Skip to main content
Erschienen in: Metallurgist 11-12/2018

17.04.2018

Prediction of the Fracture of Metal in the Process of Screw Rolling in a Two-Roll Mill

verfasst von: M. M. Skripalenko, B. A. Romantsev, S. P. Galkin, M. N. Skripalenko, L. M. Kaputkina, Tran Ba Huy

Erschienen in: Metallurgist | Ausgabe 11-12/2018

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

We study the process of two-roll screw rolling of billets made of stainless steel in order to estimate the influence of the feed angle on the plasticity of the metal of rolling billets. Pilot rollings were simulated by using the DEFORM software. In the computer simulation, the normalized Cockroft–Latham fracture criterion is used to predict the so-called Mannesmann effect (axial fracture of a billet). The comparison of the results of pilot rollings with the data of computer simulations showed that this fracture criterion is an efficient tool for the investigation of screw rolling. A procedure is proposed for the prediction of fracture of the metal subjected to screw rolling.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat B. A. Romantsev, A. V. Goncharuk, N. M. Vavilkin, and S. V. Samusev, Plastic Metal Forming, MISiS, Moscow (2008). B. A. Romantsev, A. V. Goncharuk, N. M. Vavilkin, and S. V. Samusev, Plastic Metal Forming, MISiS, Moscow (2008).
2.
Zurück zum Zitat B. A. Romantsev, A. V. Goncharuk, N. M. Vavilkin, and S. V. Samusev, Pipe Production, MISiS, Moscow (2011). B. A. Romantsev, A. V. Goncharuk, N. M. Vavilkin, and S. V. Samusev, Pipe Production, MISiS, Moscow (2011).
3.
Zurück zum Zitat P. K. Teterin, Theory of Cross and Screw Rolling, Metallurgiya, Moscow (1983). P. K. Teterin, Theory of Cross and Screw Rolling, Metallurgiya, Moscow (1983).
9.
Zurück zum Zitat Z. Pater and J. Kazanecki, “Complex numerical analysis of the tube forming process using Diescher mill,” Arch. Metal. Mater., 58, Iss. 3, 717–724 (2013), DOI: 10.2478/amm-2013-0060. Z. Pater and J. Kazanecki, “Complex numerical analysis of the tube forming process using Diescher mill,” Arch. Metal. Mater., 58, Iss. 3, 717–724 (2013), DOI: 10.2478/amm-2013-0060.
13.
Zurück zum Zitat A. Stefanik, P. Szota, S. Mroz, and H. Dyja, “Application of the three-roll skew rolling to magnesium rods production,” Mater. Testing,. 58, No. 5, 438–441 (2016).CrossRef A. Stefanik, P. Szota, S. Mroz, and H. Dyja, “Application of the three-roll skew rolling to magnesium rods production,” Mater. Testing,. 58, No. 5, 438–441 (2016).CrossRef
14.
Zurück zum Zitat S. P. Galkin, “Regulating radial-shear and screw rolling on the basis of the metal trajectory,” Steel Translat., 34, No. 7, 57–60 (2004). S. P. Galkin, “Regulating radial-shear and screw rolling on the basis of the metal trajectory,” Steel Translat., 34, No. 7, 57–60 (2004).
15.
Zurück zum Zitat S. Z. Li, W. H. Meng, L. W. Hu, and B. Ding, “Research on the tendency of inner crack during 3-roll skew rolling process of round billets,” Adv. Mater. Res., 145, 238–242 (2011), www.scientific.net/AMR.145.238, acc. June 10, 2017. S. Z. Li, W. H. Meng, L. W. Hu, and B. Ding, “Research on the tendency of inner crack during 3-roll skew rolling process of round billets,” Adv. Mater. Res., 145, 238–242 (2011), www.​scientific.​net/​AMR.​145.​238, acc. June 10, 2017.
16.
Zurück zum Zitat S. Chiluveru, Computational Modeling of Crack Initiation in Crossroll Piercing, Massachusetts Institute of Technology, Cambridge, MA (2007). S. Chiluveru, Computational Modeling of Crack Initiation in Crossroll Piercing, Massachusetts Institute of Technology, Cambridge, MA (2007).
21.
Zurück zum Zitat A. V. Vlasov, “Numerical analysis of damage to the metal caused by cold radial forging according to the results of a finite-element simulation in the DEFORM-3D program,” in: Proc. Int. Sci.-Eng. Conf. Engineering Systems – 2009, Moscow (2009), pp. 204–217. A. V. Vlasov, “Numerical analysis of damage to the metal caused by cold radial forging according to the results of a finite-element simulation in the DEFORM-3D program,” in: Proc. Int. Sci.-Eng. Conf. Engineering Systems – 2009, Moscow (2009), pp. 204–217.
22.
Zurück zum Zitat A. N. Nikulin, Screw Rolling. Stresses, and Strains, Metallurgizdat, Moscow (2015). A. N. Nikulin, Screw Rolling. Stresses, and Strains, Metallurgizdat, Moscow (2015).
23.
Zurück zum Zitat V. L. Kolmogorov, Mechanics of Plastic Metal Working, Ural STU, Ekaterinburg (2001). V. L. Kolmogorov, Mechanics of Plastic Metal Working, Ural STU, Ekaterinburg (2001).
26.
Zurück zum Zitat A. I. Lisitsyn and V. Ya. Ostrenko, Modeling of the Processes of Plastic Metal Working (optical methods), Tekhnika, Kiev (1976). A. I. Lisitsyn and V. Ya. Ostrenko, Modeling of the Processes of Plastic Metal Working (optical methods), Tekhnika, Kiev (1976).
27.
Zurück zum Zitat A. P. Chekmarev, Yu. M. Matveev, V. N. Vydrin, and Ya. S. Finkel’shtein, Intensification of Cross Screw Rolling, Metallurgiya, Moscow (1970). A. P. Chekmarev, Yu. M. Matveev, V. N. Vydrin, and Ya. S. Finkel’shtein, Intensification of Cross Screw Rolling, Metallurgiya, Moscow (1970).
28.
Zurück zum Zitat A. V. Belevich, Modeling of the Parameters of Plasticity and Strain Resistance of Steels and Alloys, Vladimir State Univ., Vladimir (2005). A. V. Belevich, Modeling of the Parameters of Plasticity and Strain Resistance of Steels and Alloys, Vladimir State Univ., Vladimir (2005).
29.
Zurück zum Zitat V. A. Belevitin, Development and Improvement of the Methods of Experimental Mechanics for the Optimization of the Technological Processes of Plastic Metal Forming: Dissert. Doct. Techn. Sci., Verkhnii Ufalei (1997). V. A. Belevitin, Development and Improvement of the Methods of Experimental Mechanics for the Optimization of the Technological Processes of Plastic Metal Forming: Dissert. Doct. Techn. Sci., Verkhnii Ufalei (1997).
30.
Zurück zum Zitat P. I. Polukhin, V. K. Vorontsov, V. A. Belevitin, et al., “Evaluation of the stressed state in the processes of cross forging and screw or cross rolling,” in: Plastic Deformation of Metals and Alloys: Coll. Works of MISiS, Metallurgiya, Moscow (1982), pp. 145–150. P. I. Polukhin, V. K. Vorontsov, V. A. Belevitin, et al., “Evaluation of the stressed state in the processes of cross forging and screw or cross rolling,” in: Plastic Deformation of Metals and Alloys: Coll. Works of MISiS, Metallurgiya, Moscow (1982), pp. 145–150.
Metadaten
Titel
Prediction of the Fracture of Metal in the Process of Screw Rolling in a Two-Roll Mill
verfasst von
M. M. Skripalenko
B. A. Romantsev
S. P. Galkin
M. N. Skripalenko
L. M. Kaputkina
Tran Ba Huy
Publikationsdatum
17.04.2018
Verlag
Springer US
Erschienen in
Metallurgist / Ausgabe 11-12/2018
Print ISSN: 0026-0894
Elektronische ISSN: 1573-8892
DOI
https://doi.org/10.1007/s11015-018-0588-z

Weitere Artikel der Ausgabe 11-12/2018

Metallurgist 11-12/2018 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.