Weitere Artikel dieser Ausgabe durch Wischen aufrufen
Translated from Problemy Prochnosti, No. 1, pp. 82 – 87, January – February, 2015.
For studying the vibration characteristics of a laminar composite rotating blade, the spin softening effect calculated by the finite element method (FEM) was incorporated with the prestress effect to analyze shaking, swing, torsion, and coupled vibrations. The mathematical formula was derived. The study shows that the centrifugal force exerts influence on the difference in vibration frequencies. The laminar composite can reduce an influence of the spin softening on the first swing vibration frequency because of its structure and smaller density. With the variation of rotating velocity, the blade spin softening can lead to the coupled first shaking and first swing vibrations. In the coupled vibrations, swing is contained in the shaking mode and shaking is also contained in the swing one, which is the reason of major blade damages. The results confirm the complexity of the dynamic characteristics of the laminar composite rotating blade. This method is also well applicable to the dynamic design of such blades.
Bitte loggen Sie sich ein, um Zugang zu diesem Inhalt zu erhalten
Sie möchten Zugang zu diesem Inhalt erhalten? Dann informieren Sie sich jetzt über unsere Produkte:
S. M. Qatu, R. W. Sullivan, and W. C. Wang, “Recent research advances on the dynamic analysis of composite shells: 2000–2009,” Compos. Struct., 93, No. 1, 14–31 (2010). CrossRef
M. K. Singha and R. Daripa, “Nonlinear vibration of symmetrically laminated composite skew plates by finite element method,” Int. J. Non-Linear Mech., 42, No. 9, 1144–1152 (2007). CrossRef
M. K. Singha and M. Ganapathi, “Large amplitude free flexural vibrations of laminated composite skew plates,” Int. J. Non-Linear Mech., 39, No. 10, 1709–1720 (2004). CrossRef
P. J. Murtagh, B. Basu, and B. M. Broderick, “Mode acceleration approach for rotating wind turbine blades,” Proc. Inst. Mech. Eng., Part K, J. Multi-Body Dynamics, 218, No. 3, 159–167 (2004).
C. L. Zhang, Z. M. Huang, and G. H. Dong, “Finite element ultimate analysis and design of composite wind turbine blade based on non-linear constitutive relationship,” Acta Mater. Compos. Sinica, 24, No. 2, 174–182 (2007).
J. G. Lu, J. D. Wang, and D. R. Chen, “Transverse vibration of the blade for unmanned micro helicopter using Rayleigh–Ritz method,” J. Univ. Sci. Technol. Beijing, 10, No. 6, 40–43 (2003).
X. S. Yao, “Study on dynamics of wind turbine blade based on spin softening,” J. Chin. Soc. Power Eng., 31, No. 3, 209–213 (2011).
Y. Narita and J. M. Hodgkinson, “Layerwise optimization for maximising the fundamental frequencies of point-supported rectangular laminated composite plates,” Compos. Struct., 69, No. 2, 127–135 (2005). CrossRef
D. Y. Liu and Q. J. Meng, “Blade vibration characteristics calculation by using 3D incompatible finite element,” Power Eng., 19, No. 4, 293–296 (1999).
O. I. Crabtree, S. D. Mesarovic, R. F. Richards, et al., “Nonlinear vibrations of a pre-stressed laminated thin plate,” Mech. Sci., 48, No. 4, 451–459 (2006). CrossRef
V. I. Gulyaev and S. N. Khudolii, “Vibrations of curved and twisted blades during complex rotation,” Int. Appl. Mech., 41, No. 4, 449–454 (2005). CrossRef
V. I. Gulyaev, P. Z. Lugovoi, and I. L. Solov’ev, “Elastic vibrations of a single- support thin-walled rotor (compound shell) during complex rotation,” Int. Appl. Mech., 39, No. 8, 969–975 (2003). CrossRef
Z. L. Xu, X. Y. Li, J. P. Park, and S. J. Ryu, “Effect of Coriolis acceleration on dynamic characteristics of high speed spinning steam turbine blades,” J. Xian Jiaotong Univ., 37, No. 9, 894–897 (2003).
J. W. Xu, R. Tian, Z. Y. Gao, et al., “Study on structure’s dynamic characteristic of the horizontal axis wind turbine,” Acta Energy Solar Sinica, 28, No. 8, 834–838 (2007).
N. S. Bao, R. J. Cao, and Z. Q. Ye, “Structural vibration analysis for wind turbine blades using finite element method,” Acta Energy Solar Sinica, 21, No. 1, 77–81 (2000).
- Shaking-Swing Coupled Vibration Analysis of a Laminar Composite Rotating Blade by the Finite Element Method
X. S. Yao
C. L. Zheng
- Springer US
in-adhesives, MKVS, Hellmich GmbH/© Hellmich GmbH, Neuer Inhalt/© momius | stock.adobe.com