International Journal on Interactive Design and Manufacturing (IJIDeM)

Erschienen in:

05.10.2023 | Original Paper

Optimization of TIG welding process parameters on chrome alloy steel using Box–Behnken method

verfasst von: Bhiksha Gugulothu, Srikanth Karumuri, S. Vijayakumar, B. Muthuvel, Suresh Seetharaman, S. Jeyakrishnan, Kuldeep K. Saxena

Erschienen in: International Journal on Interactive Design and Manufacturing (IJIDeM) | Ausgabe 9/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Der Artikel befasst sich mit der Optimierung der WIG-Schweißprozessparameter für Chromlegierungsstahl im Box-Behnken-Verfahren. Es zielt darauf ab, die mechanischen Eigenschaften von Schweißverbindungen zu verbessern, insbesondere die Zugfestigkeit (UTS) und die Brinell-Härtezahl (BHN). Die Studie konzentriert sich auf den Einfluss von Schweißstrom, Schweißgeschwindigkeit und Elektrodendurchmesser auf den Schweißprozess und die daraus resultierenden mechanischen Eigenschaften. Das Box-Behnken-Design wird zur Durchführung effizienter Experimente eingesetzt und die Ergebnisse werden mit statistischen Methoden wie ANOVA analysiert. Der Artikel enthält eine detaillierte Analyse der Wechselwirkung zwischen Schweißparametern und ihren Auswirkungen auf UTS und BHN. Darüber hinaus beinhaltet es mikrostrukturelle Analysen der Schweißverbindungen, um die Versagensmechanismen zu verstehen. Die Optimierungsergebnisse zeigen, dass die Box-Behnken-Methode die optimalen Schweißparameter effektiv identifizieren kann, um höhere UTS- und BHN-Werte zu erreichen. Der Artikel schließt mit praktischen Empfehlungen zur Verbesserung des Schweißprozesses und hebt das Potenzial der Box-Behnken-Methode zur Optimierung der WIG-Schweißparameter hervor.

KI-Generiert

Diese Zusammenfassung des Fachinhalts wurde mit Hilfe von KI generiert.

Vorheriger Artikel Optimization of process parameters for autogenous TIG welding of austenitic stainless-steel SS-304

Nächster Artikel Experimental and artificial neural network-based slurry erosion behavior evaluation of cast iron

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Balaram Naik, A., Chennakeshava Reddy, A.: Optimization of tensile strength in TIG welding using the Taguchi method and analysis of variance (ANOVA). Therm. Sci. Eng. Prog. 8, 327–339 (2018). https://doi.org/10.1016/j.tsep.2018.08.005CrossRef

Bodkhe, S.C., Dolas, D.R.: Optimization of activated tungsten inert gas welding of 304L austenitic stainless steel. Procedia Manuf. 20, 277–282 (2018). https://doi.org/10.1016/j.promfg.2018.02.041CrossRef

Chuaiphan, W., Srijaroenpramong, L.: Microstructure, mechanical properties and pitting corrosion of TIG weld joints alternative low-cost austenitic stainless steel grade 216. J. Adv. Join. Process. 2(100027), 100027 (2020). https://doi.org/10.1016/j.jajp.2020.100027CrossRef

Dadfar, M., Fathi, M.H., Karimzadeh, F., Dadfar, M.R., Saatchi, A.: Effect of TIG welding on corrosion behavior of 316L stainless steel. Mater. Lett. 61(11–12), 2343–2346 (2007). https://doi.org/10.1016/j.matlet.2006.09.008CrossRef

Kant, R., Dhami, S.S.: Multi-response optimization of parameters using GRA for abrasive water jet machining of EN31 steel. Mater. Today Proc. 47, 6141–6146 (2021). https://doi.org/10.1016/j.matpr.2021.05.053CrossRef

Kumar Sahu, A., Sivarajan, S., Padmanabhan, R.: Optimization of machining parameters in turning of EN31 steel with TiAlN coated cutting tool. Mater. Today Proc. 46, 7497–7501 (2021). https://doi.org/10.1016/j.matpr.2021.01.180CrossRef

Gugulothu, B., Satheesh Kumar, P.S., Srinivas, B., Ramakrishna, A., Vijayakumar, S.: Investigating the material removal rate parameters in ECM for Al 5086 alloy-reinforced silicon carbide/flyash hybrid composites by using Minitab-18. Adv. Mater. Sci. Eng. 2021, 1–6 (2021). https://doi.org/10.1155/2021/2079811CrossRef

Vijayakumar, S., Dhasarathan, N., Devabalan, P., Jehan, C.: Advancement and design of robotic manipulator control structures on cyber physical production system. J. Comput. Theor. Nanosci. 16(2), 659–663 (2019). https://doi.org/10.1166/jctn.2019.7786CrossRef

Venkata Ramana, M., Ravi Kumar, B.V.R., Krishna, M., Venkateshwar Rao, M., Kumar, V.S.: Optimization and influence of process parameters of dissimilar SS304L–SS430 joints produced by robotic TIG welding. Mater. Today Proc. 23, 479–482 (2020). https://doi.org/10.1016/j.matpr.2019.05.388CrossRef

10.

Paramasivam, P., Vijayakumar, S.: Mechanical characterization of aluminium alloy 6063 using destructive and non-destructive testing. Mater. Today Proc. 81, 965–968 (2023). https://doi.org/10.1016/j.matpr.2021.04.312CrossRef

11.

Anusha, P., Sri, M.N.S., Vijayakumar, S., Rao, T.V.J., Paramasivam, P., Jeyakrishnan, S., Saxena, K.K.: Design and optimization the wear characteristics for Al7178/TiO2/B4C/FA central hybrid composite. Int. J. Interact. Des. Manuf. (IJIDeM) (2023). https://doi.org/10.1007/s12008-023-01341-5CrossRef

12.

Gugulothu, B., Bharadwaja, K., Vijayakumar, S., Rao, T.V.J., Sri, M.N.S., Anusha, P., Agrawal, M.K.: Modeling and parametric optimization of electrical discharge machining on casted composite using central composite design. Int. J. Interact. Des. Manuf. (IJIDeM) (2023). https://doi.org/10.1007/s12008-023-01323-7CrossRef

13.

Rajput, S.K., Kumar, J., Mehta, Y., Soota, T., Saxena, K.K.: Microstructural evolution and mechanical properties of 316L stainless steel using multiaxial forging. Adv. Mater. Process. Technol. 6(3), 509–518 (2020). https://doi.org/10.1080/2374068x.2020.1728641CrossRef

14.

Pydi, H.P., Pasupulla, A.P., Vijayakumar, S., Agisho, H.A.: Study on microstructure, behavior and Al₂O3 content flux A-TIG weldment of SS-316L steel. Mater. Today Proc. 51, 728–734 (2022). https://doi.org/10.1016/j.matpr.2021.06.218CrossRef

15.

Samyal, R., Bagha, A.K., Bedi, R., Bahl, S., Saxena, K.K., Sehgal, S.: Predicting the effect of fiber orientations and boundary conditions on the optimal placement of PZT sensor on the composite structures. Mater. Res. Express 8(7), 075302 (2021). https://doi.org/10.1088/2053-1591/ac0de9CrossRef

16.

Wang, Y., Cong, B., Qi, B., Yang, M., Lin, S.: Process characteristics and properties of AA2219 aluminum alloy welded by double pulsed VPTIG welding. J. Mater. Process. Technol. 266, 255–263 (2019). https://doi.org/10.1016/j.jmatprotec.2018.11.015CrossRef

17.

Saxena, K.K., Pancholi, V., Jha, S.K., Chaudhari, G.P., Srivastava, D., Dey, G.K.: A novel approach to understand the deformation behavior in two phase region using processing map. J. Alloys Compd. 706, 511–519 (2017). https://doi.org/10.1016/j.jallcom.2017.02.177CrossRef

18.

