nach oben

Erschienen in:

2022 | OriginalPaper | Buchkapitel

Reducing Working Fluid Pulsations in Planetary Hydraulic Machines by Rational Design of the Distribution Systems

verfasst von : Oksana Yeremenko, Mamadamon A. Abdullo, Nataliia Boltianska, Stepan Mikhalchenko, Valentyna Verkholantseva

Erschienen in: Advances in Design, Simulation and Manufacturing V

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The work studied the influence of changing the throughput of distribution systems on the output characteristics of planetary hydraulic machines to ensure their stabilization at the design stages. A design scheme a mathematical apparatus have been developed, and the initial data have been substantiated, which make it possible to study the effect of changing the geometric parameters of the distribution system on the pulsation of its flow area. The pulsation coefficients of the distribution system throughput and the rotational speed of the hydraulic motor shaft, the pressure of the working fluid, and the torque on the hydraulic motor shaft have been investigated. The starting conditions for the design of distribution systems are substantiated, which exclude pulsations of the working fluid in planetary hydraulic machines for kinematic schemes 5/4, 7/6, 9/8, 11/10, and 13/12. The angular gap between the distribution windows was taken as 0°, 0°25′30″, and 0°51″. The number of additional unloading windows in the distribution system was taken as 0, 2, 3, and 4.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel The Effect of Manufacturing Tolerances on the Hydrodynamic Characteristics of Plain Bearings

Nächstes Kapitel Design and Modernization of Circuit for Fuel Oil Heating and Tar Cooling

Gamez-Montero, P., Codina, E., Castilla, R.: A review of Gerotor technology in hydraulic machines. Energies 12, 2423 (2019). https://doi.org/10.3390/en12122423CrossRef

Panchenko, A., Voloshina, A., Milaeva, I., Luzan, P.: Operating conditions’ influence on the change of functional characteristics for mechatronic systems with orbital hydraulic motors. In: Nadykto, V. (ed.) Modern Development Paths of Agricultural Production, pp. 169–176. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-14918-5_18CrossRef

Panchenko, A., Voloshina, A., Boltyansky, O., et al.: Designing the flow-through parts of distribution systems for the PRG series planetary hydraulic motors. East. Eur. J. Enterpr. Technol. 3(193), 67–77 (2018). https://doi.org/10.15587/1729-4061.2018.132504

Voloshina, A., Panchenko, A., Boltyansky, O., Panchenko, I., Titova, O.: Justification of the kinematic diagrams for the distribution system of a planetary hydraulic motor. Int. J. Eng. Technol. 7(4.3), 6–11 (2018). https://doi.org/10.14419/ijet.v7i4.3.19544

Panchenko, A., Voloshina, A., Kiurchev, S., et al.: Development of the universal model of mechatronic system with a hydraulic drive. East. Eur. J. Enterpr. Technol. 4(794), 51–60 (2018). https://doi.org/10.15587/1729-4061.2018.139577

Makarov, V., Rezvaya, K., Drankovskiy, V., Mikhaylo, C.: Determination of the main parameters of the pump-turbine using the block-hierarchical approach. Week Adv. Technol. 536–540 (2020). https://doi.org/10.1109/KhPIWeek51551.2020.9250164

Barrio, R., Fernández, J., Blanco, E., Parrondo, J., Marcos, A.: Performance characteristics and internal flow patterns in a reverse-running pump-turbine. J. Mech. Eng. Sci. 226(3), 695–708 (2012). https://doi.org/10.1177/0954406211416304CrossRef

Egusquiza, E., Valero, C., Presas, A., et al.: Analysis of the dynamic response of pump-turbine impellers. Influence of the rotor. Mech. Syst. Sig. Process. 68(69), 330–341 (2016). https://doi.org/10.1016/j.ymssp.2015.05.034

González, J., Oro, J., Argüelles-Díaz, K.: Flow analysis for a double suction centrifugal machine in the pump and turbine operation modes. Int. J. Numer. Meth. Fluids 16(2), 220–236 (2009). https://doi.org/10.1002/fld.1951CrossRefMATH

10.

Rundo, M.: Models for flow rate simulation in gear pumps: a review. Energies 9(10), 1261 (2017). https://doi.org/10.3390/en10091261CrossRef

11.

Rogovyi, A., Korohodskyi, V., Khovanskyi, S., Hrechka, I., Medvediev, Y.: Optimal design of vortex chamber pump. J. Phys: Conf. Ser. 1741(1), 012018 (2021). https://doi.org/10.1088/1742-6596/1741/1/012018CrossRef

12.

Rogovyi, A., Korohodskyi, V., Medvediev, Y.: Influence of Bingham fluid viscosity on energy performances of a vortex chamber pump. Energy 218, 119432 (2021). https://doi.org/10.1016/j.energy.2020.119432CrossRef

13.

Korohodskyi, V., Kryshtopa, S., Migal, V., Rogovyi, A., Polivyanchuk, et al.: Determining the characteristics for the rational adjusting of an fuelair mixture composition in a two-stroke engine with internal carburation. East. Eur. J. Enterpr. Technol. 2(5), 39–52 (2020)

14.

Rogovyi, A., Khovanskyi, S., Hrechka, I., Gaydamaka, A.: Studies of the swirling submerged flow through a confuser. In: Ivanov, V., Pavlenko, I., Liaposhchenko, O., Machado, J., Edl, M. (eds.) DSMIE 2020. LNME, pp. 85–94. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-50491-5_9CrossRef

15.

Liu, C., Jin, Y., Zhou, J., Tang, F., Hao, C., Han, J.: Study of internal flow in cube-type bidirection passages of axial-flow pump system by numerical simulation and experiment. J. Hydroel. Eng. 30(5), 192–198 (2011)

16.

Andrenko, P., Rogovyi, A., Hrechka, I., Khovanskyi, S., Svynarenko, M.: Characteristics improvement of labyrinth screw pump using design modification in screw. J. Phys: Conf. Ser. 1741(1), 012024 (2021). https://doi.org/10.1088/1742-6596/1741/1/012024CrossRef

17.

Pavlenko, I., Simonovskiy, V., Ivanov, V., Zajac, J., Pitel, J.: Application of artificial neural network for identification of bearing stiffness characteristics in rotor dynamics analysis. In: Ivanov, V., et al. (eds.) DSMIE 2018. LNME, pp. 325–335. Springer, Cham (2019). https://doi.org/10.1007/978-3-319-93587-4_34CrossRef

18.

Pylypaka, S., Volina, T., Mukvich, M., Efremova, G., Kozlova, O.: Gravitational relief with spiral gutters, formed by the screw movement of the sinusoid. In: Ivanov, V., Pavlenko, I., Liaposhchenko, O., Machado, J., Edl, M. (eds.) DSMIE 2020. LNME, pp. 63–73. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-50491-5_7CrossRef

19.

Yao, J., Shi, W., Wu, S., et al.: Numerical calculation and experiment on pressure fluctuation in axial flow pump. Trans. Chin. Soc. Agri. Mach. 44(1), 119–124 (2013). https://doi.org/10.6041/j.issn.1000-1298.2013.S1.022

20.

Altare, G., Rundo, M.: Computational fluid dynamics analysis of gerotor lubricating pumps at high-speed: geometric features influencing the filling capability. J. Fluids Eng. 138(11), FE-15–1757 (2016). https://doi.org/10.1115/1.4033675

21.

Panchenko, A., Voloshina, A., Titova, O., Panchenko, I., Zasiadko, A.: The study of dynamic processes of mechatronic systems with planetary hydraulic motors. In: Tonkonogyi, V., et al. (eds.) InterPartner 2020. LNME, pp. 704–713. Springer, Cham (2021). https://doi.org/10.1007/978-3-030-68014-5_68CrossRef

22.

Voloshina, A., Panchenko, A., Titova, O., Panchenko, I.: Changes in the dynamics of the output characteristics of mechatronic systems with planetary hydraulic motors. J. Phys: Conf. Ser. 1741, 012045 (2021). https://doi.org/10.1088/1742-6596/1741/1/012045CrossRef

23.

Panchenko, A., Voloshina, A., Titova, O., Panchenko, I.: The influence of the design parameters of the rotors of the planetary hydraulic motor on the change in the output characteristics of the mechatronic system. J. Phys: Conf. Ser. 1741, 012027 (2021). https://doi.org/10.1088/1742-6596/1741/1/012027CrossRef

24.

Voloshina, A., Panchenko, A., Titova, O., Pashchenko, V., Zasiadko, A.: Experimental studies of a throughput of the distribution systems of planetary hydraulic motors. IOP Conf. Ser. Mater. Sci. Eng. 1021(1), 012054 (2021). https://doi.org/10.1088/1757-899X/1021/1/012054CrossRef

25.

Voloshina, A., Panchenko, A., Titova, O., Milaeva, I., Pastushenko, A.: Prediction of changes in the output characteristics of the planetary hydraulic motor. In: Tonkonogyi, V., et al. (eds.) InterPartner 2020. LNME, pp. 744–754. Springer, Cham (2021). https://doi.org/10.1007/978-3-030-68014-5_72CrossRef

26.

Panchenko, A., Voloshina, A., Titova, O., Panchenko, I., Caldare, A.: Design of hydraulic mechatronic systems with specified output characteristics. In: Ivanov, V., Pavlenko, I., Liaposhchenko, O., Machado, J., Edl, M. (eds.) DSMIE 2020. LNME, pp. 42–51. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-50491-5_5CrossRef

27.

Shah, Y.G., Vacca, A., Dabiri, S., Frosina, E.: A fast lumped parameter approach for the prediction of both aeration and cavitation in Gerotor pumps. Meccanica 53(1–2), 175–191 (2017). https://doi.org/10.1007/s11012-017-0725-yCrossRef

28.

Vacca, A., Klop, R., Ivantysynova, M.: A numerical approach for the evaluation of the effects of air release and vapour cavitation on effective flow rate of axial piston machines. Int. J. Fluid Power 11(1), 33–45 (2010). https://doi.org/10.1080/14399776.2010.10780996CrossRef

29.

Velev, E.: Study cavitation Gerotor motors, using computer simulation. Renewable energies and innovative technologies. Smolyan 64–66 (2016)

30.

Panchenko, A., Voloshina, A., Luzan, P., Panchenko, I., Volkov, S.: Kinematics of motion of rotors of an orbital hydraulic machine. IOP Conf. Ser. Mater. Sci. Eng. 1021(1), 012045 (2021). https://doi.org/10.1088/1757-899X/1021/1/012045CrossRef

31.

Biernacki, K.: Selection of the optimum tooth profile for plastic cycloidal gears. J. Mech. Eng. Sci. 228(18), 3395–3404 (2014)CrossRef

32.

Biernacki, K.: Methods of Increasing loadability for the plastic cycloidal gears. Fundament. Mach. Des. 490, 156–165 (2012)

33.

Tarelnyk, V., et al.: New method for strengthening surfaces of heat treated steel parts. IOP Conf. Ser. Mater. Sci. Eng. 233(1), 012048 (2017). https://doi.org/10.1088/1757-899X/233/1/012048CrossRef

34.

Choi, T., Kim, M., Lee, G., et al.: Design of rotor for internal gear pump using cycloid and circular-arc curves. J. Mech. Des. 134(1), 011005-12 (2012). https://doi.org/10.1115/1.4004423

35.

Panchenko, A., Voloshina, A., Panchenko, I., Titova, O., Pastushenko, A.: Reliability design of rotors for orbital hydraulic motors. IOP Conf. Ser. Mater. Sci. Eng. 708(1), 012017 (2019). https://doi.org/10.1088/1757-899X/708/1/012017CrossRef

36.

Monkova, K., et al.: Condition monitoring of Kaplan turbine bearings using vibro-diagnostics. Int. J. Mech. Eng. Robot. Res. 9(8), 1182–1188 (2020). https://doi.org/10.18178/ijmerr.9.8.1182-1188

37.

Kiurchev, S., Luzan, P., Zasiadko, A., Radionov, H., Boltianska, N.: Influence of the flow area of distribution systems on changing the operating parameters of planetary hydraulic motors. IOP Conf. Ser. Mater. Sci. Eng. 1021, 012037 (2021). https://doi.org/10.1088/1757-899X/1021/1/012037

38.

Voloshina, A., Panchenko, A., Panchenko, I., Zasiadko, A.: Geometrical parameters for distribution systems of hydraulic machines. In: Nadykto, V. (ed.) Modern Development Paths of Agricultural Production, pp. 323–336. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-14918-5_34CrossRef

39.

Voloshina, A., Panchenko, A., Boltyansky, O., Titova, O.: Improvement of manufacture workability for distribution systems of planetary hydraulic machines. In: Ivanov, V., et al. (eds.) DSMIE 2019. LNME, pp. 732–741. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-22365-6_73CrossRef

40.

Panchenko, A., Voloshina, A., Panchenko, I., Pashchenko, V., Zasiadko, A.: Influence of the shape of windows on the throughput of the planetary hydraulic motor’s distribution system. In: Ivanov, V., Pavlenko, I., Liaposhchenko, O., Machado, J., Edl, M. (eds.) DSMIE 2021. LNME, pp. 146–155. Springer, Cham (2021). https://doi.org/10.1007/978-3-030-77823-1_15CrossRef

41.

Voloshina, A., Panchenko, A., Panchenko, I., Titova, O., Zasiadko, A.: Improving the output characteristics of planetary hydraulic machines. IOP Conf. Ser. Mater. Sci. Eng. 708(1), 012038 (2019). https://doi.org/10.1088/1757-899X/708/1/012038CrossRef

42.

Onysko, O., Karabegović, I., Dašić, P., Penderetskyi, M., Melnyk, O.: The stress state of compact mechatronic satellites of a cycloidal reducer. J. Eng. Sci. 8(2), D12–D17 (2021). https://doi.org/10.21272/jes.2021.8(2).d3CrossRef

43.

Martsinkovsky, V., Yurko, V., Tarelnik, V., Filonenko, Y.: Designing radial sliding bearing equipped with hydrostatically suspended pads. Procedia Eng. 39, 157–167 (2012). https://doi.org/10.1016/j.proeng.2012.07.020CrossRef

Titel: Reducing Working Fluid Pulsations in Planetary Hydraulic Machines by Rational Design of the Distribution Systems
verfasst von: Oksana Yeremenko
Mamadamon A. Abdullo
Nataliia Boltianska
Stepan Mikhalchenko
Valentyna Verkholantseva
Verlag: Springer International Publishing
Buch: Advances in Design, Simulation and Manufacturing V
Print ISBN: 978-3-031-06043-4

Electronic ISBN: 978-3-031-06044-1

Copyright-Jahr: 2022
DOI: https://doi.org/10.1007/978-3-031-06044-1_13

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht