Skip to main content

2021 | OriginalPaper | Buchkapitel

Residual Stress Behavior on Welding Joints in Different Steels Using X-Ray Diffraction

verfasst von : A. Morales-Ortiz, J. C. Arango, A. S. Marulanda, C. C. Palacio

Erschienen in: Proceedings of the 8th International Conference on Fracture, Fatigue and Wear

Verlag: Springer Singapore

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Residual stresses are one of the main conditioning factors of the mechanical behavior of components subjected to repair by welding. The magnitudes, directions, location and homogeneity of the residual stresses change with the chemical composition of the base material, the welding process, among other variables. Although it is inevitable to induce residual stresses during the welding process, it is possible to determinate magnitudes and directions using characterization techniques such as X-ray diffraction. In this work, the residual stress distribution measurement is carried out using a portable X-ray diffractometer in the welds of two types of steel (304 stainless steel and A36 carbon steel). On 304 stainless steel, the presence of residual compressive stresses on the base material and the thermally affected zone (HAZ) and residual stresses on tension on the weld seam were identified. For its part, for A36 carbon steel, a distribution of residual stresses in tension and random compression was evidenced in all areas of the sample due to the welding process and material formation. It is concluded that the heterogeneity in the type of residual stresses distributed over the material favors the weakening of the propagation of possible cracks that appear in the areas with residual compressive stresses and the strong influence of the chemical composition of the filler material of welding in the distribution and type of residual stresses that are induced in as a result of the joining process.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literatur
2.
Zurück zum Zitat DeWald A (2016) Residual Stress in Welding—Hill Engineering DeWald A (2016) Residual Stress in Welding—Hill Engineering
3.
Zurück zum Zitat Epp J (2016) X-Ray Diffraction (XRD) Techniques for materials characterization. Elsevier Ltd Epp J (2016) X-Ray Diffraction (XRD) Techniques for materials characterization. Elsevier Ltd
4.
Zurück zum Zitat Guinebretiere R (2007) X-ray diffraction by polycrystalline materials. ISTE Guinebretiere R (2007) X-ray diffraction by polycrystalline materials. ISTE
7.
Zurück zum Zitat Kandil FA, Lord J, Fry A, Grant PV (2002) A review of residual stress measurement methods. Measurement of Residual Stress in Components, NPL Report, UK Kandil FA, Lord J, Fry A, Grant PV (2002) A review of residual stress measurement methods. Measurement of Residual Stress in Components, NPL Report, UK
8.
Zurück zum Zitat Kandil FA, Lord JD, Fry AT, Grant P V (2001) Review of residual stress measurement methods -a guide to technique selection. Crown 1:45 Kandil FA, Lord JD, Fry AT, Grant P V (2001) Review of residual stress measurement methods -a guide to technique selection. Crown 1:45
9.
Zurück zum Zitat Lu J, (U.S.) S for EM (1996) Handbook of measurement of residual stresses. Fairmont Press , Distributed by Prentice Hall PTR, Lilburn, GA, Upper Saddle River, NJ Lu J, (U.S.) S for EM (1996) Handbook of measurement of residual stresses. Fairmont Press , Distributed by Prentice Hall PTR, Lilburn, GA, Upper Saddle River, NJ
12.
Zurück zum Zitat Monin VI, Gurova T, Castello X, Estefen SF (2009) Analysis of residual stress state in welded steel plates by X-ray diffraction method. Rev Adv Mater Sci 20:172–175 Monin VI, Gurova T, Castello X, Estefen SF (2009) Analysis of residual stress state in welded steel plates by X-ray diffraction method. Rev Adv Mater Sci 20:172–175
15.
Zurück zum Zitat Nasir NSM, Razab MKAA, Mamat S, Ahmad MI (2016) Review on welding residual stress. ARPN J Eng Appl Sci 11:6166–6175 Nasir NSM, Razab MKAA, Mamat S, Ahmad MI (2016) Review on welding residual stress. ARPN J Eng Appl Sci 11:6166–6175
17.
Zurück zum Zitat Ruud CO (2000) Residual stress measurements. Mech Test Eval 8:0 Ruud CO (2000) Residual stress measurements. Mech Test Eval 8:0
18.
Zurück zum Zitat Saluja R, Moeed K (2015) Formation quantification and significance of delta ferrite for 300 series stainless steel weldments. Int J Eng Technol Manag Appl Sci Saluja R, Moeed K (2015) Formation quantification and significance of delta ferrite for 300 series stainless steel weldments. Int J Eng Technol Manag Appl Sci
19.
Zurück zum Zitat Saluja R, Moeed KM (2016) Assessment of delta ferrite for SA 240 type 304L austenitic weld metal using different filler materials. 7:493–498 Saluja R, Moeed KM (2016) Assessment of delta ferrite for SA 240 type 304L austenitic weld metal using different filler materials. 7:493–498
20.
Zurück zum Zitat Smith WF (2010) Fundamentos de la ciencia e ingeniería de materiales, 4th ed. Ciudad de México Smith WF (2010) Fundamentos de la ciencia e ingeniería de materiales, 4th ed. Ciudad de México
22.
Zurück zum Zitat Withers PJ, Bhadeshia HKDH (2001) Residual stress Part 2—Nature and origins Withers PJ, Bhadeshia HKDH (2001) Residual stress Part 2—Nature and origins
24.
Zurück zum Zitat Yavuz Peter McIntyre M, Karaman Dennis O IL, Anderoglu O (2004) Residual stress measurement using X-Ray diffraction. Texas A&M University, pp 1–64 Yavuz Peter McIntyre M, Karaman Dennis O IL, Anderoglu O (2004) Residual stress measurement using X-Ray diffraction. Texas A&M University, pp 1–64
25.
Zurück zum Zitat Zhang Y, Liu J, Zhao E, Xu X, Cheng H (2009) Elimination and evaluation of welding residual stress in sterilizers melded by combined process. Hanjie Xuebao/Transactions China Weld Inst Zhang Y, Liu J, Zhao E, Xu X, Cheng H (2009) Elimination and evaluation of welding residual stress in sterilizers melded by combined process. Hanjie Xuebao/Transactions China Weld Inst
Metadaten
Titel
Residual Stress Behavior on Welding Joints in Different Steels Using X-Ray Diffraction
verfasst von
A. Morales-Ortiz
J. C. Arango
A. S. Marulanda
C. C. Palacio
Copyright-Jahr
2021
Verlag
Springer Singapore
DOI
https://doi.org/10.1007/978-981-15-9893-7_27

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.