Skip to main content
main-content

Zeitschrift

Science China Technological Sciences

Science China Technological Sciences 10/2012

Ausgabe 10/2012

Inhaltsverzeichnis ( 33 Artikel )

01.10.2012 | Ausgabe 10/2012

Development of a soil-plant-atmosphere continuum model (HDS-SPAC) based on hybrid dual-source approach and its verification in wheat field

YuTing Yang, SongHao Shang, Huade Guan

01.10.2012 | Progress of Projects Supported by NSFC | Ausgabe 10/2012

A new criterion for defining the breakpoint of the wetted perimeter-discharge curve and its application to estimating minimum instream flow requirements

BaoHui Men, ChangMing Liu, ChunKun Lin

01.10.2012 | Progress of Projects Supported by NSFC | Ausgabe 10/2012

Piezoelectric active control for tail buffeting at high angle of attack

Wei Wang, XinPing Zhang, ZhiChun Yang, Bin Li, JinLi Liu

01.10.2012 | Progress of Projects Supported by NSFC | Ausgabe 10/2012

Aeroelastic trim and flight loads analysis of flexible aircraft with large deformations

Chao Yang, LiBo Wang, ChangChuan Xie, Yi Liu

01.10.2012 | Progress of Projects Supported by NSFC | Ausgabe 10/2012

Path planning of unmanned aerial vehicle based on improved gravitational search algorithm

Pei Li, HaiBin Duan

01.10.2012 | Ausgabe 10/2012

Aeroelastic stability analysis of heated panel with aerodynamic loading on both surfaces

Jian Zhou, ZhiChun Yang, YingSong Gu

01.10.2012 | Ausgabe 10/2012

Review of studies on structural performance of recycled aggregate concrete in China

JianZhuang Xiao, Mulife Tawana, Xiao Huang

01.10.2012 | Ausgabe 10/2012

Scattering simulation and reconstruction of a 3D complex target above an underlying surface using SIMO radar with plane array

Wei Li, YaQiu Jin

01.10.2012 | Ausgabe 10/2012

Theoretical development for DSMC local time stepping technique

GuoBiao Cai, Wei Su, FengLong Hou

01.10.2012 | Ausgabe 10/2012

Numerical study of high-pressure GO2/GH2 combustion of a single-element injector

XiaoWei Wang, GuoBiao Cai, HongFa Huo

01.10.2012 | Ausgabe 10/2012

Comparison between the ring current energy injection and decay under southward and northward IMF Bz conditions during geomagnetic storms

XiaoFei Shi, QiuGang Zong, YongFu Wang

01.10.2012 | Ausgabe 10/2012

Study on the flow field and concentration characteristics of the multiple tandem jets in crossflow

ZhiWei Li, WenXin Huai, ZhongDong Qian

01.10.2012 | Ausgabe 10/2012

The suction force effect analysis of large civil aircraft ditching

Tao Zhang, Shu Li, HengChao Dai

01.10.2012 | Ausgabe 10/2012

Numerical simulation of rotor-airframe aerodynamic interaction based on unstructured dynamic overset grids

HeYong Xu, ZhengYin Ye

01.10.2012 | Ausgabe 10/2012

Static and dynamic design based on hierarchical optimization for materials and structure of porous metals

YuanDong Liu, YiHui Yin, ZhongZe Guo

01.10.2012 | Ausgabe 10/2012

Experimental study on a designed jet cavitation device for producing two-dimensional nanosheets

JinZhi Li, Min Yi, ZhiGang Shen, ShuLin Ma, XiaoJing Zhang, YuShan Xing

01.10.2012 | Ausgabe 10/2012

Periodic switching oscillation and mechanism in a periodically switched BZ reaction

XiangHong Li, Chun Zhang, Yue Yu, QinSheng Bi

01.10.2012 | Ausgabe 10/2012

Prediction of the conducted EMI in PWM converter system with parasitic parameters considered

Bin Liang, KeXin Wei, YouJun Yue

01.10.2012 | Ausgabe 10/2012

OpenMP-based parallel transient stability simulation for large-scale power systems

QuanYuan Jiang, Han Jiang

01.10.2012 | Ausgabe 10/2012

Optimization of heat transfer and heat-work conversion based on generalized heat transfer law

XueTao Cheng, WenHua Wang, XinGang Liang

01.10.2012 | Ausgabe 10/2012

New experimental method for inundation effect of film condensation on horizontal tube bundle

ZhiXian Ma, JiLi Zhang, DeXing Sun

01.10.2012 | Ausgabe 10/2012

Study on the onset temperature of a standing-wave thermoacoustic engine based on circuit network theory

LiMin Qiu, BiHui Lai, YiTao Zhao, DaMing Sun, XueJun Zhang, YanFeng Li

01.10.2012 | Ausgabe 10/2012

Internal heat transfer coefficients in microporous media with rarefaction effects

RuiNa Xu, YuLi Huang, PeiXue Jiang, BuXuan Wang

01.10.2012 | Ausgabe 10/2012

Modeling and behaviours of rockfill materials in three-dimensional stress space

Yang Xiao, HanLong Liu, JunGao Zhu, WeiCheng Shi

01.10.2012 | Ausgabe 10/2012

Inspection of reinforced concrete interface delamination using ultrasonic guided wave non-destructive test technique

DongSheng Li, Tao Ruan, JunHui Yuan

01.10.2012 | Ausgabe 10/2012

A scientific study on the Xing kiln of ancient China

XiaoKe Lu, WeiDong Li, HongJie Luo, LiSen Han, HuiMin Wang, Qiang Li

01.10.2012 | Ausgabe 10/2012

Influence of structure transition on plastic behaviors of iron based ordered alloys

WeiMin Mao, Ping Yang

01.10.2012 | Ausgabe 10/2012

A stiffness-matching based evaluation approach for compliance of mechanical systems in shield tunneling machines

Yong Zhao, Hao Wang, HaiDong Yu, XinMin Lai, ZhongQin Lin

01.10.2012 | Ausgabe 10/2012

Effect of the number of layers on the bond strength for multi-layer brittle coating-substrate system

YongGuang Wang, ZiFeng Ni, GuoZhong Chen, AnQi Chen, YongShuai Su, YongWu Zhao

01.10.2012 | Ausgabe 10/2012

Hybrid undulatory kinematics of a robotic Mackerel (Scomber scombrus): Theoretical modeling and experimental investigation

Li Wen, TianMiao Wang, GuanHao Wu, JianHong Liang

01.10.2012 | Ausgabe 10/2012

Numerical simulation of the Rayleigh-Taylor instability using the MPS method

HuiFang Cheng, ShengYao Jiang, HanLiang Bo, RiQiang Duan

01.10.2012 | Ausgabe 10/2012

Effect of cooling rate on β →α transformation during quenching of a Zr-0.85Sn-0.4Nb-0.4Fe-0.1Cr-0.05Cu alloy

LinJiang Chai, BaiFeng Luan, JianWei Chen, Jun Zhou, Qing Liu

01.10.2012 | Ausgabe 10/2012

Progress in control approaches for hypersonic vehicle

HaiBin Duan, Pei Li

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise