nach oben

Erschienen in:

2017 | OriginalPaper | Buchkapitel

1. Rubber Nanoblends: State of the Art, New Challenges and Opportunities

verfasst von : Visakh P.M.

Erschienen in: Rubber Nano Blends

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The present chapter deals with a brief account on various topics in rubber nano blends preparation, characterization and applications. This chapter discussed with different topics such natural rubber nano blends, nitrile rubber latex blends, polyurethane rubber based nano blends, chlorosulphonated rubber based nano blends, polybutadiene rubber based nano blends, styrene butadiene rubber based nano blends, polychloroprene rubber based nano blends and ethylene propylene diene rubber nano blends.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nächstes Kapitel Natural Rubber Nanoblends: Preparation, Characterization and Applications

Suil G et al (2008) Preparation and properties of natural rubber composites reinforced with pretreated carbon nanotubes. Polym Adv Technol 19:1543–1549

Bendahou A, Kaddami H, Dufresne A (2010) Investigation on the effect of cellulosic nanoparticles morphology on the properties of natural rubber based nanocomposites. Eur Polymer J 46:609–620CrossRef

Jamal EMA et al (2009) Synthesis of nickel–rubber nanocomposites and evaluation of their dielectric properties. Mater Sci Eng B 156:24–31CrossRef

Flavio C et al (2014) Organic acids and protein compounds causing the photoluminescence properties of natural rubber membranes and the quenching phenomena from Au nanoparticle incorporation. Luminescence 29:1047–1052CrossRef

Chen Y, Yuan D, Xu C (2014) Dynamically vulcanized biobased polylactide/natural rubber blend material with continuous cross-linked rubber phase. ACS Appl Mater Interfaces 6:3811–3816CrossRef

Parulekar Y, Mohanty AK (2006) Biodegradable toughened polymers from renewable resources: blends of polyhydroxybutyrate with epoxidized natural rubber and maleated polybutadiene. Green Chem 8:206–213CrossRef

Paul DR, Robeson LM (2008) Polymer nanotechnology: nanocomposites. Polymer 49:3187–3204CrossRef

Alex R, Nah C (2006) Studies on natural rubber/acrylonitrile butadiene rubber/organoclay nanocomposites. Plast Rubber Compos 35:219–225CrossRef

Lewan MV (1998) NR/NBR blends—compounding for food contact applications. In: Tinker AJ, Jones KP (eds) Blends of natural rubber. Chapman & Hall, London, pp 94–105CrossRef

10.

Tatjana R, Saulute B, Krzysztof P, Jan P (2006) Application of polyurethane-based materials for immobilization of enzymes and cells: a review. Chemija 17:74–89

11.

Sonnenschein MF, Guillaudeu SJ, Landes BG, Wendt BL (2010) Comparison of adipate and succinate polyesters in thermoplastic polyurethanes. Polymer 51:3685–3692CrossRef

12.

Robert CK (2008) In: Pascal F (ed) Handbook of specialty elastomers (Chapter 4), CRC Press, Raton, pp 134–154

13.

John S (1997) In: Arcella V, Ferro R (eds) Modern fluoropolymers (Chapter 2), Wiley, West Sussex, pp 71–90

14.

Palanivelu K, Sivaraman P, Sharma SK, Verma SK (2003) Int J Plast Technol 7:133

15.

Abdeen Z (2014) Enhanced recovery of Pb2⁺ ions from aquatic media 4 by using polyurethane composite as adsorbent, environmental process, pp 1–15. doi:10.1007/s40710-014-0048-0

16.

Flory PJ (1946) Ind Eng Chem 38(4):417–436CrossRef

17.

Fu SY, Xi-Qiao F, Bernd L, Yiu-Wing M (2008) Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites. Compos B 39:933–961CrossRef

18.

Marković G, Samaržija-Jovanović S, Jovanović V, Marinović-Cincović M (2010) J Therm Anal Calor 100:881–888CrossRef

19.

Essawy H, El-Nashar D (2004) Polym Test 23(7):803–807CrossRef

20.

Marković G, Radovanović B, Marinović-Cincović M, Budinski-Simendić J (2006) Kautch Gummi Kunst 5:251–255

21.

Voet A (1980) J Polym Sci 15:327–373

22.

Zhang L, Wang Y, Wang Y, Sui Y, Yu D (2000) J Appl Polym Sci 78(11):1873–1878CrossRef

23.

Coran AY, Hamed P, Goettler LA (1976) Rubber Chem Technol 49:1167–1181CrossRef

24.

Pandit R, Berkessel A, Lach R, Grellmann W, Adhikari R (2012) Synthesis and characterization of nanostructured blends of epoxy resin and block copolymers. Nepal J Sci Technol 13(1):81–88

25.

Corish PJ, Powell BDW (1974) Elastomer blends, rubber, chemistry and technology, vol 47(03), pp 481–510

26.

Zanzig DJ, Yang X, Cohen MP (2010) Tyre with component comprised of a blend of polybutadiene rubber and composite of styrene/butadiene elastomer which contains exfoliated clay platelets, US 7,714,055 B2 to Goodyear

27.

Go JH, Ha CS (1996) Rheology and properties of EPDM/BR blends with or without a homogenizing agent or a coupling agent. J Appl Polym Sci 62(03):509–521CrossRef

28.

Zhang Y, Ge S, Tang B, Koga T, Rafailovich MH, Sokolov JC, Peiffer DG, Li Z, Dias AJ, McElrath KO, Lin MY, Satija SK, Urquhart SG, Ade H, Nguyen D (2001) Effect of carbon black and silica fillers in elastomer blends. Macromolecules 34:7056–7065CrossRef

29.

Bottazzo J, Guglielmi M, Polizzi S, Brusatin G (2013) Natural rubber/cis-1,4-polybutadiene nanocomposites: vulcanization behavior, mechanical properties, and thermal stability. In: Polymer engineering and science, pp 671–678

30.

Saeed F, Ansarifar A, Ellis R, Meskel Y, Irfan MS (2012) Two advanced styrene-butadiene/polybutadiene rubber blends filled with a silanized silica nanofiller for potential use in passenger car tire tread compound. J Appl Polym Sci 123:1518–1529CrossRef

31.

Debapriya D, Panda PK, Bhunia S, Roy M (2014) Effect of sol-gel-derived nano-silica on the properties of natural rubber-poly butadiene rubber-reclaim rubber ternary blends/silica nanocomposites. Polym Plast Technol Eng 53(11):1131–1141CrossRef

32.

Mangaraj D (2002) Elastomer blends. Rubber Chem Technol 75(03):365–427CrossRef

33.

Shanks RA, Kong I (2013) General purpose elastomers: structure, chemistry, physics and performance. In: Advances in elastomers I, advanced structured materials, vol 11. Springer, Berlin. doi:10.1007/978-3-642-20925-3_2

34.

Deepalekshmi P, Visakh PM, Mathew AP, Chandra AK, Thomas S (2013) Advances in elastomers I, advanced structured materials 11, Springer, Heidelberg. doi:10.1007/978-3-642-20925-3_1

35.

Friedrich K, Fakirov S, Zhang Z (2005) Polymer composites from nano- to macro-scale

36.

Apostolo M, Triulzi F (2004) Properties of fluoroelastomer/semicrystalline perfluoropolymer nano-blends. J Fluor Chem 125:303–314CrossRef

37.

Hu GH, Cartier H (1999) Reactive extrusion: toward nano blends. Macromolecules 32:4713–4718CrossRef

38.

Boonmahitthisud A, Chuayjuljit S (2012) Effects of nanosized polystyrene and polystyrene- encapsulated nanosilica on physical properties of natural rubber/styrene butadiene rubber nanocomposites. Poly Plast Technol Eng 51(3):311–316CrossRef

39.

Prasertsri S, Lagarde F, Rattanasom N, Sirisinha C, Daniel P (2013) Raman spectroscopy and thermal analysis of gum and silica-filled NR/SBR blends prepared from latex system. Polym Test 32:852–861

40.

Pal K, Rajasekar R, Kang DJ, Zhang ZX, Pal SK, Das CK, Kim JK (2010) Effect of fillers on natural rubber/high styrene rubber blends with nano silica: morphology and wear, Mater Des 31:677–686

41.

Hosseini SM, Madaeni SS, Khodabakhshi AR (2010) Preparation and characterization of PC/SBR heterogeneous cation exchange membrane filled with carbon nano-tubes. J Membr Sci 362:550–559CrossRef

42.

Stephen R, Ranganathaiah C, Varghese S, Joseph K (2006) Sabu Thomas, Gas transport through nano and micro composites of natural rubber (NR) and their blends with carboxylated styrene butadiene rubber (XSBR) latex membranes. Polymer 47:858–870CrossRef

43.

Tancharernrat T, Rempel GL, Prasassarakich P (2014) Preparation of styrene butadiene copolymer–silica nanocomposites via differential microemulsion polymerization and NR/SBR–SiO₂ membranes for pervaporation of water–ethanol mixtures. Chem Eng J 258:290–300CrossRef

44.

Mohamed RM (2013) Radiation induced modification of NBR and SBR montmorillonite nanocomposites, J Ind Eng Chem 19:80–86

45.

Deuri AS, Bhowmick AK (1987) J Appl Polym Sci 34:2205–2222CrossRef

46.

Ramesan MT, Mathew G, Kuriakose B, Alex R (2001) Eur Polym J 37:719–728

47.

Lewitzke C, Lee P (2001) Application of elastomeric components for noise and vibration isolation in the automotive industry. SAE technical paper 2001-01-1447, doi:10.4271/2001-01-1447

48.

Brydson JA (1978) Rubber chemistry. Applied Science Publishers, London

49.

Deuri SA, De PP, Bhowmick AK, De SK (1988) Studies on the ageing of EPDM based rocket insulator compound by stress relaxation and the effect of propellant binder. Polym Degrad Stab 20(2):135–148CrossRef

50.

Jovanović V, Samaržija-Jovanović S, Budinski-Simendić J, Marković G, Marinović-Cincović M, Composites based on carbon black reinforced NBR/EPDM rubber blends. Compos Part B 45:333–340

51.

Kurian T, De PP, Khastgir D, Tripathy DK, De SK, Peiffer DG (1995) Reinforcement of EPDM-based ionic thermoplastic elastomer by carbon black. Polymer 36:3875–3884

52.

Montserrat S, Málek J, Colomer P (1998) Thermal degradation kinetics of epoxy-anhydride resins: I. Influence of a silica filler. Thermochim Acta 313:83–95CrossRef

53.

Turmanova SCh, Genieva SD, Dimitrova AS, Vlaev LT (2008) Non-isothermal degradation kinetics of filled with rise husk ash polypropene composites. Express Polym Lett 2:133–146CrossRef

54.

Valentini L, Bolognini A, Alvino A, Bon SB, Martin-Gallego M, Lopez-Manchado MA (2014) Pyroshock testing on graphene based EPDM nanocomposites. Compos B Eng 60:479–484

55.

Bhuvaneswari CM, Sureshkumar SM, Kakade SD, Gupta M (2006) Ethylene-propylene diene rubber as a futuristic elastomer for insulation of solid rocket motors. Defense Sci J 56:309–320CrossRef

56.

Fan JL, Tsai S-H, Tu F-H, Tu Y-T (2007) Low density rocket motor insulation, United States patent application, Publication No. US2007/0112091 A1, 17 May 2007

57.

Uyarel AY, Pektas I (1996) A thermal analysis investigation of new insulator compositions based on EPDM and phenolic resin. J Therm Anal 46:163–176CrossRef

58.

Deuri AS, Bhowmick AK (1986) Ageing of rocket insulator compound based on EPDM. Polym Degrad Stabil 16:221–239CrossRef

59.

Deuri AS, Bhowmick AK (1987) Degradation of rocket insulator at high temperature. J Therm Anal 32:755–770CrossRef

60.

Harvey AR, Ellertson JW (2003) Rocket motor insulation containing hydrophobic particles, United States patent no. US 6,606,852 B1, Aug 2003

Titel: Rubber Nanoblends: State of the Art, New Challenges and Opportunities
verfasst von: Visakh P.M.
Verlag: Springer International Publishing
Buch: Rubber Nano Blends
Print ISBN: 978-3-319-48718-2

Electronic ISBN: 978-3-319-48720-5

Copyright-Jahr: 2017
DOI: https://doi.org/10.1007/978-3-319-48720-5_1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht