nach oben

Journal of Material Cycles and Waste Management

Erschienen in:

20.02.2021 | ORIGINAL ARTICLE

Pyrolysis of polypropylene waste using sulfonated carbon catalyst synthesized from sugarcane bagasse

Erschienen in: Journal of Material Cycles and Waste Management | Ausgabe 3/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this study, thermal and catalytic pyrolysis of polypropylene waste (PP) was investigated using a batch reactor in the temperature range 400–460 °C. Sulfonated carbon (SC) from sugarcane bagasse was used as a catalyst for the catalytic pyrolysis of PP. Catalytic pyrolysis of PP was investigated at four different catalyst to polymer ratios (1:20, 1:10, 1:5, and 1:3). The highest yield of catalytic pyrolytic liquid product was obtained at the ratio 1:5 with a liquid yield of 86.14% at 420 °C. The time required for thermal pyrolysis was 70 min and it was reduced to 50 min in catalytic pyrolysis, with a decrease in temperature of 35 °C. Gas chromatography–Mass spectrometry (GC–MS) analysis was carried out for product oil from thermal and catalytic cracking. The results showed that the product oil from catalytic pyrolysis had more light fractions with a carbon distribution of C₈–C₃₃ compared to thermal pyrolysis. Properties of the liquid product were analyzed and it was compared with the properties of diesel and gasoline fuels. Considering the obtained results the economic low-cost catalyst from sugarcane bagasse waste could be more potential in the pyrolysis of PP plastic waste into useful hydrocarbons.

Vorheriger Artikel Recycling bottom ash in production of eco-friendly interlocking concrete paving blocks

Nächster Artikel Quantification of solid waste management system efficiency using input–output indices

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Miandad R, Rehan M, Barakat MA, Aburiazaiza AS (2019) Catalytic pyrolysis of plastic waste: moving toward pyrolysis based biorefineries. Front Energy Res 7:1–17. https://doi.org/10.3389/fenrg.2019.00027CrossRef

Miandad R, Barakat MA, Rehan M et al (2017) Plastic waste to liquid oil through catalytic pyrolysis using natural and synthetic zeolite catalysts. Waste Manage 69:66–78. https://doi.org/10.1016/j.wasman.2017.08.032CrossRef

Wu C, Williams PT (2010) Pyrolysis—gasification of plastics, mixed plastics and real-world plastic waste with and without Ni–Mg–Al catalyst. Fuel 89:3022–3032. https://doi.org/10.1016/j.fuel.2010.05.032CrossRef

Hussain S, Mahmood Z, Ahmad I et al (2010) Low temperature conversion of plastic waste into light hydrocarbons. J Hazard Mater 179:15–20. https://doi.org/10.1016/j.jhazmat.2010.01.134CrossRef

Solak A, Rutkowski P (2014) Bio-oil production by fast pyrolysis of cellulose/polyethylene mixtures in the presence of metal chloride. J Mater Cycles Waste Manage 16:491–499. https://doi.org/10.1007/s10163-013-0204-zCrossRef

Arabiourrutia M, Elordi G, Lopez G et al (2012) Characterization of the waxes obtained by the pyrolysis of polyolefin plastics in a conical spouted bed reactor. J Anal Appl Pyrol 94:230–237. https://doi.org/10.1016/j.jaap.2011.12.012CrossRef

Dog T (2012) Catalytic degradation of polypropylene over alumina loaded mesoporous catalysts. Chem Eng J 207–208:421–425. https://doi.org/10.1016/j.cej.2012.06.146CrossRef

Serrano DP, Otero D, Garcı RA (2005) Catalytic cracking of HDPE over hybrid zeolitic—mesoporous materials. J Anal Appl Pyrol 74:379–386. https://doi.org/10.1016/j.jaap.2004.11.002CrossRef

Soliman A, Farag HA, Nassef E et al (2020) Pyrolysis of low-density polyethylene waste plastics using mixtures of catalysts. J Mater Cycles Waste Manage. https://doi.org/10.1007/s10163-020-01028-zCrossRef

10.

Gobin K, Manos G (2004) Polymer degradation to fuels over microporous catalysts as a novel tertiary plastic recycling method. Polym Degrad Stab 83:267–279. https://doi.org/10.1016/S0141-3910(03)00272-6CrossRef

11.

Na JG, Jeong BH, Chung SH, Kim SS (2006) Pyrolysis of low-density polyethylene using synthetic catalysts produced from fly ash. J Mater Cycles Waste Manage 8:126–132. https://doi.org/10.1007/s10163-006-0156-7CrossRef

12.

Parparita E, Uddin MA, Watanabe T et al (2015) Gas production by steam gasification of polypropylene/biomass waste composites in a dual-bed reactor. J Mater Cycles Waste Manage 17:756–768. https://doi.org/10.1007/s10163-014-0308-0CrossRef

13.

Kassargy C, Awad S, Burnens G et al (2018) Gasoline and diesel-like fuel production by continuous catalytic pyrolysis of waste polyethylene and polypropylene mixtures over USY zeolite. Fuel 224:764–773. https://doi.org/10.1016/j.fuel.2018.03.113CrossRef

14.

Lin Y (2009) Production of valuable hydrocarbons by catalytic degradation of a mixture of post-consumer plastic waste in a fluidized-bed reactor. Polym Degrad Stab 94:1924–1931. https://doi.org/10.1016/j.polymdegradstab.2009.08.004CrossRef

15.

Park K, Jeong Y, Kim J (2019) Activator-assisted pyrolysis of polypropylene. Appl Energy 253:113558. https://doi.org/10.1016/j.apenergy.2019.113558CrossRef

16.

Kumari N, Singh RK (2018) Co-pyrolysis of waste polypropylene and rice bran wax—production of biofuel and its characterization. J Energy Inst. https://doi.org/10.1016/j.joei.2018.07.011CrossRef

17.

Ballice L, Reimert R (2002) Classification of volatile products from the temperature-programmed pyrolysis of polypropylene (PP), atactic-polypropylene (APP) and thermogravimetrically derived kinetics of pyrolysis. Chem Eng Process 41:289–296. https://doi.org/10.1016/S0255-2701(01)00144-1CrossRef

18.

Chi Y, Xue J, Zhuo J et al (2018) Science of the total environment catalytic co-pyrolysis of cellulose and polypropylene over all-silica mesoporous catalyst MCM-41 and Al-MCM-41. Sci Total Environ 633:1105–1113. https://doi.org/10.1016/j.scitotenv.2018.03.239CrossRef

19.

Duan D, Wang Y, Dai L et al (2017) Ex-situ catalyti o-pyrolysis of lignin and polypropylene to upgrade bio-oil quality by microwave heating. Bioresour Technol 241:207–213. https://doi.org/10.1016/j.biortech.2017.04.104CrossRef

20.

Hamid H, Armando Y (2014) Evaluation of pyrolysis process parameters on polypropylene degradation products. J Anal Appl Pyrol 109:272–277. https://doi.org/10.1016/j.jaap.2014.05.023CrossRef

21.

Kang S, Ye J, Chang J (2013) Recent advances in carbon-based sulfonated catalyst: preparation and application. Int Rev Chem Eng (IRECHE) 5:133–144. ISSN 2035-1755

22.

Lou W-Y, Guo Q, Chen W-J et al (2012) A highly active bagasse-derived solid acid catalyst with properties suitable for production of biodiesel. Chemsuschem 5:1533–1541. https://doi.org/10.1002/cssc.201100811CrossRef

23.

Lee D (2013) Preparation of a sulfonated carbonaceous material from lignosulfonate and its usefulness as an esterification catalyst. Molecules 18:8168–8180. https://doi.org/10.3390/molecules18078168CrossRef

24.

Benak KR, Dominguez L, Economy J, Mangun CL (2002) Sulfonation of pyropolymeric fibers derived from phenol-formaldehyde resins. Carbon 40:2323–2332. https://doi.org/10.1016/S0008-6223(02)00146-XCrossRef

25.

Prathiba R, Shruthi M, Miranda LR (2018) Pyrolysis of polystyrene waste in the presence of activated carbon in conventional and microwave heating using modified thermocouple. Waste Manage 76:528–536. https://doi.org/10.1016/j.wasman.2018.03.029CrossRef

26.

Dewangan A, Pradhan D, Singh RK (2016) Co-pyrolysis of sugarcane bagasse and low-density polyethylene : Influence of plastic on pyrolysis product yield. Fuel 185:508–516. https://doi.org/10.1016/j.fuel.2016.08.011CrossRef

27.

Suganuma S, Nakajima K, Kitano M, Yamaguchi D (2008) Hydrolysis of cellulose by amorphous carbon bearing SO 3 H, COOH, and OH Groups. J Am Chem Soc 130:12787–12793. https://doi.org/10.1021/ja803983hCrossRef

28.

Ezebor F, Khairuddean M, Abdullah AZ, Boey PL (2014) Oil palm trunk and sugarcane bagasse derived solid acid catalysts for rapid esterification of fatty acids and moisture-assisted transesterification of oils under pseudo-infinite methanol. Bioresour Technol 157:254–262. https://doi.org/10.1016/j.biortech.2014.01.110CrossRef

29.

Jung S, Cho M, Kang B, Kim J (2010) Pyrolysis of a fraction of waste polypropylene and polyethylene for the recovery of BTX aromatics using a fluidized bed reactor. Fuel Process Technol 91:277–284. https://doi.org/10.1016/j.fuproc.2009.10.009CrossRef

30.

Akpanudoh NS, Gobin K, Manos G (2005) Catalytic degradation of plastic waste to liquid fuel over commercial cracking catalysts Effect of polymer to catalyst ratio/acidity content. J Mol Catal A: Chem 235:67–73. https://doi.org/10.1016/j.molcata.2005.03.009CrossRef

31.

Ahmad I, Khan MI, Khan H et al (2015) Pyrolysis study of polypropylene and polyethylene into premium oil products. Int J Green Energy 12:663–671. https://doi.org/10.1080/15435075.2014.880146CrossRef

32.

Wang J, Zhong Z, Song Z et al (2016) Modification and regeneration of HZSM-5 catalyst in microwave assisted catalytic fast pyrolysis of mushroom waste. Energy Convers Manage 123:29–34. https://doi.org/10.1016/j.enconman.2016.06.024CrossRef

Titel: Pyrolysis of polypropylene waste using sulfonated carbon catalyst synthesized from sugarcane bagasse
Publikationsdatum: 20.02.2021
Erschienen in: Journal of Material Cycles and Waste Management / Ausgabe 3/2021
Print ISSN: 1438-4957
Elektronische ISSN: 1611-8227
DOI: https://doi.org/10.1007/s10163-021-01188-6

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2021

Adsorption of Pb2+ by insolubilized humic acid extracted from sewage sludge

Comparison of composting of chemically pretreated and fermented sugarcane bagasse for zero-waste biorefinery

Correction to: Advanced fabrication and multi-properties of aluminium hydroxide aerogels from aluminium wastes

Applying machine learning approach in recycling

Assessment of biological effects and harm to Japanese medaka due to carbonized carbon fibers generated by a pyrolysis carbon fiber recycling process

Geopolymer synthesized from spent fluid catalytic cracking catalyst and its heavy metal immobilization behavior