Skip to main content
Erschienen in: Journal of Materials Engineering and Performance 11/2020

28.10.2020

Performance of Mechanical Joints Prepared from Carbon-Fiber-Reinforced Polymer Nanocomposites under Accelerated Environmental Aging

verfasst von: Mohit Kumar, J. S. Saini, H. Bhunia

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 11/2020

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The influence of environmental aging on the durability of the civil structural components made of fiber/epoxy composites is a big concern for many industries nowadays. For that reason, accelerated environmental aging was performed on the bolted joints prepared from carbon/epoxy composites. The bolted joints were designed using ASTM D 5961 having an edge to diameter ratio and width to diameter ratio as 5 and 6, respectively. The cyclic exposure of ultraviolet radiation for 8 h at 60 °C and condensation for 4 h at 50 °C was used under accelerated environmental aging conditions according to ASTM G154 standard for 0, 250, 500, 750 and 1000 h. It was found that at shorter durations, the positive effect occurred with increased strength, whereas the strength decreased for longer durations. The failure loads were found for neat and multi-walled carbon nanotube (MWCNT) added composite bolted joints for unaged and aged conditions at varying bolt preloads. The MWCNT added composites shows better results than neat composites. It was also observed that bolt preloads improved the load-bearing capacity for MWCNT added composite joints even after 1000 h of accelerated aging.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat C. Soutis, Fibre Reinforced Composites in Aircraft Construction, Prog. Aerosp. Sci., 2005, 41(2), p 143–151 C. Soutis, Fibre Reinforced Composites in Aircraft Construction, Prog. Aerosp. Sci., 2005, 41(2), p 143–151
2.
Zurück zum Zitat M. Holmes, Global Carbon Fibre Market Remains on Upward Trend, Reinf. Plast., 2014, 58(6), p 38–45 M. Holmes, Global Carbon Fibre Market Remains on Upward Trend, Reinf. Plast., 2014, 58(6), p 38–45
3.
Zurück zum Zitat A. Jacob, Carbon Fibre and Cars-2013 in Review, Reinf. Plast., 2014, 58(1), p 18–29 A. Jacob, Carbon Fibre and Cars-2013 in Review, Reinf. Plast., 2014, 58(1), p 18–29
4.
Zurück zum Zitat F. Rubino, A. Nistico, F. Tucci, and P. Carlone, Marine Application of Fiber Reinforced Composites: A Review, J. Marine Sci. Eng., 2020, 8(1), p 26–35 F. Rubino, A. Nistico, F. Tucci, and P. Carlone, Marine Application of Fiber Reinforced Composites: A Review, J. Marine Sci. Eng., 2020, 8(1), p 26–35
5.
Zurück zum Zitat S. Gopi, P. Balakrishnan, M. Sreekala, A. Pius, and S. Thomas, Green Materials for Aerospace Industries, Biocomposites for High-Performance Applications, 1st ed., D. Ray, Ed., Woodhead Publishing, Sawston, 2017, p 307–318 S. Gopi, P. Balakrishnan, M. Sreekala, A. Pius, and S. Thomas, Green Materials for Aerospace Industries, Biocomposites for High-Performance Applications, 1st ed., D. Ray, Ed., Woodhead Publishing, Sawston, 2017, p 307–318
6.
Zurück zum Zitat I. Panaitescu, T. Koch, and V.M. Archodoulaki, Accelerated Aging of a Glass Fiber/Polyurethane Composite for Automotive Applications, Polym. Test., 2019, 74, p 245–256 I. Panaitescu, T. Koch, and V.M. Archodoulaki, Accelerated Aging of a Glass Fiber/Polyurethane Composite for Automotive Applications, Polym. Test., 2019, 74, p 245–256
7.
Zurück zum Zitat S.S. Pendhari, T. Kant, and Y.M. Desai, Application of Polymer Composites in Civil Construction: A General Review, Compos. Struct., 2008, 84(2), p 114–124 S.S. Pendhari, T. Kant, and Y.M. Desai, Application of Polymer Composites in Civil Construction: A General Review, Compos. Struct., 2008, 84(2), p 114–124
8.
Zurück zum Zitat P. Yusong, M. Jiaheng, and D. Jie, Effect of Carbon Fiber Surface Modification on the Mechanical Properties of Carbon-Fiber-Reinforced Ultrahigh-Molecular-Weight Polyethylene Composite, J. Mater. Eng. Perform., 2019, 28(4), p 1995–2005 P. Yusong, M. Jiaheng, and D. Jie, Effect of Carbon Fiber Surface Modification on the Mechanical Properties of Carbon-Fiber-Reinforced Ultrahigh-Molecular-Weight Polyethylene Composite, J. Mater. Eng. Perform., 2019, 28(4), p 1995–2005
9.
Zurück zum Zitat V. Lopresto, A. Langella, and I. Papa, Interaction of Water with Carbon Fiber Reinforced Polymer Laminates under Dynamic Loading Conditions, J. Mater. Eng. Perform., 2019, 28(6), p 3220–3227 V. Lopresto, A. Langella, and I. Papa, Interaction of Water with Carbon Fiber Reinforced Polymer Laminates under Dynamic Loading Conditions, J. Mater. Eng. Perform., 2019, 28(6), p 3220–3227
10.
Zurück zum Zitat B.P. Panda, S. Mohanty, and S.K. Nayak, Polyolefin Nanocomposites with Enhanced Photostability Weathering Effect on Morphology and Mechanical Properties, J. Mater. Eng. Perform., 2014, 23(9), p 3229–3244 B.P. Panda, S. Mohanty, and S.K. Nayak, Polyolefin Nanocomposites with Enhanced Photostability Weathering Effect on Morphology and Mechanical Properties, J. Mater. Eng. Perform., 2014, 23(9), p 3229–3244
11.
Zurück zum Zitat C. Javier, T. Smith, J. LeBlanc, and A. Shukla, Effect of Prolonged Ultraviolet Radiation Exposure on the Blast Response of Fiber Reinforced Composite Plates, J. Mater. Eng. Perform., 2019, 28(6), p 3174–3185 C. Javier, T. Smith, J. LeBlanc, and A. Shukla, Effect of Prolonged Ultraviolet Radiation Exposure on the Blast Response of Fiber Reinforced Composite Plates, J. Mater. Eng. Perform., 2019, 28(6), p 3174–3185
12.
Zurück zum Zitat K.K. Mahato, K. Dutta, and B.C. Ray, Static and Dynamic Behavior of Fibrous Polymeric Composite Materials at Different Environmental Conditions, J. Polym. Environ., 2018, 26(3), p 1024–1050 K.K. Mahato, K. Dutta, and B.C. Ray, Static and Dynamic Behavior of Fibrous Polymeric Composite Materials at Different Environmental Conditions, J. Polym. Environ., 2018, 26(3), p 1024–1050
13.
Zurück zum Zitat M. Singh, J. Saini, and H. Bhunia, Investigation on Failure Modes for Pin Joints Made from Unidirectional Glass-Epoxy Nanoclay Laminates, Fatig. Frac. Eng. Mater. Struct., 2016, 39(3), p 320–334 M. Singh, J. Saini, and H. Bhunia, Investigation on Failure Modes for Pin Joints Made from Unidirectional Glass-Epoxy Nanoclay Laminates, Fatig. Frac. Eng. Mater. Struct., 2016, 39(3), p 320–334
14.
Zurück zum Zitat K. Singh, J. Saini, H. Bhunia, and J. Singh, Investigations to Increase the Failure Load for Joints in Glass Epoxy Composites, J. Mech. Eng. Sci., 2019, 233(6), p 2074–2090 K. Singh, J. Saini, H. Bhunia, and J. Singh, Investigations to Increase the Failure Load for Joints in Glass Epoxy Composites, J. Mech. Eng. Sci., 2019, 233(6), p 2074–2090
15.
Zurück zum Zitat A.H.I. Mourad and N. Zaaroura, Impact of Nanofillers Incorporation on Laminated Nanocomposites Performance, J. Mater. Eng. Perform., 2018, 27(9), p 4453–4461 A.H.I. Mourad and N. Zaaroura, Impact of Nanofillers Incorporation on Laminated Nanocomposites Performance, J. Mater. Eng. Perform., 2018, 27(9), p 4453–4461
16.
Zurück zum Zitat W. Liu, S.V. Hoa, and M. Pugh, Fracture Toughness and Water Uptake of High-Performance Epoxy/Nanoclay Nanocomposites, Compos. Sci. Technol., 2005, 65(15–16), p 2364–2373 W. Liu, S.V. Hoa, and M. Pugh, Fracture Toughness and Water Uptake of High-Performance Epoxy/Nanoclay Nanocomposites, Compos. Sci. Technol., 2005, 65(15–16), p 2364–2373
17.
Zurück zum Zitat B.G. Kumar, P.S. Raman, and N. Toshio, Degradation of Carbon Fiber-Reinforced Epoxy Composites by Ultraviolet Radiation and Condensation, J. Compos. Mater., 2002, 36(24), p 2713–2733 B.G. Kumar, P.S. Raman, and N. Toshio, Degradation of Carbon Fiber-Reinforced Epoxy Composites by Ultraviolet Radiation and Condensation, J. Compos. Mater., 2002, 36(24), p 2713–2733
18.
Zurück zum Zitat R.S. Woo, Y. Chen, H. Zhu, J. Li, J.K. Kim, and C.K. Leung, Environmental Degradation of Epoxy-Organoclay Nanocomposites Due to UV Exposure Part I: Photo-Degradation, Compos. Sci. Technol., 2007, 67(15–16), p 3448–3456 R.S. Woo, Y. Chen, H. Zhu, J. Li, J.K. Kim, and C.K. Leung, Environmental Degradation of Epoxy-Organoclay Nanocomposites Due to UV Exposure Part I: Photo-Degradation, Compos. Sci. Technol., 2007, 67(15–16), p 3448–3456
19.
Zurück zum Zitat R.S. Woo, H. Zhu, C.K. Leung, and J.K. Kim, Environmental Degradation of Epoxy-Organoclay Nanocomposites Due to UV Exposure: Part II, Residual Mechanical Properties, Compos. Sci. Technol., 2008, 68(9), p 2149–2155 R.S. Woo, H. Zhu, C.K. Leung, and J.K. Kim, Environmental Degradation of Epoxy-Organoclay Nanocomposites Due to UV Exposure: Part II, Residual Mechanical Properties, Compos. Sci. Technol., 2008, 68(9), p 2149–2155
20.
Zurück zum Zitat D.E. Mouzakis, H. Zoga, and C. Galiotis, Accelerated Environmental Ageing Study of Polyester/Glass Fiber Reinforced Composites (GFRPCs), Compos. B Eng., 2008, 39(3), p 467–475 D.E. Mouzakis, H. Zoga, and C. Galiotis, Accelerated Environmental Ageing Study of Polyester/Glass Fiber Reinforced Composites (GFRPCs), Compos. B Eng., 2008, 39(3), p 467–475
21.
Zurück zum Zitat L. Chang and W. Chow, Accelerated Weathering on Glass Fiber/Epoxy/Organomont-Morillonite Nanocomposites, J. Compos. Mater., 2010, 44(12), p 1421–1434 L. Chang and W. Chow, Accelerated Weathering on Glass Fiber/Epoxy/Organomont-Morillonite Nanocomposites, J. Compos. Mater., 2010, 44(12), p 1421–1434
22.
Zurück zum Zitat T.C. Nguyen, Y. Bai, X.L. Zhao, and R. Al-Mahaidi, Effects of Ultraviolet Radiation and Associated Elevated Temperature on Mechanical Performance of Steel/CFRP Double Strap Joints, Compos. Struct., 2012, 94(12), p 3563–3573 T.C. Nguyen, Y. Bai, X.L. Zhao, and R. Al-Mahaidi, Effects of Ultraviolet Radiation and Associated Elevated Temperature on Mechanical Performance of Steel/CFRP Double Strap Joints, Compos. Struct., 2012, 94(12), p 3563–3573
23.
Zurück zum Zitat A. Rios, W.F. de Amorim Junior, E.P. de Moura, A. de Deus, and J.P. de Andrade Feitosa, Effects of Accelerated Aging on Mechanical, Thermal and Morphological Behavior of Polyurethane/Epoxy/Fiberglass Composites, Polym. Testing, 2016, 50, p 152–163 A. Rios, W.F. de Amorim Junior, E.P. de Moura, A. de Deus, and J.P. de Andrade Feitosa, Effects of Accelerated Aging on Mechanical, Thermal and Morphological Behavior of Polyurethane/Epoxy/Fiberglass Composites, Polym. Testing, 2016, 50, p 152–163
24.
Zurück zum Zitat J. Nicholas, M. Mohamed, G. Dhaliwal, S. Anandan, and K. Chandrashekhara, Effects of Accelerated Environmental Aging on Glass Fiber Reinforced Thermoset Polyurethane Composites, Compos. B Eng., 2016, 94, p 370–378 J. Nicholas, M. Mohamed, G. Dhaliwal, S. Anandan, and K. Chandrashekhara, Effects of Accelerated Environmental Aging on Glass Fiber Reinforced Thermoset Polyurethane Composites, Compos. B Eng., 2016, 94, p 370–378
25.
Zurück zum Zitat R.M. Bajracharya, A.C. Manalo, W. Karunasena, and K. Lau, Durability Characteristics and Property Prediction of Glass Fibre Reinforced Mixed Plastics Composites, Compos. B Eng., 2017, 116, p 16–29 R.M. Bajracharya, A.C. Manalo, W. Karunasena, and K. Lau, Durability Characteristics and Property Prediction of Glass Fibre Reinforced Mixed Plastics Composites, Compos. B Eng., 2017, 116, p 16–29
26.
Zurück zum Zitat A.P.C. Barbosa, A.P.P. Fulco, E.S. Guerra, F.K. Arakaki, M. Tosatto, M.C.B. Costa, and D.D. Jose, Accelerated Aging Effects on Carbon Fiber/Epoxy Composites, Compos. B Eng., 2017, 110, p 298–306 A.P.C. Barbosa, A.P.P. Fulco, E.S. Guerra, F.K. Arakaki, M. Tosatto, M.C.B. Costa, and D.D. Jose, Accelerated Aging Effects on Carbon Fiber/Epoxy Composites, Compos. B Eng., 2017, 110, p 298–306
27.
Zurück zum Zitat C. Atas, Bearing Strength of Pinned Joints in Woven Fabric Composites with Small Weaving Angles, Compos. Struct., 2009, 88(1), p 40–45 C. Atas, Bearing Strength of Pinned Joints in Woven Fabric Composites with Small Weaving Angles, Compos. Struct., 2009, 88(1), p 40–45
28.
Zurück zum Zitat A. Atas and C. Soutis, Strength Prediction of Bolted Joints in CFRP Composite Laminates Using Cohesive Zone Elements, Compos. B Eng., 2014, 58, p 25–34 A. Atas and C. Soutis, Strength Prediction of Bolted Joints in CFRP Composite Laminates Using Cohesive Zone Elements, Compos. B Eng., 2014, 58, p 25–34
29.
Zurück zum Zitat V. Mara, R. Haghani, and M. Al-Emrani, Improving the Performance of Bolted Joints in Composite Structures Using Metal Inserts, J. Compos. Mater., 2016, 50(21), p 3001–3018 V. Mara, R. Haghani, and M. Al-Emrani, Improving the Performance of Bolted Joints in Composite Structures Using Metal Inserts, J. Compos. Mater., 2016, 50(21), p 3001–3018
30.
Zurück zum Zitat I.K. Giannopoulos, D.D. Doroni, K.I. Kourousis, and M. Yasaee, Effects of Bolt Torque Tightening on the Strength and Fatigue Life of Airframe FRP Laminate Bolted Joints, Compos. B Eng., 2017, 125, p 19–26 I.K. Giannopoulos, D.D. Doroni, K.I. Kourousis, and M. Yasaee, Effects of Bolt Torque Tightening on the Strength and Fatigue Life of Airframe FRP Laminate Bolted Joints, Compos. B Eng., 2017, 125, p 19–26
31.
Zurück zum Zitat K.S. Chani, J. Saini, and H. Bhunia, Effect of Nanoclay and Bolt Preloads on the Strength of Bolted Joints in Glass Epoxy Nanocomposites, J. Braz. Soc. Mech. Sci. Eng., 2018, 40(4), p 184 K.S. Chani, J. Saini, and H. Bhunia, Effect of Nanoclay and Bolt Preloads on the Strength of Bolted Joints in Glass Epoxy Nanocomposites, J. Braz. Soc. Mech. Sci. Eng., 2018, 40(4), p 184
32.
Zurück zum Zitat U. Khashaba, T. Sebaey, and A. Selmy, Experimental Verification of a Progressive Damage Model for Composite Pinned-Joints with Different Clearances, Int. J. Mech. Sci., 2019, 152, p 481–491 U. Khashaba, T. Sebaey, and A. Selmy, Experimental Verification of a Progressive Damage Model for Composite Pinned-Joints with Different Clearances, Int. J. Mech. Sci., 2019, 152, p 481–491
33.
Zurück zum Zitat M. Kumar, J. Saini, and H. Bhunia, Investigations on the Strength of Mechanical Joints Prepared from Carbon Fiber Laminates with Addition of Carbon Nanotubes, J. Mech. Sci. Technol., 2020, 34(3), p 1–12 M. Kumar, J. Saini, and H. Bhunia, Investigations on the Strength of Mechanical Joints Prepared from Carbon Fiber Laminates with Addition of Carbon Nanotubes, J. Mech. Sci. Technol., 2020, 34(3), p 1–12
34.
Zurück zum Zitat D.K. Rathore, R.K. Prusty, D.S. Kumar, and B.C. Ray, Mechanical Performance of CNT-Filled Glass Fiber/Epoxy Composite in In-Situ Elevated Temperature Environments Emphasizing the Role of CNT Content, Compos. A Appl. Sci. Manufact., 2016, 84, p 364–376 D.K. Rathore, R.K. Prusty, D.S. Kumar, and B.C. Ray, Mechanical Performance of CNT-Filled Glass Fiber/Epoxy Composite in In-Situ Elevated Temperature Environments Emphasizing the Role of CNT Content, Compos. A Appl. Sci. Manufact., 2016, 84, p 364–376
35.
Zurück zum Zitat A. Stewart and E.P. Douglas, Accelerated Testing of Epoxy-FRP Composites for Civil Infrastructure Applications: Property Changes and Mechanisms of Degradation, Polym. Rev., 2012, 52(2), p 115–141 A. Stewart and E.P. Douglas, Accelerated Testing of Epoxy-FRP Composites for Civil Infrastructure Applications: Property Changes and Mechanisms of Degradation, Polym. Rev., 2012, 52(2), p 115–141
36.
Zurück zum Zitat A. Kumar, S. Commereuc, and V. Verney, Ageing of Elastomers: A Molecular Approach Based on Rheological Characterization, Polym. Degrad. Stabil., 2004, 85(2), p 751–757 A. Kumar, S. Commereuc, and V. Verney, Ageing of Elastomers: A Molecular Approach Based on Rheological Characterization, Polym. Degrad. Stabil., 2004, 85(2), p 751–757
37.
Zurück zum Zitat B.P. Jelle and T.N. Nilsen, Comparison of Accelerated Climate Ageing Methods of Polymer Building Materials by Attenuated Total Reflectance Fourier Transform Infrared Radiation Spectroscopy, Construct. Build. Mater., 2011, 25(4), p 2122–2132 B.P. Jelle and T.N. Nilsen, Comparison of Accelerated Climate Ageing Methods of Polymer Building Materials by Attenuated Total Reflectance Fourier Transform Infrared Radiation Spectroscopy, Construct. Build. Mater., 2011, 25(4), p 2122–2132
38.
Zurück zum Zitat N.L. Batista, M.C.M. de Faria, K. Iha, P.C. de Oliveira, and E.C. Botelho, Influence of Water Immersion and Ultraviolet Weathering on Mechanical and Viscoelastic Properties of Polyphenylene Sulfide-Carbon Fiber Composites, J. Thermoplast. Compos. Mater., 2015, 28(3), p 340–356 N.L. Batista, M.C.M. de Faria, K. Iha, P.C. de Oliveira, and E.C. Botelho, Influence of Water Immersion and Ultraviolet Weathering on Mechanical and Viscoelastic Properties of Polyphenylene Sulfide-Carbon Fiber Composites, J. Thermoplast. Compos. Mater., 2015, 28(3), p 340–356
39.
Zurück zum Zitat F. Awaja, B.M. Jin, G. Michael, Z. Shengnan, G.K. Chun, and J.P. Paul, Surface Molecular Degradation of Selected High-Performance Polymer Composites Under Low Earth Orbit Environmental Conditions, Polym. Degrad. Stab., 2011, 96(7), p 1301–1309 F. Awaja, B.M. Jin, G. Michael, Z. Shengnan, G.K. Chun, and J.P. Paul, Surface Molecular Degradation of Selected High-Performance Polymer Composites Under Low Earth Orbit Environmental Conditions, Polym. Degrad. Stab., 2011, 96(7), p 1301–1309
40.
Zurück zum Zitat N.L. Hancox, Thermal Effects on Polymer Matrix Composites: Part 1 Thermal Cycling, Mater. Des., 1998, 19(3), p 85–91 N.L. Hancox, Thermal Effects on Polymer Matrix Composites: Part 1 Thermal Cycling, Mater. Des., 1998, 19(3), p 85–91
41.
Zurück zum Zitat T. Shimokawa, H. Katoh, Y. Hamaguchi, S. Sanbongi, H. Mizuno, H. Nakamura, and H. Tamura, Effect of Thermal Cycling on Microcracking and Strength Degradation of High-Temperature Polymer Composite Materials for Use in Next-Generation SST Structures, J. Compos. Mater., 2002, 36(7), p 885–895 T. Shimokawa, H. Katoh, Y. Hamaguchi, S. Sanbongi, H. Mizuno, H. Nakamura, and H. Tamura, Effect of Thermal Cycling on Microcracking and Strength Degradation of High-Temperature Polymer Composite Materials for Use in Next-Generation SST Structures, J. Compos. Mater., 2002, 36(7), p 885–895
42.
Zurück zum Zitat Y.F. Niu, Y. Yang, S. Gao, and J.W. Yao, Mechanical Mapping of the Interphase in Carbon Fiber Reinforced Poly (ether-ether-ketone) Composites Using Peak Force Atomic Force Microscopy: Interphase Shrinkage under Coupled Ultraviolet and Hydro-Thermal Exposure, Polym. Test., 2016, 55(1), p 257–260 Y.F. Niu, Y. Yang, S. Gao, and J.W. Yao, Mechanical Mapping of the Interphase in Carbon Fiber Reinforced Poly (ether-ether-ketone) Composites Using Peak Force Atomic Force Microscopy: Interphase Shrinkage under Coupled Ultraviolet and Hydro-Thermal Exposure, Polym. Test., 2016, 55(1), p 257–260
43.
Zurück zum Zitat H.S. Wang, C.L. Hung, and F.K. Chang, Bearing Failure of Bolted Composite Joints Part I: Experimental Characterization, J. Compos. Mater., 1996, 30(12), p 1284–1313 H.S. Wang, C.L. Hung, and F.K. Chang, Bearing Failure of Bolted Composite Joints Part I: Experimental Characterization, J. Compos. Mater., 1996, 30(12), p 1284–1313
Metadaten
Titel
Performance of Mechanical Joints Prepared from Carbon-Fiber-Reinforced Polymer Nanocomposites under Accelerated Environmental Aging
verfasst von
Mohit Kumar
J. S. Saini
H. Bhunia
Publikationsdatum
28.10.2020
Verlag
Springer US
Erschienen in
Journal of Materials Engineering and Performance / Ausgabe 11/2020
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-020-05216-8

Weitere Artikel der Ausgabe 11/2020

Journal of Materials Engineering and Performance 11/2020 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.