nach oben

Erschienen in:

2022 | OriginalPaper | Buchkapitel

Optimization of PMEDM Parameters for Minimizing Electrode Wear Rate When Processing SKD11 Steel

verfasst von : Anh Tuan Nguyen, Thi Tam Do, Thu Quy Le, Quoc Cuong Dang, Kieu Tuan Trinh, Thanh Tu Nguyen, Ngoc Pi Vu, Xuan Tu Hoang

Erschienen in: Advances in Engineering Research and Application

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A study on optimization of powder-mixed electrical discharge machining (PMEDM) when machining cylindrical parts made of SKD11 steel to minimize the electrode wear rate has been introduced in this paper. In the study, an experiment was conducted in which the Taguchi method was used to design the experiment and analyze the results. Besides, six input factors containing the powder concentration, the powder size, the pulse on time, the pulse off time, the current, and the servo voltage were taken to study their effect on the tool wear rate. In addition, an optimal set of input factors to limit the tool wear rate has been proposed.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Optimization of Grinding Technology Parameters to Surface Roughness and Material Extracting Productivity of Turbine Shaft Parts

Nächstes Kapitel Monitoring and Evaluating the Fermentation Level of Black Tea Using the Random Forest Model

Hong, T.T., et al.: Effect of process parameters on machining time in PMEDM cylindrical shaped parts with silicon carbide powder suspended dielectric. Mater. Sci. Forum (2021)

Long, B.T., Phan, N.H., Cuong, N., Jatti, V.S.: Optimization of PMEDM process parameter for maximizing material removal rate by Taguchi’s method. Int. J. Adv. Manuf. Technol. 87(5–8), 1929–1939 (2016)CrossRef

Ahmad, S., et al.: Surface roughness and surface topography of Inconel 718 in powder mixed dielectric electrical discharge machining (PMEDM). Int. J. Integr. Eng. 10(5) (2018)

Das, A., Tharra, B., Siva Rao Sammeta, V.V.N., Barma, J.D.: Attribute of SiC powder additive mixed EDM on machining performance and surface integrity aspects of inconel 625. In: Pandey, K.M., Misra, R.D., Patowari, P.K., Dixit, U.S. (eds.) Recent Advances in Mechanical Engineering. LNME, pp. 869–879. Springer, Singapore (2021). https://doi.org/10.1007/978-981-15-7711-6_86CrossRef

Haque, R., et al.: Improvement of surface quality of Ti-6al-4v alloy by powder mixed electrical discharge machining using copper powder. In: Mechanical Engineering. Facta Universitatis (2021)

MangapathiRao, K., Vinaykumar, D., Chandra Shekar, K., Kumar, R.R.: Investigation and analysis of EDM process – a new approach with Al2O3 nano powder mixed in sunflower oil. IOP Conf. Ser. Mater. Sci. Eng. 1057(1), 012059 (2021)CrossRef

Hong, T., et al.: Multi-objective optimization of PMEDM process of 90CrSi alloy steel for minimum electrode wear rate and maximum material removal rate with silicon carbide powder. Mater. Sci. Forum 1018, 51–58 (2021)CrossRef

Huu-Phan, N., et al.: Multi-criteria decision making using preferential selection index in titanium based die-sinking PMEDM. J. Korean Soc. Precis. Eng. 36(9), 793–802 (2019)CrossRef

Padhee, S., et al.: Multi-objective parametric optimization of powder mixed electro-discharge machining using response surface methodology and non-dominated sorting genetic algorithm. Sadhana 37(2), 223–240 (2012)CrossRef

10.

Patel, S., Thesiya, D., Rajurkar, A.: Aluminium powder mixed rotary electric discharge machining (PMEDM) on Inconel 718. Aust. J. Mech. Eng. 16(1), 21–30 (2018)CrossRef

11.

Kung, K.-Y., Horng, J.-T., Chiang, K.-T.: Material removal rate and electrode wear ratio study on the powder mixed electrical discharge machining of cobalt-bonded tungsten carbide. Int. J. Adv. Manuf. Technol. 40(1–2), 95–104 (2009)CrossRef

12.

Boopathi, R., Sundaram, S.: Influence of process parameters for electrical discharge machine using nano particle and brass electrode. Int. J. Res. Advent Technol. 2(11), 45–49 (2014)

13.

Rouniyar, A.K., Shandilya, P.: Multi-Objective optimization using Taguchi and grey relational analysis on machining of Ti-6Al-4V alloy by powder mixed EDM process. Mater. Today Proc. 5(11), 23779–23788 (2018)CrossRef

14.

Le, Q.D., et al.: Effect of low-frequency vibrations on MRR, EWR and Ra in powder-mixed electrical discharge machining. Int. J. Modern Physics B 34(22n24), 2040153 (2020)CrossRef

15.

Bhaumik, M., Maity, K.: Multi-objective optimization of PMEDM using response surface methodology coupled with fuzzy based desirability function approach. Decis. Sci. Lett. 6(4), 387–394 (2017)CrossRef

16.

Kumar, S., et al.: Multi-objective parametric optimization using the Grey-Taguchi approach for powder mixed electric discharge machining of grade-II titanium alloy with cryogenically treated electrodes (2017)

17.

Talla, G., Gangopadhyay, S., Biswas, C.: Effect of powder-suspended dielectric on the EDM characteristics of Inconel 625. J. Mater. Eng. Perform. 25(2), 704–717 (2016)CrossRef

18.

Al-Khazraji, A., Amin, S.A., Ali, S.M.: The effect of SiC powder mixing electrical discharge machining on white layer thickness, heat flux and fatigue life of AISI D2 die steel. Eng. Sci. Technol. Int. J. 19(3), 1400–1415 (2016)

19.

Long, B.T., et al.: enhanced material removal rate and surface quality of H13 steel in electrical discharge machining with graphite electrode in rough machining. Int. J. Sci. Eng. Technol. 4(2), 104–109 (2015)

20.

Yaşar, H., Ekmekci, B.: Ti-6Al-4V surfaces in SiC powder mixed electrical discharge machining. Adv. Mater. Res. (2014)

Titel: Optimization of PMEDM Parameters for Minimizing Electrode Wear Rate When Processing SKD11 Steel
verfasst von: Anh Tuan Nguyen
Thi Tam Do
Thu Quy Le
Quoc Cuong Dang
Kieu Tuan Trinh
Thanh Tu Nguyen
Ngoc Pi Vu
Xuan Tu Hoang
Verlag: Springer International Publishing
Buch: Advances in Engineering Research and Application
Print ISBN: 978-3-030-92573-4

Electronic ISBN: 978-3-030-92574-1

Copyright-Jahr: 2022
DOI: https://doi.org/10.1007/978-3-030-92574-1_75

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht