Weitere Kapitel dieses Buchs durch Wischen aufrufen
Development and innovation researches of conductive ink have practical significance because conductive ink is a key material for printed electronic technology. To solve the poor adhesion problem of pure nano-silver ink on a paper substrate, paper-based resin nano-silver conductive ink for inkjet printing was produced by adding acrylic resin and photo-initiator into silver nano-colloids. The electrical conductivity and mechanical properties of the conductive ink layer were analyzed and discussed. Firstly, a certain proportion of the nano-silver and photo-curable acrylic resin were dispersed in an organic solvent, and a small amount of additives were added to obtain conductive ink suitable for inkjet printing. Then, different sintering conditions of pure nano-silver ink were analyzed to discuss the effects of sintering temperature on the nano-silver resistivity, and conductive property of resin nano-silver ink was discussed. Finally, the mechanical stability of pure nano-silver ink and resin nano-silver ink was compared. The results showed that the conductive ink containing 20 % of the nano-silver obtained the conductivity of 2.72 × 105 S/m when sintered at 170 °C for 2 min, while the conductive ink containing resin obtained the conductivity of 3.3 × 104 S/m. The addition of acrylic resin has a positive effect on improving the mechanical stability, especially in the vertical direction of the resistance force.
Bitte loggen Sie sich ein, um Zugang zu diesem Inhalt zu erhalten
Sie möchten Zugang zu diesem Inhalt erhalten? Dann informieren Sie sich jetzt über unsere Produkte:
Kim, D., & Moon, J. (2005). Highly conductive ink jet printed films of nanosilver particles for printable electronics. Electrochemical and Solid-State Letters, 2005(8), J30–J33. CrossRef
Kim, D., Jeong, S., Park, B. K., & Moon, J. (2006). Direct writing of silver conductive patterns: improvement of film morphology and conductance by controlling solvent compositions. Applied Physics Letters, 2006(89), 264101. CrossRef
Siegel, A. C., Phillips, S. T., Dickey, M. D., Lu, N., Suo, Z., & Whitesides, G. M. (2010). Foldable printed circuit boards on paper substrates. Advanced Functional Materials, 20, 28–35. CrossRef
Yu, Y., Cui, Y., Chen, G., He, M. (2015). Preparation and study of ink-jet printing of Ag based conductive ink on paper. Applied Mechanics and Materials, 731, 524–527, doi:10.4028/ www.scientific.net/AMM.731.524
He, W., Yang, Y., Wang, S., He, B., & Hu, K. (2009). Preparation technology and application progress of conductive inks. Materials Review, 21, 30–33.
Xiang, Y., Lu, Q., & Wang, Z. (1997). Study on the ink penetration of offset newsprint. China Pulp & Paper, 01, 28–32.
- Preparation and Performance Study of Paper-Based Resin Nano-silver Inkjet Conductive Ink
- Springer Singapore
- Chapter 123
Neuer Inhalt/© Filograph | Getty Images | iStock