Skip to main content


Science China Technological Sciences

Science China Technological Sciences 2/2013

Ausgabe 2/2013

Inhaltsverzeichnis ( 30 Artikel )

01.02.2013 | Ausgabe 2/2013

Novel N-hit single event transient mitigation technique via open guard transistor in 65nm bulk CMOS process

PengCheng Huang, ShuMing Chen, JianJun Chen, BiWei Liu

01.02.2013 | Ausgabe 2/2013

Analysis of the complex morphology of sediment particle surface based on electron microscope images

ZhiHe Chen, HongWei Fang

01.02.2013 | Ausgabe 2/2013

A radiation-hardened-by-design technique for suppressing SET in charge pump of PLL frequency synthesizer

BenGuang Han, ZhongJie Guo, XiHu Wang, LongSheng Wu, YouBao Liu

01.02.2013 | Ausgabe 2/2013

Experimental study of the effect of blade tip clearance and blade angle error on the performance of mixed-flow pump

Hao Bing, ShuLiang Cao, ChengLian He, Li Lu

01.02.2013 | Ausgabe 2/2013

Constructal optimization for H-shaped multi-scale heat exchanger based on entransy theory

HuiJun Feng, LinGen Chen, ZhiHui Xie, FengRui Sun

01.02.2013 | Ausgabe 2/2013

Aerodynamic inverse design optimization for turbine cascades based on control theory

ZhenPing Feng, HaiTao Li, LiMing Song, YingChen Li

01.02.2013 | Ausgabe 2/2013

Oil production rate predictions for steam assisted gravity drainage based on high-pressure experiments

Jia Guo, Cheng Zan, DeSheng Ma, Lin Shi

01.02.2013 | Ausgabe 2/2013

An optimized transmission line model of grounding electrodes under lightning currents

Lin Yang, GuangNing Wu, XiaoBin Cao

01.02.2013 | Ausgabe 2/2013

Fault component integrated impedance-based pilot protection scheme for EHV/UHV transmission line with thyristor controlled series capacitor (TCSC) and controllable shunt reactor (CSR)

ShiEn He, JaLe Suonan, XiaoNing Kang, ZaiBin Jiao

01.02.2013 | Ausgabe 2/2013

Principle and theoretical analysis of continuous roll forming for three-dimensional surface parts

ZhongYi Cai, MingZhe Li

01.02.2013 | Ausgabe 2/2013

Control theorem of a universal uniform-rotating magnetic vector for capsule robot in curved environment

YongShun Zhang, Na Wang, ChunYu Du, Ying Sun, DianLong Wang

01.02.2013 | Ausgabe 2/2013

Lubricating properties of oil-in-water emulsion with low oil concentration: Competitive wetting effect

ShuHai Liu, GuiBin Tan

01.02.2013 | Ausgabe 2/2013

Investigation on structure and dynamic property of liquid Pd-Cu-Ni-P alloys using ab initio molecular dynamics simulation

JingYu Qin, TingKun Gu, ShaoPeng Pan, XiuFang Bian, Tao Zhang

01.02.2013 | Ausgabe 2/2013

A single-mask dry-release process for fabrication of high aspect ratio SOI MEMS devices

ZhenChuan Yang, YuMin Wei, Xu Mao, GuiZhen Yan

01.02.2013 | Ausgabe 2/2013

Micromechanical characteristics of the asphalt mixture in bending condition

YaNan Cui, YongMing Xing, WenChen Ni

01.02.2013 | Ausgabe 2/2013

Flutter analyses of complete aircraft based on hybrid grids and parallel computing

GuanNan Zheng, GuoWei Yang, Wei Qian

01.02.2013 | Ausgabe 2/2013

The aeroelastic effects on the scatter phenomenon of wind-tunnel data

ZhengYin Ye, YueWen Jiang, NaiZhen Zhou, BaoFang Song, JiZhou He

01.02.2013 | Ausgabe 2/2013

Numerical investigation on flow and convective heat transfer of aviation kerosene at supercritical conditions

GuoXin Dang, FengQuan Zhong, LiHong Chen, XinYu Chang

01.02.2013 | Ausgabe 2/2013

Pendulum-like oscillation controller for micro aerial vehicle with ducted fan based on LQR and PSO

HaiBin Duan, ChangHao Sun

01.02.2013 | Ausgabe 2/2013

Propagation of plane wave in non-homogeneously saturated soils

FengXi Zhou, YuanMing Lai, RuiXia Song

01.02.2013 | Ausgabe 2/2013

An elastic-viscous-plastic model for overconsolidated clays

YangPing Yao, LingMing Kong, Jing Hu

01.02.2013 | Ausgabe 2/2013

An investigation on micro pore structures and the vapor pressure mechanism of explosive spalling of RPC exposed to high temperature

Yang Ju, HongBin Liu, KaiPei Tian, JinHui Liu, Li Wang, ZhiShun Ge

01.02.2013 | Ausgabe 2/2013

Liquid-level sensor based on tapered chirped fiber grating

XiaoWei Dong, WenKai Liu, RuiFeng Zhao

01.02.2013 | Ausgabe 2/2013

An orientation method and analysis of optical radiation sources based on polyhedron and parallel incident light

Jiang Wang

01.02.2013 | Ausgabe 2/2013

Large eddy simulation of a round jet into a counterflow

ZhiWei Li, WenXin Huai, ZhongDong Qian

01.02.2013 | Ausgabe 2/2013

Effect of seed electron injection on chorus-driven acceleration of radiation belt electrons

Qi Yan, LiQing Shi, SiQing Liu

01.02.2013 | Ausgabe 2/2013

Analysis on the influencing factors of mechanical characteristics of jointless turnout group in ballasted track of high-speed railway

Liang Gao, Cun Qu, ShenLu Qiao, XiaoPei Cai, Wei Liu

01.02.2013 | Ausgabe 2/2013

Parallel architecture and optimization for discrete-event simulation of spike neural networks

YuHua Tang, BaiDa Zhang, JunJie Wu, TianJiang Hu, Jing Zhou, FuDong Liu

01.02.2013 | Ausgabe 2/2013

Improved differential geometric guidance commands for endoatmospheric interception of high-speed targets

KeBo Li, Lei Chen, GuoJin Tang

01.02.2013 | Ausgabe 2/2013

Entransy dissipation, entransy-dissipation-based thermal resistance and optimization of one-stream hybrid thermal network

WenHua Wang, XueTao Cheng, XinGang Liang

Aktuelle Ausgaben

Premium Partner


    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.