nach oben

Erschienen in:

2020 | OriginalPaper | Buchkapitel

Recent Advances in Solar Cells

verfasst von : Marcio A. P. Almeida

Erschienen in: Solar Cells

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The last years the growth of the global population has resulted in high demand for electricity consumption. Photovoltaic devices have shown a big potential to obtain energy power from solar irradiation when compared with other sources. Currently, photovoltaic silicon-based technologies are the most used around the world, but its high cost is still a big problem for global consumption. A short approach to fundamental concepts to inorganic and organic solar cells will be described in this chapter. Moreover, it will be showing new models of solar cells as well as advances and challenges in the development of inorganic and organic solar cells with high efficiency and stability.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Materials for Solar Cell Applications: An Overview of TiO2, ZnO, Upconverting Organic and Polymer-Based Solar Cells

Nächstes Kapitel Photovoltaic Materials Design by Computational Studies: Metal Sulfides

Dudley B (2018) BP Statistical review of world energy 2018. In: Energy economic, Centre for energy economics research and policy. British Petroleum, Available via https://www.bp.com/en/global/corporate/energy-economics/statistical-review-of-world-energy/electricity.html, 5 Jan 2018

Fritts CE (1883) On a new form of selenium photocell. Am J Sci 26:465CrossRef

Chapin DM, Fuller CS, Pearson GL (1954) A new silicon pn junction photocell for converting solar radiation into electrical power. J Appl Phys 25(5):676–677CrossRef

Reynolds DC, Leies G, Antes LL, Marburger RE (1954) Photovoltaic effect in cadmium sulfide. Phys Rev 96(2):533–534CrossRef

Hegedus S, Luque A (2011) Achievements and challenges of solar electricity from photovoltaics. In: Luque A (ed) Handbook of photovoltaic science and engineering, 2nd edn. Wiley, United Kingdom

Kong L, Wang J, Luo T, Meng F, Chen X, Li M, Liu J (2010) Novel pyrenehexafluoroisopropanol derivative-decorated single-walled carbon nanotubes for detection of nerve agents by strong hydrogen-bonding interaction. Analyst 135(2):368–374CrossRef

Nayak PK, Mahesh S, Snaith HJ, Cahen D, (2019) Photovoltaic solar cell technologies: analysing the state of the art. Nat Rev Mater 4(4):269–285CrossRef

(a) Pandey AK, Tyagi VV, Selvaraj JAL, Rahim NA, Tyagi SK (2016) Recent advances in solar photovoltaic systems for emerging trends and advanced applications. Renew Sust Energ Rev 53:859–884; (b) Dubey A, Adhikari N, Mabrouk S, Wu F, Chen K, Yang S, Qiao Q (2018) A strategic review on processing routes towards highly efficient perovskite solar cells. J Mater Chem A6(6):2406–2431; (c) Xu L, Ho C-L, Liu L, Wong W-Y (2018) Molecular/polymeric metallaynes and related molecules: solar cell materials and devices. Coord Chem Rev 373:233–257

Sampaio PGV, González MOA (2017) Photovoltaic solar energy: conceptual framework. Renew Sust Energ Rev 74:590–601CrossRef

10.

(a) Easton RL, Votaw MJ (1959) Vanguard I, Satellite IGY (1958 Beta) Rev Sci Instrum 30:(2) 70–75; (b) Hegedus S, Luque A (2011) Achievements and challenges of solar electricity from photovoltaics. In: Luque A (ed) Handbook of photovoltaic science and engineering, 2^nd. Wiley, Chennai

11.

Jenny DA, Loferski JJ, Rappaport P (1956) Photovoltaic effect in GaAs p-n junctions and solar energy conversion. Phys Rev 101(3):1208–1209CrossRef

12.

Cusano DA (1963) CdTe solar cells and photovoltaic heterojunctions in II–VI compounds. Solid State Electron 6:(3) 217–232CrossRef

13.

(a) Green MA, Emery K, Hishikawa Y, Warta W, Dunlop ED (2015) Solar cell efficiency tables (version 46). Prog Photovolt Res Appl 23(7):805–812; (b) Green MA, Hishikawa Y, Dunlop ED, Levi DH, Hohl-Ebinger J, Yoshita M, Ho-Baillie AWY (2019) Solar cell efficiency tables (Version 53). Prog Photovolt Res Appl 27(1):3–12

14.

He X, Perovskite photovoltaics 2018–2028. https://www.idtechex.com/en/research-report/perovskite-photovoltaics-2018-2028/541. 10 May 2019

15.

(a) Yamaguchi M, Lee KH, Araki K, Kojima N (2018) A review of recent progress in heterogeneous silicon tandem solar cells. J Phys D-Appl Phys 51(133002):13; (b) Miles RW, Zoppi G, Forbes I (2007) Inorganic photovoltaic cells. Mater Today10(11):20–27

16.

Moon S, Kim K, Kim Y, Heo J, Lee J (2016) Highly efficient single-junction GaAs thin-film solar cell on flexible substrate. Sci Rep 6:30107CrossRef

17.

Bauhuis GJ, Mulder P, Schermer JJ, Haverkamp EJ, Deelen JV, Larsen PK (2005) High efficiency thin film GaAs solar cells with improved radiation hardness. In: 20th European photovoltaic solar energy conference, Barcelona, Spain, pp 468–471

18.

Kayes BM, Nie H, Twist R, Spruytte SG, Reinhardt F, Kizilyalli I C, Higashi GS (2011) 27.6% conversion efficiency, a new record for single-junction solar cells under 1 sun illumination. In: Proceedings of the 37th IEEE photovoltaic specialists conference, California, USA

19.

(a) Aghazada S, Nazeeruddin MK (2018) Ruthenium complexes as sensitizers in dye-sensitized solar cells. Inorganics 6(2):52; (b) Qin Y, Peng Q (2012) Ruthenium sensitizers and their applications in dye-sensitized solar cells. Int J Photoenergy (ID 291579); (c) Huang Y, Chen W-C, Zhang X-X, Ghadari R, Fang X-Q, Yu T, Kong F-T (2018) Ruthenium complexes as sensitizers with phenyl-based bipyridine anchoring ligands for efficient dye-sensitized solar cells. J Mater Chem C6(35):9445–9452; (d) Medved’ko AV, Ivanov VK, Kiskin MA et al (2017) The design and synthesis of thiophene-based ruthenium(II) complexes as promising sensitizers for dye-sensitized solar cells. Dyes Pigm 140:169–178; (e) Li C, Liu M, Pschirer NG, Baumgarten M, Müllen K (2010) Polyphenylene-based materials for organic photovoltaics. Chem Rev 110(11):6817–6855

20.

Seok SI, Grätzel M, Park N-G (2018) Methodologies toward highly efficient perovskite solar cells. Small 14(20):1704177CrossRef

21.

Robson KCD, Koivisto BD, Yella A et al (2011) Design and development of functionalized cyclometalated ruthenium chromophores for light-harvesting applications. Inorg Chem 50(12):5494–5508CrossRef

22.

Paek S, Baik C, Kang M-S, Kang H, Ko J (2010) New type of ruthenium sensitizers with a triazole moiety as a bridging group. J Organomet Chem 695(6):821–826CrossRef

23.

(a) You P, Tang G, Yan F (2019) Two-dimensional materials in perovskite solar cells. Mater Today Energy 11:128–158; (b) Nakazaki J, Segawa H (2018) Evolution of organometal halide solar cells. J Photoch Photobio C35:74–107; (c) Konstantakou M, Stergiopoulos T (2017) A critical review on tin halide perovskite solar cells. J Mater Chem A5(23):11518–11549; (d) Giustino F, Snaith H J (2016) Toward lead-free perovskite solar cells. ACS Energy Lett 1(6):1233–1240; (e) Editorial (2019) A decade of perovskite photovoltaics. Nat Energy 4(1):1–1; (f) Meng L, Wei Q, Yang Z et al (2020) Improved perovskite solar cell efficiency by tuning the colloidal size and free ion concentration in precursor solution using formic acid additive. J. Energy Chem 41:43–51

24.

Green MA, Ho-Baillie A (2017) Perovskite solar cells: the birth of a new era in photovoltaics. ACS Energy Lett 2(4):822–830CrossRef

25.

Li D, Meng Q (2019) Interfacial engineering to improve the stability of perovskite solar cells. In: International conference on perovskite photonics and optoelectronics, Israel

26.

(a) Li Y, Ji L, Liu R et al (2018) A review on morphology engineering for highly efficient and stable hybrid perovskite solar cells. J. Mater. Chem. A6:(27) 12842–12875; (b) Jamal MS, Bashar MS, Hasan AKM et al (2018) Fabrication techniques and morphological analysis of perovskite absorber layer for high-efficiency perovskite solar cell: a review. Renew Sustain Energy Rev 98:469–488

27.

Deepa M, Salado M, Calio L, Kazim S, Shivaprasad SM, Ahmad S (2017) Cesium power: low Cs⁺ levels impart stability to perovskite solar cells. Phys Chem Chem Phys 19(5):4069–4077CrossRef

28.

Cho KT, Paek S, Grancini G, Roldán-Carmona C, Gao P, Lee Y, Nazeeruddin MK (2017) Highly efficient perovskite solar cells with a compositionally engineered perovskite/hole transporting material interface. Energy Environ Sci 10(2):621–627CrossRef

29.

Wang Z, McMeekin DP, Sakai N et al (2017) Efficient and air-stable mixed-cation lead mixed-halide perovskite solar cells with n-doped organic electron extraction layers. Adv Mater 29(5):1604186CrossRef

30.

Wang JT-W, Wang Z, Pathak S et al (2016) Efficient perovskite solar cells by metal ion doping. Energy Environ Sci 9(9):2892–2901CrossRef

31.

Yang S, Fu W, Zhang Z, Chen H, Li C-Z (2017) Recent advances in perovskite solar cells: efficiency, stability and lead-free perovskite. J Mater Chem A5(23):11462–11482CrossRef

32.

Zhang Y, Grancini G, Feng Y, Asiri AM, Nazeeruddin MK (2017) Optimization of stable quasi-cubic FA_xMA_1−xPbI₃ perovskite structure for solar cells with efficiency beyond 20%. ACS Energy Lett. 2(4):802–806CrossRef

33.

Jodlowski AD, Roldán-Carmona C, Grancini G et al (2017) Large guanidinium cation mixed with methylammonium in lead iodide perovskites for 19% efficient solar cells. Nature Energy 2(12):972–979

34.

(a) Chu Z, Yang M, Schulz P et al (2017) Impact of grain boundaries on efficiency and stability of organic-inorganic trihalide perovskites. Nat Commun 8(1):2230; (b) Yun JS, Ho-Baillie A, Huang S et al (2015) Benefit of grain boundaries in organic–inorganic halide planar perovskite solar cells. J Phys Chem Lett 6(5):875–880

35.

Wang L-Y, Deng L-L, Wang X et al (2017) Di-isopropyl ether assisted crystallization of organic–inorganic perovskites for efficient and reproducible perovskite solar cells. Nanoscale 9(45):17893–17901CrossRef

36.

(a) Chen P, Wang Y, Wang M, Zhang X, Wang L, Liu Y (2015) TiO₂ nanoparticle-based electron transport layer with improved wettability for efficient planar-heterojunction perovskite solar cell. J Energy Chem 24(6):717–721; (b) Mori S, Yanagida S (2007) TiO₂-based dye-sensitized solar cell. In: Soga T (ed) Nanostructured materials for solar energy conversion. Elsevier Science; (c) Mohamad Noh MF, Teh CH, Daik R et al (2018) The architecture of the electron transport layer for a perovskite solar cell. J Mater Chem C6(4):682–712

37.

Urieta-Mora J, García-Benito I, Molina-Ontoria A, Martín N (2018) Hole transporting materials for perovskite solar cells: a chemical approach. Chem Soc Rev 47(23):8541–8571CrossRef

38.

Sulaeman U, Zuhairi Abdullah A (2017) The way forward for the modification of dye-sensitized solar cell towards better power conversion efficiency. Renew Sust Energ Rev 74:438–452CrossRef

39.

(a) Li Y, Zhu J, Huang Y et al (2015) Mesoporous SnO₂ nanoparticle films as electron-transporting material in perovskite solar cells. RSC Adv 5(36):28424–28429; (b) Chen Y, Meng Q, Zhang L, Han C, Gao H, Zhang Y,Yan H, (2019) SnO₂-based electron transporting layer materials for perovskite solar cells: A review of recent progress. J Energy Chem 35:144–167; (c) Xiong L, Guo Y, Wen J, Liu H, Yang G, Qin P, Fang G (2018) Review on the application of SnO₂ in perovskite solar cells. Adv Funct Mater 28(35):1802757

40.

Mahmood K, Swain BS, Kirmani AR, Amassian A (2015) Highly efficient perovskite solar cells based on a nanostructured WO₃–TiO₂ core–shell electron transporting material. J Mater Chem A3(17):9051–9057CrossRef

41.

(a) Anwar F, Mahbub R, Satter SS, Ullah S M (2017) Effect of different HTM layers and electrical parameters on ZnO nanorod-based lead-free perovskite solar cell for high-efficiency performance. Int J Photoenergy (ID 9846310) 9; (b) Zhang P, Wu J, Zhang T et al (2018) Perovskite solar cells with ZnO electron-transporting materials. Adv Mater 30(3):1703737; (c) Rong P, Ren S, Yu Q (2019) Fabrications and applications of ZnO nanomaterials in flexible functional devices-a review. Crit Rev Anal Chem 49(4):336–349; (d) Luo J, Wang Y, Zhang Q (2018) Progress in perovskite solar cells based on ZnO nanostructures. Sol Energy 163:289–306

42.

Son D-Y, Im J-H, Kim H-S, Park N-G (2014) 11% efficient perovskite solar cell based on ZnO nanorods: an effective charge collection system. J Phys Chem C 118(30):16567–16573CrossRef

43.

Xu X, Zhang H, Shi J, Dong J, Luo Y, Li D, Meng Q (2015) Highly efficient planar perovskite solar cells with a TiO₂/ZnO electron transport bilayer. J Mater Chem A3(38):19288–19293CrossRef

44.

Li S, Zhang P, Chen H et al (2017) Mesoporous PbI2 assisted growth of large perovskite grains for efficient perovskite solar cells based on ZnO nanorods. J Power Sources 342:990–997CrossRef

45.

Chang C-Y, Lee K-T, Huang W-K, Siao H-Y, Chang Y-C (2015) High-performance, air-stable, low-temperature processed semitransparent perovskite solar cells enabled by atomic layer deposition. Chem Mater 27(14):5122–5130CrossRef

46.

Correa Baena JP, Steier L, Tress W et al (2015) Highly efficient planar perovskite solar cells through band alignment engineering. Energy Environ Sci 8(10):2928–2934CrossRef

47.

Song S, Kang G, Pyeon L, Lim C, Lee G-Y, Park T,Choi J, (2017) Systematically optimized bilayered electron transport layer for highly efficient planar perovskite solar cells (η = 21.1%). ACS Energy Lett 2(12):2667–2673

48.

Jiang Q, Chu Z, Wang P et al (2017) Planar-structure perovskite solar cells with efficiency beyond 21%. Adv Mater 29(46):1703852CrossRef

49.

Xie J, Huang K, Yu X et al, (2017) Enhanced electronic properties of SnO₂ via electron transfer from graphene quantum dots for efficient perovskite solar cells. ACS Nano 11(9):9176–9182CrossRef

50.

Anaraki EH, Kermanpur A, Steier L et al (2016) Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide. Energy Environ Sci 9(10):3128–3134CrossRef

51.