Sankar, V.V.A., Suresh, P., Sridharan, P., Vignesh, R., Gowtham, M.: Mathematical and MATLAB based process optimization by simulated annealing algorithm for wire electrical discharge machining of EN31. Mater. Today Proc. 47, 6941–6946 (2021). https://doi.org/10.1016/j.matpr.2021.05.209CrossRef

19.

Vinoth, V., Sudalaimani, R., Veera Ajay, C., Suresh Kumar, C., Sanjeevi Prakash, K.: Optimization of mechanical behaviour of TIG welded 316 stainless steel using Taguchi based grey relational analysis method. Mater. Today Proc. 45, 7986–7993 (2021). https://doi.org/10.1016/j.matpr.2020.12.1002CrossRef

20.

Upadhyay, S., Saxena, K.K.: Effect of Cu and Mo addition on mechanical properties and microstructure of grey cast iron: an overview. Mater. Today Proc. 26, 2462–2470 (2020). https://doi.org/10.1016/j.matpr.2020.02.524CrossRef

21.

Bahl, S., Singh, T., Kumar, V., Sehgal, S., Bagha, A.K.: A systematic review on recent progress in advanced joining techniques of the lightweight materials. AIMS Mater. Sci. 8(1), 62–81 (2021)CrossRef

22.

Natrayan, L., Anand, R., Santhosh Kumar, S.: Optimization of process parameters in TIG welding of AISI 4140 stainless steel using Taguchi technique. Mater. Today Proc. 37, 1550–1553 (2021). https://doi.org/10.1016/j.matpr.2020.07.150CrossRef

23.

Sharma, A., Sehgal, S., Goyal, D.: Effects of process parameters in joining of Inconel-625 alloy through microwave hybrid heating. Mater. Today Proc. 28, 1323–1327 (2020). https://doi.org/10.1016/j.matpr.2020.04.590CrossRef

24.

Sekhon, S.S., Kumar, H., Sehgal, S.: Effect of tool pin profile on performance of friction stir welding of brass-copper-based butt welded joint. Int. J. Mater. Eng. Innov. 7(3/4), 236 (2016). https://doi.org/10.1504/ijmatei.2016.084627CrossRef

25.

Shanmugasundar, G., Karthikeyan, B., Ponvell, P.S., Vignesh, V.: Optimization of process parameters in TIG welded joints of AISI 304L -austenitic stainless steel using Taguchi’s experimental design method. Mater. Today Proc. 16, 1188–1195 (2019). https://doi.org/10.1016/j.matpr.2019.05.213CrossRef

26.

Wan, Z., Meng, D., Zhao, Y., Zhang, D., Wang, Q., Shan, J., Song, J., Wang, G., Wu, A.: Improvement on the tensile properties of 2219-T8 aluminum alloy TIG welding joint with weld geometry optimization. J. Manuf. Process. 67, 275–285 (2021). https://doi.org/10.1016/j.jmapro.2021.04.062CrossRef

27.

Kumar, P.S.S., Allamraju, K.V.: A review of natural fiber composites [jute, sisal, Kenaf]. Mater. Today Proc. 18, 2556–2562 (2019). https://doi.org/10.1016/j.matpr.2019.07.113CrossRef

28.

Budarapu, P.R., Sastry, S., Natarajan, R.: Design concepts of an aircraft wing: composite and morphing airfoil with auxetic structures. Front. Struct. Civ. Eng. 10(4), 394–408 (2016). https://doi.org/10.1007/s11709-016-0352-zCrossRef

29.

Budarapu, P.R., Yb, S.S., Javvaji, B., Mahapatra, D.R.: Vibration analysis of multi-walled carbon nanotubes embedded in elastic medium. Front. Struct. Civ. Eng. 8(2), 151–159 (2014). https://doi.org/10.1007/s11709-014-0247-9CrossRef

30.

Jaffery, H.A., Sabri, M.F.M., Said, S.M., Hasan, S.W., Sajid, I.H., Nordin, N.I.M., Megat Hasnan, M.M.I., Shnawah, D.A., Moorthy, C.V.: Electrochemical corrosion behavior of Sn–0.7Cu solder alloy with the addition of bismuth and iron. J. Alloys Compd. 810(151925), 151925 (2019). https://doi.org/10.1016/j.jallcom.2019.151925CrossRef

31.

Guoqing, W., Quan, Li., Yanjun, Li., et al.: Effects of weld reinforcement on tensile behavior and mechanical properties of 2219-T87 aluminum alloy TIG welded joints. Trans. Nonferrous Metals Soc. China 27(1), 10–16 (2017)CrossRef

32.

Vijayakumar, S., Arunkumar, A., Pradeep, A., Satishkumar, P., Singh, B., Rama Raju, K.S., Sharma, V.K.: Optimization of process variables for shielded metal arc welding dissimilar mild steel and medium carbon steel joints. J. Adhes. Sci. Technol. (2023). https://doi.org/10.1080/01694243.2023.2227461CrossRef

33.

Dhawan, A., Gupta, N., Goyal, R., Saxena, K.K.: Evaluation of mechanical properties of concrete manufactured with fly ash, bagasse ash and banana fibre. Mater. Today Proc. 44, 17–22 (2021). https://doi.org/10.1016/j.matpr.2020.06.006CrossRef

34.

Gupta, N., Gupta, A., Saxena, K.K., Shukla, A., Goyal, S.K.: Mechanical and durability properties of geopolymer concrete composite at varying superplasticizer dosage. Mater. Today Proc. 44, 12–16 (2021). https://doi.org/10.1016/j.matpr.2020.05.646CrossRef

35.

Kumar, N., Bharti, A., Saxena, K.K.: A re-investigation: effect of powder metallurgy parameters on the physical and mechanical properties of aluminium matrix composites. Mater. Today Proc. 44, 2188–2193 (2021). https://doi.org/10.1016/j.matpr.2020.12.351CrossRef

36.

Grayeli Korpi, A., Ţălu, Ş, Bramowicz, M., Arman, A., Kulesza, S., Pszczolkowski, B., Jurečka, S., Mardani, M., Luna, C., Balashabadi, P., Rezaee, S., Gopikishan, S.: Minkowski functional characterization and fractal analysis of surfaces of titanium nitride films. Mater. Res. Express 6(8), 086463 (2019). https://doi.org/10.1088/2053-1591/ab26beCrossRef

37.

Yadav, S., Sharma, P., Yamasani, P., Minaev, S., Kumar, S.: A prototype micro-thermoelectric power generator for micro-electromechanical systems. Appl. Phys. Lett. (2014). https://doi.org/10.1063/1.4870260CrossRef

38.

Gupta, T.K., Budarapu, P.R., Chappidi, S.R., Sastry, S., Paggi, M., Bordas, S.P.: Advances in carbon based nanomaterials for bio-medical applications. Curr. Med. Chem. 26(38), 6851–6877 (2019). https://doi.org/10.2174/0929867326666181126113605CrossRef

39.

Krishnaja, D., Cheepu, M., Venkateswarlu, D.: A review of research progress on dissimilar laser weld-brazing of automotive applications. IOP Conf. Ser. Mater. Sci. Eng. 330, 012073 (2018). https://doi.org/10.1088/1757-899x/330/1/012073CrossRef

40.

Balguri, P.K., Samuel, D.G.H., Thumu, U.: A review on mechanical properties of epoxy nanocomposites. Mater. Today Proc. 44, 346–355 (2021). https://doi.org/10.1016/j.matpr.2020.09.742CrossRef

41.

SudhirSastry, Y.B., Krishna, Y., Budarapu, P.R.: Parametric studies on buckling of thin walled channel beams. Comput. Mater. Sci. 96, 416–424 (2015). https://doi.org/10.1016/j.commatsci.2014.07.058CrossRef

42.

Manickam, S., Pradeep, A., Vijayakumar, S., Mosisa, E.: Optimization of arc welding process parameters for joining dissimilar metals. Mater. Today Proc. (2022). https://doi.org/10.1016/j.matpr.2022.06.548CrossRef

43.

Pradeep, A., Kavitha, N., Janardhana Rao, T.V., Vijayakumar, S.: Influence of nano alumina/vegetable oil based cutting fluid on MQL turning of stainless steel 304. Mater. Today Proc. (2022). https://doi.org/10.1016/j.matpr.2022.06.547CrossRef

44.

Vijayakumar, S., Anitha, S., Arivazhagan, R., Hailu, A.D., Rao, T.V.J., Pydi, H.P.: Wear investigation of aluminum alloy surface layers fabricated through friction stir welding method. Adv. Mater. Sci. Eng. 2022, 1–8 (2022). https://doi.org/10.1155/2022/4120145CrossRef

45.

Vijayakumar, S., Manickam, S., Seetharaman, S., Rao, T.V.J., Pounraj, D., Pydi, H.P.: Examination of friction stir-welded AA 6262/5456 joints through the optimization technique. Adv. Mater. Sci. Eng. 2022, 1–11 (2022). https://doi.org/10.1155/2022/4527595CrossRef

46.

Zhang, X., Yao, F., Ren, Z., Yu, H.: Effect of welding current on weld formation, microstructure, and mechanical properties in resistance spot welding of CR590T/340Y galvanized dual phase steel. Materials 11(11), 2310 (2018). https://doi.org/10.3390/ma11112310CrossRef

Titel: Optimization of TIG welding process parameters on chrome alloy steel using Box–Behnken method
verfasst von: Bhiksha Gugulothu
Srikanth Karumuri
S. Vijayakumar
B. Muthuvel
Suresh Seetharaman
S. Jeyakrishnan
Kuldeep K. Saxena
Publikationsdatum: 05.10.2023
Verlag: Springer Paris
Erschienen in: International Journal on Interactive Design and Manufacturing (IJIDeM) / Ausgabe 9/2024
Print ISSN: 1955-2513
Elektronische ISSN: 1955-2505
DOI: https://doi.org/10.1007/s12008-023-01531-1

Comparative analysis of the behavior of Bi-Directional Functionally Graded Beams: Numerical and Parametric study

Original Paper

Computational modeling of an exponential functionally graded material (EFGM) beam

Original Paper

Numerical investigation of forces and acceleration for air-sea unmanned aerial vehicle in transition

Original Paper

Optimization of mechanical properties of bamboo fiber reinforced epoxy hybrid nano composites by response surface methodology

Open Access
Original Paper

Implementation of Box–Behnken design to study the factors interaction impacts and modelling of the surface roughness of AL 6063 alloys during turning operations

Original Paper

Correction: Thermal simulation of Al alloy developed by wire arc additive manufacturing using finite element analysis

Correction

Premium Partner

Bildnachweise

Rittal/© Rittal, NTT Data/© NTT Data, Wildix/© Wildix, Ceyoniq Technology GmbH/© Ceyoniq Technology GmbH, arvato Systems GmbH/© arvato Systems GmbH, Ninox Software GmbH/© Ninox Software GmbH, Everyday Software S.L./© Everyday Software S.L., Redgate/© Redgate, CELONIS Labs GmbH, DC-Datacenter-Group GmbH/© DC-Datacenter-Group GmbH, all for one/© all for one, G Data CyberDefense/© G Data CyberDefense, FAST LTA/© FAST LTA, Vendosoft/© Vendosoft, Kumavision/© Kumavision, Noriis Network AG/© Noriis Network AG, WSW Software GmbH/© WSW Software GmbH, tts GmbH/© tts GmbH

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Comparative analysis of the behavior of Bi-Directional Functionally Graded Beams: Numerical and Parametric study

Computational modeling of an exponential functionally graded material (EFGM) beam

Numerical investigation of forces and acceleration for air-sea unmanned aerial vehicle in transition

Optimization of mechanical properties of bamboo fiber reinforced epoxy hybrid nano composites by response surface methodology

Implementation of Box–Behnken design to study the factors interaction impacts and modelling of the surface roughness of AL 6063 alloys during turning operations

Correction: Thermal simulation of Al alloy developed by wire arc additive manufacturing using finite element analysis