Weitere Kapitel dieses Buchs durch Wischen aufrufen
Nowadays, indexable drills are the most commonly used drills for short hole-making operations because of their high performance and economic usage. Although there is much advancement in the indexable drill designs, they make high-pitched noise during the drilling operation which is unpleasant, cause poor surface finish, and may damage the tool too. Regenerative chatter vibrations are the main cause for this high-pitched noise, and a study conducted showed that the coupling between the axial and angular deflections in these drills causes the chatter. Thus, a numerical simulation model of the chatter occurring in these kinds of drills is done by considering torsional–axial vibrations. The model is used to predict the dominant frequency of the drill in which it is working, deflections of the drills under vibrations, and the variation in the forces because of these vibrations. Finally, the spectrum obtained from the noise generated, during the drilling operation, is compared with the spectrum obtained from the simulation, which shows that the numerical simulation is giving the agreeable results.
Bitte loggen Sie sich ein, um Zugang zu diesem Inhalt zu erhalten
Sie möchten Zugang zu diesem Inhalt erhalten? Dann informieren Sie sich jetzt über unsere Produkte:
MATLAB is used for Simulation.
Altintas, Y.: Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations. Cambridge University Press (2000). ISBN 0-521-65973-6
Parsian, A., Magnevall, M., Beno, T., Eynian, M.: Sound analysis in drilling, frequency and time domains. In: 16th CIRP Conference on Modelling of Machining Operations, vol. 58, pp. 411–415 (2017) CrossRef
Roukema, Jochem C., Altintas, Yusuf: Time-domain simulation of torsional-axial vibrations in drilling. Int. J. Mach. Tools Manuf. 46, 2073–2085 (2006) CrossRef
Kilic, Z.M.: Generalized Modelling of Flexible Machining System with arbitrary tool geometry. M.S., Middle East Technical University (2015)
Parsian, A., Magnevall, M., Beno, T., Eynian, M.: Time-domain modeling of torsional-axial chatter vibrations in indexable drills with low damping. In: The 4th International Conference on Virtual Machining Process Technology, Vancouver, Canada (2015)
Parsian, A., Magnevall, M., Eynian, M., Beno, T.: Time domain simulation of chatter vibrations in indexable drills. Int. J. Adv. Manuf. Technol. 89, 1209–1221 (2017) CrossRef
- Simulation of Torsional–Axial Chatter Vibrations in Indexable Drilling for Noise Generated
B. S. Suresh
- Springer Singapore
- Chapter 12
Neuer Inhalt/© ITandMEDIA