nach oben

nächster Artikel Simulation of the Deformation of a Continuously...

Tipp

Prediction of the Fracture of Metal in the Process of Screw Rolling in a Two-Roll Mill

Zeitschrift:: Metallurgist > Ausgabe 11-12/2018

Autoren:: M. M. Skripalenko, B. A. Romantsev, S. P. Galkin, M. N. Skripalenko, L. M. Kaputkina, Tran Ba Huy

Wichtige Hinweise

Translated from Metallurg, No. 11, pp. 11–18, November, 2017.

We study the process of two-roll screw rolling of billets made of stainless steel in order to estimate the influence of the feed angle on the plasticity of the metal of rolling billets. Pilot rollings were simulated by using the DEFORM software. In the computer simulation, the normalized Cockroft–Latham fracture criterion is used to predict the so-called Mannesmann effect (axial fracture of a billet). The comparison of the results of pilot rollings with the data of computer simulations showed that this fracture criterion is an efficient tool for the investigation of screw rolling. A procedure is proposed for the prediction of fracture of the metal subjected to screw rolling.

Bitte loggen Sie sich ein, um Zugang zu diesem Inhalt zu erhalten

Jetzt einloggen Kostenlos registrieren

Sie möchten Zugang zu diesem Inhalt erhalten? Dann informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 69.000 Bücher
über 500 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Umwelt
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Testen Sie jetzt 30 Tage kostenlos.

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 50.000 Bücher
über 380 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Umwelt
Maschinenbau + Werkstoffe

Testen Sie jetzt 30 Tage kostenlos.

Jetzt informieren

B. A. Romantsev, A. V. Goncharuk, N. M. Vavilkin, and S. V. Samusev, Plastic Metal Forming, MISiS, Moscow (2008).

B. A. Romantsev, A. V. Goncharuk, N. M. Vavilkin, and S. V. Samusev, Pipe Production, MISiS, Moscow (2011).

P. K. Teterin, Theory of Cross and Screw Rolling, Metallurgiya, Moscow (1983).

B. A. Romantsev, M. M. Skripalenko, M. N. Skripalenko, and C. B. Hui, “Modeling the piercing of semifinished products in a three-roll rotary rolling mill on a hollow mandrel,” Metallurgist, 59, No. 7–8, 557–561 (2015), DOI: https://doi.org/10.1007/s11015-015-0140-3. CrossRef

www.deform.com/, acc. June 10, 2017.

Y. Li Wang et al., “Gradient structure produced by three roll planetary milling: Numerical simulation and microstructural observations,” Mater. Sci. Eng., A 639, 165–172 (2015), DOI: https://doi.org/10.1016/j.msea.2015.04.078. CrossRef

http://qform3d.ru/, acc. June 10, 2017.

Z. Pater, J. Kazanecki, and J. Bartnicki, “Three dimensional thermo-mechanical simulation of the tube forming process in Diescher’s mill,” J. Mater. Proc. Technol., 177, 167–170 (2006), DOI: https://doi.org/10.1016/j.jmatprotec.2006.03.205. CrossRef

Z. Pater and J. Kazanecki, “Complex numerical analysis of the tube forming process using Diescher mill,” Arch. Metal. Mater., 58, Iss. 3, 717–724 (2013), DOI: 10.2478/amm-2013-0060.

10.

www.mscsoftware.com/, acc. June 10, 2017.

11.

L. Lu, Z.-Xu Wang, Fu-Z. Wang, et al., “Simulation of tube forming process in Mannesmann mill,” J. Shanghai Jiaotong Univ. ( Sci.), 16, 281–285 (2011), http://caod.oriprobe.com/articles/32371494/Simulation_of_Tube_Forming_Process_in_Mannesmann_Mill.htm.

12.

www.transvalor.com/, acc. June 10, 2017.

13.

A. Stefanik, P. Szota, S. Mroz, and H. Dyja, “Application of the three-roll skew rolling to magnesium rods production,” Mater. Testing,. 58, No. 5, 438–441 (2016). CrossRef

14.

S. P. Galkin, “Regulating radial-shear and screw rolling on the basis of the metal trajectory,” Steel Translat., 34, No. 7, 57–60 (2004).

15.

S. Z. Li, W. H. Meng, L. W. Hu, and B. Ding, “Research on the tendency of inner crack during 3-roll skew rolling process of round billets,” Adv. Mater. Res., 145, 238–242 (2011), www.scientific.net/AMR.145.238, acc. June 10, 2017.

16.

S. Chiluveru, Computational Modeling of Crack Initiation in Crossroll Piercing, Massachusetts Institute of Technology, Cambridge, MA (2007).

