nach oben

Erschienen in:

2016 | OriginalPaper | Buchkapitel

15. Potential Applications and Prospects

verfasst von : Jien-Wei Yeh, An-Chou Yeh, Shou-Yi Chang

Erschienen in: High-Entropy Alloys

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

High-entropy alloys (HEAs) inherently have four core effects that enable improvement in microstructure and properties. During the course of research on HEAs, other special materials, such as high-entropy (HE) superalloys, HE refractory alloys, HE bulk metallic glasses, HE carbides, HE nitrides, and HE oxides, have also been developed. All these materials have promising potential applications, e.g., in fabricating machine components, dies and molds, corrosion-resistant parts, cutting tools, functional coatings, hard-facing, thin-film resistors, diffusion barriers, and high-temperature structural components. Greater understanding of the basic science, accumulated knowledge and experience, and effective simulation and modeling will lead to the successful development of numerous HE materials with better properties in the future. This chapter first addresses several important high-entropy materials with promising potential applications and finally forecasts the trends and prospects in their research and development.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel High-Entropy Coatings

Sims CT, Stoloff NS, Hagel WC (1987) Superalloys II. Wiley, New York

Reed RC (2006) The superalloys: fundamentals and applications. Cambridge University Press, CambridgeCrossRef

Reed RC, Tao T, Warnken N (2009) Alloys-by-design: application to nickel-based single crystal superalloys. Acta Mater 57:5898–5913CrossRef

Walston S, Cetel A, MacKay R, O’Hara KS, Duhl D, Dreshfield R (2004) Joint development of a fourth generation single crystal superalloy. In: Green KA (ed) Proceedings of Superalloys 2004, (The 10th international symposium on superalloys, champion, Pennsylvania, USA). TMS (The Minerals, Metals & Materials Society), pp 15–24

Zhang JX, Murakumo T, Koizumi Y, Kobayashi T, Harada H, Masaki S (2002) Interfacial dislocation networks strengthening a fourth-generation single-crystal TMS138 superalloy. Metall Mater Trans A 33:3741–3746CrossRef

Frasier DJ, Whetstone JR, Harris K, Erickson GL, Schwer RE (1990) Process and alloy optimization for CMSX-4 superalloy single crystal airfoil. In: High temperature materials for power engineering. Kluwer, Dordrecht, pp 1281–1300

Reed RC, Yeh AC, Tin S, Babu SS, Miller MK (2004) Identification of the partitioning characteristics of ruthenium in single crystal superalloys using atom probe tomography. Scr Mater 51:327–331CrossRef

Yeh AC, Tin S (2005) Effects of Ru and Re additions on the high temperature flow stresses of Ni-base single crystal superalloys. Scr Mater 52:519–524CrossRef

Yeh AC, Tin S (2006) Effects of Ru on the high-temperature phase stability of Ni-base single-crystal superalloys. Metall Mater Trans A 37:2621–2631CrossRef

10.

Yeh AC, Sato A, Kobayashi T, Harada H (2008) On the creep and phase stability of advanced Ni-base single crystal superalloys. Mater Sci Eng A 490:445–451CrossRef

11.

Kawagishi K, Sato A, Harada H, Yeh AC, Koizumi Y, Kobayashi T (2009) Oxidation resistant Ru containing Ni base single crystal superalloys. Mater Sci Technol 25:271–275CrossRef

12.

Kawagishi K, Yeh AC, Yokokawa T, Kobayashi T, Koizumi Y, Harada H (2012) Development of an oxidation-resistant high-strength sixth-generation single-crystal superalloy TMS-238. In: Huron ES (ed) Proceedings of Superalloys 2012 (The 12th international symposium on superalloys). Wiley, New York, pp 189–195

13.

Yeh AC, Chang YJ, Tsai CW, Wang YC, Yeh JW, Kuo CM (2014) On the solidification and phase stability of a Co-Cr-Fe-Ni-Ti high-entropy alloy. Metall Mater Trans A 45:184–190CrossRef

14.

Azadian S, Wei LY, Warren R (2004) Delta phase precipitation in Inconel 718. Mater Charact 53:7–16CrossRef

15.

Smith GD, Patel SJ (2005) The role of niobium in wrought precipitation-hardened nickel-base alloys. In: Loria EA (ed) Proceedings of The 6th international superalloys symposium: superalloys 718, 625, 706 and derivatives 2005, champion, Pennsylvania, USA. TMS, pp 135–154

16.

Shibata T, Shudo Y, Yoshino Y (1996) Effects of aluminum, titanium and niobium on the time-temperature-precipitation behavior of alloy 706. In: Kissinger RD (ed) Proceedings of superalloys 1996 (The 8th international symposium on superalloys, champion, Pennsylvania, USA). TMS, pp 153–162

17.

Yeh AC, Yang KC, Yeh JW, Kuo CM (2014) Developing an advanced Si-bearing DS Ni-base superalloy. J Alloys Compd 585:614–621CrossRef

18.

Chang YJ, Yeh JW, Yeh AC (2014) High-entropy superalloys. Doctoral thesis in progress, National Tsing Hua University, Taiwan

19.

Tsao TK, Yeh JW (2014) On high entropy effect and sluggish diffusion effect of high-entropy alloys. Doctoral thesis, National Tsing Hua University, Taiwan

20.

Hobbs RA, Tin S, Rae CMF (2005) A castability model based on elemental solid–liquid partitioning in advanced nickel-base single-crystal superalloys. Metall Mater Trans A 36:2761–2773CrossRef

21.

Wills VA, McCartney DG (1991) A comparative study of solidification features in nickel-base superalloys: microstructural evolution and microsegregation. Mater Sci Eng A 145:223–232CrossRef

22.

Tin S, Pollock TM (2004) Predicting freckle formation in single crystal Ni-base superalloys. J Mater Sci 39:7199–7205CrossRef

23.

Webster GA, Sullivan CP (1967) Some of temperature cycling on the creep behaviour of nickel-base alloy. J Inst Met 95:138–142

24.

Tien JK, Gamble RP (1972) Effects of stress coarsening on coherent particle strengthening. Metall Trans 3:2157–2162CrossRef

25.

Mackay RA, Ebert LJ (1983) The development of directional coarsening of the γ′ precipitate in superalloy single crystals. Scr Mater 17:1217–1222

26.

Ichitsubo T, Koumoto D, Hirao M, Tanaka K, Osawa M, Yokohawa T, Harada H (2003) Rafting mechanism for Ni-base superalloy under external stress: elastic or elastic-plastic phenomena? Acta Mater 51:4033–4044CrossRef

27.

Serin K, Gobenli G, Eggeler G (2004) On the influence of stress state, stress level and temperature on γ-channel widening in the single crystal superalloy CMSX-4. Mater Sci Eng A 387:133–137CrossRef

28.

Nabarro FRN, Cress CM, Kotschy P (1996) The thermodynamic driving force for rafting in superalloys. Acta Mater 44:3189–3198CrossRef

29.

Nabarro FRN (1996) Rafting in superalloys. Metall Mater Trans A 27:513–530CrossRef

30.

Laberge CA, Fratzl P, Lebowitz JL (1997) Microscopic model for directional coarsening of precipitates in alloys under external load. Acta Mater 45:3949–3962CrossRef

31.

Svoboda J, Lukas P (1996) Modelling of kinetics of directional coarsening in Ni-superalloys. Acta Mater 44:2557–2565CrossRef

32.

Tien JK, Copley SM (1971) The effect of orientation and sense of applied uniaxial stress on the morphology of coherent gamma prime precipitates in stress annealed nickel-base superalloy crystals. Metall Trans 2:543–553CrossRef

33.

Zhang JX, Wang JC, Harada H, Koizumi Y (2005) The effect of lattice misfit on the dislocation motion in superalloys during high-temperature Low-stress creep. Acta Mater 53:4623–4633CrossRef

34.

Zhang JX, Murakumo T, Harada H, Koizumi Y (2003) Dependence of creep strength on the interfacial dislocations in a fourth generation SC superalloy TMS-138. Scr Mater 48:287–293CrossRef

35.

Senkov ON, Wilks GB, Miracle DB, Chuang CP, Liaw PK (2010) Refractory high-entropy alloys. Intermetallics 18:1758–1765CrossRef

36.

Senkov ON, Wilks GB, Scott JM, Miracle DB (2011) Mechanical properties of Nb₂₅Mo₂₅Ta₂₅W₂₅ and V₂₀Nb₂₀Mo₂₀Ta₂₀W₂₀ refractory high entropy alloys. Intermetallics 19:698–706CrossRef

37.

Senkov ON, Scott JM, Senkova SV, Miracle DB, Woodward CF (2011) Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy. J Alloys Compd 509:6043–6048CrossRef

38.

Zhu G, Liu Y, Ye JW (2014) Early high-temperature oxidation behavior of Ti(C, N)-based cermets with multi-component AlCoCrFeNi high-entropy alloy binder. Int J Refract Met Hard Mater 44:35–41CrossRef

39.

Zhang Y, Zuo TT, Tang Z, Gao MC, Dahmen KA, Liaw PK, Lu ZP (2014) Microstructures and properties of high-entropy alloys. Prog Mater Sci 61:1–93CrossRef

40.

Couzinié JP, Dirras G, Perrière L, Chauveau T, Leroy E, Champion Y, Guillot I (2014) Microstructure of a near-equimolar refractory high-entropy alloy. Mater Lett 126:285–287CrossRef

41.

Senkov ON, Scott JM, Senkova SV, Meisenkothen F, Miracle DB, Woodward CF (2012) Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy. J Mater Sci 47:4062–4074CrossRef

42.

Senkov ON, Senkova S, Miracle DB, Woodward C (2013) Mechanical properties of Low-density, refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system. Mater Sci Eng A 565:51–62CrossRef

43.

Senkov ON, Senkova S, Woodward C, Miracle DB (2013) Low-density, refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system: microstructure and phase analysis. Acta Mater 61:1545–1557CrossRef

44.

Yang X, Zhang Y, Liaw PK (2012) Microstructure and compressive properties of NbTiVTaAlx high entropy alloys. Procedia Eng 36:292–298CrossRef

45.

Senkov ON, Senkova SV, Woodward C (2014) Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys. Acta Mater 68:214–228CrossRef

46.

Senkov ON, Woodward C, Miracle DB (2014) Microstructure and properties of aluminum-containing refractory high-entropy alloys. JOM 66:2030–2042CrossRef

47.

Zhang B, Gao MC, Zhang Y, Yang S, Guo SM (2015) Senary refractory high-entropy alloy MoNbTaTiVW. Mater Sci Tech 31:1207–1213

48.

Chen CS, Yang CC, Chai HY, Yeh JW, Chau JLH (2014) Novel cermet material of WC/multi-element alloy. Int J Refract Hard Met 43:200–204CrossRef

49.

Lin CM, Tsai CW, Huang SM, Yang CC, Yeh JW (2014) New TiC/Co_1.5CrFeNi_1.5Ti_0.5 cermet with slow TiC coarsening during sintering. JOM 66:2050–2056CrossRef

50.

Chou YL, Yeh JW, Shih HC (2011) Effect of molybdenum on the pitting resistance of Co_1.5CrFeNi_1.5Ti_0.5Mo_x alloys in chloride solutions. Corrosion 67:085002

51.

Chuang MH, Tsai MH, Wang WR, Lin SJ, Yeh JW (2011) Microstructure and wear behavior of Al_xCo_1.5CrFeNi_1.5Ti_y high-entropy alloys. Acta Mater 59:6308–6317CrossRef

52.

Huang PK, Yeh JW, Shun TT, Chen SK (2004) Multi-principal-element alloys with improved oxidation and wear resistance for thermal spray coating. Adv Eng Mater 6:74–78CrossRef

53.

Yeh JW, Chen SK, Lin SJ, Gan JY, Chin TS, Shun TT, Tsau CH, Chang SY (2004) Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes. Adv Eng Mater 6:299–303CrossRef

54.

Hsu CY, Yeh JW, Chen SK, Shun TT (2004) Wear resistance and high-temperature compression strength of Fcc CuCoNiCrA_l0.5Fe alloy with boron addition. Metall Mater Trans A 35:1465–1469CrossRef

55.

Cantor B, Chang ITH, Knight P, Vincent AJB (2004) Microstructural development in equiatomic multicomponent alloys. Mater Sci Eng A 375–377:213–218CrossRef

56.

Yeh JW, Chen SK, Gan JY, Lin SJ, Chin TS, Shun TT, Tsau CH, Chang SY (2004) Formation of simple crystal structures in Cu-Co-Ni-Cr-Al-Fe-Ti-V alloys with multiprincipal metallic elements. Metall Mater Trans A 35:2533–2536CrossRef

57.

Chen TK, Shun TT, Yeh JW, Wong MS (2004) Nanostructured nitride films of multi-element high-entropy alloys by reactive DC sputtering. Surf Coat Technol 188–189:193–200CrossRef

58.

Lai CH, Lin SJ, Yeh JW, Chang SY (2006) Preparation and characterization of AlCrTaTiZr multi-element nitride coatings. Surf Coat Technol 201:3275–3280CrossRef

59.

Lai CH, Lin SJ, Yeh JW, Davison A (2006) Effect of substrate bias on the structure and properties of multi-element (AlCrTaTiZr)N coatings. J Phys D Appl Phys 39:4628–4633CrossRef

60.

Huang PK, Yeh JW (2010) Inhibition of grain coarsening up to 1000°C in (AlCrNbSiTiV)N superhard coatings. Scr Mater 62:105–118CrossRef

61.

Huang PK, Yeh JW (2009) On high-entropy alloy and nitride coatings sputtered from AlCrNbSiTiV target. Doctoral thesis, National Tsing Hua University, Taiwan

62.

Chang SY, Chen MK, Chen DS (2009) Multiprincipal-element AlCrTaTiZr-nitride nanocomposite film of extremely high thermal stability as diffusion barrier for Cu metallization. J Electrochem Soc 156:G37–G42CrossRef

63.

Kaloyeros AE, Eisenbraun E (2000) Ultrathin diffusion barriers/liners for gigascale copper metallization. Annu Rev Mater Sci 30:363–385CrossRef

64.

Kouno T, Niwa H, Yamada M (1998) Effect of TiN microstructure on diffusion barrier properties in Cu metallization. J Electrochem Soc 145:2164–2167CrossRef

65.

Alén P, Ritala M, Arstila K, Keinonen J, Leskelä M (2005) Atomic layer deposition of molybdenum nitride thin films for Cu metallizations. J Electrochem Soc 152:G361–G366CrossRef

66.

Kwon SH, Kwon OK, Min JS, Kang SW (2006) Plasma-enhanced atomic layer deposition of Ru-TiN thin films for copper diffusion barrier metals. J Electrochem Soc 153:G578–G584CrossRef

67.

Chen CW, Chen JS, Jeng JS (2008) Improvement on the diffusion barrier performance of reactively sputtered Ru-N film by incorporation of Ta. J Electrochem Soc 155:H438–H442CrossRef

68.

Fang JS, Lin JH, Chen BY, Chin TS (2011) Ultrathin Ru-Ta-C barriers for Cu metallization. J Electrochem Soc 158:H97–H102CrossRef

69.

Leu LC, Norton DP, McElwee L, Anderson TJ (2008) Ir/TaN as a bilayer diffusion barrier for advanced Cu interconnects. Appl Phys Lett 92:111917CrossRef

70.

Xie Q, Jiang YL, Musschoot J, Deduytsche D, Detavernier C, Vanmeirhaeghe R, Van den Berghe S, Ru GP, Li BZ, Qu XP (2009) Ru thin film grown on TaN by plasma enhanced atomic layer deposition. Thin Solid Films 517:4689–4693CrossRef

71.

Kim SH, Kim HT, Yim SS, Lee DJ, Kim KS, Kim HM, Kim KB, Sohn HC (2008) A bilayer diffusion barrier of ALD-Ru/ALD-TaCN for direct plating of Cu. J Electrochem Soc 155:H589–H594CrossRef

72.

Tsai MH, Wang CW, Tsai CW, Shen WJ, Yeh JW, Gan JY, Wu WW (2011) Thermal stability and performance of NbSiTaTiZr high-entropy alloy barrier for copper metallization. J Electrochem Soc 158:H1161–H1165CrossRef

73.

Chang SY, Wang CY, Chen MK, Li CE (2011) Ru incorporation on marked enhancement of diffusion resistance of multi-component alloy barrier layers. J Alloy Compd 509:L85–L89CrossRef

74.

Chang SY, Chen DS (2009) 10 nm-thick quinary (AlCrTaTiZr)N film as effective diffusion barrier for Cu interconnects at 900°C. Appl Phys Lett 94:231909CrossRef

75.

Chang SY, Wang CY, Li CE, Huang YC (2011) 5 nm-thick (AlCrTaTiZrRu)N_0.5 multi-component barrier layer with high diffusion resistance for Cu interconnects. Nanosci Nanotechnol Lett 3:289–293CrossRef

76.

Chang SY, Chen DS (2010) Ultrathin (AlCrTaTiZr) Nx/AlCrTaTiZr bilayer structures with high diffusion resistance for Cu interconnects. J Electrochem Soc 157:G154–G159CrossRef

77.

Chang SY, Li CE, Chiang SC, Huang YC (2012) 4-nm thick multilayer structure of multi-component (AlCrRuTaTiZr)N_x as robust diffusion barrier for Cu interconnects. J Alloy Compd 515:4–7CrossRef

78.

Chang SY, Li CE, Huang YC, Hsu HF, Yeh JW, Lin SJ (2014) Structural and thermodynamic factors of suppressed interdiffusion kinetics in multi-component high-entropy materials. Sci Rep 4:4162

79.

Egami T, Guo W, Rack PD, Nagase T (2014) Irradiation resistance of multicomponent alloys. Metall Mater Trans A 45:180–183CrossRef

80.

Nagase T, Anada S, Rack PD, Noh JH, Yasuda H, Mori H, Egami T (2013) MeV electron-irradiation-induced structural change in the BCC phase of Zr–Hf–Nb alloy with an approximately equiatomic ratio. Intermetallics 38:70–79CrossRef

81.

Nagase T, Rack PD, Noh JH, Egami T (2015) In-situ TEM observation of structural changes in nano-crystalline CoCrCuFeNi multicomponent High-Entropy Alloy (HEA) under fast electron irradiation by high voltage electron microscopy (HVEM). Intermetallics 59:32–42CrossRef

82.

Otto F, Yang Y, Bei H, George EP (2013) Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys. Acta Mater 61:2628–2638CrossRef

83.

Tsai KY, Tsai MH, Yeh JW (2013) Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys. Acta Mater 61:4887–4897CrossRef

84.

Otto F, Dlouhy A, Somsen C, Bei H, Eggeler G, George EP (2013) The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy. Acta Mater 61:5743–5755CrossRef

85.

Feuerbacher M, Heidelmann M, Thomas C (2015) Hexagonal high-entropy alloys. Mater Res Lett 3:1–6CrossRef

86.

Gao MC, Alman DE (2013) Searching for next single-phase high-entropy alloy compositions. Entropy 15:4504–4519. doi:10.3390/e15104504 CrossRef

87.

Gao MC, Zhang B, Guo SM, Qiao JW, Hawk JA (2015) High-entropy alloys in hexagonal close-packed structure. Metall Mater Trans A, doi: 10.1007/s11661-015-3091-1

Titel: Potential Applications and Prospects
verfasst von: Jien-Wei Yeh
An-Chou Yeh
Shou-Yi Chang
Verlag: Springer International Publishing
Buch: High-Entropy Alloys
Print ISBN: 978-3-319-27011-1

Electronic ISBN: 978-3-319-27013-5

Copyright-Jahr: 2016
DOI: https://doi.org/10.1007/978-3-319-27013-5_15

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht