nach oben

Journal of Materials Engineering and Performance

Erschienen in:

20.04.2020

Rolling Contact Fatigue Resistance of Cryogenically Treated AISI 440C Steel

verfasst von: G. Prieto, A. Mandri, G. Rabbia, W. R. Tuckart, R. Dommarco

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 4/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

AISI 440C is a high carbon martensitic stainless steel, primarily used in bearing applications. For this study, one group of AISI 440C steel disks was quenched in oil and tempered. Another group was soaked in liquid nitrogen (− 196 °C) immediately after quenching for 5 h and then tempered. The resulting microstructures were analyzed as well as the rolling contact fatigue (RCF) performance using two methodologies, with and without artificial defects. It was found that the microstructural modifications generated by the cryogenic treatments did not improve significantly the RCF resistance of the material. However, this work supports the use of artificial defects as a valid methodology for conducting accelerated rolling contact fatigue experiments.

Vorheriger Artikel Pomelo Peel Extract as Corrosion Inhibitor for Steel in Simulated Seawater and Acidic Mediums

Nächster Artikel A Study on the Performance Evaluation of the Corroded Steel Cable by Safety Factor Based on the Strength Condition

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

D. Das, A.K. Dutta, and K.K. Ray, Correlation of Microstructure with Wear Behaviour of Deep Cryogenically Treated AISI, D2 Steel, Wear, 2009, 267, p 1371–1380. https://doi.org/10.1016/j.Wear.2008.12.051 CrossRef

V.G. Gavriljuk, V.A. Sirosh, Y.N. Petrov, A.I. Tyshchenko, W. Theisen, and A. Kortmann, Carbide Precipitation During Tempering of a Tool Steel Subjected to Deep Cryogenic Treatment, Metall. Mater. Trans. A, 2014, 45, p 2453–2465. https://doi.org/10.1007/s11661-014-2202-8 CrossRef

B. Podgornik, V. Leskovšek, and J. Vizintin, Influence of Deep-Cryogenic Treatment on Tribological Properties of P/M High-Speed Steel, Mater. Manuf. Process., 2009, 24, p 734–738. https://doi.org/10.1080/10426910902809339 CrossRef

B. Podgornik, I. Paulin, B. Zajec, S. Jacobson, and V. Leskovšek, Deep Cryogenic Treatment of Tool Steels, J. Mater. Process. Technol., 2016, 229, p 398–406. https://doi.org/10.1016/j.jmatprotec.2015.09.045 CrossRef

G. Prieto and W.R. Tuckart, Influence of Cryogenic Treatments on the Wear Behavior of AISI, 420 Martensitic Stainless Steel, J. Mater. Eng. Perform., 2017, 26(11), p 5262–5271. https://doi.org/10.1007/s11665-017-2986-y CrossRef

P. Baldissera and C. Delprete, Deep Cryogenic Treatment of AISI, 302 Stainless Steel: Part II—Fatigue and Corrosion, Mater. Des., 2010, 31, p 4731–4737. https://doi.org/10.1016/j.matdes.2010.05.015 CrossRef

P.J. Singh, S.L. Mannan, T. Jayakumar, and D.R.G. Achar, Fatigue Life Extension of Notches in AISI, 304L Weldments Using Deep Cryogenic Treatment, Eng. Fail. Anal., 2005, 12, p 263–271. https://doi.org/10.1016/j.engfailanal.2004.03.008 CrossRef

J.D. Darwin, D. Mohan Lal, and G. Nagarajan, Optimization of Cryogenic Treatment to Maximize the Wear Resistance of 18% Cr Martensitic Stainless Steel by Taguchi Method, J. Mater. Process. Technol., 2008, 195, p 241–247. https://doi.org/10.1016/j.jmatprotec.2007.05.005 CrossRef

M. Koneshlou, K. Meshinchi Asl, and F. Khomamizadeh, Effect of Cryogenic Treatment on Microstructure, Mechanical and Wear Behaviors of AISI, H13 Hot Work Tool Steel, Cryogenics (Guildf), 2011, 51, p 55–61. https://doi.org/10.1016/j.Cryogenics.2010.11.001 CrossRef

10.

K. Gu, H. Zhang, B. Zhao, J. Wang, Y. Zhou, and Z. Li, Effect of Cryogenic Treatment and Aging Treatment on the Tensile Properties and Microstructure of Ti-6Al-4 V Alloy, Mater. Sci. Eng., A, 2013, 584, p 170–176. https://doi.org/10.1016/j.msea.2013.07.021 CrossRef

11.

J. Liu, G. Li, D. Chen, and Z. Chen, Effect of Cryogenic Treatment on Deformation Behavior of As-Cast AZ91 Mg Alloy, Chin. J. Aeronaut., 2012, 25, p 931–936. https://doi.org/10.1016/S1000-9361(11)60464-0 CrossRef

12.

H.H. Trieu, L.H. Morris, M.E. Kaufman, R. Hood, and L.S. Jenkins, Investigation of Cryogenic Treatment of UHMWPE, in 16th Southern Biomedical Engineering Conference, IEEE, Apr 4-6 (Biloxi, USA, 1997), pp. 90–91.

13.

K.K. Ray and D. Das, Improved Wear Resistance of Steels by Cryotreatment: The Current State of Understanding, Mater. Sci. Technol., 2017, 33, p 340–354. https://doi.org/10.1080/02670836.2016.1206292 CrossRef

14.

D. Das, A.K. Dutta, and K.K. Ray, Sub-zero Treatments of AISI, D2 Steel: Part I. Microstructure and Hardness, Mater. Sci. Eng., A, 2010, 527, p 2182–2193. https://doi.org/10.1016/j.msea.2009.10.070 CrossRef

15.

A. Bensely, A. Prabhakaran, D. Mohan Lal, and G. Nagarajan, Enhancing the Wear Resistance of Case Carburized Steel (En 353) by Cryogenic Treatment, Cryogenics (Guildf), 2005, 45, p 747–754. https://doi.org/10.1016/j.Cryogenics.2005.10.004 CrossRef

16.

V. Leskovšek and B. Ule, Influence of Deep Cryogenic Treatment on Microstructure, Mechanical Properties and Dimensional Changes of Vacuum Heat-Treated High-Speed Steel, Heat Treat. Met., 2002, 29, p 72–76

17.

F. Meng, K. Tagashira, and H. Sohma, Wear Resistance and Microstructure of Cryogenic Treated Fe-1.4Cr-1C Bearing Steel, Scr. Metall. Mater., 1994, 31, p 865–868CrossRef

18.

F. Meng, T. Kohsuke, R. Azuma, and H. Sohma, Role of Eta-Carbide Precipitations in the Wear Resistance Improvements of Fe-12Cr-Mo-V-1.4C Tool Steel by Cryogenic Treatment, ISIJ Int., 1994, 34, p 205–210CrossRef

19.

J. Huang, Y. Zhu, X. Liao, I. Beyerlein, M. Bourke, and T. Mitchell, Microstructure of Cryogenic Treated M2 Tool Steel, Mater. Sci. Eng., A, 2003, 339, p 241–244. https://doi.org/10.1016/S0921-5093(02)00165-X CrossRef

20.

G. Prieto, J.E. Perez Ipiña, and W.R. Tuckart, Cryogenic Treatments on AISI, 420 Stainless Steel: Microstructure and Mechanical Properties, Mater. Sci. Eng., A, 2014, 605, p 236–243. https://doi.org/10.1016/j.msea.2014.03.059 CrossRef

21.

A.I. Tyshchenko, W. Theisen, A. Oppenkowski, S. Siebert, O.N. Razumov, A.P. Skoblik, V.A. Sirosh, Y.N. Petrov, and V.G. Gavriljuk, Low-Temperature Martensitic Transformation and Deep Cryogenic Treatment of a Tool Steel, Mater. Sci. Eng., A, 2010, 527, p 7027–7039. https://doi.org/10.1016/j.msea.2010.07.056 CrossRef

22.

V.G. Gavriljuk, W. Theisen, V.V. Sirosh, E.V. Polshin, A. Kortmann, G.S. Mogilny, Y.N. Petrov, and Y.V. Tarusin, Low-Temperature Martensitic Transformation in Tool Steels in Relation to their Deep Cryogenic Treatment, Acta Mater., 2013, 61, p 1705–1715. https://doi.org/10.1016/j.actamat.2012.11.045 CrossRef

23.

F. Farhani, K.S. Niaki, S.E. Vahdat, and A. Firozi, Study of Effects of Deep Cryotreatment on Mechanical Properties of 1.2542 Tool Steel, Mater. Des., 2012, 42, p 279–288. https://doi.org/10.1016/j.matdes.2012.05.059 CrossRef

24.

A. Akhbarizadeh, A. Shafyei, and M.A. Golozar, Effects of Cryogenic Treatment on Wear Behavior of D6 Tool Steel, Mater. Des., 2009, 30, p 3259–3264. https://doi.org/10.1016/j.matdes.2008.11.016 CrossRef

25.

F.J. da Silva, S.D. Franco, Á.R. Machado, E.O. Ezugwu, and A.M. Souza, Performance of Cryogenically Treated HSS Tools, Wear, 2006, 261, p 674–685. https://doi.org/10.1016/j.Wear.2006.01.017 CrossRef

26.

F. Cajner, V. Leskovšek, D. Landek, and H. Cajner, Effect of Deep-Cryogenic Treatment on High Speed Steel Properties, Mater. Manuf. Process., 2009, 24, p 743–746. https://doi.org/10.1080/10426910902809743 CrossRef

27.

H. Wang, J. Li, C.-B. Shi, J. Li, and B. He, Evolution of Carbides in H13 Steel in Heat Treatment Process, Mater. Trans., 2017, 58, p 152–156. https://doi.org/10.2320/matertrans.m2016268 CrossRef

28.

D. Das, A.K. Dutta, and K.K. Ray, On the Refinement of Carbide Precipitates by Cryotreatment in AISI, D2 Steel, Philos. Mag., 2009, 89, p 55–76. https://doi.org/10.1080/14786430802534552 CrossRef

29.

V. Firouzdor, E. Nejati, and F. Khomamizadeh, Effect of Deep Cryogenic Treatment on Wear Resistance and Tool Life of M2 HSS Drill, J. Mater. Process. Technol., 2008, 206, p 467–472CrossRef

30.

G. Prieto, W.R. Tuckart, and J.E. Perez Ipiña, Influence of a Cryogenic Treatment on the Fracture Toughness of an AISI, 420 Martensitic Stainless Steel, Mater. Tehnol., 2017, 51(4), p 591–596. https://doi.org/10.17222/mit.2016.126 CrossRef

31.

S. Li, N. Min, J. Li, X. Wu, C. Li, and L. Tang, Experimental Verification of Segregation of Carbon and Precipitation of Carbides due to Deep Cryogenic Treatment for Tool Steel by Internal Friction Method, Mater. Sci. Eng. A, 2013, 575, p 51–60. https://doi.org/10.1016/j.msea.2013.03.070 CrossRef

32.

M. Villa, K. Pantleon, and M.A.J. Somers, Evolution of Compressive Strains in Retained Austenite During Sub-zero Celsius Martensite Formation and Tempering, Acta Mater., 2014, 65, p 383–392. https://doi.org/10.1016/j.actamat.2013.11.007 CrossRef

33.

A. Idayan, A. Gnanavelbabu, and K. Rajkumar, Influence of Deep Cryogenic Treatment on the Mechanical Properties of AISI, 440C Bearing Steel, Procedia Eng., 2014, 97, p 1683–1691. https://doi.org/10.1016/j.proeng.2014.12.319 CrossRef

34.

K. Clemons, C. Lorraine, G. Salgado, A. Taylor, J. Ogren, P. Umin, and O.S. Es-Said, Effects of Heat Treatments on Steels for Bearing Applications, J. Mater. Eng. Perform., 2007, 16, p 592–596. https://doi.org/10.1007/s11665-007-9075-6 CrossRef

35.

J.R. Yang, T.H. Yu, and C.H. Wang, Martensitic Transformations in AISI, 440C Stainless Steel, Mater. Sci. Eng. A., 2006, 438-440, p 276–280. https://doi.org/10.1016/j.msea.2006.02.098 CrossRef

36.

A.S. Pandkar, N. Arakere, and G. Subhash, Microstructure-Sensitive Accumulation of Plastic Strain due to Ratcheting in Bearing Steels Subject to Rolling Contact Fatigue, Int. J. Fatigue, 2014, 63, p 191–202. https://doi.org/10.1016/j.ijFatigue.2014.01.029 CrossRef

37.

A. Bhattacharyya, G. Subhash, and N. Arakere, Evolution of Subsurface Plastic Zone due to Rolling Contact Fatigue of M-50 NiL Case Hardened Bearing Steel, Int. J. Fatigue, 2014, 59, p 102–113. https://doi.org/10.1016/j.ijFatigue.2013.09.010 CrossRef

38.

C. Qing, S. Eryn, Z. Dongmei, G. Juwen, and F. Zhonghe, Measurement of the Critical Size of Inclusions Initiating Contact Fatigue Cracks and its Application in Bearing Steel, Wear, 1991, 147, p 285–294CrossRef

39.

R. Dommarco, P. Bastias, G. Hahn, and C. Rubin, The Use of Artificial Defects in the 5-Ball-Rod Rolling Contact Fatigue Experiments, Wear, 2002, 252, p 430–437. https://doi.org/10.1016/S0043-1648(01)00899-7 CrossRef

40.

T.E. Tallian, The Failure Atlas for Hertz Contact Machine Elements, ASME Press, New York, 1992

41.

F. Sadeghi, B. Jalalahmadi, T.S. Slack, N. Raje, and N.K. Arakere, A Review of Rolling Contact Fatigue, J. Tribol., 2009, 131, p 041403. https://doi.org/10.1115/1.3209132 CrossRef

42.

V. Gupta, P. Bastias, G.T. Hahn, and C.A. Rubin, Influence of Indent Geometry on Repeated Two-Dimensional Rolling Contact, J. Tribol., 1995, 117, p 655. https://doi.org/10.1115/1.2831531 CrossRef

43.

R.C. Dommarco, P.C. Bastias, C.A. Rubin, and G.T. Hahn, The Influence of Material Build Up Around Artificial Defects on Rolling Contact Fatigue Life and Failure Mechanism, Wear, 2006, 260, p 1317–1323. https://doi.org/10.1016/j.Wear.2005.09.009 CrossRef

44.

G.F. Vander Voort, Metallography: Principles and Practice, ASM International, Cleveland, 1999

45.

F. de Chaumont, S. Dallongeville, N. Chenouard, N. Hervé, S. Pop, T. Provoost, V. Meas-Yedid, P. Pankajakshan, T. Lecomte, Y. Le Montagner, T. Lagache, A. Dufour, and J.C. Olivo-Marin, Icy: an Open Bioimage Informatics Platform for Extended Reproducible Research, Nat. Methods, 2012, 9, p 690–696. https://doi.org/10.1038/nmeth.2075 CrossRef

46.

P. Moens, M. Teutónico, and R. Dommarco, Desarrollo de un Equipo para Evaluar la Resistencia a la Fatiga de Contacto por Rodadura (Development of a Test Rig for Rolling Contact Fatigue), Jornadas SAM-CONAMET 2000, November 2-5, 2000, (Viña del Mar), SAM-CONAMET (in spanish)

47.

B.J. Hamrock and D. Dowson, Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part III—Fully Flooded Results, J. Lubr. Technol., 1977, 99, p 264–275CrossRef

48.

K.L. Johnson, Contact Mechanics and the Wear of Metals, Wear, 1995, 190, p 162–170CrossRef

49.

G.T. Hahn, V. Bhargava, and Q. Chen, The Cyclic Stress-Strain Properties, Hysteresis Loop Shape, and Kinematic Hardening of Two High-Strength Bearing Steels, Metall. Mater. Trans. A, 1990, 21, p 653–665CrossRef

50.

B.J. Hamrock and D. Brewe, Simplified Solution for Stresses and Deformations, J. Lubr. Technol., 1983, 105, p 171–177CrossRef

51.

D.W. Hetzner and W. Van Geertruyden, Crystallography and Metallography of Carbides in High Alloy Steels, Mater. Charact., 2008, 59, p 825–841CrossRef

52.

A. Bensely, A. Prabhakaran, and G. Nagarajan, Enhancing the Wear Resistance of Case Carburized Steel (En 353) by Cryogenic Treatment, Mater. Sci. Eng. A, 2008, 479, p 229–235CrossRef

53.

Y.Y. Su, L.H. Chiu, T.L. Chuang, C.L. Huang, C.Y. Wu, and K.C. Liao, Retained Austenite Amount Determination Comparison in JIS SKD11 Steel Using Quantitative Metallography and X-Ray Diffraction Methods, Adv. Mater. Res., 2012, 482-484, p 1165–1168. https://doi.org/10.4028/www.scientific.net/AMR.482-484.1165 CrossRef

54.

P. Rycerz, A. Olver, and A. Kadiric, Propagation of Surface Initiated Rolling Contact Fatigue Cracks in Bearing Steel, Int. J. Fatigue, 2017, 97, p 29–38. https://doi.org/10.1016/j.ijFatigue.2016.12.004 CrossRef

55.

S. Coulon, F. Ville, and T. Lubrecht, Experimental Investigations of Rolling Contact Fatigue of Dented Surfaces Using Artificial Defects, Life Cycle Tribol., 2005, https://doi.org/10.1016/S0167-8922(05)80071-9 CrossRef

56.

G. Lundberg, A. Palmgren, Dynamic Capacity of Rolling Bearings, Generalstabens litografiska anstalts förlag, Stockholm, 1947

57.

K.L. Johnson, Contact Mechanics, Cambridge University Press, Cambridge, 1985CrossRef

58.

B. Alfredsson, M. Olsson, A Mechanism for Contact Fatigue, Fatigue 2000—Fatigue and Durability Assessment of Materials, Components and Structures, M.R. Blache, P.A. Blackmore, April 10-12 (Cambridge, United Kingdom, 2000), pp. 379–386.

59.

A.F. Bower, The Influence of Crack Face Friction and Trapped Fluid on Surface Initiated Rolling Contact Fatigue Cracks, J. Tribol., 1988, 110(4), p 704–711. https://doi.org/10.1115/1.3261717 CrossRef

60.

J. Dahlberg and B. Alfredsson, Influence of a Single Axisymmetric Asperity on Surface Stresses During Dry Rolling Contact, Int. J. Fatigue, 2007, 29, p 909–921CrossRef

61.

P. Lamagnere, R. Fougeres, G. Lormand, A. Vincent, D. Girodin, G. Dudragne, and F. Vergne, A Physically Based Model for Endurance Limit of Bearing Steels, J. Tribol., 1998, 120, p 421–426. https://doi.org/10.1115/1.2834565 CrossRef

62.

A.A. Lubrecht, Surface Damage-Comparison of Theoretical and Experimental Endurance Lives of Rolling Bearings, in Proceedings of the Japan International Tribology Conference on Nagoya 1990, Japanese Society of Tribologists, Oct 29-Nov 1 (Nagoya, Japan, 1990)

63.

G. Lormand, P. Meynaud, A. Vincent, G. Baudry, D. Girodin, and G. Dudragne, From Cleanliness to Rolling Fatigue Life of Bearings—A New Approach, Bearing. Steels Into 21st Century, J. Hoo and W. Green, Ed., ASTM International, West Conshohocken, 1998,

64.

J.M. Torralba, L. Esteban, E. Bernardo, and M. Campos, Understanding Contribution of Microstructure to Fracture Behaviour of Sintered Steels, Powder Metall., 2014, 57, p 357–364. https://doi.org/10.1179/1743290114Y.0000000119 CrossRef

Titel: Rolling Contact Fatigue Resistance of Cryogenically Treated AISI 440C Steel
verfasst von: G. Prieto
A. Mandri
G. Rabbia
W. R. Tuckart
R. Dommarco
Publikationsdatum: 20.04.2020
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 4/2020
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-020-04777-y

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2020

Shape Memory Effects and Work Output of [001] Ni55Fe18Ga27 Single Crystals in Torsion Mode

Validation of Methods to Measure the Hardness and Elastic Modulus of Cold-Sprayed Al-ZN Composite Coatings

Temperature-Dependent Isothermal Oxidation Behavior of a Ni-20Cr-18W Superalloy in Static Air

Mechanical Properties and Conductivity of Low-Pressure Die-Cast 319 Aluminum Prepared with Hot Isostatic Pressing, Thermal Treatment, or Chemical Treatment

Densification, Microstructure Evolution and Properties of B4C-NiAl Composite

Improved Adhesion and Corrosion Resistant Performance of Polyurethane Coatings on Anodized Mg Alloy for Aerospace Applications

Premium Partner

Marktübersichten