Skip to main content
main-content

Tipp

Weitere Artikel dieser Ausgabe durch Wischen aufrufen

Erschienen in: WASSERWIRTSCHAFT 6/2016

01.06.2016 | Wasserbau

Planning and Design of Kemah Arch Dam in a Very Strong Seismic Region

verfasst von: Dr.-Ing. Chongjiang Du, Dr. Rolf Wilhelm, Dr. Roy Dungar, Mr. Merih Sakarya

Erschienen in: WASSERWIRTSCHAFT | Ausgabe 6/2016

Einloggen, um Zugang zu erhalten
share
TEILEN

Excerpt

The Kemah arch dam is situated in Turkey close to the Eurasian Seismic Zone, where the peak ground acceleration of a 2 500-year earthquake reaches to a value of 0.70g. In this paper, the planning and design of the arch dam are reported besides presentation of main features of the project. Based on the results of geological and geotechnical investigation including the karstic foundation, shape of the arch dam was optimized using the time-history approach to cope with the extraordinary seismic loading, and the stresses in the arch dam and foundation were analysed in each time step. Based on the determined tensile and compressive stresses, the required concrete classes were accordingly defined. …
Literatur
[1]
Zurück zum Zitat Bieniawski, Z. T.: Engineering rock mass classifications: A complete manual for engineers and geologists in mining, civil and petroleum engineering. New York: Wiley, 1989. Bieniawski, Z. T.: Engineering rock mass classifications: A complete manual for engineers and geologists in mining, civil and petroleum engineering. New York: Wiley, 1989.
[2]
Zurück zum Zitat Barton, N.; Lien, R.; Lunde, J.: Engineering classification of rock masses for the design of tunnel support. In: Rock Mechanics 6 (1974), Issue 4, pp.189–236. CrossRef Barton, N.; Lien, R.; Lunde, J.: Engineering classification of rock masses for the design of tunnel support. In: Rock Mechanics 6 (1974), Issue 4, pp.189–236. CrossRef
[3]
Zurück zum Zitat Marinos, P.; Hoek, E.: GSI: a geologically friendly tool for rock mass strength estimation. In: International Conference on Geotechnical and Geological Engineering, Melbourne, (2000), pp.1 422–1 446. Marinos, P.; Hoek, E.: GSI: a geologically friendly tool for rock mass strength estimation. In: International Conference on Geotechnical and Geological Engineering, Melbourne, (2000), pp.1 422–1 446.
[4]
Zurück zum Zitat Dungas, R.: Interactive shaping method used for the 226 m El Cajon arch dam. In: Proceedings of International Workshop on Arch Dams, Coimbra, Portugal, 1987. Dungas, R.: Interactive shaping method used for the 226 m El Cajon arch dam. In: Proceedings of International Workshop on Arch Dams, Coimbra, Portugal, 1987.
[5]
Zurück zum Zitat Kupfer, H. B.; Gerstle, K. H.: Behavior of concrete under biaxial stress. In: Journal of Engineering Mechanics Division, ASCE (1973). Kupfer, H. B.; Gerstle, K. H.: Behavior of concrete under biaxial stress. In: Journal of Engineering Mechanics Division, ASCE (1973).
[6]
Zurück zum Zitat Dungar, R.; Zakerzadeh, N.: Critical temperature loading in arch dams: a review of the Stucky-Derron formulation. In: International Journal of Dam Engineering 2 (1992), Issue 2. Dungar, R.; Zakerzadeh, N.: Critical temperature loading in arch dams: a review of the Stucky-Derron formulation. In: International Journal of Dam Engineering 2 (1992), Issue 2.
[7]
Zurück zum Zitat Amos, P.; Black, J.; Dungar, R.; Walker, J.: Utilizing the curved footprint of an 80 year old gravity dam to aid performance during extreme earthquakes, 2016 (to be published). Amos, P.; Black, J.; Dungar, R.; Walker, J.: Utilizing the curved footprint of an 80 year old gravity dam to aid performance during extreme earthquakes, 2016 (to be published).
Metadaten
Titel
Planning and Design of Kemah Arch Dam in a Very Strong Seismic Region
verfasst von
Dr.-Ing. Chongjiang Du
Dr. Rolf Wilhelm
Dr. Roy Dungar
Mr. Merih Sakarya
Publikationsdatum
01.06.2016
Verlag
Springer Fachmedien Wiesbaden
Erschienen in
WASSERWIRTSCHAFT / Ausgabe 6/2016
Print ISSN: 0043-0978
Elektronische ISSN: 2192-8762
DOI
https://doi.org/10.1007/s35147-016-0067-z

Weitere Artikel der Ausgabe 6/2016

WASSERWIRTSCHAFT 6/2016 Zur Ausgabe

OriginalPaper

Tagungen und Messen