nach oben

Metallurgist

Erschienen in:

16.11.2021

Properties of Oxynitride Steel Coatings Obtained Through Three-Stage Processes of Nitriding Combined with Oxidation

verfasst von: U. R. Boynazarov, L. G. Petrova, A. A. Brezhnev, P. S. Bibikov

Erschienen in: Metallurgist | Ausgabe 7-8/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The article discusses the effect of preliminary oxidation on the properties of 38Cr2MoAl nitrided steel. A three-stage process consisting of pre-oxidation, nitriding, and subsequent vapor oxidation is described. The advantage of three-stage processes over stepwise nitriding is demonstrated in terms of increased wear resistance of the oxynitride layer given different types of lubrication. In addition, oxynitrided steel is characterized by increased strength and ductility during bending tests, as well as higher corrosion resistance in salt spray tests as compared to non-nitrided and chrome-plated steel.

Vorheriger Artikel Increasing the Stability of Mechanical Properties of Semifinished Products from Ti–6Al–4V Alloys by Correcting the Alloying Range and Annealing Modes

Nächster Artikel Metallographic Studies into the Structure and Physicomechanical Properties of Coatings Obtained Using Plasma Methods

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

A. K. Tikhonov, “Development of metal science and heat treatment in metallurgy and the automotive industry,” Metallurg, No. 5, 4–8 (2021).

F. Kahraman, G. M. Gender, C. Yolcu, A. D. Kahraman, and H. Kahraman, “Low-temperature nitriding behavior of compressive deformed AISI 316Ti austenitic stainless steels,” Surf. Rev. Lett., 26, No. 5, 1850188 (2019).

F. A. P. Fernandes, L. C. Casteletti, and J. Gallego, “Low temperature plasma nitriding and nitrocarburising of a superaustenitic stainless steel,” Mater. Perform. Charact., 5, No. 5, 664–674 (2016).

A. B. Korostelev and D. A. Chumak-Zhun’, “Multicomponent diffusion hardening for improving the tribological properties of powder steel products,” Metallurg, No. 9, 70–73 (2008).

Yu. M. Lakhtin, “Oxynitriding (nitrooxidizing),” MiTOM, No. 9, 2–5 (1994).

L. G. Petrova and L. P. Shestopalova, “Oxi-nitriding of alloyed steels with forming of nano-scaled oxide film,” Int. J. Microstruct. Mater. Prop., 9, No. 1, 25–37 (2014).

H.-J. Spies and F. Vogt, “Gasoxinitrieren hochlegierter Stable,” HTM, No. 52, 342–349 (1997).

Ya. D. Kogan and Kh. K. Eshkabilov, “Oxynitriding of metal parts,” Uprochn. Tekhnol. Pokryt., No. 6, 10–15 (2006).

Yu. M. Lakhtin, Ya. D. Kogan, A. E. Mezhonov, V. A. Aleksandrov, and S. P. Bibikov, “Nitriding of structural and corrosionresistant steels in ammonia and air,” Izv. Vuzov. Mashinostr., No. 4, 105–108 (1986).

10.

L. P. Shestopalova, “Specifics of nitride layer formation on chromium steel following pre-oxidation,” Uprochn. Tekhnol. Pokryt., No. 3 (135), 31–38. (2016).

11.

Kh. K. Eshkabilov and Sh. A. Berdiev, “Adjustable nitrooxidizing technology for low-alloy steel,” Int. Sci. аnd Pract. Conf. World Science., 1, No. 2 (6), 69–74. (2016).

12.

L. G. Petrova, V. A. Aleksandrov, and Yu. G. Fomina, “Specifics of nitride layer formation when treating structural steels in ammonia and air,” Uprochn. Tekhnol. Pokryt., No. 2, 5–9 (2005).

13.

Kh. K. Éshkabilov and Sh. A. Berdiev, “Changes in the structure and composition of a nitride layer during water vapor oxidation,” Molod. Uchen., No.14 (118), 204–207 (2016).

14.

I. S. Belashova, P. S. Bibikov, L. G. Petrova, and A. S. Sergeeva, “New nitriding process of high-alloyed maraging steel for cryogenic operation,” IOP Conf. Ser.: Mater. Sci. Eng., 1064, 012004. (2021).CrossRef

15.

I. Altinsoy, G. F. Çelebi Efe, T. Yener, C. Bindal, and K. G. Önder, “Effect of double stage nitriding on 34CrAlNi7–10 nitriding steel,” Acta Phys. Pol. A., 132, No. 3, 663–666 (2017).CrossRef

16.

U. R. Boinazarov and T. Kh. Razzakov, “Microhardness of nitroxide diffusion layers,” Universum: Tekhn. Nauki, No. 7 (76), 44–46 (2020).

Titel: Properties of Oxynitride Steel Coatings Obtained Through Three-Stage Processes of Nitriding Combined with Oxidation
verfasst von: U. R. Boynazarov
L. G. Petrova
A. A. Brezhnev
P. S. Bibikov
Publikationsdatum: 16.11.2021
Verlag: Springer US
Erschienen in: Metallurgist / Ausgabe 7-8/2021
Print ISSN: 0026-0894
Elektronische ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-021-01225-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7-8/2021

Improving the Efficiency of a Blast Furnace and Increasing its Campaign with Mathematical Models Run in Real Time as Part of the Automatic Process Control System

State-of-the-Art and Problems of Bioleaching of Metals from Ash-and-Slag Wastes

First Decanter on the Russian Market for Dewatering Sludge of Blast Furnace Production

Effect of Ti/N Ratio on Impact Strength of High Strength Pipe Steel Welded Joint Heat-Affected Zone

Metallographic Studies into the Structure and Physicomechanical Properties of Coatings Obtained Using Plasma Methods

Development of Methodology for Calculating Parameters of Continuous Deformation of Pipe Billet at Production of Electric-Welded Pipes of Small and Medium Diameter

Premium Partner

Marktübersichten