nach oben

Erschienen in:

07.08.2024

Potential of controlling the steel-making process in electric arc steel-making furnaces to optimize technical and economic performance

verfasst von: A. P. Lyulyakin, A. B. Tverskoy, A. V. Zezyulin, M. P. Gusev, V. V. Sedukhin, M. E. Matvenov, I. Yu. Gavrilov

Erschienen in: Metallurgist | Ausgabe 4/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The article describes modern methods for controlling and optimizing the energy mode of melting in electric arc furnaces and units for out-of-furnace steel processing using optical emission spectroscopy systems. These systems enable the determination of melt and slag temperatures, plasma temperatures in the arc combustion area, and slag composition, as well as the analysis of emission intensity from the melt and slag surfaces. The analysis revealed that depending on the range of steel to be smelted and the peculiarities of smelting technology at a particular electric arc steel-making furnace, control systems for smelting monitoring can be developed according to the obtained indicators of one or a combination of the abovementioned parameters.

Nächster Artikel New experience: increasing the durability of converter lining

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Volkodaev AN, Evseeva NV, Tokovoy OK (2000) Using the amplitudes of higher harmonics in the arc voltage of a high-power arc furnace to control the energy technological process. Stal (2):24–27

Sysolin AV, Nekrasov IV, Sheshukov OY, Lutsenko VT, Gulyakov VS (2008) The influence of the chemical composition of slag on the electrical mode of steel melting in an alternating current arc furnace. In: Structure and properties of metal and slag melts, proceedings of the XII Russian conference, v. 3. Experimental study of slag melts; metal-slag interaction, Yekaterinburg, ural branch of the Russian academy of sciences, pp 98–101

Nekrasov IV, Sheshukov OY, Sysolin AV, Lutsenko VT, Bondarenko VN (2009) Automatic control of slag composition during steel processing on ladle-furnace units based on electrical mode parameters. Izv Vyssh Ucheb Zav Chern Metall 10:18–21

Egiazaryan DK (2012) Method for controlling steel refining in a ladle-furnace unit according to the parameters of the electrical mode. Molod Uchen 12(47):55–60

On-line slag composition analysis for electric arc furnaces, state of the art. https://www.iob.rwth-aachen.de/files/pub/RFCS%20OSCANEAF%20State%20of%20the%20Art%20. Accessed 21 July 2023

Konuk AR, Aarts RGKM, Huisin’t VAJ, Sibillano T, Rizzi D, Ancona A (2011) Process control of stainless steel laser welding using an optical spectroscopy sensor. Phys Procedia 12:744–751. https://doi.org/10.1016/j.phpro.2011.03.093CrossRef

Stojadinović S, Jovović J, Petković M, Vasilić R, Konjević N (2011) Spectroscopic and real-time imaging investigation of tantalum plasma electrolytic oxidation. Surf Coat Technol 205(23–24):5406–5413CrossRef

Chiba K, Ono A, Saeki M, Yamauchi M, Kanamoto M, Ohno T (1993) Development of direct analysis method for molten iron in converter: hotspot radiation spectrometry. Iron Steel 20(3):215–220

Gruber J, Heitz J, Arnold N, Däuerle D, Ramaseder N, Meyer W, Hochörtler J, Koch F (2004) In situ analysis of metal melts in metallurgic vacuum device by laser-induced breakdown spectroscopy. Appl Spectr 58(4):457–462. https://doi.org/10.1366/000370204773580310CrossRef

10.

Aula M, Mäkinen A, Fabritius T (2013) Analysis of arc emission spectra of stainless steel electric arc furnace slag affected by fluctuating arc voltage. Appl Spectrosc 68:26–32CrossRef

11.

Aula M, Mäkinen A, Leppänen A, Huttula M, Fabritius T (2015) Optical emission analysis of slag surface conditions and furnace atmosphere during different process stages in electric arc furnace (EAF). ISIJ International 8:1702–1710CrossRef

12.

Pauna H (2020) Electric arc characterization and furnace process monitoring with optical emission spectroscopy and image analysis. Proc Met Res Un: Rept Ser Phys Sci 136(89)

13.

Aula M, Leppanen A, Roininen J, Heikkinen E‑P, Vallo K, Fabritius T, Huttula M (2014) Characterization of process conditions in industrial stainless steelmaking electric arc furnace using optical emission spectrum measurements. Met Mater Trans B 45:839–849. https://doi.org/10.1007/s11663-014-0032-0CrossRef

14.

Aragon C, Aguilera JA (2008) Characterization of laser induced plasma by optical emission spectroscopy: a review of experiments and methods. Spectroch Acta Part B 63:893–916. https://doi.org/10.1016/j.sab.2008.05.010CrossRef

15.

Pauna H, Aula M, Seehausen J, Klung J‑S, Huttula M, Fabritius T (2020) Optical emission spectroscopy as an online analysis method in industrial electric arc furnaces. Steel Res Int 91(11):2000051. https://doi.org/10.1002/srin.202000051CrossRef

16.

Guo M, Durinck D, Jones PT, Heylen G, Hendrickx R, Baeten R, Blanpain B, Woilants P (2007) EAF stainless steel refining. Part I: observational study on chromium recovery in an eccentric bottom tapping furnace and a spout tapping furnace. Steel Res Int 78(2):127–134. https://doi.org/10.1002/srin.200705868CrossRef

17.

Sturm V, Fleige R, Kanter M, Leitner R (2014) Laser-induced breakdown spectroscopy for 24/7 automatic liquid slag analysis at a steel works. Anal Chem 86(19):9687–9692. https://doi.org/10.1021/ac5022425CrossRefPubMed

18.

Matsuura N, Fruehan R (2009) Slag foaming in an electric arc furnace. ISIJ Intern 49(10):1530–1535. https://doi.org/10.2355/isijinternation-al.49.1530CrossRef

19.

Aula M, Demus T, Echterhof T, Huttula M (2017) On-line analysis of Cr₂O₃ content of the slag in pilot scale eaf by measuring optical emission spectrum of electric arc. ISIJ Intern 57(3):478–486. https://doi.org/10.2355/isijinternational.ISIJINT-2015-677CrossRef

20.

Cornacchia G, Agnelli S, Gelfi M, Ramorino G, Roberti R (2015) Reuse of EAF slag as reinforcing filler for polypropylene matrix composites. J Min Met Mater Soc 67(6):1370–1378CrossRef

Titel: Potential of controlling the steel-making process in electric arc steel-making furnaces to optimize technical and economic performance
verfasst von: A. P. Lyulyakin
A. B. Tverskoy
A. V. Zezyulin
M. P. Gusev
V. V. Sedukhin
M. E. Matvenov
I. Yu. Gavrilov
Publikationsdatum: 07.08.2024
Verlag: Springer US
Erschienen in: Metallurgist / Ausgabe 4/2024
Print ISSN: 0026-0894
Elektronische ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-024-01750-1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2024

Influence of layer-by-layer surfacing with object additive formation on AMg5 alloy structure and properties

Comparison of characteristics of VZHL718 alloy metal powder compositions produced by prep and viga methods after selective laser melting

Effect of modifying additives of dysprosium titanate on the structure of silumin AK12

Study of the possibility of processing hbi sludges in electrometallurgical units

Influence of air temperature and humidity on the corrosion of cobalt

Behavior of As, Pb, Cu, and Zn under conditions of reduction roasting of fine dust generated by a copper smelter with natural gas

Marktübersichten