Skip to main content
Erschienen in: The International Journal of Advanced Manufacturing Technology 9-12/2019

10.05.2019 | ORIGINAL ARTICLE

Orthogonal cutting mechanisms of CFRP/Ti6Al4V stacks

verfasst von: Jinyang Xu, Mohamed El Mansori, Ming Chen, Fei Ren

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 9-12/2019

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The enhanced mechanical/physical properties and improved functionalities have made the carbon fiber–reinforced polymer/titanium alloy (CFRP/Ti6Al4V) stacks very attractive to the modern aerospace industry. However, the current knowledge of machining CFRP/Ti6Al4V stacks remains insufficient to guide their industrial applications. The main contribution of the present paper lies in the scientific understanding of the coupling effects and underlying mechanisms dominating the stack chip formation and cutting response transfer via the orthogonal cutting method. A particular focus was placed on the identification of the impact of different cutting sequence strategies (i.e., cutting from CFRP to Ti6Al4V and from Ti6Al4V to CFRP) on the stack machinability. The orthogonal cutting tests were carefully performed on a shaper machine tool using the polycrystalline diamond (PCD)–tipped inserts. The present study covers a variety of aspects in the CFRP/Ti6Al4V machining including the chip removal process, cutting forces, chip features, bouncing-back phenomenon and machined surface quality. The results discussed in this work allow for a better cutting understanding of CFRP/Ti6Al4V stacks and could advance the state of knowledge of the subject area.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat SenthilKumar M, Prabukarthi A, Krishnaraj V (2013) Study on tool wear and chip formation during drilling carbon fiber reinforced polymer (CFRP)/titanium alloy (Ti6Al4V) stacks. Procedia Eng 64:582–592CrossRef SenthilKumar M, Prabukarthi A, Krishnaraj V (2013) Study on tool wear and chip formation during drilling carbon fiber reinforced polymer (CFRP)/titanium alloy (Ti6Al4V) stacks. Procedia Eng 64:582–592CrossRef
2.
Zurück zum Zitat Pecat O, Brinksmeier E (2014) Tool wear analyses in low frequency vibration assisted drilling of CFRP/Ti6Al4V stack material. Procedia CIRP 14:142–147CrossRef Pecat O, Brinksmeier E (2014) Tool wear analyses in low frequency vibration assisted drilling of CFRP/Ti6Al4V stack material. Procedia CIRP 14:142–147CrossRef
3.
Zurück zum Zitat Xu J, El Mansori M (2017) Wear characteristics of polycrystalline diamond tools in orthogonal cutting of CFRP/Ti stacks. Wear 376-377:91–106CrossRef Xu J, El Mansori M (2017) Wear characteristics of polycrystalline diamond tools in orthogonal cutting of CFRP/Ti stacks. Wear 376-377:91–106CrossRef
4.
Zurück zum Zitat Xu J, Mkaddem A, El Mansori M (2016) Recent advances in drilling hybrid FRP/Ti composite: a state-of-the-art review. Compos Struct 135:316–338CrossRef Xu J, Mkaddem A, El Mansori M (2016) Recent advances in drilling hybrid FRP/Ti composite: a state-of-the-art review. Compos Struct 135:316–338CrossRef
5.
Zurück zum Zitat Tsao CC (2008) Experimental study of drilling composite materials with step-core drill. Mater Des 29(9):1740–1744CrossRef Tsao CC (2008) Experimental study of drilling composite materials with step-core drill. Mater Des 29(9):1740–1744CrossRef
6.
Zurück zum Zitat Sorrentino L, Turchetta S, Bellini C (2017) In process monitoring of cutting temperature during the drilling of FRP laminate. Compos Struct 168:549–561CrossRef Sorrentino L, Turchetta S, Bellini C (2017) In process monitoring of cutting temperature during the drilling of FRP laminate. Compos Struct 168:549–561CrossRef
7.
Zurück zum Zitat Sorrentino L, Turchetta S, Bellini C (2018) A new method to reduce delaminations during drilling of FRP laminates by feed rate control. Compos Struct 186:154–164CrossRef Sorrentino L, Turchetta S, Bellini C (2018) A new method to reduce delaminations during drilling of FRP laminates by feed rate control. Compos Struct 186:154–164CrossRef
8.
Zurück zum Zitat Abhishek K, Datta S, Mahapatra SS (2014) Optimization of thrust, torque, entry, and exist delamination factor during drilling of CFRP composites. Int J Adv Manuf Technol 76(1–4):401–416 Abhishek K, Datta S, Mahapatra SS (2014) Optimization of thrust, torque, entry, and exist delamination factor during drilling of CFRP composites. Int J Adv Manuf Technol 76(1–4):401–416
9.
Zurück zum Zitat Tsao CC, Kuo KL, Hsu IC (2012) Evaluation of a novel approach to a delamination factor after drilling composite laminates using a core–saw drill. Int J Adv Manuf Technol 59(5):617–622CrossRef Tsao CC, Kuo KL, Hsu IC (2012) Evaluation of a novel approach to a delamination factor after drilling composite laminates using a core–saw drill. Int J Adv Manuf Technol 59(5):617–622CrossRef
10.
Zurück zum Zitat Ramulu M, Branson T, Kim D (2001) A study on the drilling of composite and titanium stacks. Compos Struct 54(1):67–77CrossRef Ramulu M, Branson T, Kim D (2001) A study on the drilling of composite and titanium stacks. Compos Struct 54(1):67–77CrossRef
11.
Zurück zum Zitat Brinksmeier E, Janssen R (2002) Drilling of multi-layer composite materials consisting of carbon fiber reinforced plastics (CFRP), titanium and aluminum alloys. CIRP Ann Manuf Technol 51(1):87–90CrossRef Brinksmeier E, Janssen R (2002) Drilling of multi-layer composite materials consisting of carbon fiber reinforced plastics (CFRP), titanium and aluminum alloys. CIRP Ann Manuf Technol 51(1):87–90CrossRef
12.
Zurück zum Zitat Krishnaraj V, Zitoune R, Collombet F (2010) Comprehensive review on drilling of multimaterials stacks. J Mach Form Technol 2(3–4):1–32 Krishnaraj V, Zitoune R, Collombet F (2010) Comprehensive review on drilling of multimaterials stacks. J Mach Form Technol 2(3–4):1–32
13.
Zurück zum Zitat Park KH, Beal A, Kim D, Kwon P, Lantrip J (2011) Tool wear in drilling of composite/titanium stacks using carbide and polycrystalline diamond tools. Wear 271(11–12):2826–2835CrossRef Park KH, Beal A, Kim D, Kwon P, Lantrip J (2011) Tool wear in drilling of composite/titanium stacks using carbide and polycrystalline diamond tools. Wear 271(11–12):2826–2835CrossRef
14.
Zurück zum Zitat Tashiro T, Fujiwara J, Inada K (2011) Drilling of CFRP/Ti-6Al-4V stacks. Adv Mater Res 325:369–374CrossRef Tashiro T, Fujiwara J, Inada K (2011) Drilling of CFRP/Ti-6Al-4V stacks. Adv Mater Res 325:369–374CrossRef
15.
Zurück zum Zitat Isbilir O, Ghassemieh E (2013) Comparative study of tool life and hole quality in drilling of CFRP/titanium stack using coated carbide drill. Mach Sci Technol 17(3):380–409CrossRef Isbilir O, Ghassemieh E (2013) Comparative study of tool life and hole quality in drilling of CFRP/titanium stack using coated carbide drill. Mach Sci Technol 17(3):380–409CrossRef
16.
Zurück zum Zitat Wang X, Kwon PY, Sturtevant C, Kim D, Lantrip J (2014) Comparative tool wear study based on drilling experiments on CFRP/Ti stack and its individual layers. Wear 317(1–2):265–276CrossRef Wang X, Kwon PY, Sturtevant C, Kim D, Lantrip J (2014) Comparative tool wear study based on drilling experiments on CFRP/Ti stack and its individual layers. Wear 317(1–2):265–276CrossRef
17.
Zurück zum Zitat Sanda A, Arriola I, Navas VG, Bengoetxea I, Gonzalo O (2016) Ultrasonically assisted drilling of carbon fibre reinforced plastics and Ti6Al4V. J Manuf Process 22:169–176CrossRef Sanda A, Arriola I, Navas VG, Bengoetxea I, Gonzalo O (2016) Ultrasonically assisted drilling of carbon fibre reinforced plastics and Ti6Al4V. J Manuf Process 22:169–176CrossRef
18.
Zurück zum Zitat Zhang L, Liu Z, Tian W, Liao W (2015) Experimental studies on the performance of different structure tools in drilling CFRP/Al alloy stacks. Int J Adv Manuf Technol 81(1–4):241–251CrossRef Zhang L, Liu Z, Tian W, Liao W (2015) Experimental studies on the performance of different structure tools in drilling CFRP/Al alloy stacks. Int J Adv Manuf Technol 81(1–4):241–251CrossRef
19.
Zurück zum Zitat Alberdi A, Artaza T, Suárez A, Rivero A, Girot F (2015) An experimental study on abrasive waterjet cutting of CFRP/Ti6Al4V stacks for drilling operations. Int J Adv Manuf Technol: 1–14 Alberdi A, Artaza T, Suárez A, Rivero A, Girot F (2015) An experimental study on abrasive waterjet cutting of CFRP/Ti6Al4V stacks for drilling operations. Int J Adv Manuf Technol: 1–14
20.
Zurück zum Zitat Wang H, Qin X, Li H, Tan Y (2016) A comparative study on helical milling of CFRP/Ti stacks and its individual layers. Int J Adv Manuf Technol 86(5):1973–1983CrossRef Wang H, Qin X, Li H, Tan Y (2016) A comparative study on helical milling of CFRP/Ti stacks and its individual layers. Int J Adv Manuf Technol 86(5):1973–1983CrossRef
21.
Zurück zum Zitat Xu J, El Mansori M (2016) Experimental study on drilling mechanisms and strategies of hybrid CFRP/Ti stacks. Compos Struct 157:461–482CrossRef Xu J, El Mansori M (2016) Experimental study on drilling mechanisms and strategies of hybrid CFRP/Ti stacks. Compos Struct 157:461–482CrossRef
22.
Zurück zum Zitat Koplev A, Lystrup A, Vorm T (1983) The cutting process, chips, and cutting forces in machining CFRP. Compos 14(4):371–376CrossRef Koplev A, Lystrup A, Vorm T (1983) The cutting process, chips, and cutting forces in machining CFRP. Compos 14(4):371–376CrossRef
23.
Zurück zum Zitat Wang DH, Ramulu M, Arola D (1995) Orthogonal cutting mechanisms of graphite/epoxy composite. Part I: unidirectional laminate. Int J Mach Tools Manuf 35(12):1623–1638CrossRef Wang DH, Ramulu M, Arola D (1995) Orthogonal cutting mechanisms of graphite/epoxy composite. Part I: unidirectional laminate. Int J Mach Tools Manuf 35(12):1623–1638CrossRef
24.
Zurück zum Zitat Arola D, Ramulu M, Wang DH (1996) Chip formation in orthogonal trimming of graphite/epoxy composite. Compos Pt A - Appl Sci Manuf 27(2):121–133CrossRef Arola D, Ramulu M, Wang DH (1996) Chip formation in orthogonal trimming of graphite/epoxy composite. Compos Pt A - Appl Sci Manuf 27(2):121–133CrossRef
25.
Zurück zum Zitat Pwu H, Hocheng H (1998) Chip formation model of cutting fiber-reinforced plastics perpendicular to fiber axis. J Manuf Sci Eng-Trans ASME 120(1):192–196CrossRef Pwu H, Hocheng H (1998) Chip formation model of cutting fiber-reinforced plastics perpendicular to fiber axis. J Manuf Sci Eng-Trans ASME 120(1):192–196CrossRef
26.
Zurück zum Zitat Wang XM, Zhang LC (2003) An experimental investigation into the orthogonal cutting of unidirectional fibre reinforced plastics. Int J Mach Tools Manuf 43(10):1015–1022CrossRef Wang XM, Zhang LC (2003) An experimental investigation into the orthogonal cutting of unidirectional fibre reinforced plastics. Int J Mach Tools Manuf 43(10):1015–1022CrossRef
27.
Zurück zum Zitat Brinksmeier E, Fangmann S, Rentsch R (2011) Drilling of composites and resulting surface integrity. CIRP Ann Manuf Technol 60(1):57–60CrossRef Brinksmeier E, Fangmann S, Rentsch R (2011) Drilling of composites and resulting surface integrity. CIRP Ann Manuf Technol 60(1):57–60CrossRef
28.
Zurück zum Zitat Arola D, Ramulu M (1997) Orthogonal cutting of fiber-reinforced composites: a finite element analysis. Int J Mech Sci 39(5):597–613CrossRefMATH Arola D, Ramulu M (1997) Orthogonal cutting of fiber-reinforced composites: a finite element analysis. Int J Mech Sci 39(5):597–613CrossRefMATH
29.
Zurück zum Zitat Arola D, Sultan MB, Ramulu M (2002) Finite element modeling of edge trimming fiber reinforced plastics. J Manuf Sci Eng-Trans ASME 124(1):32–41CrossRef Arola D, Sultan MB, Ramulu M (2002) Finite element modeling of edge trimming fiber reinforced plastics. J Manuf Sci Eng-Trans ASME 124(1):32–41CrossRef
30.
Zurück zum Zitat Nayak D, Bhatnagar N, Mahajan P (2005) Machining studies of UD-FRP composites part 2: finite element analysis. Mach Sci Technol 9(4):503–528CrossRef Nayak D, Bhatnagar N, Mahajan P (2005) Machining studies of UD-FRP composites part 2: finite element analysis. Mach Sci Technol 9(4):503–528CrossRef
31.
Zurück zum Zitat Venu Gopala Rao G, Mahajan P, Bhatnagar N (2007) Micro-mechanical modeling of machining of FRP composites - cutting force analysis. Compos Sci Technol 67(3–4):579–593 Venu Gopala Rao G, Mahajan P, Bhatnagar N (2007) Micro-mechanical modeling of machining of FRP composites - cutting force analysis. Compos Sci Technol 67(3–4):579–593
32.
Zurück zum Zitat Lasri L, Nouari M, El Mansori M (2009) Modelling of chip separation in machining unidirectional FRP composites by stiffness degradation concept. Compos Sci Technol 69(5):684–692CrossRef Lasri L, Nouari M, El Mansori M (2009) Modelling of chip separation in machining unidirectional FRP composites by stiffness degradation concept. Compos Sci Technol 69(5):684–692CrossRef
33.
Zurück zum Zitat Iliescu D, Gehin D, Iordanoff I, Girot F, Gutiérrez ME (2010) A discrete element method for the simulation of CFRP cutting. Compos Sci Technol 70(1):73–80CrossRef Iliescu D, Gehin D, Iordanoff I, Girot F, Gutiérrez ME (2010) A discrete element method for the simulation of CFRP cutting. Compos Sci Technol 70(1):73–80CrossRef
34.
Zurück zum Zitat Calamaz M, Coupard D, Girot F (2008) A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti-6Al-4V. Int J Mach Tools Manuf 48(3–4):275–288CrossRef Calamaz M, Coupard D, Girot F (2008) A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti-6Al-4V. Int J Mach Tools Manuf 48(3–4):275–288CrossRef
35.
Zurück zum Zitat Nurul Amin AKM, Ismail AF, Nor Khairusshima MK (2007) Effectiveness of uncoated WC-Co and PCD inserts in end milling of titanium alloy—Ti-6Al-4V. J Mater Process Technol 192:147–158CrossRef Nurul Amin AKM, Ismail AF, Nor Khairusshima MK (2007) Effectiveness of uncoated WC-Co and PCD inserts in end milling of titanium alloy—Ti-6Al-4V. J Mater Process Technol 192:147–158CrossRef
36.
Zurück zum Zitat Komanduri R, Von Turkovich BF (1981) New observations on the mechanism of chip formation when machining titanium alloys. Wear 69(2):179–188CrossRef Komanduri R, Von Turkovich BF (1981) New observations on the mechanism of chip formation when machining titanium alloys. Wear 69(2):179–188CrossRef
37.
Zurück zum Zitat Komanduri R, Hou ZB (2002) On thermoplastic shear instability in the machining of a titanium alloy (Ti-6Al-4V). Metall Mater Trans A 33(9):2995–3010CrossRef Komanduri R, Hou ZB (2002) On thermoplastic shear instability in the machining of a titanium alloy (Ti-6Al-4V). Metall Mater Trans A 33(9):2995–3010CrossRef
38.
Zurück zum Zitat Molinari A, Musquar C, Sutter G (2002) Adiabatic shear banding in high speed machining of Ti-6Al-4V: experiments and modeling. Int J Plasticity 18(4):443–459 Molinari A, Musquar C, Sutter G (2002) Adiabatic shear banding in high speed machining of Ti-6Al-4V: experiments and modeling. Int J Plasticity 18(4):443–459
39.
Zurück zum Zitat Vyas A, Shaw MC (1999) Mechanics of saw-tooth chip formation in metal cutting. J Manuf Sci Eng-Trans ASME 121(2):163–172CrossRef Vyas A, Shaw MC (1999) Mechanics of saw-tooth chip formation in metal cutting. J Manuf Sci Eng-Trans ASME 121(2):163–172CrossRef
40.
Zurück zum Zitat Hua J, Shivpuri R (2004) Prediction of chip morphology and segmentation during the machining of titanium alloys. J Mater Process Technol 150(1–2):124–133CrossRef Hua J, Shivpuri R (2004) Prediction of chip morphology and segmentation during the machining of titanium alloys. J Mater Process Technol 150(1–2):124–133CrossRef
41.
Zurück zum Zitat Poutord A, Rossi F, Poulachon G, M'Saoubi R, Abrivard G (2013) Local approach of wear in drilling Ti6Al4V/CFRP for stack modelling. Procedia CIRP 8:316–321CrossRef Poutord A, Rossi F, Poulachon G, M'Saoubi R, Abrivard G (2013) Local approach of wear in drilling Ti6Al4V/CFRP for stack modelling. Procedia CIRP 8:316–321CrossRef
42.
Zurück zum Zitat Xu J, El Mansori M, Voisin J (2016) Numerical modeling and FE analysis of CFRP/Ti stack orthogonal cutting. Procedia CIRP 46(1):67–70CrossRef Xu J, El Mansori M, Voisin J (2016) Numerical modeling and FE analysis of CFRP/Ti stack orthogonal cutting. Procedia CIRP 46(1):67–70CrossRef
43.
Zurück zum Zitat Xu J, El Mansori M (2016) Numerical modeling of stacked composite CFRP/Ti machining under different cutting sequence strategies. Int J Precis Eng Manuf 17(1):99–107CrossRef Xu J, El Mansori M (2016) Numerical modeling of stacked composite CFRP/Ti machining under different cutting sequence strategies. Int J Precis Eng Manuf 17(1):99–107CrossRef
44.
Zurück zum Zitat Xu J, El Mansori M (2016) Numerical studies of frictional responses when cutting hybrid CFRP/Ti composite. Int J Adv Manuf Technol 87(1):657–675CrossRef Xu J, El Mansori M (2016) Numerical studies of frictional responses when cutting hybrid CFRP/Ti composite. Int J Adv Manuf Technol 87(1):657–675CrossRef
45.
Zurück zum Zitat Xu J, El Mansori M (2016) Experimental studies on the cutting characteristics of hybrid CFRP/Ti stacks. Procedia Manuf 5:270–281CrossRef Xu J, El Mansori M (2016) Experimental studies on the cutting characteristics of hybrid CFRP/Ti stacks. Procedia Manuf 5:270–281CrossRef
46.
Zurück zum Zitat Xu J, El Mansori M (2016) An experimental investigation on orthogonal cutting of hybrid CFRP/Ti stacks. AIP Conference Proceedings 1769(1):080002CrossRef Xu J, El Mansori M (2016) An experimental investigation on orthogonal cutting of hybrid CFRP/Ti stacks. AIP Conference Proceedings 1769(1):080002CrossRef
47.
Zurück zum Zitat Shaw MC (2005) Metal cutting principles. 2nd edn. Oxford University Press, New York Shaw MC (2005) Metal cutting principles. 2nd edn. Oxford University Press, New York
48.
Zurück zum Zitat Cotterell M, Byrne G (2008) Dynamics of chip formation during orthogonal cutting of titanium alloy Ti-6Al-4V. CIRP Ann Manuf Technol 57(1):93–96CrossRef Cotterell M, Byrne G (2008) Dynamics of chip formation during orthogonal cutting of titanium alloy Ti-6Al-4V. CIRP Ann Manuf Technol 57(1):93–96CrossRef
49.
Zurück zum Zitat Yousuff CM, Danish M, Ho ETW, Kamal Basha IH, Hamid NHB (2017) Study on the optimum cutting parameters of an aluminum mold for effective bonding strength of a PDMS microfluidic device. Micromachines 8(8):258CrossRef Yousuff CM, Danish M, Ho ETW, Kamal Basha IH, Hamid NHB (2017) Study on the optimum cutting parameters of an aluminum mold for effective bonding strength of a PDMS microfluidic device. Micromachines 8(8):258CrossRef
50.
Zurück zum Zitat Danish M, Ginta TL, Habib K, Carou D, Rani AMA, Saha BB (2017) Thermal analysis during turning of AZ31 magnesium alloy under dry and cryogenic conditions. Int J Adv Manuf Technol 91(5):2855–2868CrossRef Danish M, Ginta TL, Habib K, Carou D, Rani AMA, Saha BB (2017) Thermal analysis during turning of AZ31 magnesium alloy under dry and cryogenic conditions. Int J Adv Manuf Technol 91(5):2855–2868CrossRef
Metadaten
Titel
Orthogonal cutting mechanisms of CFRP/Ti6Al4V stacks
verfasst von
Jinyang Xu
Mohamed El Mansori
Ming Chen
Fei Ren
Publikationsdatum
10.05.2019
Verlag
Springer London
Erschienen in
The International Journal of Advanced Manufacturing Technology / Ausgabe 9-12/2019
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI
https://doi.org/10.1007/s00170-019-03734-x

Weitere Artikel der Ausgabe 9-12/2019

The International Journal of Advanced Manufacturing Technology 9-12/2019 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.