

13.

X. Wang, B. Verlinden, and J.V. Humbeeck, Effect of Post-Deformation Annealing on the R-phase Transformation Temperatures in NiTi Shape Memory Alloys, Intermetallics, 2015, 62, p 43–49CrossRef

14.

G. Eggeler, J. Khalil-Allafi, S. Gollerthan, C. Somsen, W. Schmahl, and D. Sheptyakov, On the Effect of Aging on Martensitic Transformations in Ni-rich NiTi Shape Memory Alloys, Smart Mater. Struct., 2005, 14, p 186–191CrossRef

15.

M. Nishida, C.M. Wayman, and T. Honma, Precipitation Processes in Near-Equiatomic TiNi Shape Memory Alloys, Metall. Mater. Trans. A, 1986, 17A, p 1505–1515CrossRef

16.

Y. Motemani, M. Nili-Ahmadabadi, M.J. Tan, M. Bornapour, and Sh Rayagan, Effect of Cooling Rate on the Phase Transformation Behavior and Mechanical Properties of Ni-rich NiTi Shape Memory Alloy, J. Alloys Compd., 2009, 469, p 164–168CrossRef

17.

B. Ben Fraj, and Z. Tourki, in the 23rd International Federation of Heat Treatment and Surface Engineering Congress, Savannah, Georgia, USA, 2016, p 481–486

18.

K. Kazemi-Choobi, J. Khalil-Allafi, and V. Abbasi-Chianeh, Influence of Recrystallization and Subsequent Aging Treatment on Superelastic Behavior and Martensitic Transformation of Ni50.9Ti Wires, J. Alloys Compd., 2014, 582, p 348–354CrossRef

19.

F. Sczerzenie, G. Paul, and C. Belden, Comparison of Inclusions in Cold Drawn Wire and Precursor Hot-Rolled Rod Coil in VIM-VAR Nickel-Titanium Alloy, JMEPEG, 2011, 20, p 752–756CrossRef

20.

X. Wang, B. Amin-Ahmadi, D. Schryvers, B. Verlinden, and J.V. Humbeeck, Effect of Annealing on the Transformation Behavior and Mechanical Properties of Two Nanostructured Ti-50.8at.%Ni Thin Wires Produced by Different Methods, Mater. Sci. Forum, 2013, 738–739, p 306–310

21.

Y. Kim, Fatigue Properties of the Ti-Ni Base Shape Memory Alloy Wire, Mater. Trans., 2002, 43(7), p 1703–1706CrossRef

22.

J. Khalil-Allafi and B. Amin-Ahmadi, The Effect of Chemical Composition on Enthalpy and Entropy Changes of Martensitic Transformations in Binary NiTi Shape Memory Alloys, J. Alloys Compd., 2009, 487, p 363–366CrossRef

23.

C.B. Churchill, J.A. Shaw, and M.A. Iadicola, Tips and Tricks for Characterizing Shape Memory Alloy Wire: Part 2—Fundamental Isothermal Responses, Exp. Tech., 2009, doi:10.1111/j.1747-1567.2008.00460.x

24.

G. Laplanche, T. Birk, S. Schneider, J. Frenzel, and G. Eggeler, Effect of Temperature and Texture on the Reorientation of Martensite Variants in NiTi Shape Memory Alloys, Acta Mater., 2017, doi:10.1016/j.actamat.2017.01.023

25.

K. Kazemi-Choobi, J. Khalil-Allafi, and V. Abbasi-Chianeh, Study of the Precipitation of Ni₄Ti₃ Particles During Aging of Ni-rich NiTi Shape Memory Wires using in-Situ Electrical Resistance Measurement, in 3rd International Conference on Manufacturing Engineering, Tehran, Iran, 2011

26.

X. Wang, S. Kustov, B. Verlinden, and J.V. Humbeeck, Fundamental Development on Utilizing the R-phase Transformation in NiTi Shape Memory Alloys, Shape Mem. Superelasticity, 2015, 1, p 231–239CrossRef

27.

K. Gall, H. Sehitoglu, Y.I. Chumlyakov, and I.V. Kireeva, Tension-Compression Asymmetry of the Stress-Strain Response in Aged Single Crystal and Polycrystalline NiTi, Acta Mater., 1999, 47(4), p 1203–1217CrossRef

28.

Y. Liu, Z. Xie, J.V. Humbeeck, and L. Delaey, Asymmetry of Stress-Strain Curves Under Tension and Compression for NiTi Shape Memory Alloys, Acta Mater., 1998, 46(12), p 4325–4338CrossRef

29.

W.W. Chen, Q. Wu, J.H. Kang, and N.A. Winfree, Compressive Superelastic Behavior of a NiTi Shape Memory Alloy at Strain Rates of 0.001–750 s⁻¹, Int. J. Solids Struct., 2001, 38, p 8989–8998CrossRef

30.

S.N. Nasser and W.G. Guo, Superelastic and Cyclic Response of NiTi SMA at Various Strain Rates and Temperatures, Mech. Mater., 2006, 38, p 463–474CrossRef

31.

I. Kaya, Shape Memory and Transformation Behavior of High Strength 60NiTi in Compression, Smart Mater. Struct., 2016, 25, p 125031CrossRef

32.

I. Kaya, H. Tobe, H.E. Karaca, B. Basaran, M. Nagasako, R. Kainuma, and Y. Chumlyakov, Effects of Aging on the Shape Memory and Superelasticity Behavior of Ultra-High Strength Ni54Ti46 Alloys Under Compression, Mater. Sci. Eng., A, 2016, 678, p 93–100CrossRef

33.

R.R. Adharapurapu and K.S. Vecchio, Superelasticity in a New Bioimplant Material: Ni-rich 55NiTi Alloy, Exp. Mech., 2007, 47, p 365–371CrossRef

34.

K. Nurveren, A. Akdogan, and W.M. Huang, Evolution of Transformation Characteristics with Heating/Cooling Rate in NiTi Shape Memory Alloys, J. Mater. Process. Technol., 2008, 196, p 129–134CrossRef

35.

K. Kus and T. Breczko, DSC Investigations of the Effect of Annealing Temperature on the Phase Transformation Behaviour in Ni-Ti Shape Memory Alloy, Mater. Phys. Mech., 2010, 9, p 75–83

36.

A.R. Pelton, J. Dicello, and S. Miyazaki, Optimisation of Processing and Properties of Medical Grade Nitinol Wire, Minim. Invasive Ther. Allied Technol., 2000, 9(1), p 107–118CrossRef

37.

H. Sehitoglu, I. Karaman, R. Anderson, X. Zhang, K. Gall, H.J. Maier, and Y. Chumlyakov, Compressive Response of NiTi Single Crystals, Acta Mater., 2000, 48, p 3311–3326CrossRef

38.

J. Khalil-Allafi, A. Dlouhy, and G. Eggeler, Ni₄Ti₃-Precipitation During Aging of NiTi Shape Memory Alloys and Its Influence on Martensitic Phase Transformations, Acta Mater., 2002, 50, p 4255–4274CrossRef

39.

Y. Zheng, F. Jiang, L. Li, H. Yang, and Y. Liu, Effect of Ageing Treatment on the Transformation Behaviour of Ti-50.9 at.% Ni Alloy, Acta Mater., 2008, 56, p 736–745CrossRef

40.

T.B. Massalski, H. Okamoto, P.R. Subramanian, and L. Kacprzak, Binary Alloy Phase Diagram, Vol 3, 2nd ed., ASM International, Materials Park, Ohio, 1990, p 794–796

41.

F. Auricchio, D. Fugazza, and R. Desroches, Numerical and Experimental Evaluation of the Damping Properties of Shape-Memory Alloys, J. Eng. Mater. Technol., 2006, 128, p 312–319CrossRef

Titel: On the Influence of the Heat Treatment Temperature on the Superelastic Compressive Behavior of the Ni-Rich NiTi Shape Memory Alloy
verfasst von: B. Ben Fraj
A. Gahbiche
S. Zghal
Z. Tourki
Publikationsdatum: 27.09.2017
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 11/2017
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-017-2974-2

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11/2017

Mechanism of Texture and Precipitates Evolution in CGO Silicon Steel During High-Temperature Annealing Process

Correction to: Low-Velocity Impact Wear Behavior of Ball-to-Flat Contact Under Constant Kinetic Energy

Effect of Heat Treatment on Microstructure and Mechanical Properties of Laser Additively Manufactured AISI H13 Tool Steel

Effect of Microstructural Evolution on Sagging Behavior of Cold-Rolled Aluminum Foil During the Brazing Thermal Cycle

Electrodeposition Process and Performance of CuIn(Se x S1−x )2 Film for Absorption Layer of Thin-Film Solar Cells

Effects of Heat Treatment on Corrosion and Wear Behaviors of Mg-6Gd-2Zn-0.4Zr Alloy in Simulated Body Fluid

Premium Partner

Marktübersichten