nach oben

Erschienen in:

2022 | OriginalPaper | Buchkapitel

4. Printable Cement-Based Materials: Fresh Properties Measurements and Control

verfasst von : Timothy Wangler, Robert J. Flatt, Nicolas Roussel, Arnaud Perrot, Mohammed Sonebi, Rob Wolfs, Freek Bos, Dirk Lowke, Niklas Freund, Dietmar Stephan, Ursula Pott, Lex Reiter, Steffen Grünewald, Wilson Ricardo Leal da Silva, Geert De Schutter

Erschienen in: Digital Fabrication with Cement-Based Materials

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Digital fabrication with cementitious materials is a rapidly growing field of research in which the evolution of strength during the various processes, such as 3D printing, is the key controlling parameter. The strength evolves over multiple orders of magnitude during the process, and thus, it is essential to properly characterize the strength evolution in order to guarantee process success. This chapter summarizes the state of the art in these characterization methods for digital fabrication with fresh cementitious materials, reviewing well-known and more recently developed methods.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Digital Fabrication with Cement-Based Materials: Underlying Physics

Nächstes Kapitel Properties and Testing of Printed Cement-Based Materials in Hardened State

Alfani, R., and Guerrini, G. L. (2005). Rheological test methods for the characterization of extrudable cement-based materials—a review. Materials and Structures, 38, 239–247.

Alfani, R., Grizzuti, N., Guerrini, G. L., Lezzi, G. (2007). The use of the capillary rheometer for the rheological evaluation of extrudable cement-based materials. Rheologica acta, 46, 703–709.

Assaad, J. J, Harb, J., Maalouf, Y. (2014). Measurement of yield stress of cement pastes using the direct shear test. Journal of Non-Newtonian Fluid Mechanics, 214, 18–27. https://doi.org/10.1016/j.jnnfm.2014.10.009.

Assaad, J., Khayat, K. H., and Mesbah, H. (2003a). Assessment of Thixotropy of Flowable and Self-Consolidating Concrete. MJ, 100, 99–107. https://doi.org/10.14359/12548.

Assaad, J., Khayat, K. H., and Mesbah, H. (2003b). Variation of Formwork Pressure with Thixotropy of Self-Consolidating Concrete. MJ, 100, 29–37. https://doi.org/10.14359/12460.

Barnes, H. A., and Nguyen, Q. D. (2001). Rotating vane rheometry—a review. Journal of Non-Newtonian Fluid Mechanics, 98, 1–14.

Banfill, P. F. G., and Kitching, D. R. (1990). 14 USE OF A CONTROLLED STRESS RHEOMETER TO STUDY THE YIELD STRESS OF OILWELL CEMENT SLURRIES. In: Rheology of Fresh Cement and Concrete: Proceedings of an International Conference, Liverpool, 1990. CRC Press, p. 125.

Benbow, J., and Bridgwater, J. (1993). Paste flow and extrusion. Oxford Series on Advanced Manufacturing, No. 10, Clarendon Press, Oxford.

Bensted, J. (1987). Some applications of conduction calorimetry to cement hydration. Advances in Cement Research, 1, 35–44. https://doi.org/10.1680/adcr.1987.1.1.35.

Bonen, Deshpande, Olek, Shen, L., Struble, L., Lange, D., and Khayat, K. (2007). Robustness of Self-Consolidating Concrete. In: Proceedings of the Fifth International RILEM Symposium on Self-compacting Concrete. Ghent, Belgium, pp 33–42.

Bouvet, A., Ghorbel, E., and Bennacer, R. (2010). The mini-conical slump flow test: Analysis and numerical study. Cement and Concrete Research, 40, 1517–1523.

C01 Committee Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle. ASTM International.

C09 Committee Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance. ASTM International.

Chan, T. W., and Baird, D. G. (2002). An evaluation of a squeeze flow rheometer for the rheological characterization of a filled polymer with a yield stress. Rheologica Acta, 41, 245–256.

Chen, Y., Li, Z., Chaves Figueiredo, S., Copuroglu, O., Veer, F., Schlangen, E. (2019). Limestone and Calcined Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing: A Fundamental Study of Extrudability and Early-Age Strength Development. Applied Sciences, 9, 1809. https://doi.org/10.3390/app9091809.