Bach U, Lupo D, Comte P et al (1998) Solid-state dye-sensitized mesoporous TiO₂ solar cells with high photon-to-electron conversion efficiencies. Nature 395(6702):583–585CrossRef

52.

Calió L, Kazim S, Grätzel M, Ahmad S (2016) Hole-transport materials for perovskite solar cells. Angew Chem Int Ed 55(47):14522–14545CrossRef

53.

(a) Nguyen WH, Bailie CD, Unger EL, McGehee MD (2014) Enhancing the hole-conductivity of spiro-OMeTAD without oxygen or lithium salts by using spiro(TFSI)₂ in perovskite and dye-sensitized solar cells. J Am Chem Soc 136(31):10996–11001; (b) Li M-H, Yum J-H, Moon S-J, Chen P (2016) Inorganic p-type semiconductors: their applications and progress in dye-sensitized solar cells and perovskite solar cells. Energies 9(5):331

54.

(a) Chen Y, Yang Z, Wang S et al (2018) Design of an inorganic mesoporous hole-transporting layer for highly efficient and stable inverted perovskite solar cells. Adv Mater 30(52):1805660; (b) Kung P-K, Li M-H, Lin P-Y, Chiang Y-H, Chan C-R, Guo T-F, Chen P (2018) A review of inorganic hole transport materials for perovskite solar cells. Adv Mater Interfaces 5(22):1800882; (c) Singh R, Singh PK, Bhattacharya B, Rhee H-W (2019) Review of current progress in inorganic hole-transport materials for perovskite solar cells. Appl Mater Today 14:175–200

55.

Chen J, Park N-G (2018) Inorganic hole transporting materials for stable and high efficiency perovskite solar cells. J Phys Chem C 122(25):14039–14063CrossRef

56.

Saliba M, Orlandi S, Matsui T et al (2016) A molecularly engineered hole-transporting material for efficient perovskite solar cells. Nature Energy 1:15017CrossRef

57.

Xu B, Zhang J, Hua Y et al (2017) Tailor-making low-cost spiro[fluorene-9,9′-xanthene]-based 3D oligomers for perovskite solar cells. Chem 2(5):676–687CrossRef

58.

Wang L, Zhang J, Liu P et al (2018) Design and synthesis of dopant-free organic hole-transport materials for perovskite solar cells. Chem Commun 54(69):9571–9574CrossRef

59.

Bi D, Xu B, Gao P, Sun L, Grätzel M, Hagfeldt A (2016) Facile synthesized organic hole transporting material for perovskite solar cell with efficiency of 19.8%. Nano Energy 23:138–144CrossRef

60.

(a) Yu Z, Sun L (2018) Inorganic hole-transporting materials for perovskite solar cells. Small Methods 2(2):1700280; (b) Rajeswari R, Mrinalini M, Prasanthkumar S, Giribabu L (2017) Emerging of inorganic hole transporting materials for perovskite solar cells. Chem Rec 17(7):681–699; (c) Wang Q, Li H, Zhuang J et al (2019) Hole transport materials doped to absorber film for improving the performance of the perovskite solar cells. Mater Sci Semicond Proc 98:113–120

61.

Rao H, Ye S, Sun W et al (2016) A 19.0% efficiency achieved in CuO_x-based inverted CH₃NH₃PbI_3−xCl_x solar cells by an effective Cl doping method. Nano Energy 27:51–57CrossRef

62.

Zhang H, Wang H, Chen W, Jen AK-Y (2017) CuGaO₂: a promising inorganic hole-transporting material for highly efficient and stable perovskite solar cells. Adv Mater 29(8):1604984CrossRef

63.

Liu C, Zhou X, Chen S, Zhao X, Dai S, Xu B (2019) Hydrophobic Cu₂O quantum dots enabled by surfactant modification as top hole-transport materials for efficient perovskite solar cells. Adv Sci 6(7):1801169CrossRef

64.

Chen Y, Yang Z, Jia X et al (2019) Thermally stable methylammonium-free inverted perovskite solar cells with Zn²⁺ doped CuGaO₂ as efficient mesoporous hole-transporting layer. Nano Energy 61:148–157CrossRef

65.

Joselevich E (2004) Electronic structure and chemical reactivity of carbon nanotubes: a chemist’s view. ChemPhysChem 5(5):619–624CrossRef

66.

Wang H, Yuan Y, Wei L, Goh K, Yu D, Chen Y (2015) Catalysts for chirality selective synthesis of single-walled carbon nanotubes. Carbon 81:1–19CrossRef

67.

Wu H-C, Chang X, Liu L, Zhao F, Zhao Y (2010) Chemistry of carbon nanotubes in biomedical applications. J Mater Chem 20(6):1036–1052CrossRef

68.

Jain RM, Howden R, Tvrdy K et al (2012) Polymer-free near-infrared photovoltaics with single chirality (6,5) semiconducting carbon nanotube active layers. Adv Mater 24(32):4436–4439CrossRef

69.

(a) Vavro J, Llaguno MC, Fischer JE et al (2003) Thermoelectric power of p-doped single-wall carbon nanotubes and the role of phonon drag. Phys Rev Lett 90(6):065503; (b) Collins PG, Bradley K, Ishigami M, Zettl A (2000) Extreme oxygen sensitivity of electronic properties of carbon nanotubes. Science 287(5459):1801–1804; (c) Nonoguchi Y, Ohashi K, Kanazawa R et al (2013) Systematic conversion of single walled carbon nanotubes into n-type thermoelectric materials by molecular dopants. Sci Rep 3:3344

70.

Kim SM, Jang JH, Kim KK et al (2009) Reduction-controlled viologen in bisolvent as an environmentally stable n-type dopant for carbon nanotubes. J Am Chem Soc 131(1):327–331CrossRef

71.

(a) Chatterjee S, Pal AJ (2018) Influence of metal substitution on hybrid halide perovskites: towards lead-free perovskite solar cells. J Mater Chem A6(9):3793–3823; (b) Wang H, Kim DH (2017) Perovskite-based photodetectors: materials and devices. Chem Soc Rev 46(17):5204–5236; (c) Hong K, Le QV, Kim SY, Jang HW (2018) Low-dimensional halide perovskites: review and issues. J Mater Chem C6(9):2189–2209

72.

(a) Green MA, Bein T (2015) Perovskite cells charge forward. Nat Mater 14:559–561; (b) Fu Q, Tang X, Huang B, Hu T, Tan L, Chen L, Chen Y, (2018) Recent progress on the long-term stability of perovskite solar cells. Adv Sci 5(5):1700387

73.

Wang D, Wright M, Elumalai NK, Uddin A (2016) Stability of perovskite solar cells. Sol Energy Mat Sol Cells 147:255–275CrossRef

74.

Tsai C-M, Shiu H-S, Wu H-P, Diau EW-G (2017) Control of film morphology for high-performance perovskite solar cells. In: DiauandP EW-G, Chen C-Y (eds) Perovskite solar cells principle, materials and devices. World Scientific Publishing Co., New Jersey

75.

(a) Snaith HJ, Abate A, Ball JM et al (2014) Anomalous hysteresis in perovskite solar cells. J Phys Chem Lett 5:(9) 1511–1515; (b) Bergmann V W, Weber S A L, Javier Ramos F et al (2014) Real-space observation of unbalanced charge distribution inside a perovskite-sensitized solar cell. Nat Commun 5:5001; (c) Chen B, Yang M, Priya S, Zhu K (2016) Origin of J–V hysteresis in perovskite solar cells. J Phys Chem Lett 7(5):905–917

76.

(a) Ihly R, Dowgiallo A-M, Yang M et al (2016) Efficient charge extraction and slow recombination in organic–inorganic perovskites capped with semiconducting single-walled carbon nanotubes. Energy Environ Sci 9(4):1439–1449; (b) Blackburn JL (2017) Semiconducting single-walled carbon nanotubes in solar energy harvesting. ACS Energy Lett 2(7):1598–1613

77.

(a) Tiong VT, Pham ND, Wang T et al (2018) Octadecylamine-functionalized single-walled carbon nanotubes for facilitating the formation of a monolithic perovskite layer and stable solar cells. Adv Funct Mater 28(10):1705545; (b) Ryu J, Lee K, Yun J, Yu H, Lee J, Jang J (2017) Paintable carbon-based perovskite solar cells with engineered perovskite/carbon interface using carbon nanotubes dripping method. Small 13(38):1701225; (c) Aitola K, Domanski K, Correa-Baena J-P et al (2017) High temperature-stable perovskite solar cell based on low-cost carbon nanotube hole contact. Adv Mater 29(17):1606398; (d) Ahn N, Jeon I, Yoon J, Kauppinen EI, Matsuo Y, Maruyama S, Choi M (2018) Carbon-sandwiched perovskite solar cell. J Mater Chem A6(4):1382–1389

78.

Zhang Y, Tan L, Fu Q, Chen L, Ji T, Hu X, Chen Y (2016) Enhancing the grain size of organic halide perovskites by sulfonate-carbon nanotube incorporation in high performance perovskite solar cells. Chem Commun 52(33):5674–5677CrossRef

79.

(a) Park C, Ko H, Sin DH, Song KC, Cho K (2017) Organometal halide perovskite solar cells with improved thermal stability via grain boundary passivation using a molecular additive. Adv Funct Mater 27(42):1703546; (b) Lee J-W, Bae S-H, De Marco N, Hsieh Y-T, Dai Z, Yang Y (2018) The role of grain boundaries in perovskite solar cells. Materials Today Energy 7:149–160

80.

(a) Ham S, Choi Y J, Lee J-W, Park N-G, Kim D (2017) Impact of excess CH₃NH₃I on free carrier dynamics in high-performance nonstoichiometric perovskites. J Phys Chem C121(5):3143–3148; (b) Yang M, Zeng Y, Li Z, Kim DH, Jiang C-S, van de Lagemaat J, Zhu K (2017) Do grain boundaries dominate non-radiative recombination in CH₃NH₃PbI₃ perovskite thin films? Phys Chem Chem Phys 19(7):5043–5050

81.

Gu Z, Huang Z, Li C, Li M, Song Y (2018) A general printing approach for scalable growth of perovskite single-crystal films. Sci Adv 4(6):eaat2390CrossRef

82.

Wang Y, Zhao H, Mei Y, Liu H, Wang S, Li X (2019) Carbon nanotube bridging method for hole transport layer-free paintable carbon-based perovskite solar cells. ACS Appl Mater Interfaces 11(1):916–923CrossRef

83.

Kojima A, Teshima K, Shirai Y, Miyasaka T (2009) Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J Am Chem Soc 131(17):6050–6051CrossRef

84.

(a) Qin K, Dong B, Wang S (2019) Improving the stability of metal halide perovskite solar cells from material to structure. J Energy Chem 33:90–99; (b) Byranvand MM, Kharat AN, Taghavinia N (2019) Moisture stability in nanostructured perovskite solar cells. Mater Lett 237:356–360

85.

Frost JM, Butler KT, Brivio F, Hendon CH, van Schilfgaarde M, Walsh A (2014) Atomistic origins of high-performance in hybrid halide perovskite solar cells. Nano Lett 14(5):2584–2590CrossRef

86.

You J, Meng L, Song T-B et al (2015) Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers. Nat Nanotechnol 11:75CrossRef

87.

(a) Guo Y, Kang L, Zhu M, Zhang Y, Li X, Xu P (2018) A strategy toward air-stable and high-performance ZnO-based perovskite solar cells fabricated under ambient conditions. Chem Eng J 336:732–740; (b) Song J, Liu L, Wang X-F, Chen G, Tian W, Miyasaka T (2017) Highly efficient and stable low-temperature processed ZnO solar cells with triple cation perovskite absorber. J Mater Chem A5(26):13439–13447

88.

Zhang W, Ren Z, Guo Y, He X, Li X (2018) Improved the long-term air stability of ZnO-based perovskite solar cells prepared under ambient conditions via surface modification of the electron transport layer using an ionic liquid. Electrochim Acta 268:539–545CrossRef

89.

Choi EY, Kim J, Lim S, Han E, Ho-Baillie AWY, Park N (2018) Enhancing stability for organic-inorganic perovskite solar cells by atomic layer deposited Al₂O₃ encapsulation. Sol Energy Mat Sol Cells 188:37–45CrossRef

90.

Wu S, Chen R, Zhang S et al (2019) A chemically inert bismuth interlayer enhances long-term stability of inverted perovskite solar cells. Nat Commun 10(1):1161

91.

(a) Siegler TD, Houck DW, Cho SH, Milliron DJ, Korgel BA (2019) Bismuth Enhances the Stability of CH₃NH₃PbI₃ (MAPI) perovskite under high humidity. J Phys Chem C123(1):963–970; (b) Chan S-H, Wu M-C, Lee K-M, Chen W-C, Lin T-H, Su W-F (2017) Enhancing perovskite solar cell performance and stability by doping barium in methylammonium lead halide. J Mater Chem A5(34):18044–18052; (c) Niu G, Li W, Li J, Liang X, Wang L (2017) Enhancement of thermal stability for perovskite solar cells through cesium doping. RSC Adv 7(28):17473–17479; (d) Zhang X, Ren X, Liu B et al (2017) Stable high efficiency two-dimensional perovskite solar cells via cesium doping. Energy Environ Sci 10(10):2095–2102

92.

Saliba M, Matsui T, Seo J-Y et al (2016) Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency. Energy Environ Sci 9(6):1989–1997CrossRef

93.

Yang S, Wang Y, Liu P, Cheng Y-B, Zhao HJ, Yang HG (2016) Functionalization of perovskite thin films with moisture-tolerant molecules. Nat Energy 1:15016CrossRef

94.

Meng L, Zhang F, Ma W et al (2019) Improving photovoltaic stability and performance of perovskite solar cells by molecular interface engineering. J Phys Chem B 123(2):1219–1225

95.

(a) Wei D, Huang H, Cui P et al (2019) Moisture-tolerant supermolecule for the stability enhancement of organic–inorganic perovskite solar cells in ambient air. Nanoscale 11(3):1228–1235; (b) Quan LN, Yuan M, Comin R et al (2016) Ligand-stabilized reduced-dimensionality perovskites. J Am Chem Soc 138(8):2649–2655

96.

Tang CW (1986) Two-layer organic photovoltaic cell. Appl Phys Lett 48(2):183–185CrossRef

97.

(a) Zhang S, Qin Y, Zhu J, Hou J (2018) Over 14% efficiency in polymer solar cells enabled by a chlorinated polymer donor. Adv Mater 30(20):1800868; (b) Xue R, Zhang J, Li Y, Li Y (2018) Organic solar cell materials toward commercialization. Small 14(41):1801793; (c) Lu L, Zheng T, Wu Q, Schneider AM, Zhao D, Yu L (2015) Recent advances in bulk heterojunction polymer solar cells. Chem Rev 115(23):12666–12731

98.

Speller EM (2017) The significance of fullerene electron acceptors in organic solar cell photo-oxidation. Mater Sci Tech 33(8):924–933CrossRef

99.

Glatthaar M, Niggemann M, Zimmermann B, Lewer P, Riede M, Hinsch A, Luther J (2005) Organic solar cells using inverted layer sequence. Thin Solid Films 491(1):298–300CrossRef

100.

Rafique S, Abdullah SM, Sulaiman K, Iwamoto M (2018) Fundamentals of bulk heterojunction organic solar cells: an overview of stability/degradation issues and strategies for improvement. Renew Sust Energy Rev 84:43–53CrossRef

101.

