Skip to main content
Erschienen in: Journal of Materials Engineering and Performance 2/2018

16.01.2018

Quantitative Studies of Machining-Induced Microstructure Alteration and Plastic Deformation in AISI 316 Stainless Steel Using EBSD

verfasst von: Wenqian Zhang, Xuelin Wang, Yujin Hu, Siyang Wang

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 2/2018

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Surface machining can result in a heavily plastic deformed layer in the subsurface. The microstructure alterations and the extent of plastic deformation of a milled 316 austenitic stainless steel were investigated using electron backscatter diffraction (EBSD) technique in this study. The microstructure alteration of the deformed layer was characterized by the generation of grain and subgrain boundaries. The plastic deformation was evaluated by kernel average misorientation (KAM) and grain average misorientation (GAM). The local deformation within grains was assessed by the misorientation from adjacent point (MFAP). The EBSD results indicated gradients of microstructure and plastic deformation along the depth direction. High-angle grain boundaries were generated within the depth of 40 μm, and subgrain boundaries were produced up to the depth of 150 μm. Estimated by KAM and GAM, the plastic strain was about 0.7 at the depth of 25 μm and decreased to 0.1 at the depth of 115 μm The MFAP analysis revealed that the local deformation varied within individual grains. Additionally, the change of micro-hardness along the depth direction showed a strong correlation with KAM and GAM values.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Anhänge
Nur mit Berechtigung zugänglich
Literatur
1.
2.
Zurück zum Zitat I. Jawahir, E. Brinksmeier, R. M’saoubi, D. Aspinwall, J. Outeiro, D. Meyer, D. Umbrello, and A. Jayal, Surface Integrity in Material Removal Processes: Recent Advances, CIRP Ann. Manuf. Technol., 2011, 60(2), p 603–626CrossRef I. Jawahir, E. Brinksmeier, R. M’saoubi, D. Aspinwall, J. Outeiro, D. Meyer, D. Umbrello, and A. Jayal, Surface Integrity in Material Removal Processes: Recent Advances, CIRP Ann. Manuf. Technol., 2011, 60(2), p 603–626CrossRef
3.
Zurück zum Zitat R. M’Saoubi, J. Outeiro, H. Chandrasekaran, O. Dillon, Jr., and I. Jawahir, A Review of Surface Integrity in Machining and Its Impact on Functional Performance and Life of Machined Products, International Journal of Sustainable Manufacturing, 2008, 1(1–2), p 203–236CrossRef R. M’Saoubi, J. Outeiro, H. Chandrasekaran, O. Dillon, Jr., and I. Jawahir, A Review of Surface Integrity in Machining and Its Impact on Functional Performance and Life of Machined Products, International Journal of Sustainable Manufacturing, 2008, 1(1–2), p 203–236CrossRef
4.
Zurück zum Zitat S. Ghosh and V. Kain, Microstructural Changes in AISI, 304L Stainless Steel Due to Surface Machining: Effect on Its Susceptibility to Chloride Stress Corrosion Cracking, J. Nucl. Mater., 2010, 403(1), p 62–67CrossRef S. Ghosh and V. Kain, Microstructural Changes in AISI, 304L Stainless Steel Due to Surface Machining: Effect on Its Susceptibility to Chloride Stress Corrosion Cracking, J. Nucl. Mater., 2010, 403(1), p 62–67CrossRef
5.
Zurück zum Zitat S.G. Acharyya, A. Khandelwal, V. Kain, A. Kumar, and I. Samajdar, Surface Working of 304L Stainless Steel: Impact on Microstructure, Electrochemical Behavior and SCC Resistance, Mater. Charact., 2012, 72, p 68–76CrossRef S.G. Acharyya, A. Khandelwal, V. Kain, A. Kumar, and I. Samajdar, Surface Working of 304L Stainless Steel: Impact on Microstructure, Electrochemical Behavior and SCC Resistance, Mater. Charact., 2012, 72, p 68–76CrossRef
6.
Zurück zum Zitat D. Novovic, R. Dewes, D. Aspinwall, W. Voice, and P. Bowen, The Effect of Machined Topography and Integrity on Fatigue Life, Int. J. Mach. Tools Manuf, 2004, 44(2), p 125–134CrossRef D. Novovic, R. Dewes, D. Aspinwall, W. Voice, and P. Bowen, The Effect of Machined Topography and Integrity on Fatigue Life, Int. J. Mach. Tools Manuf, 2004, 44(2), p 125–134CrossRef
7.
Zurück zum Zitat A. Javidi, U. Rieger, and W. Eichlseder, The Effect of Machining on the Surface Integrity and Fatigue Life, Int. J. Fatigue, 2008, 30(10), p 2050–2055CrossRef A. Javidi, U. Rieger, and W. Eichlseder, The Effect of Machining on the Surface Integrity and Fatigue Life, Int. J. Fatigue, 2008, 30(10), p 2050–2055CrossRef
8.
Zurück zum Zitat F. Hashimoto, Y. Guo, and A. Warren, Surface Integrity Difference Between Hard Turned and Ground Surfaces and Its Impact on Fatigue Life, CIRP Ann. Manuf. Technol., 2006, 55(1), p 81–84CrossRef F. Hashimoto, Y. Guo, and A. Warren, Surface Integrity Difference Between Hard Turned and Ground Surfaces and Its Impact on Fatigue Life, CIRP Ann. Manuf. Technol., 2006, 55(1), p 81–84CrossRef
9.
Zurück zum Zitat W. Zhang, K. Fang, Y. Hu, S. Wang, and X. Wang, Effect of Machining-Induced Surface Residual Stress on Initiation of Stress Corrosion Cracking in 316 Austenitic Stainless Steel, Corros. Sci., 2016, 108, p 173–184CrossRef W. Zhang, K. Fang, Y. Hu, S. Wang, and X. Wang, Effect of Machining-Induced Surface Residual Stress on Initiation of Stress Corrosion Cracking in 316 Austenitic Stainless Steel, Corros. Sci., 2016, 108, p 173–184CrossRef
10.
Zurück zum Zitat Y. Sueishi, A. Kohyama, H. Kinoshita, M. Narui, and K. Fukumoto, Microstructure and Nano-hardness Analyses of Stress Corrosion Cracking, Utilizing 316L Core Shroud of BWR Power Reactors, Fusion Eng. Des., 2006, 81(8), p 1099–1103CrossRef Y. Sueishi, A. Kohyama, H. Kinoshita, M. Narui, and K. Fukumoto, Microstructure and Nano-hardness Analyses of Stress Corrosion Cracking, Utilizing 316L Core Shroud of BWR Power Reactors, Fusion Eng. Des., 2006, 81(8), p 1099–1103CrossRef
11.
Zurück zum Zitat G. Van Boven, W. Chen, and R. Rogge, The Role of Residual Stress in Neutral pH Stress Corrosion Cracking of Pipeline Steels, Part I: Pitting and cracking occurrence, Acta Materialia, 2007, 55(1), p 29–42 G. Van Boven, W. Chen, and R. Rogge, The Role of Residual Stress in Neutral pH Stress Corrosion Cracking of Pipeline Steels, Part I: Pitting and cracking occurrence, Acta Materialia, 2007, 55(1), p 29–42
12.
Zurück zum Zitat S. To, W. Lee, and C. Cheung, Orientation Changes of Aluminium Single Crystals in Ultra-Precision Diamond Turning, J. Mater. Process. Technol., 2003, 140(1), p 346–351CrossRef S. To, W. Lee, and C. Cheung, Orientation Changes of Aluminium Single Crystals in Ultra-Precision Diamond Turning, J. Mater. Process. Technol., 2003, 140(1), p 346–351CrossRef
13.
Zurück zum Zitat G. Krolczyk, P. Nieslony, and S. Legutko, Microhardness and Surface Integrity in Turning Process of Duplex Stainless Steel (DSS) for Different Cutting Conditions, J. Mater. Eng. Perform., 2014, 23(3), p 859–866CrossRef G. Krolczyk, P. Nieslony, and S. Legutko, Microhardness and Surface Integrity in Turning Process of Duplex Stainless Steel (DSS) for Different Cutting Conditions, J. Mater. Eng. Perform., 2014, 23(3), p 859–866CrossRef
14.
Zurück zum Zitat Y. Kaynak, Machining and Phase Transformation Response of Room-Temperature Austenitic NiTi Shape Memory Alloy, J. Mater. Eng. Perform., 2014, 23(9), p 3354–3360CrossRef Y. Kaynak, Machining and Phase Transformation Response of Room-Temperature Austenitic NiTi Shape Memory Alloy, J. Mater. Eng. Perform., 2014, 23(9), p 3354–3360CrossRef
15.
Zurück zum Zitat S. Cai, Y. Chen, G. Ye, M. Jiang, H. Wang, and L. Dai, Characterization of the Deformation Field in Large-Strain Extrusion Machining, J. Mater. Process. Technol., 2015, 216, p 48–58CrossRef S. Cai, Y. Chen, G. Ye, M. Jiang, H. Wang, and L. Dai, Characterization of the Deformation Field in Large-Strain Extrusion Machining, J. Mater. Process. Technol., 2015, 216, p 48–58CrossRef
16.
Zurück zum Zitat Z. Pu, J. Outeiro, A. Batista, O. Dillon, D. Puleo, and I. Jawahir, Enhanced Surface Integrity of AZ31B Mg Alloy by Cryogenic Machining Towards Improved Functional Performance of Machined Components, Int. J. Mach. Tools Manuf, 2012, 56, p 17–27CrossRef Z. Pu, J. Outeiro, A. Batista, O. Dillon, D. Puleo, and I. Jawahir, Enhanced Surface Integrity of AZ31B Mg Alloy by Cryogenic Machining Towards Improved Functional Performance of Machined Components, Int. J. Mach. Tools Manuf, 2012, 56, p 17–27CrossRef
17.
Zurück zum Zitat H. Safari, S. Sharif, S. Izman, and H. Jafari, Surface Integrity Characterization in High-Speed Dry End Milling of Ti-6Al-4V Titanium Alloy, Int. J. Adv. Manuf. Technol., 2015, 78(1–4), p 651–657CrossRef H. Safari, S. Sharif, S. Izman, and H. Jafari, Surface Integrity Characterization in High-Speed Dry End Milling of Ti-6Al-4V Titanium Alloy, Int. J. Adv. Manuf. Technol., 2015, 78(1–4), p 651–657CrossRef
18.
Zurück zum Zitat Y. Liu, H. Li, and M. Li, Characterization of Surface Layer in TC17 Alloy Treated by Air Blast Shot Peening, Mater. Des., 2015, 65, p 120–126CrossRef Y. Liu, H. Li, and M. Li, Characterization of Surface Layer in TC17 Alloy Treated by Air Blast Shot Peening, Mater. Des., 2015, 65, p 120–126CrossRef
19.
Zurück zum Zitat Y. Kaynak, H. Tobe, R. Noebe, H. Karaca, and I. Jawahir, The Effects of Machining on the Microstructure and Transformation Behavior of NiTi Alloy, Scripta Mater., 2014, 74, p 60–63CrossRef Y. Kaynak, H. Tobe, R. Noebe, H. Karaca, and I. Jawahir, The Effects of Machining on the Microstructure and Transformation Behavior of NiTi Alloy, Scripta Mater., 2014, 74, p 60–63CrossRef
20.
Zurück zum Zitat M. Imran, P.T. Mativenga, A. Gholinia, and P.J. Withers, Evaluation of Surface Integrity in Micro Drilling Process for Nickel-Based Superalloy, Int. J. Adv. Manuf. Technol., 2011, 55(5–8), p 465–476CrossRef M. Imran, P.T. Mativenga, A. Gholinia, and P.J. Withers, Evaluation of Surface Integrity in Micro Drilling Process for Nickel-Based Superalloy, Int. J. Adv. Manuf. Technol., 2011, 55(5–8), p 465–476CrossRef
21.
Zurück zum Zitat G. Rotella, O. Dillon, Jr., D. Umbrello, L. Settineri, and I. Jawahir, The Effects of Cooling Conditions on Surface Integrity in Machining of Ti6Al4V Alloy, Int. J. Adv. Manuf. Technol., 2014, 71(1–4), p 47–55CrossRef G. Rotella, O. Dillon, Jr., D. Umbrello, L. Settineri, and I. Jawahir, The Effects of Cooling Conditions on Surface Integrity in Machining of Ti6Al4V Alloy, Int. J. Adv. Manuf. Technol., 2014, 71(1–4), p 47–55CrossRef
22.
Zurück zum Zitat D. Umbrello, Investigation of Surface Integrity in Dry Machining of Inconel 718, Int. J. Adv. Manuf. Technol., 2013, 69(9–12), p 2183–2190CrossRef D. Umbrello, Investigation of Surface Integrity in Dry Machining of Inconel 718, Int. J. Adv. Manuf. Technol., 2013, 69(9–12), p 2183–2190CrossRef
23.
Zurück zum Zitat P. Horodek, K. Siemek, J. Dryzek, A. Kobets, and M. Wróbel, Positron Annihilation and Complementary Studies of Stainless Steel Exposed to Sandblasting at Different Angles, Tribol. Lett., 2017, 65(1), p 30CrossRef P. Horodek, K. Siemek, J. Dryzek, A. Kobets, and M. Wróbel, Positron Annihilation and Complementary Studies of Stainless Steel Exposed to Sandblasting at Different Angles, Tribol. Lett., 2017, 65(1), p 30CrossRef
24.
Zurück zum Zitat J. Dryzek and P. Horodek, Positron Annihilation Studies of the Near-Surface Regions of Niobium Before and After Wear Treatment, Tribol. Lett., 2017, 65(4), p 117CrossRef J. Dryzek and P. Horodek, Positron Annihilation Studies of the Near-Surface Regions of Niobium Before and After Wear Treatment, Tribol. Lett., 2017, 65(4), p 117CrossRef
25.
Zurück zum Zitat P. Horodek, J. Dryzek, and M. Wróbel, Positron Annihilation Study of Defects Induced by Various Cutting Methods in Stainless Steel Grade 304, Tribol. Lett., 2012, 45(2), p 341–347CrossRef P. Horodek, J. Dryzek, and M. Wróbel, Positron Annihilation Study of Defects Induced by Various Cutting Methods in Stainless Steel Grade 304, Tribol. Lett., 2012, 45(2), p 341–347CrossRef
26.
Zurück zum Zitat J. Dryzek, P. Horodek, and M. Wróbel, Use of Positron Annihilation Measurements to Detect the Defect Beneath Worn Surface of Stainless Steel 1.4301 (EN) Under Dry Sliding Condition, Wear, 2012, 294, p 264–269CrossRef J. Dryzek, P. Horodek, and M. Wróbel, Use of Positron Annihilation Measurements to Detect the Defect Beneath Worn Surface of Stainless Steel 1.4301 (EN) Under Dry Sliding Condition, Wear, 2012, 294, p 264–269CrossRef
27.
Zurück zum Zitat R. M’Saoubi and L. Ryde, Application of the EBSD Technique for the Characterisation of Deformation Zones in Metal Cutting, Mater. Sci. Eng., A, 2005, 405(1), p 339–349CrossRef R. M’Saoubi and L. Ryde, Application of the EBSD Technique for the Characterisation of Deformation Zones in Metal Cutting, Mater. Sci. Eng., A, 2005, 405(1), p 339–349CrossRef
28.
Zurück zum Zitat H. Touazine, M. Jahazi, and P. Bocher, Accurate Determination of Damaged Subsurface Layers in Machined Inconel 718, Int. J. Adv. Manuf. Technol., 2017, 88(9), p 3419–3427CrossRef H. Touazine, M. Jahazi, and P. Bocher, Accurate Determination of Damaged Subsurface Layers in Machined Inconel 718, Int. J. Adv. Manuf. Technol., 2017, 88(9), p 3419–3427CrossRef
29.
Zurück zum Zitat A. Yamamoto, T. Yamada, S. Nakahigashi, L. Liu, M. Terasawa, and H. Tsubakino, Effects of Surface Grinding on Hardness Distribution and Residual Stress in Low Carbon Austenitic Stainless Steel SUS316L, ISIJ Int., 2004, 44(10), p 1780–1782CrossRef A. Yamamoto, T. Yamada, S. Nakahigashi, L. Liu, M. Terasawa, and H. Tsubakino, Effects of Surface Grinding on Hardness Distribution and Residual Stress in Low Carbon Austenitic Stainless Steel SUS316L, ISIJ Int., 2004, 44(10), p 1780–1782CrossRef
30.
Zurück zum Zitat S. Bissey-Breton, V. Vignal, F. Herbst, and J. Coudert, Influence of Machining on the Microstructure, Mechanical Properties and Corrosion Behaviour of a Low Carbon Martensitic Stainless Steel, Procedia CIRP, 2016, 46, p 331–335CrossRef S. Bissey-Breton, V. Vignal, F. Herbst, and J. Coudert, Influence of Machining on the Microstructure, Mechanical Properties and Corrosion Behaviour of a Low Carbon Martensitic Stainless Steel, Procedia CIRP, 2016, 46, p 331–335CrossRef
31.
Zurück zum Zitat J. Outeiro, S. Campocasso, L. Denguir, G. Fromentin, V. Vignal, and G. Poulachon, Experimental and Numerical Assessment of Subsurface Plastic Deformation Induced by OFHC Copper Machining, CIRP Ann. Manuf. Technol., 2015, 64(1), p 53–56CrossRef J. Outeiro, S. Campocasso, L. Denguir, G. Fromentin, V. Vignal, and G. Poulachon, Experimental and Numerical Assessment of Subsurface Plastic Deformation Induced by OFHC Copper Machining, CIRP Ann. Manuf. Technol., 2015, 64(1), p 53–56CrossRef
32.
Zurück zum Zitat S. Choudhary, V. Nanda, S. Shekhar, A. Garg, and K. Mondal, Effect of Microstructural Anisotropy on the Electrochemical Behavior of Rolled Mild Steel, J. Mater. Eng. Perform., 2017, 26(1), p 185–194CrossRef S. Choudhary, V. Nanda, S. Shekhar, A. Garg, and K. Mondal, Effect of Microstructural Anisotropy on the Electrochemical Behavior of Rolled Mild Steel, J. Mater. Eng. Perform., 2017, 26(1), p 185–194CrossRef
33.
Zurück zum Zitat Z. Long, T. Liu, J. He, Y. Zhang, and F. Pan, The Effects of Pre-strain and Subsequent Annealing on the Yielding Behavior in a Rolled Magnesium Alloy AZ31, J. Mater. Eng. Perform., 2015, 24(1), p 16–23CrossRef Z. Long, T. Liu, J. He, Y. Zhang, and F. Pan, The Effects of Pre-strain and Subsequent Annealing on the Yielding Behavior in a Rolled Magnesium Alloy AZ31, J. Mater. Eng. Perform., 2015, 24(1), p 16–23CrossRef
34.
Zurück zum Zitat M. Kamaya, Measurement of Local Plastic Strain Distribution of Stainless Steel by Electron Backscatter Diffraction, Mater. Charact., 2009, 60(2), p 125–132CrossRef M. Kamaya, Measurement of Local Plastic Strain Distribution of Stainless Steel by Electron Backscatter Diffraction, Mater. Charact., 2009, 60(2), p 125–132CrossRef
35.
Zurück zum Zitat M. Kamaya, A.J. Wilkinson, and J.M. Titchmarsh, Measurement of Plastic Strain of Polycrystalline Material by Electron Backscatter Diffraction, Nucl. Eng. Des., 2005, 235(6), p 713–725CrossRef M. Kamaya, A.J. Wilkinson, and J.M. Titchmarsh, Measurement of Plastic Strain of Polycrystalline Material by Electron Backscatter Diffraction, Nucl. Eng. Des., 2005, 235(6), p 713–725CrossRef
36.
Zurück zum Zitat S.I. Wright, M.M. Nowell, and D.P. Field, A Review of Strain Analysis Using Electron Backscatter Diffraction, Microsc. Microanal., 2011, 17(03), p 316–329CrossRef S.I. Wright, M.M. Nowell, and D.P. Field, A Review of Strain Analysis Using Electron Backscatter Diffraction, Microsc. Microanal., 2011, 17(03), p 316–329CrossRef
37.
Zurück zum Zitat S.I. Wright and M.M. Nowell, EBSD Image Quality Mapping, Microsc. Microanal., 2006, 12(01), p 72–84CrossRef S.I. Wright and M.M. Nowell, EBSD Image Quality Mapping, Microsc. Microanal., 2006, 12(01), p 72–84CrossRef
38.
Zurück zum Zitat S. Wardle, L. Lin, A. Cetel, B. Adams, Orientation Imaging Microscopy: Monitoring Residual Stress Profiles in Single Crystals Using an Image-Quality Parameter, IQ, in Proceedings of the Annual Meeting-Electron Microscopy Society of America (San Francisco Press, 1994), pp 680 S. Wardle, L. Lin, A. Cetel, B. Adams, Orientation Imaging Microscopy: Monitoring Residual Stress Profiles in Single Crystals Using an Image-Quality Parameter, IQ, in Proceedings of the Annual Meeting-Electron Microscopy Society of America (San Francisco Press, 1994), pp 680
39.
Zurück zum Zitat D.N. Githinji, S.M. Northover, P.J. Bouchard, and M.A. Rist, An EBSD Study of the Deformation of Service-Aged 316 Austenitic Steel, Metallurgical and Materials Transactions A, 2013, 44(9), p 4150–4167CrossRef D.N. Githinji, S.M. Northover, P.J. Bouchard, and M.A. Rist, An EBSD Study of the Deformation of Service-Aged 316 Austenitic Steel, Metallurgical and Materials Transactions A, 2013, 44(9), p 4150–4167CrossRef
40.
Zurück zum Zitat R. Yoda, T. Yokomaku, and N. Tsuji, Plastic Deformation and Creep Damage Evaluations of Type 316 Austenitic Stainless Steels by EBSD, Mater. Charact., 2010, 61(10), p 913–922CrossRef R. Yoda, T. Yokomaku, and N. Tsuji, Plastic Deformation and Creep Damage Evaluations of Type 316 Austenitic Stainless Steels by EBSD, Mater. Charact., 2010, 61(10), p 913–922CrossRef
41.
Zurück zum Zitat M. Kamaya, A.J. Wilkinson, and J.M. Titchmarsh, Quantification of Plastic Strain of Stainless Steel and Nickel Alloy by Electron Backscatter Diffraction, Acta Mater., 2006, 54(2), p 539–548CrossRef M. Kamaya, A.J. Wilkinson, and J.M. Titchmarsh, Quantification of Plastic Strain of Stainless Steel and Nickel Alloy by Electron Backscatter Diffraction, Acta Mater., 2006, 54(2), p 539–548CrossRef
42.
Zurück zum Zitat M. Kamaya, Assessment of Local Deformation Using EBSD: Quantification of Accuracy of Measurement and Definition of Local Gradient, Ultramicroscopy, 2011, 111(8), p 1189–1199CrossRef M. Kamaya, Assessment of Local Deformation Using EBSD: Quantification of Accuracy of Measurement and Definition of Local Gradient, Ultramicroscopy, 2011, 111(8), p 1189–1199CrossRef
43.
Zurück zum Zitat M. Jedrychowski, J. Tarasiuk, B. Bacroix, and S. Wronski, Electron Backscatter Diffraction Investigation of Local Misorientations and Orientation Gradients in Connection with Evolution of Grain Boundary Structures in Deformed and Annealed Zirconium. A New Approach in Grain Boundary Analysis, J. Appl. Crystallogr., 2013, 46(2), p 483–492CrossRef M. Jedrychowski, J. Tarasiuk, B. Bacroix, and S. Wronski, Electron Backscatter Diffraction Investigation of Local Misorientations and Orientation Gradients in Connection with Evolution of Grain Boundary Structures in Deformed and Annealed Zirconium. A New Approach in Grain Boundary Analysis, J. Appl. Crystallogr., 2013, 46(2), p 483–492CrossRef
44.
Zurück zum Zitat N. Saeidi, F. Ashrafizadeh, B. Niroumand, and F. Barlat, EBSD Study of Damage Mechanisms in a High-Strength Ferrite-Martensite Dual-Phase Steel, J. Mater. Eng. Perform., 2015, 24(1), p 53–58CrossRef N. Saeidi, F. Ashrafizadeh, B. Niroumand, and F. Barlat, EBSD Study of Damage Mechanisms in a High-Strength Ferrite-Martensite Dual-Phase Steel, J. Mater. Eng. Perform., 2015, 24(1), p 53–58CrossRef
45.
Zurück zum Zitat H. Ding and Y.C. Shin, Dislocation Density-Based Modeling of Subsurface Grain Refinement with Laser-Induced Shock Compression, Comput. Mater. Sci., 2012, 53(1), p 79–88CrossRef H. Ding and Y.C. Shin, Dislocation Density-Based Modeling of Subsurface Grain Refinement with Laser-Induced Shock Compression, Comput. Mater. Sci., 2012, 53(1), p 79–88CrossRef
46.
Zurück zum Zitat R.W. Maruda, G.M. Krolczyk, M. Michalski, P. Nieslony, and S. Wojciechowski, Structural and Microhardness Changes After Turning of the AISI, 1045 Steel for Minimum Quantity Cooling Lubrication, J. Mater. Eng. Perform., 2017, 26(1), p 431–438CrossRef R.W. Maruda, G.M. Krolczyk, M. Michalski, P. Nieslony, and S. Wojciechowski, Structural and Microhardness Changes After Turning of the AISI, 1045 Steel for Minimum Quantity Cooling Lubrication, J. Mater. Eng. Perform., 2017, 26(1), p 431–438CrossRef
47.
Zurück zum Zitat M. Chemkhi, D. Retraint, A. Roos, C. Garnier, L. Waltz, C. Demangel, and G. Proust, The Effect of Surface Mechanical Attrition Treatment on Low Temperature Plasma Nitriding of an Austenitic Stainless Steel, Surf. Coat. Technol., 2013, 221, p 191–195CrossRef M. Chemkhi, D. Retraint, A. Roos, C. Garnier, L. Waltz, C. Demangel, and G. Proust, The Effect of Surface Mechanical Attrition Treatment on Low Temperature Plasma Nitriding of an Austenitic Stainless Steel, Surf. Coat. Technol., 2013, 221, p 191–195CrossRef
48.
Zurück zum Zitat S. Bagherifard, S. Slawik, I. Fernández-Pariente, C. Pauly, F. Mücklich, and M. Guagliano, Nanoscale Surface Modification of AISI, 316L Stainless Steel by Severe Shot Peening, Mater. Des., 2016, 102, p 68–77CrossRef S. Bagherifard, S. Slawik, I. Fernández-Pariente, C. Pauly, F. Mücklich, and M. Guagliano, Nanoscale Surface Modification of AISI, 316L Stainless Steel by Severe Shot Peening, Mater. Des., 2016, 102, p 68–77CrossRef
49.
Zurück zum Zitat Y. Lino, T.Y. Kim, and S.D. Mun, Machined Surface Plastic Strain in Orthogonal Cutting by Subsequent Recrystallizations Technique, Wear, 1996, 199(2), p 211–216CrossRef Y. Lino, T.Y. Kim, and S.D. Mun, Machined Surface Plastic Strain in Orthogonal Cutting by Subsequent Recrystallizations Technique, Wear, 1996, 199(2), p 211–216CrossRef
50.
Zurück zum Zitat N.B. Moussa, H. Sidhom, and C. Braham, Numerical and Experimental Analysis of Residual Stress and Plastic Strain Distributions in Machined Stainless Steel, Int. J. Mech. Sci., 2012, 65(1), p 82–93CrossRef N.B. Moussa, H. Sidhom, and C. Braham, Numerical and Experimental Analysis of Residual Stress and Plastic Strain Distributions in Machined Stainless Steel, Int. J. Mech. Sci., 2012, 65(1), p 82–93CrossRef
51.
Zurück zum Zitat Z. Atmani, B. Haddag, M. Nouari, and M. Zenasni, Combined Microstructure-Based Flow Stress and Grain Size Evolution Models for Multi-physics Modelling of Metal Machining, Int. J. Mech. Sci., 2016, 118, p 77–90CrossRef Z. Atmani, B. Haddag, M. Nouari, and M. Zenasni, Combined Microstructure-Based Flow Stress and Grain Size Evolution Models for Multi-physics Modelling of Metal Machining, Int. J. Mech. Sci., 2016, 118, p 77–90CrossRef
52.
Zurück zum Zitat H. Ding and Y.C. Shin, Multi-physics Modeling and Simulations of Surface Microstructure Alteration in Hard Turning, J. Mater. Process. Technol., 2013, 213(6), p 877–886CrossRef H. Ding and Y.C. Shin, Multi-physics Modeling and Simulations of Surface Microstructure Alteration in Hard Turning, J. Mater. Process. Technol., 2013, 213(6), p 877–886CrossRef
53.
Zurück zum Zitat M. Martin, S. Weber, C. Izawa, S. Wagner, A. Pundt, and W. Theisen, Influence of Machining-Induced Martensite on Hydrogen-Assisted Fracture of AISI, Type 304 Austenitic Stainless Steel, Int. J. Hydrogen Energy, 2011, 36(17), p 11195–11206CrossRef M. Martin, S. Weber, C. Izawa, S. Wagner, A. Pundt, and W. Theisen, Influence of Machining-Induced Martensite on Hydrogen-Assisted Fracture of AISI, Type 304 Austenitic Stainless Steel, Int. J. Hydrogen Energy, 2011, 36(17), p 11195–11206CrossRef
54.
Zurück zum Zitat S.W. Kim, S.S. Hwang, Y.S. Lim, Effect of Residual Strain Induced by Cold Working on PWSCC of Alloy 690, in Transactions of the Korean Nuclear Society Autumn Meeting (2013) S.W. Kim, S.S. Hwang, Y.S. Lim, Effect of Residual Strain Induced by Cold Working on PWSCC of Alloy 690, in Transactions of the Korean Nuclear Society Autumn Meeting (2013)
Metadaten
Titel
Quantitative Studies of Machining-Induced Microstructure Alteration and Plastic Deformation in AISI 316 Stainless Steel Using EBSD
verfasst von
Wenqian Zhang
Xuelin Wang
Yujin Hu
Siyang Wang
Publikationsdatum
16.01.2018
Verlag
Springer US
Erschienen in
Journal of Materials Engineering and Performance / Ausgabe 2/2018
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-018-3129-9

Weitere Artikel der Ausgabe 2/2018

Journal of Materials Engineering and Performance 2/2018 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.