Craipeau, T., Lecompte, T., Toussaint, F., and Perrot, A. (2019). Evolution of Concrete/Formwork Interface in Slipforming Process. In: Wangler, T., Flatt, R. J. (eds) First RILEM International Conference on Concrete and Digital Fabrication—Digital Concrete 2018. Springer International Publishing, pp. 12–23.

Choi, M., Roussel, N., Kim, Y., and Kim, J. (2013). Lubrication layer properties during concrete pumping. Cement and Concrete Research, 45, 69–78. https://doi.org/10.1016/j.cemconres.2012.11.001.

D18 Committee Test Method for Mechanical Cone Penetration Testing of Soils. ASTM International.

D18 Committee Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils. ASTM International.

D18 Committee Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils. ASTM International.

D18 Committee Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell. ASTM International.

D18 Committee Test Method for Unconfined Compressive Strength of Cohesive Soil. ASTM International.

Dressler, I., Freund, N., and Lowke, D. (2020). The Effect of Accelerator Dosage on Fresh Concrete Properties and on Interlayer Strength in Shotcrete 3D Printing. Materials, 13, 374. https://doi.org/10.3390/ma13020374.

Drewniok, M., Cygan, G., and Gołaszewski, J. (2017). Influence of the Rheological Properties of SCC on the Formwork Pressure. Procedia Engineering, 192, 124–129.

De Larrard, F., Sedran, T., Hu, C., et al. (1996). Evolution of the workability of superplasticised concretes: assessment with the BTRHEOM rheometer. In: RILEM PROCEEDINGS, pp. 377–388.

EN 14488–2: Testing sprayed concrete—Part 2: Compressive strength of young sprayed concrete.

Engmann, J., Servais, C., and Burbidge, A. S. (2005). Squeeze flow theory and applications to rheometry: a review. Journal of Non-newtonian Fluid Mechanics, 132, 1–27.

Estellé, P., Lanos, C., Perrot, A., and Amziane, S. (2008). Processing the vane shear flow data from Couette analogy. Applied Rheology, 18, 34037.

Estellé, P., Lanos, C., and Perrot, A. (2008). Processing the Couette viscometry data using a Bingham approximation in shear rate calculation. Journal of Non-Newtonian Fluid Mechanics, 154, 31–38.

Estellé, P., and Lanos, C. (2012). High torque vane rheometer for concrete: principle and validation from rheological measurements. Applied Rheology, 22, 12881.

EN 206–1. Concrete - Part 1: Specification, performance, production and conformity.

Flatt, R. J., and Bowen, P. (2006). Yodel: A Yield Stress Model for Suspensions. Journal of the American Ceramic Society, 89, 1244–1256. https://doi.org/10.1111/j.1551-2916.2005.00888.x.

Ferraris, C. F., and de Larrard, F. (1998). Modified slump test to measure rheological parameters of fresh concrete. Cement, Concrete and Aggregates, 20, 241–247.

Feys, D., Cepuritis, R., Jacobsen, S, Lesage, K., Secrieru, E., and Yahia, A. (2018). Measuring rheological properties of cement pastes: most common techniques, procedures and challenges. RILEM Technical Letters, 2, 129–135.

Feys, D., Wallevik, J. E., Yahia, A., Khayat, K., and Wallevik, O. H. (2012). Extension of the Reiner–Riwlin equation to determine modified Bingham parameters measured in coaxial cylinders rheometers. Materials and Structures, 46, 289–311. https://doi.org/10.1617/s11527-012-9902-6.

Gelardi, G., and Flatt, R. J. (2016). 11 - Working mechanisms of water reducers and superplasticizers. In: Science and Technology of Concrete Admixtures. Woodhead Publishing, pp. 257–278.

Händle, F. (2007). Extrusion in ceramics. Springer Science & Business Media.

Hu, C., de Larrard, F., Sedran, T., Boulay, C., Bosc, F., and Deflorenne, F. (1996). Validation of BTRHEOM, the new rheometer for soft-to-fluid concrete. Materials and Structures, 29, 620–631.

Jayathilakage, R., Sanjayan, J., and Rajeev, P. (2019). Direct shear test for the assessment of rheological parameters of concrete for 3D printing applications. Mater Struct, 52, 12. https://doi.org/10.1617/s11527-019-1322-4.

Khalil, N., Aouad, G., El Cheikh, K., and Rémond, S. (2017). Use of calcium sulfoaluminate cements for setting control of 3D-printing mortars. Construction and Building Materials, 157, 382–391. https://doi.org/10.1016/j.conbuildmat.2017.09.109.

Khayat, K., Schutter, G. D. (2014). Mechanical Properties of Self-Compacting Concrete: State-of-the-Art Report of the RILEM Technical Committee 228-MPS on Mechanical Properties of Self-Compacting Concrete. Springer International Publishing.

Kloft, H., Krauss, H. –W., Hack, N., Herrmann, E., Neudecker, S., Varady, P. A., and Lowke, D. (2020). Influence of process parameters on the interlayer bond strength of concrete elements additive manufactured by Shotcrete 3D Printing (SC3DP). Cement and Concrete Research, 134, 106078. https://doi.org/10.1016/j.cemconres.2020.106078.

Koehler, E. P., Fowler, D. W., Ferraris, C. F., and Amziane, S. (2005). A new, portable rheometer for fresh self-consolidating concrete. ACI SPECIAL PUBLICATIONS, 233, 97.

Koehler, E. P., and Fowler, D. W. (2004). Development of a portable rheometer for fresh portland cement concrete. ICAR Research Report-105–3F, University of Texas at Austin.

Le Roy, R., and Roussel, N. (2005). The Marsh Cone as a viscometer: theoretical analysis and practical limits. Materials and Structures, 38, 25–30.

Lecompte, T., and Perrot, A. (2017). Non-linear modeling of yield stress increase due to SCC structural build-up at rest. Cement and Concrete Research, 92, 92–97. https://doi.org/10.1016/j.cemconres.2016.11.020.

Lee, H. K., Lee, K. M., Kim, Y. H., Yim, H., and Bae, D. B. (2004). Ultrasonic in-situ monitoring of setting process of high-performance concrete. Cement and Concrete Research, 34, 631–640. https://doi.org/10.1016/j.cemconres.2003.10.012.

Lloret Fritschi, E. (2016). Smart Dynamic Casting—A digital fabrication method for non-standard concrete structures. ETH Zurich.

Lloret, E., Shahab, A. R., Linus, M., Flatt, R. J., Gramazio, F., Kohler, M., and Langenberg, S. (2015). Complex concrete structures: Merging existing casting techniques with digital fabrication. Computer-Aided Design, 60, 40–49. https://doi.org/10.1016/j.cad.2014.02.011.

Lloret Fritschi, E., Reiter, L., Wangler, T., Gramazio, F., Kohler, M., and Flatt, R. J. (2017). Smart Dynamic Casting: Slipforming with Flexible Formwork—Inline Measurement and Control. In: Proceedings HPC/CIC Tromsø 2017. Norwegian Concrete Association, paper no. 27.

Lootens, D., Jousset, P., Martinie, L., Roussel, N., and Flatt, R. J. (2009). Yield stress during setting of cement pastes from penetration tests. Cement and Concrete Research, 39, 401–408. https://doi.org/10.1016/j.cemconres.2009.01.012.

Liu, S. H., Sun, D., and Matsuoka, H. (2005). On the interface friction in direct shear test. Computers and Geotechnics, 32, 317–325. https://doi.org/10.1016/j.compgeo.2005.05.002.

Mantellato, S., Palacios, M., and Flatt, R. J. (2019) Relating early hydration, specific surface and flow loss of cement pastes. Mater Struct, 52, 5. https://doi.org/10.1617/s11527-018-1304-y.

Marchon, D., and Flatt, R. J. (2016). 8 - Mechanisms of cement hydration. In: Aïtcin, P. –C., Flatt, R. J. (eds.) Science and Technology of Concrete Admixtures. Woodhead Publishing, pp. 129–145.

Marchon, D., Kawashima, S., Bessaies-Bey, H., Mantellato, S., and Ng, S. (2018). Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry. Cement and Concrete Research, 112, 96–110. https://doi.org/10.1016/j.cemconres.2018.05.014.

Ma, G., and Wang, L. (2018). A critical review of preparation design and workability measurement of concrete material for largescale 3D printing. Frontiers of Structural and Civil Engineering, 12, 382–400.

Mahaut, F., Mokéddem, S., Chateau, X., Roussel, N., and Ovarlez, G. (2008). Effect of coarse particle volume fraction on the yield stress and thixotropy of cementitious materials. Cement and Concrete Research, 38, 1276–1285. https://doi.org/10.1016/j.cemconres.2008.06.001.

Ma, S., Qian, Y., and Kawashima, S. (2018). Experimental and modeling study on the non-linear structural build-up of fresh cement pastes incorporating viscosity modifying admixtures. Cement and Concrete Research, 108, 1–9.

Mostafa, A. M., and Yahia, A. (2016). New approach to assess build-up of cement-based suspensions. Cement and Concrete Research, 85, 174–182. https://doi.org/10.1016/j.cemconres.2016.03.005.

Mimoune, M., and Aouadja F. Z. (2004). Rheometrical exploitation of experimental results obtained from new simulation device for extrusion on clay pastes. Materials and Structures, 37, 193–201.

Mechtcherine, V., Bos, F. P., Perrot, A., da Silva, W. R. L., Nerella, V. N., Fataei, S., Wolfs, R. J. M., Sonebi, M., and Roussel, N. (2020). Extrusion-based additive manufacturing with cement-based materials—Production steps, processes, and their underlying physics: A review. Cement and Concrete Research, 132, 106037. https://doi.org/10.1016/j.cemconres.2020.106037.

Mettler, L. K., Wittel, F. K., Flatt, R. J., and Herrmann, H. J. (2016). Evolution of strength and failure of SCC during early hydration. Cement and Concrete Research, 89, 288–296. https://doi.org/10.1016/j.cemconres.2016.09.004.

Myrdal, R. (2007). Accelerating admixtures for concrete. State of the art. SINTEF Building and Infrastructure; COIN - Concrete innovation Centre.

Nguyen, T. L. H., Roussel, N., and Coussot, P. (2006). Correlation between L-box test and rheological parameters of a homogeneous yield stress fluid. Cement and Concrete Research, 36, 1789–1796.

Nielsson, I., and Wallevik, O. H. (2003). Rheological evaluation of some empirical test methodspreliminary results. In: Third international RILEM symposium, RILEM Pub. PRO, pp. 59–68.

Nunes S. da C. B. (2008). Performance-based design of self-compacting concrete (SCC): A contribution to enchance SCC mixtures robustness. Ph.D., Universidade do Porto (Portugal).

Obla, K., Lobo, C. (2015). Prescriptive Specifications: A reality check. Concrete International, pp. 29–31.

Pashias, N., Boger, D. V., Summers, J., and Glenister, D. J. (1996). A fifty cent rheometer for yield stress measurement. Journal of Rheology, 40, 1179–1189.

Perrot, A., Rangeard, D., and Mélinge, Y. (2014). Prediction of the ram extrusion force of cement-based materials. Applied Rheology, 24, 53320.

Perrot, A., Mélinge, Y., Estellé, P., Rangeard, D., and Lanos, C. (2011). The back extrusion test as a technique for determining the rheological and tribological behaviour of yield stress fluids at low shear rates. Applied Rheology, 21, 53642.

Perrot, A., Mélinge, Y., Rangeard, D., Micaelli, F., Estelle, P., and Lanos, C. (2012). Use of ram extruder as a combined rheo-tribometer to study the behaviour of high yield stress fluids at low strain rate. Rheologica acta, 51, 743–754.

Perrot, A., Lecompte, T., Khelifi, H., Brumaud, C., Hot, J., and Roussel, N. (2012). Yield stress and bleeding of fresh cement pastes. Cement and Concrete Research, 42, 937–944. http://dx.doi.org/https://doi.org/10.1016/j.cemconres.2012.03.015.

Pierre, A., Perrot, A., Histace, A., Gharsalli, S., and Kadri, E. H. (2016). A study on the limitations of a vane rheometer for mineral suspensions using image processing. Rheologica Acta.

Pott, U., Ehm, C., Jakob, C., and Stephan, D. (2020). Investigation of the Early Cement Hydration with a New Penetration Test, Rheometry and In-Situ XRD. In: Mechtcherine, V., Khayat, K., and Secrieru, E. (eds.) Rheology and Processing of Construction Materials. Springer International Publishing, Cham, pp. 246–255.

Perrot, A., Rangeard, D., Nerella, V., and Mechtcherine, V. (2019). Extrusion of cement-based materials—an overview. RILEMTechLett 3. https://doi.org/10.21809/rilemtechlett.2018.75.

Pierre, A., Lanos, C., and Estellé, P. (2013). Extension of spread-slump formulae for yield stress evaluation. Applied Rheology, 23, 63849.

Qian, Y., and Kawashima, S. (2016). Use of creep recovery protocol to measure static yield stress and structural rebuilding of fresh cement pastes. Cement and Concrete Research, 90, 73–79.

Reiter, L., Wangler, T., Roussel, N., and Flatt, R. J. (2018). The role of early age structural build-up in digital fabrication with concrete. Cement and Concrete Research, 112, 86–95. https://doi.org/10.1016/j.cemconres.2018.05.011.

Reiter, L., Wangler, T., Anton, A., and Flatt, R. J. (2020). Setting on demand for digital concrete—Principles, measurements, chemistry, validation. Cement and Concrete Research, 132, 106047. https://doi.org/10.1016/j.cemconres.2020.106047.

Reiter, L. (2019). Structural Build-up for Digital Fabrication with Concrete—Materials, Methods, and Processes. ETH Zurich.

Reinhardt, H. W., Große, C. U., and Herb, A. T. (2000). Ultrasonic monitoring of setting and hardening of cement mortar—A new device. Mat Struct, 33, 581–583. https://doi.org/10.1007/BF02480539.

Roussel, N. (2006). A thixotropy model for fresh fluid concretes: Theory, validation and applications. Cement and Concrete Research, 36, 1797–1806. https://doi.org/10.1016/j.cemconres.2006.05.025.

Roussel, N., and Lanos, C. (2003). Plastic fluid flow parameters identification using a simple squeezing test. Applied Rheology, 13, 132–139.

Roussel, N., Lemaître, A., Flatt, R. J., and Coussot, P. (2010). Steady state flow of cement suspensions: A micromechanical state of the art. Cement and Concrete Research, 40, 77–84. https://doi.org/10.1016/j.cemconres.2009.08.026.

Roussel, N. (2007). The LCPC BOX: a cheap and simple technique for yield stress measurements of SCC. Materials and Structures, 40, 889–896.

Roussel, N. (2005). Steady and transient flow behaviour of fresh cement pastes. Cement and Concrete Research, 35, 1656–1664. https://doi.org/10.1016/j.cemconres.2004.08.001.

Roussel, N. (2006). A thixotropy model for fresh fluid concretes: Theory, validation and applications. Cement and Concrete Research, 36, 1797–1806. http://dx.doi.org/https://doi.org/10.1016/j.cemconres.2006.05.025.

Roussel, N. (2011). Understanding the rheology of concrete. Elsevier.

Roussel, N. (2018). Rheological requirements for printable concretes. Cement and Concrete Research, 112, 76–85. https://doi.org/10.1016/j.cemconres.2018.04.005.

Roussel, N., Bessaies-Bey, H., Kawashima, S., Vasilic, K., and Wolfs, R. J. M. (2019). Recent advances on yield stress and elasticity of fresh cement-based materials. Cement and Concrete Research, 124, 105798. https://doi.org/10.1016/j.cemconres.2019.105798.

Roussel, N., and Coussot, P. (2005). “Fifty-cent rheometer” for yield stress measurements: From slump to spreading flow. Journal of Rheology, 49, 705–718. http://dx.doi.org/https://doi.org/10.1122/1.1879041.

Roussel, N., Ovarlez, G., Garrault, S., and Brumaud, C. (2012). The origins of thixotropy of fresh cement pastes. Cement and Concrete Research, 42, 148–157. https://doi.org/10.1016/j.cemconres.2011.09.004.

Roussel, N., and Le Roy, R. (2005). The Marsh cone: a test or a rheological apparatus? Cement and Concrete Research, 35, 823–830.

Schultz, M. A., and Struble, L. J. (1993). Use of oscillatory shear to study flow behavior of fresh cement paste. Cement and Concrete Research, 23, 273–282.

Schutter, G. D., and Feys, D. (2016). Pumping of Fresh Concrete: Insights and Challenges. RILEM Technical Letters, 1, 76–80. https://doi.org/10.21809/rilemtechlett.2016.15.

Schultheiss, M., Wangler, T., Reiter, L., Roussel, N., and Flatt, R. J. (2016). Feedback control of Smart Dynamic Casting through formwork friction measurements. In: SCC 2016 - 8th International Rilem Symposium on Self-Compacting Concrete, Flowing toward Sustainability. RILEM Publications, pp. 637–644.

Shahab, A., Lloret, E., Fischer, P., Gramazio, F., Kohler, M., and Flatt, R. J. (2014). Smart dynamic casting or how to exploit the liquid to solid transition in cementitious materials. In: Proceedings CD of the 1st International Conference on Rheology and Processing of Construction Materials and of the 7th International Conference on Self-Compacting Concrete. Paris, France.

Spangenberg, J., Roussel, N., Hattel, J. H., Stang, H., Skocek, J., and Geiker, M.R. (2012). Flow induced particle migration in fresh concrete: theoretical frame, numerical simulations and experimental results on model fluids. Cement and Concrete Research, 42, 633–641.

Thomas, J. J., Jennings, H. M., and Chen, J. J. (2009). Influence of Nucleation Seeding on the Hydration Mechanisms of Tricalcium Silicate and Cement. J Phys Chem C, 113, 4327–4334. https://doi.org/10.1021/jp809811w.

Thrane, L. N., Pade, C., and Svensson, T. (2007). Estimation of Bingham rheological parameters of SCC from slump flow measurement. In: 5th International RILEM Symposium on Self-Compacting Concrete. RILEM Publications SARL, pp. 353–358.

Thrane, L. N., Pade, C., and Nielsen, C. V. (2009). Determination of rheology of self-consolidating concrete using the 4C-Rheometer and how to make use of the results. Journal of ASTM International, 7, 1–10.

Tchamba, J. C., Amziane, S., Ovarlez, G., and Roussel, N. (2008). Lateral stress exerted by fresh cement paste on formwork: Laboratory experiments. Cement and Concrete Research, 38, 459–466. http://dx.doi.org/https://doi.org/10.1016/j.cemconres.2007.11.013.

Toutou, Z., Roussel, N., and Lanos, C. (2005). The squeezing test: a tool to identify firm cement-based material’s rheological behaviour and evaluate their extrusion ability. Cement and Concrete Research, 35, 1891–1899.

Trtnik, G., Turk, G., Kavčič, F., and Bosiljkov, V. B. (2008). Possibilities of using the ultrasonic wave transmission method to estimate initial setting time of cement paste. Cement and Concrete Research, 38, 1336–1342. https://doi.org/10.1016/j.cemconres.2008.08.003.

Thrane, L. N., Szabo, P., Geiker, M., Glavind, M., and Stang, H. (2004). Simulation of the test method “L-Box” for self-compacting concrete. Annual Transactions of the NORDIC rheology society, 12, 47–54.

Utsi, S., Emborg, M., and Carlsward, J. (2003). Relation between workability and rheological parameters. In: Third international RILEM symposium, RILEM Pub. PRO, pp. 154–164.

Van Der Vurst, F., Grünewald, S., Feys, D., Lesage, K., Vandewalle, L., Vantomme, J., De Schutter, G. (2017). Effect of the mix design on the robustness of fresh self-compacting concrete. Cement and Concrete Composites 82:190–201. https://doi.org/10.1016/j.cemconcomp.2017.06.005.

Wallevik, J. E. (2009). Rheological properties of cement paste: Thixotropic behavior and structural breakdown. Cement and Concrete Research, 39, 14–29. https://doi.org/10.1016/j.cemconres.2008.10.001.

Wallevik, J. E. (2006). Relationship between the Bingham parameters and slump. Cement and Concrete Research, 36, 1214–1221.

Wangler, T., Lloret, E., Reiter, L., Hack, N., Kohler, M., Bernhard, M., Dillenburger, B., Buchli, J., Roussel, N., and Flatt, R. J. (2016). Digital Concrete: Opportunities and Challenges. RILEM Technical Letters, 1, 67–75. https://doi.org/10.21809/rilemtechlett.2016.16.

Wolfs, R. J. M., Bos, F. P., and Salet, T. A. M. (2018). Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing. Cement and Concrete Research, 106, 103–116. https://doi.org/10.1016/j.cemconres.2018.02.001.

Wallevik, J. E. (2008). Minimizing end-effects in the coaxial cylinders viscometer: Viscoplastic flow inside the ConTec BML Viscometer 3. Journal of Non-Newtonian Fluid Mechanics, 155, 116–123.

Wallevik, J. E. (2015). Parallel Plate Based Measuring System for the ConTec Viscometer–Rheological Measurement of Concrete with Dmax 32 mm. Nordic Concrete 50.

Wallevik, J. E. (2003). Rheology of particle suspensions: fresh concrete, mortar and cement paste with various types of lignosulfonates. Fakultet for ingeniørvitenskap og teknologi.

Wallevik, J. E. (2016). Development of parallel plate-based measuring system for the ConTec viscometer. Newsletter.

Wallevik, O. H., Feys, D., Wallevik, J. E., and Khayat, K. H. (2015). Avoiding inaccurate interpretations of rheological measurements for cement-based materials. Cement and Concrete Research, 78, 100–109.

Wolfs, R. J. M., Bos, F. P., and Salet, T. A. M. (2019). Triaxial compression testing on early age concrete for numerical analysis of 3D concrete printing. Cement and Concrete Composites, 104, 103344. https://doi.org/10.1016/j.cemconcomp.2019.103344.

Wolfs, R. J. M., Bos, F. P., and Salet, T. A. M. (2018). Correlation between destructive compression tests and non-destructive ultrasonic measurements on early age 3D printed concrete. Construction and Building Materials, 181, 447–454. https://doi.org/10.1016/j.conbuildmat.2018.06.060.

Wadsö, L., Winnefeld, F., Riding, K., Sandberg, P. (2016). Calorimetry. In: A Practical Guide to Microstructural Analysis of Cementitious Materials. CRC Press, pp. 56–93.

Yammine, J., Chaouche, M., Guerinet, M., Moranville, M., and Roussel, N. (2008). From ordinary rhelogy concrete to self compacting concrete: A transition between frictional and hydrodynamic interactions. Cement and Concrete Research, 38, 890–896. https://doi.org/10.1016/j.cemconres.2008.03.011.

Yang, M., Neubauer, C. M., and Jennings, H. M. (1997). Interparticle potential and sedimentation behavior of cement suspensions: Review and results from paste. Advanced Cement Based Materials, 5, 1–7. https://doi.org/10.1016/S1065-7355(97)90009-2.

Yuan, Q., Zhou, D., Khayat, K. H., Feys, D., and Shi, C. (2017). On the measurement of evolution of structural build-up of cement paste with time by static yield stress test vs. small amplitude oscillatory shear test. Cement and Concrete Research, 99, 183–189.

Zhou, X., and Li, Z. (2005). Characterization of rheology of fresh fiber reinforced cementitious composites through ram extrusion. Materials and structures, 38, 17–24.

Zhou, X., Li, Z., Fan, M., and Chen, H. (2013). Rheology of semi-solid fresh cement pastes and mortars in orifice extrusion. Cement and Concrete Composites, 37, 304–311.

Zhou, Z., Solomon, M. J., Scales, P. J., and Boger, D. V. (1999). The yield stress of concentrated flocculated suspensions of size distributed particles. Journal of Rheology, 43, 651–671. https://doi.org/10.1122/1.551029.

Titel: Printable Cement-Based Materials: Fresh Properties Measurements and Control
verfasst von: Timothy Wangler
Robert J. Flatt
Nicolas Roussel
Arnaud Perrot
Mohammed Sonebi
Rob Wolfs
Freek Bos
Dirk Lowke
Niklas Freund
Dietmar Stephan
Ursula Pott
Lex Reiter
Steffen Grünewald
Wilson Ricardo Leal da Silva
Geert De Schutter
Verlag: Springer International Publishing
Buch: Digital Fabrication with Cement-Based Materials
Print ISBN: 978-3-030-90534-7

Electronic ISBN: 978-3-030-90535-4

Copyright-Jahr: 2022
DOI: https://doi.org/10.1007/978-3-030-90535-4_4

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"