Gaspar H, Figueira F, Pereira L, Mendes A, Viana J C,Bernardo G (2018) Recent developments in the optimization of the bulk heterojunction morphology of polymer: fullerene solar cells. Materials 11(12):2560CrossRef

102.

Nelson J (2011) Polymer: fullerene bulk heterojunction solar cells. Mater Today 14(10):462–470CrossRef

103.

(a) Liao H-C, Ho C-C, Chang C-Y, Jao M-H, Darling SB, Su W-F (2013) Additives for morphology control in high-efficiency organic solar cells. Mater. Today 16(9):326–336; (b) Berger PR, Kim M (2018) Polymer solar cells: P3HT:PCBM and beyond. J Renew Sustain Enerey 10(1):013508; (c) Laird DW, Vaidya S, Li S et al (2007) Advances in plexcore active layer technology systems for organic photovoltaics: roof-top and accelerated lifetime analysis of high performance organic photovoltaic cells. In: Organic Photovoltaics VIII, vol 6656. SPIE, p. 66560X

104.

Tamilavan V, Song M, Jin S-H, Hyun MH (2013) Synthesis of new broad absorption low band gap random copolymers for bulk heterojunction solar cell applications. Macromol Res 21(4):406–413CrossRef

105.

Mikroyannidis JA, Tsagkournos DV, Sharma SS, Vijay YK, Sharma GD (2010) Conjugated small molecules with broad absorption containing pyridine and pyran units: synthesis and application for bulk heterojunction solar cells. Org Electron 11(12):2045–2054CrossRef

106.

(a) Pratyusha T, Sivakumar G, Yella A, Gupta D, (2017) Novel ternary blend of PCDTBT, PCPDTBT and PC70BM for the fabrication of bulk heterojunction organic solar cells. Mater Today Proc 4(4, Part B):5067–5073; (b) Boland P, Lee K, Namkoong G (2010) Device optimization in PCPDTBT:PCBM plastic solar cells. Sol Energy Mat Sol C 94(5):915–920

107.

Alem S, Chu T-Y, Tse SC et al (2011) Effect of mixed solvents on PCDTBT:PC70BM based solar cells. Org Electron 12(11):1788–1793CrossRef

108.

Nagarjuna P, Bagui A, Gupta V, Singh SP (2017) A highly efficient PTB7-Th polymer donor bulk hetero-junction solar cell with increased open circuit voltage using fullerene acceptor CN-PC70BM. Org Electron 43:262–267CrossRef

109.

Collado-Fregoso E, Deledalle F, Utzat H et al (2017) Photophysical study of DPPTT-T/PC70BM blends and solar devices as a function of fullerene loading: an Insight into EQE limitations of DPP-based polymers. Adv Func Mater 27(6):1604426CrossRef

110.

(a) Bin H, Zhang Z-G, Gao L et al (2016) Non-fullerene polymer solar cells based on alkylthio and fluorine substituted 2D-conjugated polymers reach 9.5% efficiency. J Am Chem Soc 138(13):4657–4664; (b) Bin H, Gao L, Zhang Z-G et al (2016) 11.4% efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor. Nat Commun 7:13651

111.

Xu X, Bi Z, Ma W et al (2017) Highly efficient ternary-blend polymer solar cells enabled by a nonfullerene acceptor and two polymer donors with a broad composition tolerance. Adv Mater 29(46):1704271CrossRef

112.

Fei Z, Eisner FD, Jiao X et al (2018) An alkylated Indacenodithieno[3,2-b]thiophene-based nonfullerene acceptor with high crystallinity exhibiting single junction solar cell efficiencies greater than 13% with low voltage losses. Adv Mater 30(8):1705209CrossRef

113.

(a) Zhang Z, Yuan J, Wei Q, Zou Y (2018) Small-molecule electron acceptors for efficient non-fullerene organic solar cells. Front Chem 6:414–414; (b) Liang N, Sun K, Feng J et al (2018) Near-infrared electron acceptors based on terrylene diimides for organic solar cells. J Mater Chem A6(39):18808–18812; (c) Wang J, Zhan X (2019) Rylene diimide electron acceptors for organic solar cells. Trends Chem. https://doi.org/10.1016/j.trechm.2019.1005.1002; (d) Li S, Zhang Z, Shi M, Li C-Z, Chen H (2017) Molecular electron acceptors for efficient fullerene-free organic solar cells. Phys Chem Chem Phys 19(5):3440–3458

114.

(a) Sauvé G, Fernando R (2015) Beyond fullerenes: designing alternative molecular electron acceptors for solution-processable bulk Heterojunction organic photovoltaics. J Phys Chem Lett 6(18):3770–3780; (b) Zhan C, Yao J, (2016) More than conformational “twisting” or “coplanarity”: molecular strategies for designing high-efficiency nonfullerene organic solar cells. Chem Mater 28(7):1948–1964; (c) Li S, Ye L, Zhao W, Zhang S, Mukherjee S, Ade H, Hou J (2016) Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells. Adv Mater 28(42):9423–9429

115.

(a) Gao L, Zhang Z-G, Xue L, Min J, Zhang J, Wei Z, Li Y (2016) All-polymer solar cells based on absorption-complementary polymer donor and acceptor with high power conversion efficiency of 8.27%. Adv Mater 28(9):1884–1890; (b) Zhao R, Dou C, Xie Z, Liu J, Wang L (2016) Polymer acceptor based on B ← N units with enhanced electron mobility for efficient all-polymer solar cells. Angew Chem Int Ed 55(17):5313–5317

116.

(a) Ganesamoorthy R, Sathiyan G, Sakthivel P (2017) Review: fullerene based acceptors for efficient bulk heterojunction organic solar cell applications. Sol Energ Mat Sol C 161:102–148; (b) Cui Y, Yao H, Zhang J et al (2019) Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages. Nat Commun 10(1):2515

117.

Kim M, Lee J, Sin D H, Lee H, Woo H Y,Cho K, (2018) Nonfullerene/fullerene acceptor blend with a tunable energy state for high-performance ternary organic solar cells. ACS Appl. Mater. Interfaces 10(30):25570–25579CrossRef

118.

Zhao J, Li Y, Yang G et al (2016) Efficient organic solar cells processed from hydrocarbon solvents. Nature Energy 1:15027CrossRef

119.

(a) Zhao W, Qian D, Zhang S, Li S, Inganäs O, Gao F, Hou J (2016) Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability. Adv Mater 28(23):4734–4739; (b) Li S, Ye L, Zhao W et al (2018) A wide band gap polymer with a deep highest occupied molecular orbital level enables 14.2% efficiency in polymer solar cells. J Am Chem Soc 140(23):7159–7167

120.

(a) Wadsworth A, Moser M, Marks A et al (2019) Critical review of the molecular design progress in non-fullerene electron acceptors towards commercially viable organic solar cells. Chem Soc Rev 48(6):1596–1625; (b) Pan Q-Q, Li S-B, Wu Y, Geng Y, Zhang M, Su Z-M (2018) Exploring more effective polymer donors for the famous non-fullerene acceptor ITIC in organic solar cells by increasing electron-withdrawing ability. Org Electron 53:308–314; (c) Cui C (2018) Recent progress in fused-ring based nonfullerene acceptors for polymer solar cells. Front Chem 6:404

121.

Yang K, Liao Q, Koh CW et al (2019) Improved photovoltaic performance of a nonfullerene acceptor based on a benzo[b]thiophene fused end group with extended π-conjugation. J Mater Chem A7(16):9822–9830CrossRef

122.

Zhao W, Li S, Yao H, Zhang S, Zhang Y, Yang B, Hou J (2017) Molecular optimization enables over 13% efficiency in organic solar cells. J Am Chem Soc 139(21):7148–7151CrossRef

123.

Ameri T, Dennler G, Lungenschmied C, Brabec CJ (2009) Organic tandem solar cells: a review. Energy Environ Sci 2(4):347–363CrossRef

124.

Shockley W, Queisser HJ (1961) Detailed balance limit of efficiency of p-n junction solar cells. J Appl Phys 32(3):510–519CrossRef

125.

Vos AD (1980) Detailed balance limit of the efficiency of tandem solar cells. J Phys D Appl Phys 13(5):839–846CrossRef

126.

PVeducation, Reference solar spectral irradiance: ASTM G-173. 11/07/2019. https://www.pveducation.org/pvcdrom/appendices/standard-solar-spectra

127.

Xue J, Uchida S, Rand BP, Forrest SR (2004) Asymmetric tandem organic photovoltaic cells with hybrid planar-mixed molecular heterojunctions. Appl Phys Lett 85(23):5757–5759CrossRef

128.

Gilot J, Janssen RAJ (2014) Tandem and multijunction organic solar cells. In: Randand BP, Richter H (eds) Organic solar cells: fundamentals, devices, and upscaling, Pan Stanford, FloridaCrossRef

129.

Jošt M, Köhnen E, Morales-Vilches AB et al (2018) Textured interfaces in monolithic perovskite/silicon tandem solar cells: advanced light management for improved efficiency and energy yield. Energy Environ Sci 11(12):3511–3523CrossRef

130.

Jeon NJ, Na H, Jung EH et al (2018) A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells. Nat Energy 3(8):682–689CrossRef

131.

Werner J, Weng C-H, Walter A et al (2016) Efficient monolithic perovskite/silicon tandem solar cell with cell area > 1 cm². J Phys Chem Lett 7(1):161–166CrossRef

132.

Bush KA, Palmstrom AF, Yu ZJ et al (2017) 23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability. Nat Energy 2:17009

133.

Meng L, Zhang Y, Wan X et al (2018) Organic and solution-processed tandem solar cells with 17.3% efficiency. Science 361(6407):1094–1098

134.

Cariou R, Benick J, Beutel P et al (2017) Monolithic two-terminal III–V//Si triple-junction solar cells with 30.2% efficiency under 1-sun AM1.5g. IEEE J Photovolt 7(1):367–373

135.

Essig S, Allebé C, Remo T et al (2017) Raising the one-sun conversion efficiency of III–V/Si solar cells to 32.8% for two junctions and 35.9% for three junctions. Nat Energy 2:17144

Titel: Recent Advances in Solar Cells
verfasst von: Marcio A. P. Almeida
Verlag: Springer International Publishing
Buch: Solar Cells
Print ISBN: 978-3-030-36353-6

Electronic ISBN: 978-3-030-36354-3

Copyright-Jahr: 2020
DOI: https://doi.org/10.1007/978-3-030-36354-3_4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht