Skip to main content
main-content

Tipp

Weitere Kapitel dieses Buchs durch Wischen aufrufen

2020 | OriginalPaper | Buchkapitel

Quarter Car Test Rig for Extended Dynamics Research in Laboratory Conditions

verfasst von: Vidas Žuraulis, Artūras Kilikevičius

Erschienen in: Advances in Dynamics of Vehicles on Roads and Tracks

Verlag: Springer International Publishing

share
TEILEN

Abstract

In the research of vehicle dynamics various specialized test rigs are designed for specific elements or systems analysis. Expecting the reliable results all possible uncertainties and side effects should be known in advance. In this paper the analysis of special designed quarter car test rig is presented before its further use in wheel/tire, suspension or its complex research. After explaining the construction, its operation and application an experimental modal analysis and validation of test rig with on-road driving was done in order to find out any uncertainties. Different performance in separate frequency ranges of specific construction locations is identified. This is explained by the influence of unsymmetrical inner frame, suspension side mounting and wheel rotation dynamics. Finally further research possibilities using designed test rig and its options for vehicle components and separate systems including control strategies are presented proving the importance of reliable dynamic tests in laboratory conditions before on-road driving.
Literatur
1.
Zurück zum Zitat Arati, C., Pooja, S., Vinod, B.Y., Pradip, D.U., Londhe, B.C.: A review of design of shock absorber test rig. Int. Res. J. Eng. Technol. 4(3), 2136–2140 (2017) Arati, C., Pooja, S., Vinod, B.Y., Pradip, D.U., Londhe, B.C.: A review of design of shock absorber test rig. Int. Res. J. Eng. Technol. 4(3), 2136–2140 (2017)
2.
Zurück zum Zitat Konieczny, L.: Analysis of simplifications applied in vibration damping modelling for a passive car shock absorber. Shock Vibr. 2016, 1–9 (2016) CrossRef Konieczny, L.: Analysis of simplifications applied in vibration damping modelling for a passive car shock absorber. Shock Vibr. 2016, 1–9 (2016) CrossRef
3.
Zurück zum Zitat Konieczny, L., Burdzik, R., Folega, P., Wieczorek, A.: Determination of the damping characteristics of hydro pneumatic suspension strut. J. Meas. Eng. 1(3), 155–158 (2013) Konieczny, L., Burdzik, R., Folega, P., Wieczorek, A.: Determination of the damping characteristics of hydro pneumatic suspension strut. J. Meas. Eng. 1(3), 155–158 (2013)
4.
Zurück zum Zitat Li, D., Lu, Y., Li, L.: Dynamical test and modeling for hydraulic shock absorber on heavy vehicle under harmonic and random loadings. Res. J. Appl. Sci. Eng. Technol. 4(13), 1903–1910 (2012) Li, D., Lu, Y., Li, L.: Dynamical test and modeling for hydraulic shock absorber on heavy vehicle under harmonic and random loadings. Res. J. Appl. Sci. Eng. Technol. 4(13), 1903–1910 (2012)
5.
Zurück zum Zitat Van der Merwe, N., Schalk, E.P., Žuraulis, V.: ABS braking on rough terrain. J. Terrramech. 80, 49–57 (2018) CrossRef Van der Merwe, N., Schalk, E.P., Žuraulis, V.: ABS braking on rough terrain. J. Terrramech. 80, 49–57 (2018) CrossRef
6.
Zurück zum Zitat Koch, G., Kloiber, T.: Driving state adaptive control of an active vehicle suspension system. IEEE Trans. Control Syst. Technol. 22(1), 1–14 (2013) Koch, G., Kloiber, T.: Driving state adaptive control of an active vehicle suspension system. IEEE Trans. Control Syst. Technol. 22(1), 1–14 (2013)
7.
Zurück zum Zitat Pletschen, N.: Nonlinear H2 control of a low-bandwidth active vehicle suspension system using Takagi-Sugeno methods. In: Proceedings of the 13th International Symposium on Advanced Vehicle Control (AVEC 2016), Munich, Germany, pp. 663–672 (2016) Pletschen, N.: Nonlinear H2 control of a low-bandwidth active vehicle suspension system using Takagi-Sugeno methods. In: Proceedings of the 13th International Symposium on Advanced Vehicle Control (AVEC 2016), Munich, Germany, pp. 663–672 (2016)
8.
Zurück zum Zitat Heidrich, L., Shyrokau, B., Savitski, D., Ivanov, V., Augsburg, K., Wang, D.: Hardware-in-the-loop test rig for integrated vehicle control systems. In: 7th IFAC Symposium on Advances in Automotive Control, pp. 683–688. The International Federation of Automatic Control, Tokyo, Japan (2013) Heidrich, L., Shyrokau, B., Savitski, D., Ivanov, V., Augsburg, K., Wang, D.: Hardware-in-the-loop test rig for integrated vehicle control systems. In: 7th IFAC Symposium on Advances in Automotive Control, pp. 683–688. The International Federation of Automatic Control, Tokyo, Japan (2013)
9.
Zurück zum Zitat Schreiber, V., Savitski, D., Augsburg, K., Ivanov, V., Schyr, Ch.: Advanced braking system control prototyping using networked hardware-in-the-loop technique. In: EuroBrake2016/EB2016-SVM-076, pp. 1–10. The International Federation of Automotive Engineering Societies, TU Automotive 2016, Detroit, Michigan, USA (2016) Schreiber, V., Savitski, D., Augsburg, K., Ivanov, V., Schyr, Ch.: Advanced braking system control prototyping using networked hardware-in-the-loop technique. In: EuroBrake2016/EB2016-SVM-076, pp. 1–10. The International Federation of Automotive Engineering Societies, TU Automotive 2016, Detroit, Michigan, USA (2016)
10.
Zurück zum Zitat Shinde, S.D., Jagdale, J.J., Salunkhe, A.A., Shinde, A.V., Koli, S.R.: Shock absorber test set-up. Int. J. Adv. Eng. Res. Dev. 4(3), 690–698 (2017) Shinde, S.D., Jagdale, J.J., Salunkhe, A.A., Shinde, A.V., Koli, S.R.: Shock absorber test set-up. Int. J. Adv. Eng. Res. Dev. 4(3), 690–698 (2017)
11.
Zurück zum Zitat Kothawade, N.S., Halwar, A.D., Chaudhari, A.I., Mahajan, B.R.: Design of shock absorber test rig for measurement and analysis of transmissibility. Int. J. Eng. Res. Technol. 3(1), 2827–2832 (2014) Kothawade, N.S., Halwar, A.D., Chaudhari, A.I., Mahajan, B.R.: Design of shock absorber test rig for measurement and analysis of transmissibility. Int. J. Eng. Res. Technol. 3(1), 2827–2832 (2014)
12.
Zurück zum Zitat Nandurdikar, A.S., Naik, A.R., Pachpore, S.S., Manurkar, P.A., Nalawade, V.S.: Design of shock absorber test rig using mechanical exciter to determine transmissibility and natural frequency. Int. J. Res. Publ. Eng. Technol. 3(3), 108–111 (2017) Nandurdikar, A.S., Naik, A.R., Pachpore, S.S., Manurkar, P.A., Nalawade, V.S.: Design of shock absorber test rig using mechanical exciter to determine transmissibility and natural frequency. Int. J. Res. Publ. Eng. Technol. 3(3), 108–111 (2017)
13.
Zurück zum Zitat Reynders, E.: System identification methods for (operational) modal analysis: review and comparison. Arch. Comput. Methods Eng. 19(1), 51–124 (2012) MathSciNetCrossRef Reynders, E.: System identification methods for (operational) modal analysis: review and comparison. Arch. Comput. Methods Eng. 19(1), 51–124 (2012) MathSciNetCrossRef
14.
Zurück zum Zitat Žuraulis, V., van der Merwe, N.A., Scholtz, O., Els, P.S.: Modelling and validation of a testing trailer for ABS and tyre interaction on rough terrain. In: 19th International and 14th European-African Regional Conference of the International Society for Terrain-Vehicle Systems (ISTVS), Budapest, Hungary (2017) Žuraulis, V., van der Merwe, N.A., Scholtz, O., Els, P.S.: Modelling and validation of a testing trailer for ABS and tyre interaction on rough terrain. In: 19th International and 14th European-African Regional Conference of the International Society for Terrain-Vehicle Systems (ISTVS), Budapest, Hungary (2017)
Metadaten
Titel
Quarter Car Test Rig for Extended Dynamics Research in Laboratory Conditions
verfasst von
Vidas Žuraulis
Artūras Kilikevičius
Copyright-Jahr
2020
DOI
https://doi.org/10.1007/978-3-030-38077-9_164

Stellenausschreibungen

Anzeige

Premium Partner