Skip to main content
main-content

Tipp

Weitere Kapitel dieses Buchs durch Wischen aufrufen

2020 | OriginalPaper | Buchkapitel

Production of Multi-functional and Lightweight Parts with the Use of Topology Optimization and Additive Manufacturing Technique—A Review

verfasst von: J. Durga Prasad Reddy, Debashis Mishra, M. Ajay Kumar

Erschienen in: Advances in Lightweight Materials and Structures

Verlag: Springer Singapore

share
TEILEN

Abstract

Topology optimization (TO) be a technique employed to fill the design space with optimized amount of material based on the satisfaction of design variables. The design variables considered dependent on material properties, load conditions and geometric details. Optimized shape resulted from the TO process may cause manufacturing complexities. Additive manufacturing (AM) is capable of building complex parts. Combination of TO with AM makes an exploration to design areas to produce multi-functional and lightweight objects. AM offers the certain advantages with TO like printing of parts with lattice structures and multiple materials. AM also put constraints like support structure and mesh resolution. This paper briefly reviews the advantages and constrains of AM in combination with TO.

Sie möchten Zugang zu diesem Inhalt erhalten? Dann informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 69.000 Bücher
  • über 500 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Testen Sie jetzt 15 Tage kostenlos.

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 50.000 Bücher
  • über 380 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




Testen Sie jetzt 15 Tage kostenlos.

Literatur
1.
Zurück zum Zitat Zhou M, Raphael F, Sam P, Neil S, Dave M, Simon G (2011) Topology optimization-practical aspects for industrial applications. In: Proceeding in the 9th world congress on structural and multidisciplinary optimization. Shizuoka Zhou M, Raphael F, Sam P, Neil S, Dave M, Simon G (2011) Topology optimization-practical aspects for industrial applications. In: Proceeding in the 9th world congress on structural and multidisciplinary optimization. Shizuoka
2.
Zurück zum Zitat Allaire G, François J, Anca-Maria T (2004) Structural optimization using sensitivity analysis and a level-set method. J Comput Phys 194(1):363–393 Allaire G, François J, Anca-Maria T (2004) Structural optimization using sensitivity analysis and a level-set method. J Comput Phys 194(1):363–393
3.
Zurück zum Zitat Bendsoe MP, Sigmund O (2003) Topology optimization–theory, methods and applications. Springer Bendsoe MP, Sigmund O (2003) Topology optimization–theory, methods and applications. Springer
4.
Zurück zum Zitat Wang, Michael Y, Wang X, Guo D (2003) A level set method for structural topology optimization. Comput Meth Appl Mech Eng 192(1–2):227–246 Wang, Michael Y, Wang X, Guo D (2003) A level set method for structural topology optimization. Comput Meth Appl Mech Eng 192(1–2):227–246
5.
Zurück zum Zitat Zhou S, Qing L (2008) A variational level set method for the topology optimization of steady-state Navier–Stokes flow. J Comput Phys 227(24):10178–10195 Zhou S, Qing L (2008) A variational level set method for the topology optimization of steady-state Navier–Stokes flow. J Comput Phys 227(24):10178–10195
6.
Zurück zum Zitat Ha S-H, Cho S (2005) Topological shape optimization of heat conduction problems using level set approach. Num Heat Trans Part B Fundament 48(1):67–88 Ha S-H, Cho S (2005) Topological shape optimization of heat conduction problems using level set approach. Num Heat Trans Part B Fundament 48(1):67–88
7.
Zurück zum Zitat Yamada T, Kazuhiro I, Shinji N (2011) A level set-based topology optimization method for maximizing thermal diffusivity in problems including design-dependent effects. J Mech Design 133(3):031011 Yamada T, Kazuhiro I, Shinji N (2011) A level set-based topology optimization method for maximizing thermal diffusivity in problems including design-dependent effects. J Mech Design 133(3):031011
8.
Zurück zum Zitat Scott CS (1992) Apparatus and method for creating three-dimensional objects. US Patent 5,121,329 Scott CS (1992) Apparatus and method for creating three-dimensional objects. US Patent 5,121,329
9.
Zurück zum Zitat Hull, CW (1986) Apparatus for production of three-dimensional objects by stereo-lithography. US Patent 4,575,330 Hull, CW (1986) Apparatus for production of three-dimensional objects by stereo-lithography. US Patent 4,575,330
10.
Zurück zum Zitat Meiners W, Wissenbach K, Gasser A (1998) Shaped body especially prototype or replacement part production. DE Patent 19 Meiners W, Wissenbach K, Gasser A (1998) Shaped body especially prototype or replacement part production. DE Patent 19
11.
Zurück zum Zitat Deckard, CR. (1989) Method and apparatus for producing parts by selective sintering. US Patent 4,863,538 Deckard, CR. (1989) Method and apparatus for producing parts by selective sintering. US Patent 4,863,538
12.
Zurück zum Zitat Wu J, Christian D, Rüdiger W (2015) A system for high-resolution topology optimization. IEEE Trans Visual Comput Graphics 22(3):1195–1208 Wu J, Christian D, Rüdiger W (2015) A system for high-resolution topology optimization. IEEE Trans Visual Comput Graphics 22(3):1195–1208
13.
Zurück zum Zitat Mumtaz K, Vora P, Hopkinson N (2011) A method to eliminate anchors/supports from directly laser melted metal powder bed processes. In: Proceedings of the solid freeform fabrication symposium. Austin, TX, USA, pp 8–10 Mumtaz K, Vora P, Hopkinson N (2011) A method to eliminate anchors/supports from directly laser melted metal powder bed processes. In: Proceedings of the solid freeform fabrication symposium. Austin, TX, USA, pp 8–10
14.
Zurück zum Zitat Calignano F (2014) Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting. Mater Des 64:203–213 Calignano F (2014) Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting. Mater Des 64:203–213
15.
Zurück zum Zitat Grégoire A, Dapogny C, Estevez R, Faure A, Michailidis G (2017) Structural optimization under overhang constraints imposed by additive manufacturing technologies. J Comput Phys 351:295–328 Grégoire A, Dapogny C, Estevez R, Faure A, Michailidis G (2017) Structural optimization under overhang constraints imposed by additive manufacturing technologies. J Comput Phys 351:295–328
16.
Zurück zum Zitat Gardan N, Alexandre S (2015) Topological optimization of internal patterns and support in additive manufacturing. J Manuf Syst 37:417–425 Gardan N, Alexandre S (2015) Topological optimization of internal patterns and support in additive manufacturing. J Manuf Syst 37:417–425
17.
Zurück zum Zitat Christiansen AN, Andreas Bærentzen J, Nobel-Jørgensen M, Aage N, Sigmund O (2015) Combined shape and topology optimization of 3D structures. Comput Graphics 46:25–35 Christiansen AN, Andreas Bærentzen J, Nobel-Jørgensen M, Aage N, Sigmund O (2015) Combined shape and topology optimization of 3D structures. Comput Graphics 46:25–35
18.
Zurück zum Zitat Brackett D, Ashcroft I, Hague R (2011) Topology optimization for additive manufacturing. In: Proceedings of the solid freeform fabrication symposium vol. 1. Austin, TX, pp 348–362 Brackett D, Ashcroft I, Hague R (2011) Topology optimization for additive manufacturing. In: Proceedings of the solid freeform fabrication symposium vol. 1. Austin, TX, pp 348–362
19.
Zurück zum Zitat Gaynor AT, James KG (2016) Topology optimization considering overhang constraints: Eliminating sacrificial support material in additive manufacturing through design. Struct Multidis Optimiz 54(5):1157–1172 Gaynor AT, James KG (2016) Topology optimization considering overhang constraints: Eliminating sacrificial support material in additive manufacturing through design. Struct Multidis Optimiz 54(5):1157–1172
20.
Zurück zum Zitat Langelaar MM (2017) An additive manufacturing filter for topology optimization of print-ready designs. Struct Multidisc Optimiz 55(3):871–883 Langelaar MM (2017) An additive manufacturing filter for topology optimization of print-ready designs. Struct Multidisc Optimiz 55(3):871–883
21.
Zurück zum Zitat Mirzendehdel AM, Krishnan S (2016) Support structure constrained topology optimization for additive manufacturing. Comput-Aided Design 81:1–13 Mirzendehdel AM, Krishnan S (2016) Support structure constrained topology optimization for additive manufacturing. Comput-Aided Design 81:1–13
22.
Zurück zum Zitat Qian X (2017) Undercut and overhang angle control in topology optimization: a density gradient based integral approach. Int J Num Meth Eng 111(3):247–272 Qian X (2017) Undercut and overhang angle control in topology optimization: a density gradient based integral approach. Int J Num Meth Eng 111(3):247–272
23.
Zurück zum Zitat Valdevit L, Alan JJ, Julia RG, William BC (2011) Protocols for the optimal design of multi‐functional cellular structures: from hypersonics to micro‐architected materials. J American Ceramic Soc 94: s15–s34 Valdevit L, Alan JJ, Julia RG, William BC (2011) Protocols for the optimal design of multi‐functional cellular structures: from hypersonics to micro‐architected materials. J American Ceramic Soc 94: s15–s34
24.
Zurück zum Zitat Jian X, Mines R, Ghosh R, Vaziri A, Ma L, Ohrndorf A, Christ H-J, Wu L (2015) Advanced micro‐lattice materials. Adv Eng Mater 17(9):1253–1264 Jian X, Mines R, Ghosh R, Vaziri A, Ma L, Ohrndorf A, Christ H-J, Wu L (2015) Advanced micro‐lattice materials. Adv Eng Mater 17(9):1253–1264
25.
Zurück zum Zitat Wang Y, Lei Z, Stephen D, Zhang H, Stefanie FM, Wang Y (2018) Design of graded lattice structure with optimized mesostructures for additive manufacturing. Mater Design 142:114–123 Wang Y, Lei Z, Stephen D, Zhang H, Stefanie FM, Wang Y (2018) Design of graded lattice structure with optimized mesostructures for additive manufacturing. Mater Design 142:114–123
Metadaten
Titel
Production of Multi-functional and Lightweight Parts with the Use of Topology Optimization and Additive Manufacturing Technique—A Review
verfasst von
J. Durga Prasad Reddy
Debashis Mishra
M. Ajay Kumar
Copyright-Jahr
2020
Verlag
Springer Singapore
DOI
https://doi.org/10.1007/978-981-15-7827-4_66

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.