Skip to main content
Erschienen in: Metallurgical and Materials Transactions B 3/2018

23.02.2018

Selective Extraction and Recovery of Nd and Dy from Nd-Fe-B Magnet Scrap by Utilizing Molten MgCl2

verfasst von: Sakae Shirayama, Toru H. Okabe

Erschienen in: Metallurgical and Materials Transactions B | Ausgabe 3/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Fundamental experiments are conducted with the aim of developing an efficient recycling process for rare earth elements (REEs) from neodymium-iron-boron (Nd-Fe-B) permanent magnet scrap. Molten magnesium dichloride (MgCl2) was chosen as an extraction medium, which can selectively chlorinate and extract REEs in magnet alloys. Dysprosium-containing Nd-Fe-B magnet alloy was immersed in molten MgCl2 at 1273 K (1000 °C) for 3 to 12 hours. The results of the experiments clearly show that the REEs in the magnetic alloy were successfully extracted into the molten salt, while the Fe-B alloy remained in a solid form. The extraction ratios of Nd and Dy were at most 87 and 78 mass pct, respectively. After the extraction experiment, excess MgCl2 and Mg were removed by vacuum distillation and the rare earth chlorides were recovered. Thus, the feasibility of this method for efficient recovery of rare earths using molten MgCl2 is demonstrated.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat M. Sagawa, S. Fujimura, H. Yamamoto, Y. Matsuura, and K. Hiraga: IEEE Trans. on Magnetics, 1984, vol. MAG-20, pp. 1584-1589.CrossRef M. Sagawa, S. Fujimura, H. Yamamoto, Y. Matsuura, and K. Hiraga: IEEE Trans. on Magnetics, 1984, vol. MAG-20, pp. 1584-1589.CrossRef
2.
Zurück zum Zitat M. Sagawa, M. Hamano, and M. Hirabayashi: ‘EIKYU-JISHAKU’, AGNE Gijutsu Center Inc., Tokyo, 2007. M. Sagawa, M. Hamano, and M. Hirabayashi: ‘EIKYU-JISHAKU’, AGNE Gijutsu Center Inc., Tokyo, 2007.
3.
Zurück zum Zitat S. Hirosawa, Y. Matsuura, H. Yamamoto, S. Fujimura, and M. Sagawa: J. Appl. Phys., 1986, vol. 59, pp.873-879.CrossRef S. Hirosawa, Y. Matsuura, H. Yamamoto, S. Fujimura, and M. Sagawa: J. Appl. Phys., 1986, vol. 59, pp.873-879.CrossRef
4.
Zurück zum Zitat K. Machida: Kinzoku, 2004, vol. 74, pp. 3-12. K. Machida: Kinzoku, 2004, vol. 74, pp. 3-12.
5.
Zurück zum Zitat T.H. Okabe: Kinzoku, 2007, vol. 77, pp. 10-16. T.H. Okabe: Kinzoku, 2007, vol. 77, pp. 10-16.
6.
Zurück zum Zitat S. Shirayama and T.H. Okabe: Molten Salts, 2009, vol. 52, pp.71-82. S. Shirayama and T.H. Okabe: Molten Salts, 2009, vol. 52, pp.71-82.
7.
Zurück zum Zitat O. Takeda and T.H. Okabe: Metallur. and Mater. Trans. E, 2014, vol. 1A, pp.160-173. O. Takeda and T.H. Okabe: Metallur. and Mater. Trans. E, 2014, vol. 1A, pp.160-173.
8.
Zurück zum Zitat Y. Yu, L.S. Chumbley, and F.C. Laabs: J. Mater. Res., 2000, vol. 15, pp. 2296-2304.CrossRef Y. Yu, L.S. Chumbley, and F.C. Laabs: J. Mater. Res., 2000, vol. 15, pp. 2296-2304.CrossRef
9.
