Skip to main content
main-content

Tipp

Weitere Artikel dieser Ausgabe durch Wischen aufrufen

Erschienen in: Strength of Materials 5/2021

03.01.2022

Peculiarities of Strengthening of Spherical Composite Pressure Vessels with Thin Metal Shells Under Static and Dynamic Loads. Part 2. Dynamic Loading

verfasst von: P. P. Lepikhin, V. A. Romashchenko, S. O. Tarasovs’ka

Erschienen in: Strength of Materials | Ausgabe 5/2021

Einloggen, um Zugang zu erhalten
share
TEILEN

Abstract

An elastic boundary-value problem was solved for a two-layer sphere acted upon by an internal dynamic pressure generated by an explosion of a spherical explosive charge. The peculiarities of solutions for shells with an ultrathin inner metallic layer were studied. An analysis was performed to compare the static case with the dynamic one. The peculiarities of such solutions were pointed out. Taking into account the data earlier obtained by the authors, it was proved analytically and numerically that in two-layer spherical metal composite vessels, the hoop stresses in the inner layer (S1) could be much higher than the stresses in the outer layer (S2) if the thickness of the inner metallic layer was much smaller than that of the outer layer. An exact asymptotic ratio S1/S2 for static and dynamic problems was obtained. It is shown that in such structural elements at small relative thicknesses of the metallic layer, there can be a softening region. A formula was derived, which made it possible to predict in an engineering approximation the presence or absence of a softening region. For the dynamic problem, it was found that with decreasing thickness of the inner more rigid layer, the hoop stresses in it grew in proportion to the ratio of the spherical rigidities of the materials of the inner and outer layers. This can lead, as in the static case, to the fact that the pseudo-reinforcement of the composite shell with a too thin inner fairly rigid and strong metallic layer will not only be inefficient, but also can cause a failure of the inner layer and hence of the shell as a whole under loads that are fairly safe for the composite shell without the inner pseudo-reinforcing layer.
Literatur
1.
2.
Zurück zum Zitat G. S. Pisarenko, A. P. Yakovlev, and V. V. Matveev, Reference Book on Resistance of Materials [in Russian], Delta, Kiev (2008). G. S. Pisarenko, A. P. Yakovlev, and V. V. Matveev, Reference Book on Resistance of Materials [in Russian], Delta, Kiev (2008).
3.
Zurück zum Zitat G. Randers-Pehrson and K. A. Bannister, Airblast Loading Model for DYNA2D and DYNA3D, Technical Report ARL-TR-1310, Army Research Laboratory (1997). G. Randers-Pehrson and K. A. Bannister, Airblast Loading Model for DYNA2D and DYNA3D, Technical Report ARL-TR-1310, Army Research Laboratory (1997).
Metadaten
Titel
Peculiarities of Strengthening of Spherical Composite Pressure Vessels with Thin Metal Shells Under Static and Dynamic Loads. Part 2. Dynamic Loading
verfasst von
P. P. Lepikhin
V. A. Romashchenko
S. O. Tarasovs’ka
Publikationsdatum
03.01.2022
Verlag
Springer US
Erschienen in
Strength of Materials / Ausgabe 5/2021
Print ISSN: 0039-2316
Elektronische ISSN: 1573-9325
DOI
https://doi.org/10.1007/s11223-021-00336-5

Weitere Artikel der Ausgabe 5/2021

Strength of Materials 5/2021 Zur Ausgabe

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.