Ausgabe 2/2014
Inhalt (40 Artikel)
Thanks to Our Reviewers
Experimental Evidence of Truly Elastic Behavior of Artificial Sandstone Inside the Cementation Yield Surface
N. Trads, P. V. Lade
An Empirical Failure Criterion for Intact Rocks
Jun Peng, Guan Rong, Ming Cai, Xiaojiang Wang, Chuangbing Zhou
A Simplified Failure Criterion for Intact Rocks Based on Rock Type and Uniaxial Compressive Strength
Jiayi Shen, Rafael Jimenez, Murat Karakus, Chaoshui Xu
Instantaneous Friction Angle and Cohesion of 2-D and 3-D Hoek–Brown Rock Failure Criteria in Terms of Stress Invariants
Youn-Kyou Lee, A. Bobet
New Peak Shear Strength Criterion of Rock Joints Based on Quantified Surface Description
Cai-Chu Xia, Zhi-Cheng Tang, Wei-Min Xiao, Ying-Long Song
An Experimental Study on the Pre-Peak Unloading Damage Evolution of Marble
Shi-Li Qiu, Xia-Ting Feng, Jian-Qing Xiao, Chuan-Qing Zhang
The Effects of Temperature and Pressure on the Porosity Evolution of Flechtinger Sandstone
Alireza Hassanzadegan, Guido Blöcher, Harald Milsch, Luca Urpi, Günter Zimmermann
A Microstructure-Based Model to Characterize Micromechanical Parameters Controlling Compressive and Tensile Failure in Crystallized Rock
T. Kazerani, J. Zhao
Influence of Unloading Rate on the Strainburst Characteristics of Beishan Granite Under True-Triaxial Unloading Conditions
X. G. Zhao, J. Wang, M. Cai, C. Cheng, L. K. Ma, R. Su, F. Zhao, D. J. Li
Experimental Researches on Hydro-Mechanical Properties of Altered Rock Under Confining Pressures
H. L. Wang, W. Y. Xu, J. F. Shao
Dynamic Brazilian Tests of Granite Under Coupled Static and Dynamic Loads
Zilong Zhou, Xibing Li, Yang Zou, Yihui Jiang, Guonan Li
Stochastic Representation of Sedimentary Geology
M. K. Elmouttie, G. Krähenbühl, G. V. Poropat, I. Kelso
Quasi-Stochastic Analysis of Uncertainty for Modelling Structurally Controlled Failures
M. K. Elmouttie, G. V. Poropat
Estimation of the Strength of Stratified Rock Mass
Theodoros Triantafyllidis, Eleni Gerolymatou
Experimental Study of Ultrasonic Waves Propagating Through a Rock Mass with a Single Joint and Multiple Parallel Joints
Xiaolin Huang, Shengwen Qi, Songfeng Guo, Wanli Dong
Long-Wavelength Elastic Wave Propagation Across Naturally Fractured Rock Masses
Mohd Mustaqim Mohd-Nordin, Ki-Il Song, Gye-Chun Cho, Zainab Mohamed
Analysis of the Influence of a Natural Fracture Network on Hydraulic Fracture Propagation in Carbonate Formations
Zhiyuan Liu, Mian Chen, Guangqing Zhang
An Approach for Modeling Rock Discontinuous Mechanical Behavior Under Multiphase Fluid Flow Conditions
Peng-Zhi Pan, Jonny Rutqvist, Xia-Ting Feng, Fei Yan
Terrestrial Photogrammetry and Numerical Modelling for the Stability Analysis of Rock Slopes in High Mountain Areas: Aiguilles Marbrées case
M. Curtaz, A. M. Ferrero, R. Roncella, A. Segalini, G. Umili
The Dynamic Evaluation of Rock Slope Stability Considering the Effects of Microseismic Damage
N. W. Xu, F. Dai, Z. Z. Liang, Z. Zhou, C. Sha, C. A. Tang
Anisotropic Deformation of a Circular Tunnel Excavated in a Rock Mass Containing Sets of Ubiquitous Joints: Theory Analysis and Numerical Modeling
Tai-Tien Wang, Tsan-Hwei Huang
Size and Geometry Effects on Rock Fracture Toughness: Mode I Fracture
M. R. Ayatollahi, J. Akbardoost
Continuous Monitoring of Pin Tip Wear and Penetration into Rock Surface Using a New Cerchar Abrasivity Testing Device
Mohammad-Taghi Hamzaban, Hossein Memarian, Jamal Rostami
Predicting the Performance of Chain Saw Machines Based on Shore Scleroscope Hardness
Deniz Tumac
Prediction of the Rock Mass Diggability Index by Using Fuzzy Clustering-Based, ANN and Multiple Regression Methods
Omid Saeidi, Seyed Rahman Torabi, Mohammad Ataei
Improvement of Disc Cutter Performance by Water Jet Assistance
Raimondo Ciccu, Battista Grosso
Characterization of Effective Parameters in Abrasive Waterjet Rock Cutting
Tae-Min Oh, Gye-Chun Cho
Surface Miners: Evaluation of the Production Rate and Cutting Performance Based on Rock Properties and Specific Energy
Chiara Origliasso, Marilena Cardu, Vladislav Kecojevic
Stochastic Modeling Approach for the Evaluation of Backbreak due to Blasting Operations in Open Pit Mines
Mehmet Sari, Ebrahim Ghasemi, Mohammad Ataei
Effect of Porosity on Rock Brittleness
M. Heidari, G. R. Khanlari, M. Torabi-Kaveh, S. Kargarian, S. Saneie
An Experimental Study of the Mechanical Behavior of a Weak Intercalated Layer
Baotian Xu, Changhong Yan
Comparison Between Neural Networks and Multiple Regression Analysis to Predict Rock Fragmentation in Open-Pit Mines
Iman Enayatollahi, Abbas Aghajani Bazzazi, Ahamad Asadi
Comparison of Excavation Damage Zones Resulting from Blasting with Nonel Detonators and Blasting with Electronic Detonators
Hongxian Fu, Louis Ngai Yuen Wong, Yong Zhao, Zhou Shen, Chengping Zhang, Yanzhi Li
Discussion on “An Empirical Failure Criterion for Intact Rocks” by Peng et al. (2013)
R. P. Bewick, P. K. Kaiser
Author’s Reply to Discussion of the Paper “An Empirical Failure Criterion for Intact Rocks” by Peng et al. (2013)
Jun Peng, Ming Cai, Guan Rong, Chuangbing Zhou, Xiaojiang Wang
Erratum to: Fracture-Induced Anisotropic Attenuation
José M. Carcione, Juan E. Santos, Stefano Picotti