Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Bücher
Zeitschriften
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
SLX-Digitalkonferenz: Zukunftswerkstatt 2024

Mehr Umsatz mit Top-Kontakten

Am 7. Mai erfahren Sie, wie Vertriebsteams Leadgenerierung, Leadnurturing und Leadstrategien effizient steuern können.
Erweiterte Suche
Anmelden
nach oben
Erschienen in:
Introduction to Nanotechnology Kapitel lesen Erstes Kapitel lesen

2017 | OriginalPaper | Buchkapitel

43. Packaging and Reliability Issues in Micro/Nano Systems

verfasst von : Yu-Chuan Su, Jongbaeg Kim, Yu-Ting Cheng, Mu Chiao, Liwei Lin

Erschienen in: Springer Handbook of Nanotechnology

Verlag: Springer Berlin Heidelberg

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The potential of microelectromechanical systems (MEMS)/nanoelectromechanical systems (NEMS) technologies has been viewed as a revolution comparable to or even greater than that of microelectronics. The scientific and engineering advancements in MEMS/NEMS could enable applications that were previously unthinkable, from space systems, environmental instruments, to appliances for use in daily life. As presented in previous chapters, development of core MEMS/NEMS processes has already demonstrated many commercial applications as well as potential for advanced functionality in the future. However, low-cost and reliable packaging for protection of these MEMS/NEMS products remains a very difficult challenge. Without addressing these packaging and reliability issues, no commercial products can be sold on the market. Packaging design and modeling, packaging material selection, packaging process integration, and packaging cost are the main issues to be considered when developing a new MEMS packaging process. In this chapter, we present the fundamentals of MEMS/NEMS packaging technology, including packaging processes, hermetic and vacuum encapsulation, wafer-level packaging, three-dimensional (3-D) packaging, polymer-MEMS assembly and encapsulation, thermal issues, packaging reliability, and future packaging trends. Specifically, development of MEMS packaging will rely on successful implementation of several unique techniques, including packaging design kits for system and circuit designers, low-cost and high-yield wafer-level, chip-scale packaging techniques, effective testing techniques at wafer level to reduce overall testing costs, and reliable fabrication of an interposer [43.1] with vertical through interconnects for device integration.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Vorheriges Kapitel High Volume Manufacturing and Field Stability of MEMS Products
Nächstes Kapitel Nanotechnologies in Societal Context
Literatur
43.1
M. Matsuo, N. Hayasaka, K. Okumura, E. Hosomi, C. Takubo: Silicon interposer technology for high-density package. In: Proc. IEEE Electron. Compon. Technol. Conf. (2000) pp. 1455–1459
43.2
K.E. Peterson: Silicon as a mechanical material, Proc. IEEE 70, 420–457 (1982)
43.3
L. Lin, H.-C. Chu, Y.-W. Lu: A simulation program for the sensitivity and linearity of piezoresistive pressure sensors, IEEE/ASME J. Microelectromech. Syst. 8, 514–522 (1999)
43.4
Y.C. Tai, R.S. Muller: Lightly-doped polysilicon bridge as a flow meter, Sens. Actuators 15, 63–75 (1988)
43.5
D. Hicks, S.-C. Chang, M.W. Putty, D.S. Eddy: Piezoelectrically activated resonant bridge microacceleromenter. In: Tech. Digest Solid-State Sens. Actuators Workshop (1994) pp. 225–228
43.6
J. Berstein, S. Cho, A. King, A. Kourepenis, P. Maciel, M. Weinberg: A micromachined comb-drive tuning fork rate gyroscope. In: 6th IEEE Int. Conf. MEMS (1993) pp. 143–148
43.7
M. Madou: Compatibility and incompatibility of chemical sensors and analytical equipment with micromachining. In: Tech. Digest Solid-State Sens. Actuators Workshop (1994) pp. 164–171
43.8
M.J. Zdeblick, J.B. Angell: A microminiature electric-to-fluidic valve. In: Proc. Trandsucers’87, 4th Int. Conf. Solid-State Transducers Actuators (1987) pp. 827–829
43.9
J.H. Tsai, L. Lin: A thermal bubble actuated micro nozzle-diffuser pump, IEEE/ASME J. Microelectromech. Syst. 11, 665–671 (2002)
43.10
S.J. Ok, D. Baldwin: High density, aspect ratio through-wafer electrical interconnect vias for low cost, generic modular MEMS packaging. In: 8th IEEE Int. Symp. Adv. Packag. Mater. (2002) pp. 8–11
43.11
H. Reichl, V. Grosser: Overview and development trends in the field of MEMS packaging. In: 14th IEEE Int. Conf. MEMS (2001) pp. 1–5
43.12
R.R. Tummala, E.J. Rymaszewski, A.G. Klopfenstein: Microelectronics Packaging Handbook, Semiconductor Packaging (Springer, Dordrecht 1997)
43.13
C.A. Harper (Ed.): Electronic Packaging and Interconnection Handbook (McGraw-Hill, New York 1991)
43.14
P. Kapur, P.M. McVittie, K. Saraswat: Technology and reliability constrained future copper interconnects–Part II: Performance implication, IEEE Trans. Election Devices 49, 598–604 (2002)
43.15
J. Lau: Flip Chip Technologies (McGraw-Hill, New York 1996)
43.16
R. Prasad: Surface Mount Technology: Principles and Practice, 2nd edn. (Chapman Hall, New York 1989)
43.17
M. Töpper, J. Auersperg, V. Glaw, K. Kaskoun, E. Prack, B. Keser, P. Coskina, D. Jäger, D. Petter, O. Ehrmann, K. Samulewicz, C. Meinherz, S. Fehlberg, C. Karduck, H. Reichl: Fab integrated packaging (FIP) a new concept for high reliability wafer-level chip size packaging. In: IEEE Electron. Compon. Technol. Conf. (2000) pp. 74–81
43.18
S. Savastiouk, O. Siniaguine, E. Korczynski: 3-D wafer level packaging. In: Int. Conf. High-Density Interconnect Syst. Packag. (2000) pp. 26–31
43.19
J.H. Tsai, L. Lin: Micro-to-macro fluidic interconnectors with an integrated polymer sealant, J. Micromech. Microeng. 11, 577–581 (2001)
43.20
T.A. Core, W.K. Tsang, S. Sherman: Fabrication technology for an integrated surface-micromachined sensor, Solid State Technol. 36, 39–47 (1993)
43.21
K. Koester, R. Majedevan, A. Shishkoff, K. Marcus: Multi-User MEMS Processes (MUMPS) Introduction and Design Rules, Rev. 4 (MCNC MEMS Technology Applications Center, Research Triangle Park 1996)
43.22
R. Lengtenberg, H.A.C. Tilmans: Electrically driven vacuum-encapsulated polysilicon resonator, Part I: Design and fabrication, Sens. Actuators A 45, 57–66 (1994)
43.23
R.L. Smith, S.D. Collins: Micromachined packaging for chemical microsensors, IEEE Trans. Electron Devices 35, 787–792 (1988)
43.24
M.C. Wu: Micromachining for optical and optoelectronic systems, Proc. IEEE 85(11), 1833–1856 (1997)
43.25
M. Putty, K. Najafi: A micromachined gyroscope. In: Solid-State Sens. Actuators Workshop (1994) pp. 212–220
43.26
S. Wolf: Silicon Processing for the VLSI Era, Vol I: Process Technology (Lattice, Sunset Beach 1995)
43.27
J.K. Bhardway, H. Ashraf: Advanced silicon etching using high density plasmas, SPIE Micromach. Fabr. Technol. 2639, 224–233 (1995)
43.28
W.H. Ko, J.T. Suminto, G.J. Yeh: Bonding techniques for microsensors. In: Micromachining and Micropackaging for Transducers, ed. by C.D. Fung, P.W. Cheung, W.H. Ko, D.G. Fleming (Elsevier, Amsterdam 1985)
43.29
S.D. Senturia, R.L. Smith: Microsensor packaging and system partitioning, Sens. Actuators 15, 221–234 (1988)
43.30
J.T. Butler, V.M. Bright, P.B. Chu, R.J. Saia: Adapting multichip module foundries for MEMS packaging. In: IEEE Int. Conf. Multichip Modul. High Density Packag. (1998) pp. 106–111
43.31
M. Schuenemann, A.J. Kourosh, R.V. Grosse, R. Leutenbauer, G. Bauer, W. Schaefer, H. Reichl: MEM modular packaging and interfaces. In: IEEE Electron. Compon. Technol. Conf. (2000) pp. 681–688
43.32
D.W. Lee, T. Ono, T. Abe, M. Esashi: Fabrication of microprobe array with sub-100nm nano-heater for nanometric thermal imaging and data storage. In: Proc. IEEE Micro Electro Mech. Syst. Conf. (2001) pp. 204–207
43.33
A.S. Laskar, B. Blythe: Epoxy multichip modules, a solution to the problem of packaging and interconnection of sensors and signal-processing chips, Sens. Actuators A 36, 1–27 (1993)
43.34
R. Reichl: Packaging and interconnection of sensors, Sens. Actuators A 25–27, 63–71 (1991)
43.35
A. Grisel, C. Francis, E. Verney, G. Mondin: Packaging technologies for integrated electrochemical sensors, Sens. Actuators 17, 285–295 (1989)
43.36
J.L. Lund, K.D. Wise: Chip-level encapsulation of implantable CMOS microelectrode arrays. In: 1994 Solid-State Sens. Actuators Workshop (1989) pp. 29–32
43.37
T. Akin, B. Siaie, K. Najafi: Modular micromachined high-density connector for implantable biomedical systems. In: Micro Electro Mech. Syst. Workshop (1996) pp. 497–502
43.38
L. Muller, M.H. Hecht, L.M. Miller, H.K. Rockstad, J.C. Lyke: Packaging qualification for MEMS-based space systems. In: Micro Electro Mech. Syst. Workshop (1996) pp. 503–508
43.39
S.V. Groen, M. Rosmeulen, P. Jansen, K. Baert, L. Deferm: CMOS compatible wafer scale adhesive bonding for circuit transfer. In: Int. Conf. Solid-State Sens. Actuators, Transducers’97 (1997) pp. 629–632
43.40
Y.T. Cheng, Y.T. Hsu, L. Lin, C.T. Nguyen, K. Najafi: Vacuum packaging using localized aluminum/silicon-to-glass bonding using localized aluminum/silicon-to-glass bonding. In: 14th IEEE Int. Conf. MEMS (2001) pp. 18–21
43.41
M. Chiao, L. Lin: Vacuum packaging of microresonators by rapid thermal processing. In: Proc. SPIE Smart Electron., MEMS, Nanotechnol (2002) pp. 17–21
43.42
J.H. Partridge: Glass-to-Metal Seals (The Society of Glass Technology, Chapeltown 1949)
43.43
P. Kumar, V.A. Greenhut: Metal-to-Ceramic Joining (Minerals, Metals and Materials Society, Pittsburgh 1991)
43.44
M.G. Nicholas, D.A. Mortimer: Ceramic/metal joining for structural applications, Mater. Sci. Technol. 1, 657–665 (1985)
43.45
M. Esashi, S. Shoji, A. Nakano: Normally closed microvalve and micropump fabricated on a silicon wafer, Sens. Actuators 20, 163–169 (1989)
43.46
M.E. Poplawski, R.W. Hower, R.B. Brown: A simple packaging process for chemical sensors. In: Solid-State Sens. Actuators Workshop (1994) pp. 25–28
43.47
S.F. Trautweiler, O. Paul, J. Stahl, H. Baltes: Anodically bonded silicon membranes for sealed and flush mounted microsensors. In: Micro Electro Mech. Syst. Workshop (1996) pp. 61–66
43.48
E.H. Klaassen, K. Petersen, J.M. Noworolski, J. Logan, N.I. Malfu, J. Brown, C. Storment, W. McCulley, G.T.A. Kovac: Silicon fusion bonding and deep reactive ion etching: A new technology for microstructures, Sens. Actuators A 52, 132–139 (1996)
43.49
C.H. Hsu, M.A. Schmidt: Micromachined structures fabricated using a wafer-bonded sealed cavity process. In: Solid State Sens. Actuators Workshop (1994) pp. 151–155
43.50
A.L. Tiensuu, J.A. Schweitz, S. Johansson: In situ investigation of precise high strength micro assembly using Au-Si eutectic bonding. In: Int. Conf. Solid-State Sens. Actuators, Eurosens. IX (1995) pp. 236–239
43.51
A.P. Lee, D.R. Ciarlo, P.A. Krulevitch, S. Lehew, J. Trevino, M.A. Northrup: Practical microgripper by fine alignment, eutectic bonding and SMA actuation. In: Int. Conf. Solid-State Sens. Actuators, Eurosens. IX (1995) pp. 368–371
43.52
M.B. Cohn, Y. Liang, R. Howe, A.P. Pisano: Wafer to wafer transfer of microstructures for vacuum package. In: Solid State Sens. Actuators Workshop (1996) pp. 32–35
43.53
Q.-Y. Tong, U. Gosele: Semiconductor Wafer Bonding, Science and Technology (Wiley, New York 1999)
43.54
R.W. Bower, M.S. Ismail, B.E. Roberds: Low temperature Si3N4 direct bonding, Appl. Phys. Lett. 62, 3485–3487 (1993)
43.55
H. Takagi, R. Maeda, T.R. Chung, T. Suga: Low temperature direct bonding of silicon and silicon dioxide by the surface activation method. In: Int. Conf. Solid-State Sens. Actuators, Transducer 97, Vol. 1 (1997) pp. 657–660
43.56
G. Wallis, D. Pomerantz: Filed assisted glass-metal sealing, J. Appl. Phys. 40, 3946–3949 (1969)
43.57
L. Bowman, J. Meindl: The packaging of implantable integrated sensors, IEEE Trans. Biomed. Eng. 33, 248–255 (1986)
43.58
M. Esashi: Encapsulated micro mechanical sensors, Microsyst. Technol. 1, 2–9 (1994)
43.59
B. Ziaie, J. Von Arx, M. Dokmeci, K. Najafi: A hermetic glass-silicon micropackages with high-density on-Chip feedthroughs for sensors and actuators, J. Microelectromech. Syst. 5, 166–179 (1996)
43.60
Y. Lee, K. Wise: A batch-fabricated silicon capacitive pressure transducer with low temperature sensitivity, IEEE Trans. Electron Devices 29, 42–48 (1982)
43.61
S. Shoji, H. Kicuchi, H. Torigoe: Anodic bonding below 180 degree C for packaging and assembling of MEMS using lithium aluminosilicate-beta-quartz glass-ceramic. In: Proc. 10th Annu. Int. Workshop Micro Electro Mech. Syst. (1997) pp. 482–487
43.62
M. Esashi, N. Akira, S. Shoji, H. Hebiguchi: Low-temperature silicon-to-silicon anodic bonding with intermediate low melting point glass, Sens. Actuators A 23, 931–934 (1990)
43.63
A. Hanneborg, M. Nese, H. Jakobsen, R. Holm: Silicon-to-thin film anodic bonding, J. Micromech. Microeng. 2, 117–121 (1992)
43.64
A.V. Chavan, K.D. Wise: Batch-processed vacuum-sealed capacitive pressure sensors, ASME/IEEE J. Microelectromech. Syst. 10(4), 580–588 (2001)
43.65
H. Henmi, S. Shoji, Y. Shoji, K. Yoshimi, M. Esashi: Vacuum packaging for microsensors by glass-silicon anodic bonding, Sens. Actuators A 43(1–3), 243–248 (1994)
43.66
T. Hara, S. Kobayashi, K. Ohwada: A new fabrication method for low-pressure package with glass-silicon-glass structure and its stability. In: 10th Int. Conf. Solid-State Sens. Actuators, Transducers’99 Digest Tech. Papers, Vol. 2 (1999) pp. 1316–1319
43.67
S.A. Audet, K.M. Edenfeld: Integrated sensor wafer-level packaging. In: Int. Conf. Solid-State Sens. Actuators, Transducers’97 (1997) pp. 287–289
43.68
R.C. Benson, N. de Haas, P. Goodwin, T.E. Phillips: Epoxy adhesives in microelectronic hybrid applications, Johns Hopkins APL Tech. Dig. 13, 400–406 (1992)
43.69
M. Shimbo, J. Yoshikawa: New silicon bonding method, J. Electrochem. Soc. 143, 2371–2377 (1996)
43.70
P.M. Zavracky, B. Vu: Patterned eutectic bonding with Al/Ge thin film for MEMS, Proc. SPIE 2639, 46–52 (1995)
43.71
J. Seeger, M. Lim, S. Nasiri: Development of high-performance, high-volume consumer MEMS gyroscopes. In: Solid-State Sens., Actuators, Microsyst. Workshop (2010) pp. 61–64
43.72
G. Humpston, D.M. Jacobson: Principles of Soldering and Brazing (ASM International, Materials Park 1993) pp. 241–244
43.73
A. Singh, D. Horsely, M.B. Cohn, R. Howe: Batch transfer of microstructures using flip-chip solder bump bonding. In: Int. Conf. Solid State Sens. Actuators, Transducer 97, Vol. 1 (1997) pp. 265–268
43.74
M.M. Maharbiz, M.B. Cohn, R.T. Howe, R. Horowitz, A.P. Pisano: Batch micropackaging by compression-bonded wafer-wafer transfer. In: 12th Int. Conf. MEMS (1999) pp. 482–489
43.75
Y.T. Cheng, L. Lin, K. Najafi: Localized silicon fusion and eutectic bonding for MEMS fabrication and packaging, IEEE/ASME J. Microelectromech. Syst. 9, 3–8 (2000)
43.76
L. Lin: Selective Encapsulations of MEMS: Micro Channels, Needles, Resonators, and Electromechanical Filters, Ph.D. Thesis (Univ. California, Berkeley 1993)
43.77
Y.C. Su, L. Lin: Localized plastic bonding for micro assembly, packaging and liquid encapsulation. In: Proc. IEEE Micro Electro Mech. Syst. Conf. (2001) pp. 50–53
43.78
M. Schwartz: Brazing (Chapman Hall, London 1995)
43.79
K. Ikeda, H. Kuwayama, T. Kobayashi, T. Watanabe, T. Nishikawa, T. Oshida, K. Harada: Three dimensional micromachining of silicon pressure sensor integrating resonant strain gauge on diaphragm, Sens. Actuators A 21–23, 1001–1010 (1990)
43.80
L. Lin, R.T. Howe, A.P. Pisano: Microelectromechanical filters for signal processing, IEEE/ASME J. Microelectromech. Syst. 7, 286–294 (1998)
43.81
W.C. Tang, C.T.-C. Nguyen, R.T. Howe: Laterally driven polysilicon resonant microstructures, Sens. Actuators A 20, 25–32 (1989)
43.82
G.T. Mulhern, D.S. Soane, R.T. Howe: Supercritical carbon dioxide drying of microstructures. In: 7th Int. Conf. Solid State Sens. Actuators (1993) pp. 296–299
43.83
M. Judy: Micromechanisms Using Sidewall Beams, Ph.D. Thesis (EECS Department, Univ. California, Berkeley 1994) p. 162
43.84
R. Aigner, N.K.-G. Opperman, H. Kapels, S. Kolb: Cavity-micromachining technology: Zero-package solution for inertial sensors. In: TRANSDUCERS ’01. EUROSENSORS XV. 11th Int. Conf. Solid-State Sens. Actuators. Dig. Techn. Papers (2001) pp. 186–189
43.85
M. Bartek, J.A. Foerster, R.F. Wolffenbuttel: Vacuum sealing of mcirocavities using metal evaporation, Sens. Actuators A 61, 364–368 (1997)
43.86
J.J. Sniegowski, H. Guckle, R.T. Christenson: Performance characteristics of second generation polysilicon resonating beam force transducers. In: IEEE Solid-State Sensor Actuator Workshop (1990) pp. 9–12
43.87
C.H. Mastrangelo, R.S. Muller, S. Kumar: Microfabricated incandescent lamps, Appl. Optics 30, 868–873 (1993)
43.88
J. Smith, S. Montague, J. Sniegowski, L.R. Manginel, P. McWhorter, R. Huber: Characterization of the embedded micromechanical device approach to the monolithic integration of MEMS with CMOS, Proc. SPIE 2879, 306 (1996)
43.89
A. Partridge, M. Lutz, B. Kim, M. Hopcroft, R.N. Candler, T.W. Kenny, M. Esashi: MEMS resonators: Getting the packaging right. In: Proc. 9th SEMI Microsyst./MEMS Seminar (SEMICON) (2005) pp. 55–58
43.90
A.M. Leung, J. Jones, E. Czyzewska, J. Chen, B. Woods: Micromachined accelerometer based on convection heat transfer. In: 11th Int. Conf. MEMS (1998) pp. 627–630
43.91
D.R. Spark, L. Jordan, J.H. Frazee: Flexible vacuum-packaging method for resonating micromachines, Sens. Actuators A 55, 179–183 (1996)
43.92
M. Chiao, L. Lin: Hermetic wafer bonding based on rapid thermal processing, Sens. Actuators A 91, 398–402 (2001)
43.93
Y.T. Cheng, L. Lin, K. Najafi: Fabrication and hermeticity testing of a glass-silicon packaging formed using localized aluminum/silicon-to-glass bonding, IEEE/ASME J. Microelectromech. Syst. 10, 392–399 (2001)
43.94
M. Chiao, L. Lin: Accelerated hermeticity testing of a glass-silicon package formed by rapid thermal processing aluminum-to-silicon nitride bonding, Sens. Actuators A 97/98, 405–409 (2002)
43.95
M.K. Keshavan, G.A. Sargent, H. Conrad: Statistical analysis of the hertzian fracture of pyrex glass using the Weibull distribution function, J. Mater. Sci. 15, 839–844 (1980)
43.96
M. Chiao, L. Lin: A wafer-level vacuum packaging process by RTP aluminum-to-nitride bonding. In: Tech. Dig. Solid-State Sens., Actuators Microsyst. Workshop (2002) pp. 81–85
43.97
F. Rosebury: Handbook of Electron Tube and Vacuum Techniques (Addison-Wesley, Boston 1965)
43.98
Y.T. Cheng, W.T. Hsu, K. Najafi, C.T. Nguyen, L. Lin: Vacuum packaging technology using localized aluminum/silicon-to-glass bonding, J. Microelectromech. Syst. 11(5), 556–565 (2002)
43.99
C. Luo, L. Lin: The application of nanosecond-pulsed laser welding technology in MEMS packaging with a shadow mask, Sens. Actuators A 97/98, 398–404 (2002)
43.100
A. Cao, M. Chiao, L. Lin: Selective and localized wafer bonding using induction heating. In: Tech. Dig. Solid-State Sens. Actuators Workshop (2002) pp. 153–156
43.101
J.B. Kim, M. Chiao, L. Lin: Ultrasonic bonding of In/Au and Al/Al for hermetic sealing of MEMS packaging. In: Proc. IEEE Micro Electro Mech. Syst. Conf. (2002) pp. 415–418
43.102
Y.T. Cheng, L. Lin, K. Najafi: Localized bonding with PSG or indium solder as intermediate layer. In: 12th Int. Conf. MEMS (1999) pp. 285–289
43.103
M. Esashi: Wafer level packaging of MEMS, J. Micromech. Microeng. 18, 073001 (2008)
43.104
M. Lapisa, G. Stemme, F. Niklaus: Wafer-level heterogeneous integration for MOEMS, MEMS, and NEMS, IEEE J. Sel. Top. Quantum Electron. 17, 629–644 (2011)
43.105
C. Liu: Recent developments in polymer MEMS, Adv. Mater. 19, 3783–3790 (2007)
43.106
R.C. Ruby, A. Barfknecht, C. Han, Y. Desai, F. Geefay, G. Gan, M. Gat, T. Verhoeven: High-Q FBAR filters in a wafer-level chip-scale package. In: IEEE Int. Solid-State Circuit Conf. (2002) pp. 184–185
43.107
H. Shao, D. Kumar, S.A. Feld, K.L. Lear: Fabrication of a Fabry-Perot cavity in a microfluidic channel using thermocompressive gold bonding of glass substrates, J. Microelectromech. Syst. 14, 756–762 (2005)
43.108
A. Decharat, M. Boers, F. Niklaus, G. Stemme: Novel room-temperature wafer-to-wafer attachment and sealing of cavities using cold metal welding. In: Tech. Dig. MEMS (2007) pp. 385–388
43.109
C.H. Yun, J.R. Martin, E.B. Tarvin, J.T. Winbigler: Al to Al wafer bonding for MEMS encapsulation and 3-D interconnect MEMS2008. In: Tech. Dig. (2008) pp. 810–813
43.110
K.-N. Chen, S.H. Lee, P.S. Andry, C.K. Tsang, A.W. Topol, Y.-M. Lin, J.-Q. Lu, A.M. Young, M. Ieong, W. Haensch: Structure, design and process control for Cu bonded interconnects in 3-D integrated circuits IEDM. In: Tech. Dig. (2006) pp. 367–370
43.111
