nach oben

Erschienen in:

2025 | OriginalPaper | Buchkapitel

13. Single-Minute Exchange of Die (SMED)

verfasst von : Omar Celis-Gracia, Jorge Luis García Alcaraz, Francisco Javier Estrada-Orantes, Fabiola Hermosillo Villalobos

Erschienen in: Lean Manufacturing in Latin America

Verlag: Springer Nature Switzerland

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This chapter analyzes the Single Minute Exchange of Die (SMED) lean manufacturing tool, delving into its concept, development, relevance, and the benefits it offers when well implemented. It also addresses the obstacles faced during its implementation. Moreover, it is crucial to consider specific fundamental measures throughout the implementation phase. Moreover, a bibliometric study is conducted to examine the prevalence of the SMED concept in the industry. This research specifically focuses on identifying the authors, institutions, and countries that contribute the most scholarly works or are most frequently cited. In conclusion, a case study demonstrates how the use of SMED can improve the company's capacity to manufacture items within the designated timeframe, leading to increased adaptability, reduced expenses, and enhanced product quality. The findings demonstrate that adopting the SMED methodology substantially increased the On-Time Delivery (OTD) metric, escalating from 91 to 98%. Furthermore, there was an approximate 55.55% decrease in the changeover durations. The company's problem was successfully handled by running a two-sample test using the SMED approach.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Total Productive Maintenance (TPM)

Nächstes Kapitel OEE Factors Influencing Line Production

Abdelhalim H, Berber A, Lodi M, Jain R, Nair AS, Pappu A, Patel K, Venkat V, Venkatesan C, Wable R, Dinatale M, Fu A, Iyer V, Kalove I, Kleyman M, Koutsoutis J, Menna D, Paliwal M, Patel N, Ahmed Z (2022) Artificial intelligence, healthcare, clinical genomics, and pharmacogenomics approaches in precision medicine. Front Genet. https://doi.org/10.3389/fgene.2022.929736CrossRef

Afonso M, Gabriel AT, Godina R (2022) Proposal of an innovative ergonomic SMED model in an automotive steel springs industrial unit. Adv Ind Manuf Eng 4:100075

Agreda FUP, Castrillón JH (2017) Aplicación de la técnica smed en el procedimiento de cambio de tintas de la referencia bolsa kraff colanta entera 3c a bolsa kraff amtex tannus 2c. Public Investig 11(1):113–124CrossRef

Agung D, Hasbullah H (2019) Reducing the product changeover time using SMED and 5S methods in the injection molding industry. Sinergi. https://doi.org/10.22441/sinergi.2019.3.004

Almomani MA, Aladeemy M, Abdelhadi A, Mumani A (2013) A proposed approach for setup time reduction through integrating conventional SMED method with multiple criteria decision-making techniques. Comput Ind Eng 66(2):461–469CrossRef

Arief RK, Nurlaila Q, Armila A (2018) Comparative study of conventional and quick die change stamping process: the issue of setup time and storage. Int J Eng Mater Manuf. https://doi.org/10.26776/ijemm.03.04.2018.06

Azizi A (2015) Designing a future value stream mapping to reduce lead time using SMED-A case study. Proc Manuf 2:153–158

Bednarek M (2013) Lean manufacturing—results of selected implementation projects. J Intercult Manage. https://doi.org/10.2478/joim-2013-0024CrossRef

bin Che Ani MN, Bin Shafei MSS (2014) The effectiveness of the single minute exchange of die (SMED) technique for the productivity improvement. Appl Mech Mater465:1144–1148

Braglia M, Frosolini M, Gallo M (2016) SMED enhanced with 5-whys analysis to improve set-upreduction programs: The SWAN approach. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-016-9477-4CrossRef

Cakmakci M (2009) Process improvement: performance analysis of the setup time reduction-SMED in the automobile industry. Int J Adv Manuf Technol 41:168–179CrossRef

Carrizo Moreira A, Campos Silva Pais G (2011) Single minute exchange of die: a case study implementation. J Technol Manage Innov6(1):129–146

Chiarini A (2014) Sustainable manufacturing-greening processes using specific Lean Production tools: an empirical observation from European motorcycle component manufacturers. J Clean Prod 85:226–233CrossRef

Cusumano MA, Takeishi A (1991) Supplier relations and management: a survey of Japanese, Japanese‐transplant, and US auto plants. Strateg Manag J 12(8):563–588. https://doi.org/10.1002/smj.4250120802

Danese P, Romano P, Bortolotti T (2012) JIT production, JIT supply and performance: investigating the moderating effects. Ind Manag Data Sys 112(3):441–465. https://doi.org/10.1108/02635571211210068

Da Silva IB, Godinho Filho M (2019) Single-minute exchange of die (SMED): a state-of-the-art literature review. Int J Adv Manuf Technol 102:4289–4307CrossRef

Das B, Venkatadri U, Pandey P (2014) Applying lean manufacturing system to improving productivity of airconditioning coil manufacturing. Int J Adv Manuf Technol 71:307–323CrossRef

Desai MS, Warkhedkar RM (2011) Productivity enhancement by reducing adjustment time and setup change. Int J Mech Ind Eng. https://doi.org/10.47893/ijmie.2011.1009

Díaz-Reza JR, García-Alcaraz JL, Martínez-Loya V, Blanco-Fernández J, Jiménez-Macías E, Avelar-Sosa L (2016) The effect of SMED on benefits gained in maquiladora industry. Sustainability 8(12):1237CrossRef

Díaz-Reza JR, García-Alcaraz JL, Mendoza-Fong JR, Martínez-Loya V, Macías EJ, Blanco-Fernández J (2017) Interrelations among SMED stages: a causal model. Complexity 2017

Ebrahimi A, Khakpour R, Saghiri S (2021) Sustainable setup stream mapping (3SM): a systematic approach to lean sustainable manufacturing. Prod Plan Control. https://doi.org/10.1080/09537287.2021.1916637CrossRef

Ferradás PG, Salonitis K (2013) Improving changeover time: a tailored SMED approach for welding cells. Proc CIRP 7:598–603CrossRef

García MÁG, Angulo PS, de Benito Martín JJ, Melero JG (2012) Definición de una metodología para una aplicación práctica del SMED. Técnica Industrial 298:46–54

Godina R, Pimentel C, Silva FJG, Matias JCO (2018) A structural literature review of the single minute exchange of die: the latest trends. Proc Manuf 17:783–790

Guzel D, Asiabi AS (2020) Improvement setup time by using SMED and 5S (An application in SME). Int J Sci Technol Res 9(1):3727–3732

Hasabe A, Hakde A, Khandagle A, Surve K (2019) Single minute exchange of dies (SMED) concept. Int Res J Eng Technol 6(04):4665–4669

Horzela A, Semrau J (2021) Using tools to improve logistics and production processes in a selected construction company. Eur Res Stud J. https://doi.org/10.35808/ersj/2100

Indrawati S, Pratiwi ME (2018) The effectiveness of single minute exchange of dies for lean changeover process in printing industry. MATEC Web Conf 154:01064CrossRef

Jena J, Sidharth S, Thakur LS, Pathak DK, Pandey V (2017) Total interpretive structural modeling (TISM): approach and application. J Adv Manage Res. https://doi.org/10.1108/jamr-10-2016-0087CrossRef

Joshi RR, Naik GR (2012) Reduction in setup time by SMED a literature review. Int J Modern Eng Res (IJMER) 2(1):442–444

Júnior RDL, Nunes AO, Costa LBM, Silva DAL (2018) Creating value with less impact: lean, green and eco-efficiency in a metalworking industry towards a cleaner production. J Clean Prod 196:517–534CrossRef

Junior RGP, Inácio RH, da Silva IB, Hassui A, Barbosa GF (2022) A novel framework for single-minute exchange of die (SMED) assisted by lean tools. Int J Adv Manuf Technol 119(9–10):6469–6487CrossRef

López DYO, Mateus TAV, Castiblanco AMO (2021) Aplicación del SMED en la industria: Revisión sistemática de la literatura a través de VOSviewer. Respuestas26(1):270–280

Lozano J, Saenz-Díez JC, Martínez E, Jiménez E, Blanco J (2017) Methodology to improve machine changeover performance on food industry based on SMED. Int J Adv Manuf Technol 90:3607–3618CrossRef

McIntosh RI, Culley SJ, Mileham AR, Owen GW (2000) A critical evaluation of Shingo’s’ SMED’(Single Minute Exchange of Die) methodology. Int J Prod Res 38(11):2377–2395CrossRef

McIntosh R, Owen G, Culley S, Mileham T (2007) Changeover improvement: reinterpreting Shingo’s “SMED” methodology. IEEE Trans Eng Manage 54(1):98–111CrossRef

Monzon Sauñe C (2016) Aplicación del Smed en el proceso de llenado de paquetes para incrementar la productividad de la línea de galletas rellenas en una empresa de consumo masivo, Lima, 2016.

Moreira AC, Pais GCS (2011) Single minute exchange of die: a case study implementation. J Technol Manag Innov. https://doi.org/10.4067/s0718-27242011000100011CrossRef

Nallusamy S, Saravanan V (2016) Lean tools execution in a small scale manufacturing industry for productivity improvement-A case study. Indian J Sci Technol 9(35):1–7CrossRef

Nikolić J, Dašić M, Đapan M (2023) Smed as an indispensable part of lean manufacturing in the small and medium enterprises. Int J Quality Res 17(1)

Ondra P (2022) The impact of single minute exchange of die and total productive maintenance on overall equipment effectiveness. J Competitiveness. https://doi.org/10.7441/joc.2022.03.07CrossRef

Ospina DY, Mateus TAV, Castiblanco AMO (2021) Aplicación del SMED en la industria: Revisión sistemática de la literatura a través de VOSviewer. Respuestas 26(1):7

Pheng LS, Min W (2005) Just‐in‐time management in the ready mixed concrete industries of Chongqing, China and Singapore. Constr Manag Econ 23(8):815–829. https://doi.org/10.1080/01446190500040638

Pyreddy VR, Kim SL, Banerjee AVIJIT (1996) Optimal investment in setup reduction for finite horizon periodic review inventory system under deterministic time varying demand. Prod Plann Control 7(5):482–491. https://doi.org/10.1080/09537289608930377

Ribeiro MAS, Santos ACO, Amorim G da F de, Oliveira CHd, Braga RAdaS, Netto RS (2022) Analysis of the implementation of the single minute exchange of die methodology in an agroindustry through action research. Machines. https://doi.org/10.3390/machines10050287

Ribeiro MAS, Santos ACO, de Amorim G da F, de Oliveira CH, da Silva Braga RA, Netto RS (2022) Analysis of the implementation of the single minute exchange of die methodology in an agroindustry through action research. Machines 10(5):287

Sherali HD, Van Goubergen D, Van Landeghem H (2008) A quantitative approach for scheduling activities to reduce set-up in multiple machine lines. Eur J Oper Res 187(3):1224–1237. https://doi.org/10.1016/j.ejor.2006.06.068

Shingo S (1985) A revolution in manufacturing: the SMED system (1st Edition). Routledge. https://doi.org/10.4324/9781315136479

Silva ÍBd, Filho MG (2019) Single-minute exchange of die (SMED): a state-of-the-art literature review. Int J Adv Manuf Technolhttps://doi.org/10.1007/s00170-019-03484-w

Strickland BR (1997) Quick changeover for operators: the SMED system. J Manuf Syst. https://doi.org/10.1016/s0278-6125(97)88894-2CrossRef

Suki NSA, Bakar EA, Ansari E, Akhtar MN (2020) Single minute exchange die approach for optimising setup time in labelling printing company. J Eng Sci. https://doi.org/10.21315/jes2020.16.2.2

Sundar R, Balaji AN, Kumar RMS (2014) A review on lean manufacturing implementation techniques. Proc Eng 97:1875–1885CrossRef

Tapasco FCA, Zúñiga JA, Romero HF (2023) Propuesta para la reducción de los tiempos de alistamiento en el proceso de inyección EVA en una empresa del sector calzado mediante la implementación de la metodología SMED. INVENTUM 18(35):14–28CrossRef

Teixeira P, Sá JC, Silva FJG, Ferreira LP, Santos G, Fontoura P (2021) Connecting lean and green with sustainability towards a conceptual model. J Clean Prod 322:129047CrossRef

Tekin M, Arslandere M, Etlioğlu M, Koyuncuoğlu Ö, Tekin E (2019) An application of SMED and Jidoka in lean production. Proc Int Symp Prod Res 2018(18):530–545. https://doi.org/10.1007/978-3-319-92267-6_45CrossRef

Trovinger SC, Bohn RE (2009) Setup time reduction for electronics assembly: combining simple (SMED) and IT-based methods. Prod Oper Manag. https://doi.org/10.1111/j.1937-5956.2005.tb00019.xCrossRef

Ulutas B (2011) An APPLICATION of SMED methodology. Int J Ind Manuf Eng 5(7):1194–1197

Zhang D, Chen S, Xu Y (2022). Study on the improvement of single minute exchange of die based on lean production. https://doi.org/10.1117/12.2645572CrossRef

Titel: Single-Minute Exchange of Die (SMED)
verfasst von: Omar Celis-Gracia
Jorge Luis García Alcaraz
Francisco Javier Estrada-Orantes
Fabiola Hermosillo Villalobos
Verlag: Springer Nature Switzerland
Buch: Lean Manufacturing in Latin America
Print ISBN: 978-3-031-70983-8

Electronic ISBN: 978-3-031-70984-5

Copyright-Jahr: 2025
DOI: https://doi.org/10.1007/978-3-031-70984-5_13

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht