nach oben

Journal of Intelligent Manufacturing

Erschienen in:

24.02.2017

Post-prognostics decision making in distributed MEMS-based systems

verfasst von: Haithem Skima, Christophe Varnier, Eugen Dedu, Kamal Medjaher, Julien Bourgeois

Erschienen in: Journal of Intelligent Manufacturing | Ausgabe 3/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this paper, the problem of using prognostics information of micro-electro-mechanical systems (MEMS) for post-prognostics decision in distributed MEMS-based systems is addressed. A strategy of post-prognostics decision is proposed and then implemented in a distributed MEMS-based conveying surface. The surface is designed to convey fragile and tiny micro-objects. The purpose is to use the prognostics results of the used MEMS in the form of remaining useful life to maintain as long as possible a good performance of the conveying surface. For that, a distributed algorithm for distributed decision making in dynamic conditions is proposed. In addition, a simulator to simulate the decision in the targeted system is developed. Simulation results show the importance of the post-prognostics decision to optimize the utilization of the system and improve its performance.

Vorheriger Artikel Detecting cyber-physical attacks in CyberManufacturing systems with machine learning methods

Nächster Artikel Combining SOM and evolutionary computation algorithms for RBF neural network training

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Asmai, S. A., Hussin, B., & Yusof, M. M. (2010). A framework of an intelligent maintenance prognosis tool. In 2010 second international conference on computer research and development, IEEE (pp. 241–245).

Balaban, E., & Alonso, J. J. (2012). An approach to prognostic decision making in the aerospace domain. In Annual conference of the prognostics and health management society (pp. 396–415).

Barros, A., Bérenguer, C., & Grall, A. (2003). Optimization of replacement times using imperfect monitoring information. IEEE Transactions on Reliability, 52(4), 523–533.CrossRef

Benkedjouh, T., Medjaher, K., Zerhouni, N., & Rechak, S. (2015). Health assessment and life prediction of cutting tools based on support vector regression. Journal of Intelligent Manufacturing, 26(2), 213–223.CrossRef

Besnard, F., & Bertling, L. (2010). An approach for condition-based maintenance optimization applied to wind turbine blades. IEEE Transactions on Sustainable Energy, 1(2), 77–83.CrossRef

Bogdanov, A., Chiu, S., Gökdere, L. U., & Vian, J. (2006). Stochastic optimal control of a servo motor with a lifetime constraint. In 2006 45th IEEE conference on decision and control, IEEE (pp. 4182–4187).

Bole, B., Tang, L., Goebel, K., & Vachtsevanos, G. (2011). Adaptive load-allocation for prognosis-based risk management. In Annual conference of the prognostics and health management society (pp. 1–10).

Boutoustous, K., Laurent, G. J., Dedu, E., Matignon, L., Bourgeois, J., & Fort-Piat, N. L. (2010). Distributed control architecture for smart surfaces. In IEEE/RSJ international conference on intelligent robots and systems (IROS) (Vol. 23, pp. 2018–2024). IEEE, Taipei.

Brezak, D., Majetic, D., Udiljak, T., & Kasac, J. (2012). Tool wear estimation using an analytic fuzzy classifier and support vector machines. Journal of Intelligent Manufacturing, 23(3), 797–809.CrossRef

Brown, D. W., Georgoulas, G., Bole, B., Pei, H. L., Orchard, M., & Tang, L., et al. (2009). Prognostics enhanced reconfigurable control of electro-mechanical actuators. In Annual conference of the prognostics and health management society (pp. 1–17). PHM Society Rochester, NY.

Camci, F., Valentine, G. S., & Navarra, K. (2007). Methodologies forintegration of PHM systems with maintenance data. Technical report, DTIC Document.

Chretien, S., Herr, N., Nicod, J. M., & Varnier, C. (2015). A post-prognostics decision approach to optimize the commitment of fuel cell systems in stationary applications. In 2015 IEEE conference on prognostics and health management (PHM), IEEE (pp. 1–7).

Dahroug, B., Laurent, G. J., Guelpa, V., & Fort-Piat, L., et al. (2015). Design, modeling and control of a modular contactless wafer handling system. In 2015 IEEE international conference on robotics and automation (ICRA), IEEE (pp 976–981).

Dijkstra, E. W. (1959). Communication with an automatic computer. Ph.D. thesis, University of Amsterdam.

Edmonds, J., & Karp, R. M. (1972). Theoretical improvements in algorithmic efficiency for network flow problems. Journal of the ACM (JACM), 19(2), 248–264.CrossRef

Elghazel, W., Medjaher, K., Zerhouni, N., Bahi, J., Farhat, A., Guyeux, C., & Hakem, M. (2015). Random forests for industrial device functioning diagnostics using wireless sensor networks. In 2015 IEEE aerospace conference, IEEE (pp. 1–9).

Ford, L. R., & Fulkerson, D. R. (1956). Maximal flow through a network. Canadian Journal of Mathematics, 8(3), 399–404.CrossRef

Fukuta, Y., Chapuis, Y. A., Mita, Y., & Fujita, H. (2006). Design, fabrication, and control of mems-based actuator arrays for air-flow distributed micromanipulation. Journal of Microelectromechanical Systems, 15(4), 912–926.CrossRef

Haddad, G., Sandborn, P., & Pecht, M. (2011). A real options optimization model to meet availability requirements for offshore wind turbines. In MFPT: The Applied Systems Health Management Conference, Virginia Beach, Virginia.

He, D., Li, R., & Bechhoefer, E. (2012). Stochastic modeling of damage physics for mechanical component prognostics using condition indicators. Journal of Intelligent Manufacturing, 23(2), 221–226.

Iyer, N., Goebel, K., & Bonissone, P. (2006). Framework for post-prognostic decision support. In 2006 IEEE aerospace conference, IEEE (pp. 10–pp).

Kirby, B. T., Ashley-Rollman, M., & Goldstein, S. C. (2011). Blinky blocks: A physical ensemble programming platform. In CHI’11 extended abstracts on human factors in computing systems (pp. 1111–1116). ACM, Vancouver.

Konishi, S., & Fujita, H. (1994). A conveyance system using air flow based on the concept of distributed micro motion systems. Journal of Microelectromechanical Systems, 3(2), 54–58.CrossRef

Kurokawa, H., Tomita, K., Kamimura, A., Kokaji, S., Hasuo, T., & Murata, S. (2008). Distributed self-reconfiguration of M-TRAN III modular robotic system. The International Journal of Robotics Research, 27(3–4), 373–386.CrossRef

Lakhlef, H., Mabed, H., & Bourgeois, J. (2014). An energy and memory-efficient distributed self-reconfiguration for modular sensor/robot networks. The Journal of Supercomputing, 69(2), 908–929.CrossRef

Lebold, M., & Thurston, M. (2001). Open standards for condition-based maintenance and prognostic systems. In Maintenance and reliability conference (MARCON) (pp. 6–9).

Lei, X., Sandborn, P., Bakhshi, R., Kashani-Pour, A., & Goudarzi, N. (2015). PHM based predictive maintenance optimization for offshore wind farms. In 2015 IEEE conference on prognostics and health management (PHM), IEEE (pp. 1–8).

Lewandowski, S. (2010). Shortest paths and negative cycle detection in graphs with negative weights. Technical report, University of Stuttgart.

Montgomery, N., Banjevic, D., & Jardine, A. K. (2012). Minor maintenance actions and their impact on diagnostic and prognostic CBM models. Journal of Intelligent Manufacturing, 23(2), 303–311.CrossRef

Mosallam, A., Medjaher, K., & Zerhouni, N. (2014). Data-driven prognostic method based on bayesian approaches for direct remaining useful life prediction. Journal of Intelligent Manufacturing 27(5), 1–12.

Saha, B., Goebel, K., Poll, S., & Christophersen, J. (2009). Prognostics methods for battery health monitoring using a bayesian framework. IEEE Transactions on Instrumentation and Measurement, 58(2), 291–296.CrossRef

Saha, B., Koshimoto, E., Quach, C. C., Hogge, E. F., Strom, T. H., Hill, B. L., Vazquez, S. L., & Goebel, K. (2011). Battery health management system for electric uavs. In 2011 IEEE aerospace conference, IEEE (pp. 1–9).

Salemi, B., Moll, M., & Shen, W. M. (2006). SUPERBOT: A deployable, multi-functional, and modular self-reconfigurable robotic system. In IEEE/RSJ international conference on intelligent robots and systems, Beijing, China (pp. 3636–3641).

Sandborn, P. (2005). A decision support model for determining the applicability of prognostic health management (PHM) approaches to electronic systems. In Proceedings of reliability and maintainability symposium (RAMS), Arlington, VA.

Skima, H., Dedu, E., Bourgeois, J., Varnier, C., & Medjaher, K. (2016a). Optimal path evolution in a dynamic distributed MEMS-based conveyor. In International conference on dependability and complex systems DepCoS-RELCOMEX (Vol. 11, pp. 395–408). Springer, AISC 470, Brunw, Poland.

Skima, H., Medjaher, K., Varnier, C., Dedu, E., & Bourgeois, J. (2016b). A hybrid prognostics approach for mems: From real measurements to remaining useful life estimation. Microelectronics Reliability, 65, 79–88.CrossRef

Tang, L., Hettler, E., Zhang, B., & DeCastro, J. (2011). A testbed for real-time autonomous vehicle PHM and contingency management applications. In Annual conference of the prognostics and health management society (pp. 1–11).

Vieira, R Jd A, Lietti, M., & Sanz-Bobi, M. A. (2012). New variable health threshold based on the life observed for improving the scheduled maintenance of a wind turbine. Advanced Maintenance Engineering, 2, 187–192.

Zhang, Z., Wang, Y., & Wang, K. (2013). Fault diagnosis and prognosis using wavelet packet decomposition, fourier transform and artificial neural network. Journal of Intelligent Manufacturing, 24(6), 1213–1227.CrossRef

Titel: Post-prognostics decision making in distributed MEMS-based systems
verfasst von: Haithem Skima
Christophe Varnier
Eugen Dedu
Kamal Medjaher
Julien Bourgeois
Publikationsdatum: 24.02.2017
Verlag: Springer US
Erschienen in: Journal of Intelligent Manufacturing / Ausgabe 3/2019
Print ISSN: 0956-5515
Elektronische ISSN: 1572-8145
DOI: https://doi.org/10.1007/s10845-017-1312-8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2019

Reduced order modelling based control of two wheeled mobile robot

Combining SOM and evolutionary computation algorithms for RBF neural network training

Leader-follower joint optimization problems in product family design

An integration model for generating and selecting product configuration plans

Selection of optimal conditions in the surface grinding process using the quantum based optimisation method

Automatic inspection of salt-and-pepper defects in OLED panels using image processing and control chart techniques

Premium Partner

Marktübersichten