17.

www.3ds.com/products-services/simulia/products/abaqus/abaqusexplicit/, acc. June 10, 2017.

18.

Modeling of the Mannesmann Effect in Tube Piercing, Padua@Research [Padova Digital University Archive], http://paduaresearch.cab.unipd.it/1552/, acc. June 10, 2017.

19.

www.solidworks.com/, acc. June 10, 2017.

20.

M. M. Skripalenko and M. N. Skripalenko, “On choosing software for simulating metal-forming processes,” Metallurgist, 57, Nos. 1–2, 3–7 (2013), DOI: https://doi.org/10.1007/s11015-013-9683-3.

21.

A. V. Vlasov, “Numerical analysis of damage to the metal caused by cold radial forging according to the results of a finite-element simulation in the DEFORM-3D program,” in: Proc. Int. Sci.-Eng. Conf. Engineering Systems – 2009, Moscow (2009), pp. 204–217.

22.

A. N. Nikulin, Screw Rolling. Stresses, and Strains, Metallurgizdat, Moscow (2015).

23.

V. L. Kolmogorov, Mechanics of Plastic Metal Working, Ural STU, Ekaterinburg (2001).

24.

https://tesis.com.ru/infocenter/downloads/deform/deform_es09_mgtu1.pdf, acc. June 20, 2017.

25.

Y. Lou, H. Huh, S. Lim, and K. Pack, “New ductile fracture criterion for prediction of fracture forming limit diagrams of sheet metals,” Int. J. Solids and Struct., 49, 3605–3615 (2017), DOI: 10.1016/j.ijsolstr.2012.02.016, www.sciencedirect.com/science/article/pii/S002076831200056X, acc. June 10, 2017.

26.

A. I. Lisitsyn and V. Ya. Ostrenko, Modeling of the Processes of Plastic Metal Working ( optical methods), Tekhnika, Kiev (1976).

27.

A. P. Chekmarev, Yu. M. Matveev, V. N. Vydrin, and Ya. S. Finkel’shtein, Intensification of Cross Screw Rolling, Metallurgiya, Moscow (1970).

28.

A. V. Belevich, Modeling of the Parameters of Plasticity and Strain Resistance of Steels and Alloys, Vladimir State Univ., Vladimir (2005).

29.

V. A. Belevitin, Development and Improvement of the Methods of Experimental Mechanics for the Optimization of the Technological Processes of Plastic Metal Forming: Dissert. Doct. Techn. Sci., Verkhnii Ufalei (1997).

30.

P. I. Polukhin, V. K. Vorontsov, V. A. Belevitin, et al., “Evaluation of the stressed state in the processes of cross forging and screw or cross rolling,” in: Plastic Deformation of Metals and Alloys: Coll. Works of MISiS, Metallurgiya, Moscow (1982), pp. 145–150.

Titel: Prediction of the Fracture of Metal in the Process of Screw Rolling in a Two-Roll Mill
Autoren:: M. M. Skripalenko
B. A. Romantsev
S. P. Galkin
M. N. Skripalenko
L. M. Kaputkina
Tran Ba Huy
Publikationsdatum: 17.04.2018
DOI: https://doi.org/10.1007/s11015-018-0588-z
Verlag: Springer US
Zeitschrift: Metallurgist
Ausgabe 11-12/2018
Print ISSN: 0026-0894
Elektronische ISSN: 1573-8892

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Bildnachweise

MKVS, Nordson/© Nordson, ViscoTec/© ViscoTec, Robatech/© Robatech, Krahn Ceramics/© Krahn Ceramics, Hellmich GmbH/© Hellmich GmbH, Merz+Benteli/© Merz+Benteli

Springer Professional

Tipp

Weitere Artikel dieser Ausgabe durch Wischen aufrufen

Bitte loggen Sie sich ein, um Zugang zu diesem Inhalt zu erhalten

Sie möchten Zugang zu diesem Inhalt erhalten? Dann informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11-12/2018

Devices for the Formation of Long-Length Products from Powder Materials

Evaluation of the Effect of Nepheline Sinter Structure on Hydration Activity During Alumina Production

Simulation of the Energy States of Electrolyzers with Roasted Anodes at Elevated Currents

Using the Properties of One-Sheeted Hyperboloid in Rolls of Sheet Mill Stands

Analysis of Drive Mechanisms for the Working Stand in Periodic Cold-Rolled Pipe Mills

Theoretical Foundations of the Design of a Lever Mechanism of Oscillations of the Mold of a Sorting Machine for the Continuous Casting of Billets

Premium Partner

Marktübersichten