L. Lin, K. McNair, R.T. Howe, A.P. Pisano: Vacuum encapsulated lateral microresonators. In: 7th Int. Conf. Solid State Sens. Actuators (1993) pp. 270–273
43.112
H. Guckel: Surface micromachined pressure transducers, Sens. Actuators A 28, 133–146 (1991)
43.113
C.H. Mastrangelo, R.S. Muller: Vacuum-sealed silicon micromachined incandescent light source. In: IEEE IEDM (1989) pp. 503–506
43.114
P. Monajemi, P.J. Joseph, P.A. Kohl, F. Ayazi: Wafer-level MEMS packaging via thermally released metal–organic membranes, J. Micromech. Microeng. 16, 742–750 (2006)
43.115
K.S. Lebouitz, R.T. Howe, A. Pisano: Permeable polysilicon etch-access windows for microshell fabrication. In: Dig. Tech. Papers, Transducers (1995) pp. 224–227
43.116
R. He, C.J. Kim: On-wafer monolithic encapsulation by surface micromachining with porous polysilicon shell, J. Microelectromech. Syst. 16, 462–472 (2007)
43.117
B.H. Stark, K. Najafi: A mold and transfer technique for lead-free fluxless soldering and application to MEMS packaging, J. Microelectromech. Syst. 15, 849–857 (2006)
43.118
M. Esashi, N. Ura, Y. Matsumoto: Anodic bonding for integrated capacitive sensors. In: Proc. Micro Electro Mech. Syst.’92 (1992) pp. 43–48
43.119
C.H. Yun, J.R. Martin, T. Chen, D. Davis: MEMS wafer-level packaging with conductive vias and wafer bonding. In: Dig. Tech. Papers, Transducers’07 (2007) pp. 2091–2094
43.120
S. Nasiri: Wafer level packaging of MOEMS solves manufacturability challenges in optical cross connect. In: IEEE Photonic Devices Syst. Packag. Symp (2003)
43.121
P. Chen, C. Lin, C. Liu: Amorphous Si/Au wafer bonding, Appl. Phys. Lett. 90(13), 132120 (2007)
43.122
P.R. Morrow, C.-M. Park, S. Ramanathan, M.J. Kobrinsky, M. Harmes: Three-dimensional wafer stacking via Cu–Cu bonding integrated with 65-nm strained-Si/low-k CMOS technology, IEEE Electron Device Lett. 27(5), 335–337 (2006)
43.123
I.W. Jung, Y.-A. Peter, E. Carr, J.-S. Wang, O. Solgaard: Single-crystal-silicon continuous membrane deformable mirror array for adaptive optics in space-based telescopes, IEEE J. Sel. Top. Quantum. Electron. 13(2), 162–167 (2007)
43.124
MEMS Process Review Report: InvenSense IDG-300 Dual-Axis Angular Rate Gyroscope Sensor (Chipworks, Ottawa 2007) MPR-0702–0801
43.125
S. Nasiri: New innovations in MEMS fabrications are responsible for meeting the demand for low-cost inertial sensors for consumer markets. In: IMAPS Proc (2007) pp. 407–412
43.126
F. Zimmer, M. Lapisa, T. Bakke, M. Bring, G. Stemme, F. Niklaus: One-megapixel monocrystalline-silicon micromirror array on CMOS driving electronics manufactured with very large-scale heterogeneous integration, J. Microelectromech. Syst. 20(3), 564–572 (2011)
43.127
F. Zimmer, M.A. Lapisa, T. Bakke, M. Bring, G. Stemme, F. Niklaus: Very large scale heterogeneous system integration for 1-megapixel mono-crystalline silicon micro-mirror array on CMOS driving electronics. In: Proc. IEEE MEMS (2011) doi:10.​1109/​MEMSYS.​2011.​5734530 CrossRef
43.128
F. Forsberg, N. Roxhed, P. Ericsson, S. Wissmar, F. Niklaus, G. Stemme: High-performance quantum-well silicon-germanium bolometers using IC-compatible integration for low-cost infrared imagers. In: Proc. Transducers, Denver (2009) pp. 2214–2217
43.129
43.130
A. Lapadatu, G. Kittilsland, A. Elfving, E. Hohler, T. Kvisterøy, T. Bakke, P. Ericsson: High-performance long wave infrared bolometer fabricated by wafer bonding, Proc. SPIE 7660, 766016 (2010)
43.131
J. Voldman, M.L. Gray, M.A. Schmidt: Microfabrication in biology and medicine, Annu. Rev. Biomed. Eng. 1, 401–425 (1999)
43.132
H. Becker, L.E. Locascio: Polymer microfluidic devices, Talanta 56, 267–287 (2002)
43.133
Y.-C. Su, L. Lin: Localized bonding processes for assembly and packaging of polymeric MEMS, IEEE Trans. Adv. Packag. 28, 635–642 (2005)
43.134
G. Thyrum, E. Cruse: Heat pipe simulation, a simplified technique for modeling heat pipe assisted heat sinks, Adv. Packag. 10(12), 23–27 (2001)
43.135
G.P. Peterson, A.B. Duncan, M.H. Weichold: Experimental investigation of micro heat pipes fabricated in silicon wafers, J. Heat Trans. 115, 751–756 (1993)
43.136
L. Jiang, M. Wong, Y. Zohar: Forced convection boiling in a microchannel heat sink, IEEE/ASME J. Microelectromech. Syst. 10, 80–87 (2001)
43.137
F. Arias, S.R.J. Oliver, B. Xu, E. Holmlin, G.M. Whitesides: Fabrication of metallic exchangers using sacrificial polymer mandrils, IEEE/ASME J. Microelectromech. Syst. 10, 107–112 (2001)
43.138
ANSYS Modeling and Meshing Guide, 3rd edn. (SAS IP, Canonsburg 2013)
43.139
D. Bystrom, L. Lin: Residual stress analysis of silicon-aluminum-glass bonding processes. In: ASME 2002 Int. Mech. Eng. Congr. Expos., MEMS Symp. (2002) pp. 45–50
43.140
H. Scholze: Glass: Nature, Structure, and Properties, 1st edn. (Springer, New York 1991)
43.141
R.R. Tummala: Fundamentals of Microsystems Packaging (McGraw-Hill, New York 2001)
43.142
S.J. Adamson: BGA, CSP, and flip chip, Adv. Packag. 11(6), 21–24 (2002)
43.143
JEDEC Solid State Technol. Assoc.: Accelerated Moisture Resistance-Unbiased Autoclave (JEDEC, Arlington 2000), JESD22-A102C
43.144
M. Dokmeci, K. Najafi: A high-sensitivity polyimide capacitive relative humidity sensor for monitoring anodically bonded hermetic micropackages, IEEE/ASME J. Microelectromech. Syst. 10(2), 197–204 (2001)
43.145
E.E. Lewis: Introduction to Reliability Engineering, 2nd edn. (Wiley, New York 1996)
43.146
W.D. Brown: Advanced Electronic Packaging (IEEE, Piscataway 1999)
43.147
F. Niklaus, P. Znoksson, E. Käluesten, G. Stemme: Void free full wafer adhesion bonding. In: Proc. IEEE Micro Electro Mech. Syst. Conf. (2000) pp. 241–252
43.148
C.H. Cheng, A.S. Ergun, B.T. Khuri-Yakub: Electrical through-wafer interconnects with sub-picofarad parasitic capacitance. In: IEEE Electron. Compon. Technol. Conf. (2002) pp. 18–21
43.149
D. Routkevitch, A.A. Tager, J. Haruyama, D. Almawlawi, M. Moskovits, J. Xu: Nonlithographic nano-array arrays: Fabrication, physics, and device applications, IEEE Trans. Electron Devices 43, 1646–1658 (1996)
43.150
J. Gou, M. Lundstrom, S. Datta: Performance projections for ballistic carbon nanotube fieldeffect transistors, Appl. Phys. Lett. 80, 3192–3194 (2002)
43.151
S.U.S. Choi, Z.G. Zhang, W. Yu, F.E. Lockwood, E.A. Grulke: Anomalous thermal conductivity enhancement in nanotube suspensions, Appl. Phys. Lett. 79, 2252–2254 (2001)
43.152
K. Velikov, A. Moroz, A. Blaaderen: Photonic crystals of core-shell colloidal particles, Appl. Phys. Lett. 80, 49–51 (2002)
Metadaten
Titel
Packaging and Reliability Issues in Micro/Nano Systems
verfasst von
Yu-Chuan Su
Jongbaeg Kim
Yu-Ting Cheng
Mu Chiao
Liwei Lin
Copyright-Jahr
2017
Verlag
Springer Berlin Heidelberg
Buch
Springer Handbook of Nanotechnology

Print ISBN: 978-3-662-54355-9

Electronic ISBN: 978-3-662-54357-3

Copyright-Jahr: 2017

DOI
https://doi.org/10.1007/978-3-662-54357-3_43

Neuer Inhalt

    Bildnachweise