Skip to main content

2021 | OriginalPaper | Buchkapitel

Optimization and Effect Analysis of Sustainable Micro Electrochemical Machining Using Organic Electrolyte

verfasst von : V. Subburam, S. Ramesh, Lidio Inacio Freitas

Erschienen in: Futuristic Trends in Intelligent Manufacturing

Verlag: Springer International Publishing

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Electrochemical Micromachining (EMM) is a non-conventional technique that has the potential to provide excellent accuracy due to its ionic dissolution nature. The technique is evolving rapidly with continuous research works and emerging as a frontline technology in the micro-fabrication domain. The dominant input factors of electrochemical machining (ECM) process become very sensitive at micro-domain and parametric optimization is inevitable for enhanced performance. New researches are required to enhance every aspect of the processing system that includes electric power, electrolyte, feed mechanism, gap control etc. The aim of the current work is to produce micro-holes on SS-304 sheet using tungsten tool and citric acid electrolyte through EMM process. An EMM device fabricated for experimentation purpose with pulse generator was utilized in this research. The operating factors preferred for study are voltage, current, pulse-on-time & electrolyte concentration. Taguchi’s L9 design for trials and Grey Relational Analysis (GRA) for multi response optimization were employed. The optimum set of parameters obtained through GRA included 12 V,1.2 A, 15 ms of pulse-on-time period and 20 g/l of solution concentration. The most influential factor observed was pulse-on-time. Though machining was slow with citric acid as electrolyte, holes produced were of good accuracy.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Bhattacharyya, B. (2015). Electrochemical micromachining for nanofabrication, MEMS and nanotechnology. UK: William Andrew Publications. Bhattacharyya, B. (2015). Electrochemical micromachining for nanofabrication, MEMS and nanotechnology. UK: William Andrew Publications.
2.
Zurück zum Zitat Mouliprasanth, B., & Hariharan, P. (2020). Scaling approach towards electrochemical micromachining: A method to evaluate similarity. The International Journal of Advanced Manufacturing Technology. (Springer-Verlag London Ltd., part of Springer Nature). https://doi.org/10.1007/s00170-020-05604-3. Mouliprasanth, B., & Hariharan, P. (2020). Scaling approach towards electrochemical micromachining: A method to evaluate similarity. The International Journal of Advanced Manufacturing Technology. (Springer-Verlag London Ltd., part of Springer Nature). https://​doi.​org/​10.​1007/​s00170-020-05604-3.
3.
Zurück zum Zitat Schuster, R., Kirchner, V., Allongue, P., & Ertl, G. (2000). Electrochemical micromachining. Science, 289, 98–101.CrossRef Schuster, R., Kirchner, V., Allongue, P., & Ertl, G. (2000). Electrochemical micromachining. Science, 289, 98–101.CrossRef
4.
Zurück zum Zitat Bhattacharya, B., Doloi, B., & Sridhar, P. S. (2001). Electrochemical micro-machining: New possibilities for micro-manufacturing. Journal of Materials Processing Technology, 113, 301–305.CrossRef Bhattacharya, B., Doloi, B., & Sridhar, P. S. (2001). Electrochemical micro-machining: New possibilities for micro-manufacturing. Journal of Materials Processing Technology, 113, 301–305.CrossRef
6.
Zurück zum Zitat Ghoshal, B., & Bhattacharyya, B. (2013). Influence of vibration on micro-tool fabrication by electrochemical machining. International Journal of Machine Tools and Manufacture, 64, 49–59.CrossRef Ghoshal, B., & Bhattacharyya, B. (2013). Influence of vibration on micro-tool fabrication by electrochemical machining. International Journal of Machine Tools and Manufacture, 64, 49–59.CrossRef
7.
Zurück zum Zitat Thanigaivelan, R., & Arunachalam, R. M. (2010). Experimental study on the influence of tool electrode tip shape on electrochemical micromachining of 304 Stainless steel. Materials and Manufacturing Processes, 25, 1181–1185. Thanigaivelan, R., & Arunachalam, R. M. (2010). Experimental study on the influence of tool electrode tip shape on electrochemical micromachining of 304 Stainless steel. Materials and Manufacturing Processes, 25, 1181–1185.
9.
Zurück zum Zitat Jain, V. K., Kalia, S., Sidpara, A., & Kulkarni, V. N. (2012). Fabrication of micro-features and micro-tools using electrochemical micromachining. The International Journal of Advanced Manufacturing Technology, 61(9–12), 1175–1183. Jain, V. K., Kalia, S., Sidpara, A., & Kulkarni, V. N. (2012). Fabrication of micro-features and micro-tools using electrochemical micromachining. The International Journal of Advanced Manufacturing Technology, 61(9–12), 1175–1183.
10.
Zurück zum Zitat Wang, Q., Xiao, J., & Li, Y. (2011). Experimental study on the through-mask electrochemical micromachining (EMM) Process. Advanced Materials Research, 189–193, 69–692. (Trans Tech Publications, Switzerland). Wang, Q., Xiao, J., & Li, Y. (2011). Experimental study on the through-mask electrochemical micromachining (EMM) Process. Advanced Materials Research, 189–193, 69–692. (Trans Tech Publications, Switzerland).
12.
Zurück zum Zitat Pooranachandran, K., Deepak, J., Hariharan, P. & Mouliprasanth, B. (2019). Effect of flushing on electrochemical micromachining of copper and inconel 718 alloy. Advances in Manufacturing Processes, Lecture Notes, in Mechanical Engineering. Springer Nature Singapore Pte Ltd. https://doi.org/10.1007/978-981-13-1724-8_6. Pooranachandran, K., Deepak, J., Hariharan, P. & Mouliprasanth, B. (2019). Effect of flushing on electrochemical micromachining of copper and inconel 718 alloy. Advances in Manufacturing Processes, Lecture Notes, in Mechanical Engineering. Springer Nature Singapore Pte Ltd. https://​doi.​org/​10.​1007/​978-981-13-1724-8_​6.
13.
Zurück zum Zitat Geethapriyan, T., Manoj Samson, R, Thavamani, J., Arun Raj, A. C., & Pulagam, B. R. (2019). Experimental investigation of electrochemical micro-machining process parameters on stainless steel 316 using sodium chloride electrolyte. Advances in Manufacturing Processes, Lecture Notes, in Mechanical Engineering. Springer Nature Singapore Pte Ltd. https://doi.org/10.1007/978-981-13-1724-8_6. Geethapriyan, T., Manoj Samson, R, Thavamani, J., Arun Raj, A. C., & Pulagam, B. R. (2019). Experimental investigation of electrochemical micro-machining process parameters on stainless steel 316 using sodium chloride electrolyte. Advances in Manufacturing Processes, Lecture Notes, in Mechanical Engineering. Springer Nature Singapore Pte Ltd. https://​doi.​org/​10.​1007/​978-981-13-1724-8_​6.
14.
Zurück zum Zitat Subburam, V., Ramesh, S., Mohan Kumar, P. N., & Srinivasan, A. (2018). Performance optimization of electrochemical micromachining of micro-holes on inconel 625 alloy. International Journal of Precision Technology, 8(1), 66–84.CrossRef Subburam, V., Ramesh, S., Mohan Kumar, P. N., & Srinivasan, A. (2018). Performance optimization of electrochemical micromachining of micro-holes on inconel 625 alloy. International Journal of Precision Technology, 8(1), 66–84.CrossRef
16.
Zurück zum Zitat Hackert-Oschatzchen, M., Lehnert, N., Martin, A., & Schubert, A. (2016). Jet-electrochemical machining of particle reinforced aluminum matrix composites with different neutral electrolytes. IOP Conference Series: Materials Science and Engineering, 118, 012036. Hackert-Oschatzchen, M., Lehnert, N., Martin, A., & Schubert, A. (2016). Jet-electrochemical machining of particle reinforced aluminum matrix composites with different neutral electrolytes. IOP Conference Series: Materials Science and Engineering, 118, 012036.
17.
Zurück zum Zitat Subburam, V., Ramesh, S., Arunachalam, R. M., & Thanigaivelan, R. (2013). Effect of acidified electrolyte on the performance of electrochemical micromachining, in Proceedings of the Second International Conference on Advances in Materials Processing and Characterisation (AMPC 2013), vol. II, pp. 799–806. Subburam, V., Ramesh, S., Arunachalam, R. M., & Thanigaivelan, R. (2013). Effect of acidified electrolyte on the performance of electrochemical micromachining, in Proceedings of the Second International Conference on Advances in Materials Processing and Characterisation (AMPC 2013), vol. II, pp. 799–806.
18.
Zurück zum Zitat Tang, L., & Yang, S. (2013). Experimental investigation on the electrochemical machining of 00Cr12Ni9Mo4Cu2 material and multi-objective parameters optimization. International Journal of Advanced Manufacturing Technology, 67, 2909–2916.CrossRef Tang, L., & Yang, S. (2013). Experimental investigation on the electrochemical machining of 00Cr12Ni9Mo4Cu2 material and multi-objective parameters optimization. International Journal of Advanced Manufacturing Technology, 67, 2909–2916.CrossRef
19.
Zurück zum Zitat Liu, J., Zhu, D., Zhao, L., & Xu, Z. (2015). Experimental investigation on electrochemical machining of γ-TiAl intermetallic, 15th machining innovations conference for aerospace industry. Procedia CIRP, 35, 20–24.CrossRef Liu, J., Zhu, D., Zhao, L., & Xu, Z. (2015). Experimental investigation on electrochemical machining of γ-TiAl intermetallic, 15th machining innovations conference for aerospace industry. Procedia CIRP, 35, 20–24.CrossRef
21.
Zurück zum Zitat Huaiqian, B., Jiawen, X., & Ying, L. (2008). Aviation-oriented micromachining technology—micro-ECM in pure water. Chinese Journal of Aeronautics, 21, 455–461. Huaiqian, B., Jiawen, X., & Ying, L. (2008). Aviation-oriented micromachining technology—micro-ECM in pure water. Chinese Journal of Aeronautics, 21, 455–461.
22.
Zurück zum Zitat Schulze, H. P., & Schatzing, W. (2013). Influences of different contaminations on the electro-erosive and the electrochemical micro-machining, The Seventeenth CIRP Conference on Electro Physical and Chemical Machining (ISEM), Procedia CIRP, vol. 6, pp. 58–63. Schulze, H. P., & Schatzing, W. (2013). Influences of different contaminations on the electro-erosive and the electrochemical micro-machining, The Seventeenth CIRP Conference on Electro Physical and Chemical Machining (ISEM), Procedia CIRP, vol. 6, pp. 58–63.
23.
Zurück zum Zitat Suresh, P., Venkatesan, R., Sekar, T., Elango, N., & Sathiyamoorthy, V. (2014). Optimization of intervening variables in micro EDM of SS316L using a genetic a algorithm and response-surface methodology, strojniski vestnik. Journal of Mechanical Engineering, 60(10), 656–664. https://doi.org/10.5545/sv-jme.2014.1665. Suresh, P., Venkatesan, R., Sekar, T., Elango, N., & Sathiyamoorthy, V. (2014). Optimization of intervening variables in micro EDM of SS316L using a genetic a algorithm and response-surface methodology, strojniski vestnik. Journal of Mechanical Engineering, 60(10), 656–664. https://​doi.​org/​10.​5545/​sv-jme.​2014.​1665.
25.
Zurück zum Zitat Sathiyamoorthy, V., Sekar, T., Suresh, P., Vijayan, R., & Elango, N. (2015). optimization of processing parameters in electrochemical machining of AISI 202 using response surface methodology. Journal of Engineering Science and Technology, 10(6), 780–789. Sathiyamoorthy, V., Sekar, T., Suresh, P., Vijayan, R., & Elango, N. (2015). optimization of processing parameters in electrochemical machining of AISI 202 using response surface methodology. Journal of Engineering Science and Technology, 10(6), 780–789.
26.
Zurück zum Zitat Krishnan, R., Duraisamy, S., Palanisamy, P., & Veeramani, A. (2018). Optimization of the machining parameters in the electrochemical micro-machining of nickel. Materials and technology, 52(3), 253–258. Krishnan, R., Duraisamy, S., Palanisamy, P., & Veeramani, A. (2018). Optimization of the machining parameters in the electrochemical micro-machining of nickel. Materials and technology, 52(3), 253–258.
28.
Zurück zum Zitat Leese, R., & Ivanov, A. (2018). Electrochemical micromachining: Review of factors affecting the process applicability in micro-manufacturing. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232(2) 195–207. (sagepub.co.uk/journalsPermissions.nav). https://doi.org/10.1177/0954405416640172. Leese, R., & Ivanov, A. (2018). Electrochemical micromachining: Review of factors affecting the process applicability in micro-manufacturing. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232(2) 195–207. (sagepub.co.uk/journalsPermissions.nav). https://​doi.​org/​10.​1177/​0954405416640172​.
29.
30.
Zurück zum Zitat Bhattacharyya, B., Munda, J., & Malapati, M. (2004). Advancement in electrochemical micro-machining. International Journal of Machine Tools and Manufacture, 44(15), 1577–1589. Bhattacharyya, B., Munda, J., & Malapati, M. (2004). Advancement in electrochemical micro-machining. International Journal of Machine Tools and Manufacture, 44(15), 1577–1589.
31.
Zurück zum Zitat Bilgi, D. S., Jain, V. K., Shekhar, R., et al. (2007). Hole quality and inter electrode gap dynamics during pulse current electrochemical deep hole drilling. The International Journal of Advanced Manufacturing Technology, 34(1–2), 79–95.CrossRef Bilgi, D. S., Jain, V. K., Shekhar, R., et al. (2007). Hole quality and inter electrode gap dynamics during pulse current electrochemical deep hole drilling. The International Journal of Advanced Manufacturing Technology, 34(1–2), 79–95.CrossRef
32.
Zurück zum Zitat Ayyappan, S., & Sivakumar, K. (2015). Investigation of electrochemical machining characteristics of 20MnCr5 alloy steel using potassium dichromate mixed aqueous NaCl electrolyte and optimization of process parameters. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229, 1984–1996.CrossRef Ayyappan, S., & Sivakumar, K. (2015). Investigation of electrochemical machining characteristics of 20MnCr5 alloy steel using potassium dichromate mixed aqueous NaCl electrolyte and optimization of process parameters. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229, 1984–1996.CrossRef
33.
Zurück zum Zitat Ghoshal, B., & Bhattacharyya, B. (2013). Micro electrochemical sinking and milling method for generation of micro features. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(11), 1651–1663.CrossRef Ghoshal, B., & Bhattacharyya, B. (2013). Micro electrochemical sinking and milling method for generation of micro features. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(11), 1651–1663.CrossRef
Metadaten
Titel
Optimization and Effect Analysis of Sustainable Micro Electrochemical Machining Using Organic Electrolyte
verfasst von
V. Subburam
S. Ramesh
Lidio Inacio Freitas
Copyright-Jahr
2021
DOI
https://doi.org/10.1007/978-3-030-70009-6_4

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.