nach oben

Erschienen in:

2017 | OriginalPaper | Buchkapitel

Preparation of Porous Titanium Oxide Film by Sol-Gel Method

verfasst von : Guobo Yang, Baoqiang Xu, Xianjun Lei, Hongpin Dai, Xutao Guo, Jian Wu, Bin Yang

Erschienen in: TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this paper, porous titanium oxide films were prepared through sol-gel route by using titanium butoxide (Ti(OC₄H₉)₄) as a precursor and PEG-2000(polyethylene glycol) on monocrystalline silicon/stainless steel substrate. Some impact factors for pore characterization were investigated by means of Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM). The results indicate porous films with 20–250 nm spherical pores were prepared. The pore diameter gradually becomes bigger with the dosage of PEG increasing but almost unchangeable through changing the drying temperature. With increases of pulling times and sintering temperature, the pore diameter reduced and enlarged slightly, respectively. The different material substrates remarkably affect the surface of porous titanium oxide films.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Transmission Probability of Diffusing Particles—A Case Study

Nächstes Kapitel Hydride Precipitates in Zirconium Alloys: Evolution of Dissolution and Precipitation Temperatures During Thermal Cycling Correlated to Microstructure Features

P. Novotna, J. Krysa, J. Maixner et al., Photo-catalytic activity of sol–gel TiO₂ thin films deposited on soda lime glass and soda lime glass pre-coated with a SiO₂ layer. Surf. Coat. Technol. 204, 2570–2575 (2010)CrossRef

P. Li, I. Kangasniemi, K. Groot, T. Kokubo, Bonelike Hydroxyapatite Induction by a Ge1-Der ived Titania on a Titanium Substrate. J. Am. Ceram. Soc. 77(5), 1307–1312 (1994)CrossRef

T. Kokubo, H.M. Kim, M. Kawashita, T. Nakamura, Bioactive metals: preparation and properties. J. Mater. Sci. Mater. Med. 15(2), 99–107 (2004)CrossRef

B. Yang, M. Uchida, H.-M. Kim, X. Zhang, T. Kokubo, Preparation of bioactive titanium metal via anodic oxidation treatment. Biomaterials 25(6), 1003–1010 (2004)CrossRef

M. Uchida, H.M. Kim, T. Kokubo, S. Fujibayashi, T. Nakamura, Structural dependence of apatite formation on titania gels in a simulated body fluid. J. Biomed. Mater. Res., Part A 64(1), 164–170 (2003)CrossRef

M. Wei, M. Uchida, H.-M. Kim, T. Kokubo, T. Nakamura, Apatite-forming ability of CaO-containing titania. Biomaterials 23(1), 167–172 (2002)CrossRef

T. Kasuga, H. Kondo, M. Nogami, Apaptite Formation on TiO₂ in Simulated Body Fluid. J. Cryst. Growth, 235(1), 235–240 (2002)

D. Mardare, G.I. Rusu, The influence of heat treatment on the optical properties of titanium oxide thin films. Mater Lett. 56(3), 210–214 (2002)CrossRef

X. Zheng, Z. Wei, H. Chen et al., In-situ fabrication of dual porous titanium dioxide films as anode for carbon cathode based perovskite solar cell. J. Energy Chem. 24(6), 736–743 (2015)CrossRef

10.

J. Dervaux, P.A. Cormier, S. Konstantinidis et al., Deposition of porous titanium oxide thin films as anode material for dye sensitized solar cells. Vacuum 114, 213–220 (2015)CrossRef

11.

Y.S. Joung, B.M. Figliuzzi, C.R. Buie, Design of capillary flows with functionally graded porous titanium oxide films fabricated by anodization instability. J. Colloid Interface Sci. 423(3), 143–150 (2014)

12.

Z.N. Kayani, Z. Saleem, S. Riaz, S. Naseem, F. Saleemi, Deposition of porous titanium oxide thin films as anti-fogging and anti-reflecting medium. Optik 127(12), 5124–5127 (2016)CrossRef

13.

M.G. Choi, Y.M. Sung, Preparation of double layer porous films of Titanium/Titanium oxide for photoelectrochemical cells application. Opt. Mater. 36(8), 1430–1435 (2014)CrossRef

14.

P.S. Liu, H.Y. Du, F.J. Xia, Fabrication and characterization of a porous titanium dioxide film with sub-micropores. Mater. Des. 51(5), 193–198 (2013)

15.

A.G. Macedo, L.L. Mattos, E.R. Spada et al., Preparation of porous titanium oxide films onto indium tin oxide for application in organic photovoltaic devices. Appl. Surf. Sci. 258, 5375–5379 (2012)CrossRef

16.

N. Agoudjil, T. Benkacem, Synthesis of porous titanium dioxide membranes. Desalination 206(1), 531–537 (2007)CrossRef

17.

I. Piwoński, Preparation method and some tribological properties of porous titanium dioxide layers. Thin Solid Films 515(7–8), 3499–3506 (2007)CrossRef

18.

T. Tsuru, T. Kan-no, T. Yoshioka, M. Asaeda, A photocatalytic membrane reactor for VOC decomposition using Pt-modified titanium oxide porous membranes. J. Membr. Sci. 280(1), 156–162 (2006)CrossRef

19.

M. Alzamani, A. Shokuhfar, E. Eghdam, S. Mastali, Influence of catalyst on structural and morphological properties of TiO₂ nano-structured films prepared by sol–gel on glass. Prog. Nat. Sci. 23(1), 77–84 (2013)CrossRef

20.

C. Sanchez, J. Livage, M. Henry, F. Babonneau, Chemical modification of alkoxide precursors. J. Non-Cryst. Solids 100(1–3), 65–76 (1988)CrossRef

21.

J. Livage, D. Ganguli, Sol-gel electrochromic coating and devices: a review. Sol. Energy Mater. Sol. Cells 68(3-4), 365–381 (2001)

Titel: Preparation of Porous Titanium Oxide Film by Sol-Gel Method
verfasst von: Guobo Yang
Baoqiang Xu
Xianjun Lei
Hongpin Dai
Xutao Guo
Jian Wu
Bin Yang
Verlag: Springer International Publishing
Buch: TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings
Print ISBN: 978-3-319-51492-5

Electronic ISBN: 978-3-319-51493-2

Copyright-Jahr: 2017
DOI: https://doi.org/10.1007/978-3-319-51493-2_73

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht