Skip to main content

2012 | OriginalPaper | Buchkapitel

2. Power Package Electrical Isolation Design

verfasst von : Yong Liu

Erschienen in: Power Electronic Packaging

Verlag: Springer New York

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Power Electronics packaging consists of power semiconductor devices, power integrated circuits, sensors, and protection circuits for a wide range of power electronics applications (Trends in analog and power packaging, 2009; Challenges of power electronic packaging and modeling, 2011; Mixed-signal and power-integration packaging solutions, 2010), such as inverters for motor drives and converters for power processing equipment. Integration in power electronics is a rather complex process due to incompatibility of materials and processing methods used in fabrication, and due to the high electrical density levels and electrical isolation requirements these components must handle. Packaging involves the solution of electrical, mechanical, and thermal problems. Electrical isolation is one of the important factors to be considered in the power packaging design, as it relates directly to the product reliability and safety. Based on the standard of International Electrotechnical Commission (IEC) and the US Standard (UL), such as the standard IEC60950-1 (Information technology equipment-safety, part 1: general requirements, 2005) and UL60950-1 (Information technology equipment-safety, part 1: general requirements, 2007), designers shall take into account not only the normal operating conditions of the equipment but also likely fault conditions, consequential faults, foreseeable misuse, and external influences such as temperature, altitude, pollution, moisture, overvoltages in a system that use the power packaging products. This chapter discusses the power package electrical isolation design considerations.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Kinzer D (2009) Trends in analog and power packaging. In: EuroSimE 2009, Delft Kinzer D (2009) Trends in analog and power packaging. In: EuroSimE 2009, Delft
2.
Zurück zum Zitat Liu Y, Kinzer D (2011) Challenges of power electronic packaging and modeling. In: EuroSimE 2011, Linz, Austria (Keynote) Liu Y, Kinzer D (2011) Challenges of power electronic packaging and modeling. In: EuroSimE 2011, Linz, Austria (Keynote)
3.
Zurück zum Zitat Gillberg J (2010) Mixed-signal and power-integration packaging solutions. In: EE Times (Design), 12 May 2010 Gillberg J (2010) Mixed-signal and power-integration packaging solutions. In: EE Times (Design), 12 May 2010
4.
Zurück zum Zitat Standard IEC60950-1 (2005) Information technology equipment-safety, part 1: general requirements, Ed.2.0 Standard IEC60950-1 (2005) Information technology equipment-safety, part 1: general requirements, Ed.2.0
5.
Zurück zum Zitat Standard UL60950-1 (2007) Information technology equipment-safety, part 1: general requirements, Ed.2.0 Standard UL60950-1 (2007) Information technology equipment-safety, part 1: general requirements, Ed.2.0
6.
Zurück zum Zitat Standard IEC60664-1 (2007) Insulation coordination for equipment within low-voltage systems, part 1: principles, requirements and tests Standard IEC60664-1 (2007) Insulation coordination for equipment within low-voltage systems, part 1: principles, requirements and tests
7.
Zurück zum Zitat Standard UL 746C (2003) Polymeric materials—use in electrical equipment evaluations Standard UL 746C (2003) Polymeric materials—use in electrical equipment evaluations
8.
Zurück zum Zitat Standard IEC 60335-1 (2010) Household and similar electrical appliances—safety, part 1: general requirements, Ed.5.0 Standard IEC 60335-1 (2010) Household and similar electrical appliances—safety, part 1: general requirements, Ed.5.0
9.
Zurück zum Zitat Standard IEC 60335-2-90 (2006) Household and similar electrical appliances—safety, part 2-90: particular requirements for commercial microwave ovens, Ed.3.0 Standard IEC 60335-2-90 (2006) Household and similar electrical appliances—safety, part 2-90: particular requirements for commercial microwave ovens, Ed.3.0
10.
Zurück zum Zitat Standard IEC 60598-1 (2003) luminaires, part 1: general requirements and tests Standard IEC 60598-1 (2003) luminaires, part 1: general requirements and tests
11.
Zurück zum Zitat Standard IEC 60598-2-20 (2010) Luminaires, part 2-particular requirements, section 20: lighting chains, Ed.3.0 Standard IEC 60598-2-20 (2010) Luminaires, part 2-particular requirements, section 20: lighting chains, Ed.3.0
12.
Zurück zum Zitat Standard IEC 60601-1-2 (2007) Medical electrical equipment, part 1–2: general requirements for basic safety and essential performance-collateral standard: electromagnetic compatibility requirements and tests, Ed.3.0 Standard IEC 60601-1-2 (2007) Medical electrical equipment, part 1–2: general requirements for basic safety and essential performance-collateral standard: electromagnetic compatibility requirements and tests, Ed.3.0
13.
Zurück zum Zitat Standard IEC 61010-1 (2010) Medical electrical equipment, part 1: general requirements for basic safety and essential performance, Ed.3.0 Standard IEC 61010-1 (2010) Medical electrical equipment, part 1: general requirements for basic safety and essential performance, Ed.3.0
14.
Zurück zum Zitat Standard IEC 61204-7 (2006) Low voltage power supplies, d.c. output, part 7: safety requirements Standard IEC 61204-7 (2006) Low voltage power supplies, d.c. output, part 7: safety requirements
15.
Zurück zum Zitat Standard IEC 61800-5-1 (2007) Adjustable speed electrical power driver systems, part 5–1: safety requirements-Electrical, thermal and energy, Ed.2.0 Standard IEC 61800-5-1 (2007) Adjustable speed electrical power driver systems, part 5–1: safety requirements-Electrical, thermal and energy, Ed.2.0
16.
Zurück zum Zitat Standard UL-840 (2000) Insulation coordination including clearances and creepage distances for electrical equipment Standard UL-840 (2000) Insulation coordination including clearances and creepage distances for electrical equipment
17.
Zurück zum Zitat Standard UL508C (2002) Standard for power conversion equipment Standard UL508C (2002) Standard for power conversion equipment
18.
Zurück zum Zitat Standard EN 60335-1 (2002) Household and similar electrical appliances—safety, part 1: general requirements Standard EN 60335-1 (2002) Household and similar electrical appliances—safety, part 1: general requirements
Metadaten
Titel
Power Package Electrical Isolation Design
verfasst von
Yong Liu
Copyright-Jahr
2012
Verlag
Springer New York
DOI
https://doi.org/10.1007/978-1-4614-1053-9_2