Zurück zum Zitat T.H. Okabe, O. Takeda, K. Fukuda, and Y. Umetsu: Mater. Trans., 2003, vol. 44, pp. 798-801.CrossRef T.H. Okabe, O. Takeda, K. Fukuda, and Y. Umetsu: Mater. Trans., 2003, vol. 44, pp. 798-801.CrossRef
10.
Zurück zum Zitat O. Takeda, T.H. Okabe, and Y. Umetsu: J. Alloy. Compd., 2005, vol. 392, pp. 206-313.CrossRef O. Takeda, T.H. Okabe, and Y. Umetsu: J. Alloy. Compd., 2005, vol. 392, pp. 206-313.CrossRef
11.
Zurück zum Zitat O. Takeda, T.H. Okabe, and Y. Umetsu: J. Alloy. Compd., 2006, vol. 408-412, pp. 387-390.CrossRef O. Takeda, T.H. Okabe, and Y. Umetsu: J. Alloy. Compd., 2006, vol. 408-412, pp. 387-390.CrossRef
12.
Zurück zum Zitat O. Takeda, T.H. Okabe, and Y. Umetsu: J. Alloy. Compd., 2004, vol. 379, pp. 305-313.CrossRef O. Takeda, T.H. Okabe, and Y. Umetsu: J. Alloy. Compd., 2004, vol. 379, pp. 305-313.CrossRef
13.
Zurück zum Zitat K. Murase, K. Shinozaki, Y. Hirashima, K. Machida, and G. Adachi: J. Alloy. Compd., 1993, vol. 198, pp. 31-38.CrossRef K. Murase, K. Shinozaki, Y. Hirashima, K. Machida, and G. Adachi: J. Alloy. Compd., 1993, vol. 198, pp. 31-38.CrossRef
14.
Zurück zum Zitat K. Murase, K. Machida, and G. Adachi: J. Alloy. Compd., 1995, vol. 217, pp. 218-215.CrossRef K. Murase, K. Machida, and G. Adachi: J. Alloy. Compd., 1995, vol. 217, pp. 218-215.CrossRef
15.
Zurück zum Zitat J. Jiang, T. Ozaki, K. Machida, and G. Adachi: J. Alloy. Compd., 1997, vol. 260, pp. 222-235.CrossRef J. Jiang, T. Ozaki, K. Machida, and G. Adachi: J. Alloy. Compd., 1997, vol. 260, pp. 222-235.CrossRef
16.
Zurück zum Zitat T. Uda, K.T. Jacob, and M. Hirasawa: Science, 2000, vol. 289, pp. 2326-2329.CrossRef T. Uda, K.T. Jacob, and M. Hirasawa: Science, 2000, vol. 289, pp. 2326-2329.CrossRef
17.
Zurück zum Zitat T. Uda, S. Komarov, and M. Hirasawa: Mater. Trans., 2001, vol. 42, pp. 1813-1819.CrossRef T. Uda, S. Komarov, and M. Hirasawa: Mater. Trans., 2001, vol. 42, pp. 1813-1819.CrossRef
18.
Zurück zum Zitat T. Saito, H. Sato, S. Ozawa, J. Yu, and T. Motegi: J. Alloy. Compd., 2003, vol. 353, pp. 189-193.CrossRef T. Saito, H. Sato, S. Ozawa, J. Yu, and T. Motegi: J. Alloy. Compd., 2003, vol. 353, pp. 189-193.CrossRef
19.
Zurück zum Zitat T. Saito and T. Motegi: Scripta Materialia, 2004, vol. 51, pp. 1069-1073.CrossRef T. Saito and T. Motegi: Scripta Materialia, 2004, vol. 51, pp. 1069-1073.CrossRef
20.
Zurück zum Zitat T. Saito, H. Sato, and T. Motegi: J. Alloy. Compd., 2005, vol. 387, pp. 274-278.CrossRef T. Saito, H. Sato, and T. Motegi: J. Alloy. Compd., 2005, vol. 387, pp. 274-278.CrossRef
21.
Zurück zum Zitat T. Saito, H. Sato, T. Motegi, and K. Kobayashi: J. Alloy. Compd., 2005, vol. 403, pp. 341-344.CrossRef T. Saito, H. Sato, T. Motegi, and K. Kobayashi: J. Alloy. Compd., 2005, vol. 403, pp. 341-344.CrossRef
22.
Zurück zum Zitat H. Sekimoto, T. Kubo and K. Yamaguchi: J. MMIJ, 2014, vol. 130, pp. 494-500. (in Japanese).CrossRef H. Sekimoto, T. Kubo and K. Yamaguchi: J. MMIJ, 2014, vol. 130, pp. 494-500. (in Japanese).CrossRef
23.
Zurück zum Zitat T. Oishi, H. Konishi, T. Nohira, M. Tanaka and T. Usui: Kogaku Kagaku Ronbunshu, 2010, vol. 36, pp. 299-303. (in Japanese).CrossRef T. Oishi, H. Konishi, T. Nohira, M. Tanaka and T. Usui: Kogaku Kagaku Ronbunshu, 2010, vol. 36, pp. 299-303. (in Japanese).CrossRef
24.
Zurück zum Zitat T. Nohira, S. Kobayashi, K. Kobayashi, R. Hagiwara, T. Oishi, and H. Konishi: ECS Trans., 2010, vol. 33, pp. 205-212.CrossRef T. Nohira, S. Kobayashi, K. Kobayashi, R. Hagiwara, T. Oishi, and H. Konishi: ECS Trans., 2010, vol. 33, pp. 205-212.CrossRef
25.
Zurück zum Zitat S. Kobayashi, K. Kobayashi, T. Nohira, R. Hagiwara, T. Oishi, and H. Konishi: J. the Electrochem. Soc., 2011, vol. 158, pp. E142-E146.CrossRef S. Kobayashi, K. Kobayashi, T. Nohira, R. Hagiwara, T. Oishi, and H. Konishi: J. the Electrochem. Soc., 2011, vol. 158, pp. E142-E146.CrossRef
26.
Zurück zum Zitat M. Ito, K. Miura, and K. Machida: J. Alloy. Compd., 2009, vol. 477, pp. 484-487.CrossRef M. Ito, K. Miura, and K. Machida: J. Alloy. Compd., 2009, vol. 477, pp. 484-487.CrossRef
28.
Zurück zum Zitat S. Shirayama, and T.H. Okabe: Proc. MMIJ Annual Meeting. 2008. vol. II, pp. 69-70. S. Shirayama, and T.H. Okabe: Proc. MMIJ Annual Meeting. 2008. vol. II, pp. 69-70.
29.
Zurück zum Zitat T.H. Okabe, and S. Shirayama: Japanese patent No. 5424352 (2013 Dec 6) (PCT application: PCT/JP2009/056079 (2009 Mar 26)). T.H. Okabe, and S. Shirayama: Japanese patent No. 5424352 (2013 Dec 6) (PCT application: PCT/JP2009/056079 (2009 Mar 26)).
30.
Zurück zum Zitat I. Barin: Thermochemical Data of Pure Substances, 3rd ed., VCH Verlagsgesellschaft mbH, Weinheim, 1995.CrossRef I. Barin: Thermochemical Data of Pure Substances, 3rd ed., VCH Verlagsgesellschaft mbH, Weinheim, 1995.CrossRef
31.
Zurück zum Zitat T. Uda, T.H. Okabe, Y. Waseda, and K.T. Jacob: J. Alloys Compd., 1999, vol. 284, pp. 282-288.CrossRef T. Uda, T.H. Okabe, Y. Waseda, and K.T. Jacob: J. Alloys Compd., 1999, vol. 284, pp. 282-288.CrossRef
32.
Zurück zum Zitat A. Roine: HSC Chemistry ®, ver 6.0, Outokumpu Research Oy, Pori, Finland, 2006. A. Roine: HSC Chemistry ®, ver 6.0, Outokumpu Research Oy, Pori, Finland, 2006.
33.
Zurück zum Zitat T. Uda, K.T. Jacob, and M. Hirasawa: Science, 2000, vol. 289, pp. 2326-2329.CrossRef T. Uda, K.T. Jacob, and M. Hirasawa: Science, 2000, vol. 289, pp. 2326-2329.CrossRef
Metadaten
Titel
Selective Extraction and Recovery of Nd and Dy from Nd-Fe-B Magnet Scrap by Utilizing Molten MgCl2
verfasst von
Sakae Shirayama
Toru H. Okabe
Publikationsdatum
23.02.2018
Verlag
Springer US
Erschienen in
Metallurgical and Materials Transactions B / Ausgabe 3/2018
Print ISSN: 1073-5615
Elektronische ISSN: 1543-1916
DOI
https://doi.org/10.1007/s11663-018-1176-0

Weitere Artikel der Ausgabe 3/2018

Metallurgical and Materials Transactions B 3/2018 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.