nach oben

International Journal of Material Forming

Erschienen in:

29.12.2017 | Review

Single point incremental forming: state-of-the-art and prospects

verfasst von: Joost R. Duflou, Anne-Marie Habraken, Jian Cao, Rajiv Malhotra, Markus Bambach, Dave Adams, Hans Vanhove, Amirahmad Mohammadi, Jack Jeswiet

Erschienen in: International Journal of Material Forming | Ausgabe 6/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Incremental sheet metal forming in general and Single Point Incremental Forming (SPIF) specifically have gone through a period of intensive development with growing attention from research institutes worldwide. The result of these efforts is significant progress in the understanding of the underlying forming mechanisms and opportunities as well as limitations associated with this category of flexible forming processes. Furthermore, creative process design efforts have enhanced the process capabilities and process planning methods. Also, simulation capabilities have evolved substantially. This review paper aims to provide an overview of the body of knowledge with respect to Single Point Incremental Forming. Without claiming to be exhaustive, each section aims for an up-to-date state-of-the-art review with corresponding conclusions on scientific progress and outlook on expected further developments.

Nächster Artikel Local strain measurements of yarns inside of 3D warp interlock fabric during forming process

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Jeswiet J, Micari F, Hirt G, Bramley A, Duflou J, Allwood J (2005) Asymmetric single point incremental forming of sheet metal. CIRP Ann Manuf Technol 54(2):88–114. https://doi.org/10.1016/S0007-8506(07)60021-3 CrossRef

Adams D, Jeswiet J (2014) Design rules and applications of single-point incremental forming. Proc Inst Mech Eng B J Eng Manuf 229(5):754–760CrossRef

Leszak E (1967) Apparatus and process for incremental dieless forming. Patent US3342051A1, published 1967–09-19

Reddy NV, Lingam R, Cao J (2015) Incremental metal forming process in manufacturing in handbook of manufacturing engineering and technology. Springer-Verlag, London

Aerens R, Eyckens P, Van Bael A, Duflou JR (2010) Force prediction for single point incremental forming deduced from experimental and FEM observations. Int J Adv Manuf Technol 46(9–12):969–982. https://doi.org/10.1007/s00170-009-2160-2 CrossRef

Marabuto SR, Afonso D, Ferreira JAF, Melo FQ, Martins MABE, de Sousa RJA (2011) Finding the best machine for SPIF operations - a brief discussion. Key Eng Mater 473:861–868. https://doi.org/10.4028/www.scientific.net/KEM.473.861 CrossRef

Ambrogio G, Gagliardi F, Filice L (2013) On the high-speed single point incremental forming of titanium alloys. CIRP Ann 62(1):243–246. https://doi.org/10.1016/j.cirp.2013.03.053 CrossRef

Vanhove H, Mohammadi A, Guo Y, Duflou JR (2014) High-speed single point incremental forming of an automotive aluminium alloy. Key Eng Mater 622-623:433–439. https://doi.org/10.4028/www.scientific.net/KEM.622-623.433 CrossRef

Pereira Bastos RN, Alves de Sousa RJ, Fernandes Ferreira JA (2015) Enhancing time efficiency on single point incremental forming processes. Int J Mater Form 9(5):653–662. https://doi.org/10.1007/s12289-015-1251-x CrossRef

10.

Meier H, Dewald O, Zhang J (2005) Development of a robot-based sheet metal forming process. Steel Res Int 76(2–3):167–170. https://doi.org/10.1002/srin.200505990 CrossRef

11.

Verbert J, Aerens R, Vanhove H, Aertbeliën E, Duflou J (2009) Obtainable accuracies and compensation strategies for robot supported SPIF. Key Eng Mater 410–411:679–687CrossRef

12.

Alves de Sousa RJ, Ferreira JAF, Sá de Farias JB, Torrão JND, Afonso DG, Martins MABE (2014) SPIF-A: on the development of a new concept of incremental forming machine. Struct Eng Mech 49(5):645–660. 10.12989/sem.2014.49.5.645 CrossRef

13.

Johnson CF, Kiridena VS, Ren F, Xia ZC (2012) System and method for incrementally forming a workpiece, US Patent US8322176

14.

Meier H, Buff B, Laurischka t R, Smukala V (2009) Increasing the part accuracy in dieless robot-based incremental sheet metal forming. CIRP Ann Manuf Technol 58(1):233–238CrossRef

15.

Paniti I (2014) A novel, single-robot based two sided incremental sheet forming system, ISR/ROBOTIK. 41st International Symposium on Robotics, Proceedings of VDE

16.

Ziran X, Gao L, Hussain G, Cui Z (2010) The performance of flat end and hemispherical end tools in single-point incremental forming. Int J Adv Manuf Technol 46(9-12):1113–1118. https://doi.org/10.1007/s00170-009-2179-4 CrossRef

17.

Bhattacharya A, Maneesh K, Venkata Reddy N, Cao J (2011) Formability and surface finish studies in single point incremental forming. J Manuf Sci Eng 133:6 061020CrossRef

18.

Eyckens P, Van Bael A, Aerens R, Duflou J, Van Houtte P (2008) Small-scale finite element modelling of the plastic deformation zone in the incremental forming process. Int J Mater Form 1:1159CrossRef

19.

Lu B, Fang Y, Xu DK, Chen J, Ou H, Moser NH, Cao J (2014) Mechanism investigation of friction-related effects in single point incremental forming using a developed oblique roller-ball tool. Int J Mach Tools Manuf 85:14–29. https://doi.org/10.1016/j.ijmachtools.2014.04.007 CrossRef

20.

Azevedo NG, Farias JS, Bastos RP, Teixeira P, Davim JP, De Sousa RJA (2015) Lubrication aspects during single point incremental forming for steel and aluminum materials. Int J Precis Eng Manuf 16:589. https://doi.org/10.1007/s12541-015-0079-0 CrossRef

21.

Hussain G, Gao L, Hayat N, Cui Z, Pang YC, Dar NU (2008) Tool and lubrication for negative incremental forming of a commercially pure titanium sheet. Int J Mater Prod Technol 203(1–3):193–201. https://doi.org/10.1016/j.jmatprotec.2007.10.043 CrossRef

22.

Duflou JR, Callebaut B, Verbert J, De Baerdemaeker H (2007) Laser assisted incremental forming: formability and accuracy improvement. CIRP Ann Manuf Technol 56(1):273–276. https://doi.org/10.1016/j.cirp.2007.05.063 CrossRef

23.

Bouffioux C, Henrard C, Gu J, Duflou J, Habraken A (2007) Development of an inverse method for identification of materials parameters in the single point incremental sheet forming process. Proc. of the IDDRG 2007 International Conference

24.

Emmens WC, Sebastiani G, van den Boogaard AH (2010) The technology of incremental sheet forming - a brief review of the history. J Mater Process Technol 210(8):981–997. https://doi.org/10.1016/j.jmatprotec.2010.02.014 CrossRef

25.

Filice L, Fratini L, Micari F (2002) Analysis of material formability in incremental forming. CIRP Annals-Manufacturing Technology 51(1):199–202. https://doi.org/10.1016/S0007-8506(07)61499-1 CrossRef

26.

Emmens WC, van den Boogaard AH (2009) An overview of stabilizing deformation mechanisms in incremental sheet forming. J Mater Process Technol 209(8):3688–3695. https://doi.org/10.1016/j.jmatprotec.2008.10.003 CrossRef

27.

Jackson K, Allwood JM (2009) The mechanics of incremental sheet forming. J Mater Process Technol 209(3):1158–1174. https://doi.org/10.1016/j.jmatprotec.2008.03.025 CrossRef

28.

Malhotra R, Xue L, Belytschko T, Cao J (2012) Mechanics of fracture in single point incremental forming. J Mater Process Technol 212(7):1573–1590. https://doi.org/10.1016/j.jmatprotec.2012.02.021 CrossRef

29.

Silva MB, Nielsen PS, Bay N, Martins PAF (2011) Failure mechanisms in single-point incremental forming of metals. Int J Adv Manuf Technol 56(9–12):893–903. https://doi.org/10.1007/s00170-011-3254-1 CrossRef

30.

Eyckens P, He S, Van Bael A, Van Houtte P, Duflou J (2007) Forming limit predictions for the serrated strain paths in single point incremental sheet forming. AIP Conference Proceedings, Aip 908:141–146CrossRef

31.

Silva MB, Skjoedt M, Bay N, Martins PAF (2009) Revisiting single-point incremental forming and formability/failure diagrams by means of finite elements and experimentation. J Strain Anal Eng Des 44(4):221–234. https://doi.org/10.1243/03093247JSA522 CrossRef

32.

Hussain G, Gao L, Hayat N, Ziran X (2009) A new formability indicator in single point incremental forming. J Mater Process Technol 209(9):4237–4242. https://doi.org/10.1016/j.jmatprotec.2008.11.024 CrossRef

33.

Allwood J, Shouler D, Tekkaya A (2007) The increased forming limits of incremental sheet forming processes. Key Eng Mater 344:621–628. https://doi.org/10.4028/www.scientific.net/KEM.344.621 CrossRef

34.

Hirt G, Ames J, Bambach M, Kopp R (2004) Forming strategies and process modelling for CNC incremental sheet forming. CIRP Ann Manuf Technol 53(1):203–206. https://doi.org/10.1016/S0007-8506(07)60679-9 CrossRef

35.

Martins PAF, Bay N, Skjoedt M, Silva MB (2008) Theory of single point incremental forming. CIRP Ann Manuf Technol 57(1):247–252. https://doi.org/10.1016/j.cirp.2008.03.047 CrossRef

36.

Smith J, Malhotra R, Liu WK, Cao J (2013) Deformation mechanics in single-point and accumulative double-sided incremental forming. Int J Adv Manuf Technol 69(5–8):1185–1201. https://doi.org/10.1007/s00170-013-5053-3 CrossRef

37.

Montanari L, Cristino VA, Silva MB, Martins PAF (2013) A new approach for deformation history of material elements in hole-flanging produced by single point incremental forming. Int J Adv Manuf Technol 69(5–8):1175–1183. https://doi.org/10.1007/s00170-013-5117-4 CrossRef

38.

Silva MB, Skjoedt M, Atkins AG, Bay N, Martins PAF (2008) Single-point incremental forming and formability-failure diagrams. J Strain Anal Eng Des 43(1):15–35. https://doi.org/10.1243/03093247JSA340 CrossRef

39.

Behera AK, Lauwers B, Duflou J (2013) Tool path generation for single point incremental forming using intelligent sequencing and multi-step mesh morphing techniques. Key Eng Mater 554–557:1408–1418CrossRef

40.

Behera AK, Verbert J, Lauwers B, Duflou JR (2013) Tool path compensation strategies for single point incremental sheet forming using multivariate adaptive regression splines. Comput Des 45(3):575–590

41.

Beltran M, Malhotra R, Nelson AJ, Bhattacharya A, Reddy NV, Cao J (2013) Experimental study of failure modes and scaling effects in micro-incremental forming. ASME Journal of Micro- and Nano-Manufacturing 3:031005–031001CrossRef

42.

Sekine T, Obikawa T (2010) Single point micro incremental forming of miniature Shell structures. Journal of Advanced Mechanical Design, Systems, and Manufacturing 4(2):543–557. https://doi.org/10.1299/jamdsm.4.543 CrossRef

43.

Donachie MJ (2000) Titanium: a technical guide, ASM International

44.

Avedesian MM, Baker H (1999) ASM specialty handbook: magnesium and magnesium alloys (ASM international)

45.

Shi X, Gao L, Khalatbari H, Xu Y, Wang H, Jin L. (2013) Electric hot incremental forming of lowcarbon steel sheet: accuracy improvement. Int J Adv Manuf Technol 68(1–4):241–247CrossRef

46.

Welsch G, Boyer R, Collings EW (1993) Materials properties handbook: Titanium Alloys. ASMInternational, Materials Park, OH

47.

Kim SW, Lee YS, Kang SH, Lee JH (2007) Incremental forming of mg alloy sheet at elevated temperatures. J Mech Sci Technol 21(10):1518–1522. https://doi.org/10.1007/BF03177368 CrossRef

48.

Palumbo G, Brandizzi M (2012) Experimental investigations on the single point incremental forming of a titanium alloy component combining static heating with high tool rotation speed. Mater Des 40(0):43–51CrossRef

49.

Duflou J, Callebaut B, Verbert J, De Baerdemaeker H (2008) Improved SPIF performance through dynamic local heating. Int J Mach Tools Manuf 48(5):543–549. https://doi.org/10.1016/j.ijmachtools.2007.08.010 CrossRef

50.

Mohammadi A, Vanhove H, Van Bael A, Duflou JR (2016) Towards accuracy improvement in single point incremental forming of shallow parts formed under laser assisted conditions. Int J Mater Form 9(3):339–351. https://doi.org/10.1007/s12289-014-1203-x ISSN 1960-6206CrossRef

51.

Mohammadi A, Vanhove H, Van Bael A, Seefeldt M, Duflou JR (2016) Effect of laser transformation hardening on the accuracy of SPIF formed parts. Journal of Manufacturing Science and Engineering (ASME) 139(1):011007–011007-12. https://doi.org/10.1115/1.4033926 CrossRef

52.

Göttmann A, Diettrich J, Bergweiler G, Bambach M, Hirt G, Loosen P, Poprawe R (2011) Laser-assisted asymmetric incremental sheet forming of titanium sheet metal parts. Prod Eng Res Devel 5(3):263–271. https://doi.org/10.1007/s11740-011-0299-9 CrossRef

53.

Ghiotti A, Bruschi S (2010) A novel experimental set-up for warm incremental forming of AZ31B magnesium alloy sheets. Steel Res Int 81:950–954

54.

Fan G, Gao L, Hussain G, Wu Z (2008) Electric hot incremental forming: a novel technique. Int J Mach Tools Manuf 48(15):1688–1692. https://doi.org/10.1016/j.ijmachtools.2008.07.010 CrossRef

55.

Ambrogio G, Filice L, Gagliardi F (2012) Formability of lightweight alloys by hot incremental sheet forming. Mater Des 34:501–508. https://doi.org/10.1016/j.matdes.2011.08.024 CrossRef

56.

Fan G, Sun F, Meng X, Gao L, Tong G (2010) Electric hot incremental forming of Ti-6Al-4V titanium sheet. Int J Adv Manuf Technol 49(9):941–947. https://doi.org/10.1007/s00170-009-2472-2 CrossRef

57.

Zhang Q, Xiao F, Guo H, Li C, Gao L, Guo X, Han W, Bondarev AB (2010) Warm negative incremental forming of magnesium alloy AZ31 Sheet: New lubricating method. J Mater Process Technol 210(2):323–329CrossRef

58.

Ji YH, Park JJ (2008) Formability of magnesium AZ31 sheet in the incremental forming at warm temperature. J Mater Process Technol 201(1–3):354–358. https://doi.org/10.1016/j.jmatprotec.2007.11.206 CrossRef

59.

Ji YH, Park JJ (2008) Incremental forming of free surface with magnesium alloy AZ31 sheet at warm temperatures. Trans Nonferrous Metals Soc China 18, Supplement 1(0):165–169CrossRef

60.

Ambrogio G, Filice L, Manco GL (2008) Warm incremental forming of magnesium alloy AZ31. CIRP Ann Manuf Technol 57(1):257–260. https://doi.org/10.1016/j.cirp.2008.03.066 CrossRef

61.

Galdos L, Argandoña ESD, Ulacia I, Arruebarrena G (2012) Warm incremental forming of magnesium alloys using hot fluid as heating media. Key Eng Mater 504–506:815–820CrossRef

62.

Mohammadi A, Vanhove H, Weise D, Landgrebe D, Van Bael A, Duflou JR (2017) Influence of global forced-air warming on the bulge formation in shallow sloped SPIF parts. Procedia Engineering 183:149–154. https://doi.org/10.1016/j.proeng.2017.04.046 CrossRef

63.

Göttmann A, Bailly D, Bergweiler G, Bambach M, Stollenwerk J, Hirt G, Loosen P (2013) A novel approach for temperature control in ISF supported by laser and resistance heating. Int J Adv Manuf Technol 67(9–12):2195–2205. https://doi.org/10.1007/s00170-012-4640-z CrossRef

64.

Salandro WA, Jones JJ, McNeal TA, Roth JT, Hong S-T, Smith MT (2010) Formability of al 5xxx sheet metals using pulsed current for various heat treatments. J Manuf Sci Eng 132(5):0151016. https://doi.org/10.1115/1.4002185 CrossRef

65.

Salandro W, Jones J, Bunget C, Mears L, Roth J (2015) Electrically assisted forming, modeling and control. Springer Series in Advanced Manufacturing

66.

Kinsey B, Cullen G, Jordan A, Mates S (2013) Investigation of electroplastic effect at high deformation rates for 304SS and Ti-6Al-4V. CIRP Ann 62(1):279–282. https://doi.org/10.1016/j.cirp.2013.03.058 CrossRef

67.

Magargee J, Morestin F, Cao J (2013) Characterization of flow stress for commercially pure titanium subjected to electrically-assisted deformation. ASME Journal of Engineering Materials and Technologies 135(4):041003. https://doi.org/10.1115/1.4024394 CrossRef

68.

Perkins TA, Kronenberger TJ, Roth JT (2007) Metallic forging using electrical flow as an alternative to warm/hot working. J Manuf Sci Eng 129(1):84–94. https://doi.org/10.1115/1.2386164 CrossRef

69.

Magargee J, Fan R, Cao J (2013) Analysis and observations of current density sensitivity and thermally activated mechanical behavior in electrically-assisted deformation. ASME J Manufacturing Science and Engineering 135:061022. https://doi.org/10.1115/1.4025882 CrossRef

70.

Adams D, Jeswiet J (2014) Single point incremental forming of 6061-T6 using electrically assisted forming methods. Proc Inst Mech Eng B J Eng Manuf 228(7):757–764. https://doi.org/10.1177/0954405413501670 CrossRef

71.

Hagan E, Jeswiet J (2003) A review of conventional and modern single-point sheet metal forming methods. Proc Inst Mech Eng B J Eng Manuf 217(2):213–225. https://doi.org/10.1243/095440503321148858 CrossRef

72.

Skjoedt M, Silva MB, Martins PAF, Bay N (2010) Strategies and limits in multi-stage single-point incremental forming. J Strain Anal Eng Des 45(1):33–44. https://doi.org/10.1243/03093247JSA574 CrossRef

73.

Skjoedt M, Bay N, Endelt B, Ingarao G (2008) Multi stage strategies for single point incremental forming of a cup. J Mater Form 1(1):1199–1202. https://doi.org/10.1007/s12289-008-0 CrossRef

74.

Duflou JR, Verbert J, Belkassem B, Gu J, Sol H, Henrard C, Habraken AM (2008) Process window enhancement for single point incremental forming through multi-step toolpaths. CIRP Ann Manuf Technol 57(1):253–256. https://doi.org/10.1016/j.cirp.2008.03.030 CrossRef

75.

Verbert J, Belkassem B, Henrard C, Habraken AM, Gu J, Sol H, Lauwers B, Duflou JR (2008) Multi-step Toolpath approach to overcome forming limitations in single point incremental forming. Int J Mater Form 1(1):1203–1206. https://doi.org/10.1007/s12289-008-0 CrossRef

76.

Liu Z, Daniel WJT, Li Y, Liu S, Meehan PA (2014) Multi-pass deformation design for incremental sheet forming: analytical modeling, finite element analysis and experimental validation. J Mater Process Technol 214(3):620–634. https://doi.org/10.1016/j.jmatprotec.2013.11.010 CrossRef

77.

Li J, Hu J, Pan J, Geng P (2011) Thickness distribution and design of a multi-stage process for sheet metal incremental forming. Int J Adv Manuf Technol 62(9–12):981–988

78.

Malhotra R, Bhattacharya A, Kumar A, Reddy NV, Cao J (2011) A new methodology for multi-pass single point incremental forming with mixed toolpaths. CIRP Ann - Manuf Technol 60(1):323–326. https://doi.org/10.1016/j.cirp.2011.03.145 CrossRef

79.

Xu D, Malhotra R, Reddy NV, Chen J, Cao J (2012) Analytical prediction of stepped feature generation in multi-pass single point incremental forming. J Manuf Process 14(4):487–494. https://doi.org/10.1016/j.jmapro.2012.08.003 CrossRef

80.

Cao T, Lu B, Xu D, Zhang H, Chen J, Long H, Cao J, (2015) An efficient method for thickness prediction in multi-pass incremental sheet forming. Int J Adv Manuf Technol, 2015 77(1):469–483. https://doi.org/10.1007/s00170-014-6489-9 CrossRef

81.

Lingam R, Bansal A, Reddy NV (2015) Analytical prediction of formed geometry in multi-stage single point incremental forming. Int J Mater Form 9(3):395–404CrossRef

82.

Vanhove H, Gu J, Sol H, Duflou JR (2011) Process window extension for incremental forming through optimal work plane rotation. Steel Res Int, Special edition ICTP 2011, 508–512

83.

Tanaka S, Hayakawa K, Nakamura T, (2011) Incremental sheet forming with direction control of path planes. Steel Research Int., Special edition ICTP 2011, 503–507

84.

Jeswiet J, Duflou JR, Szekeres A, Lefebvre P (2005) Custom manufacture of a solar cooker – a case study. Adv Mater Res 6–8:487–492. https://doi.org/10.4028/www.scientific.net/AMR.6-8.487 CrossRef

85.

Ambrogio G, Gagliardi F, Bruschi S, Filice L (2013) Robust design of incremental sheet forming by Taguchi’s method. Procedia CIRP 12:270–275. https://doi.org/10.1016/j.procir.2013.09.047 CrossRef

86.

Azaouzi M, Lebaal N (2012) Tool path optimization for single point incremental sheet forming using response surface method. Simul Model Pract Theory 24:49–58. https://doi.org/10.1016/j.simpat.2012.01.008 CrossRef

87.

Jeswiet J (2005) Asymmetric incremental sheet forming. Adv Mater Res 6–8:35–58CrossRef

88.

Malhotra R, Reddy NV, Cao J (2010) Automatic 3D spiral Toolpath generation for single point incremental forming. J Manuf Sci Eng 132(6):061003. https://doi.org/10.1115/1.4002544 CrossRef

89.

Rauch M, Hascoet J-Y, Hamann J-C, Plenel Y (2009) Tool path programming optimization for incremental sheet forming applications. Comput Des 41(12):877–885

90.

Duflou JR, Vanhove H, Verbert J, Gu J, Vasilakos I, Eyckens P (2010) Twist revisited: twist phenomena in single point incremental forming. CIRP Ann Manuf Technol 59(1):307–310. https://doi.org/10.1016/j.cirp.2010.03.018 CrossRef

91.

Hamilton K, Jeswiet J (2010) Single point incremental forming at high feed rates and rotational speeds: surface and structural consequences. CIRP Ann Manuf Technol 59(1):311–314. https://doi.org/10.1016/j.cirp.2010.03.016 CrossRef

92.

Ham M, Jeswiet J (2007) Forming limit curves in single point incremental forming. CIRP Ann Manuf Technol 56(1):277–280. https://doi.org/10.1016/j.cirp.2007.05.064 CrossRef

93.

Bahloul R, Arfa H, BelHadjSalah H (2014) A study on optimal design of process parameters in single point incremental forming of sheet metal by combining box–Behnken design of experiments, response surface methods and genetic algorithms. Int J Adv Manuf Technol 74(1–4):163–185. https://doi.org/10.1007/s00170-014-5975-4 CrossRef

94.

Desai BV, Desai KP, Raval HK (2014) Die-less rapid prototyping process: parametric investigations. Prog Mater Sci 6:666–673. https://doi.org/10.1016/j.mspro.2014.07.082 CrossRef

95.

Jeswiet J, Hagan E, Szekeres A (2002) Forming parameters for incremental forming of aluminium alloy sheet metal. Proc Inst Mech Eng B J Eng Manuf 216(10):1367–1371. https://doi.org/10.1243/095440502320405458 CrossRef

96.

León J, Salcedo D, Ciáurriz C, Luis CJ, Fuertes JP, Puertas I, Luri R (2013) Analysis of the influence of geometrical parameters on the mechanical properties of incremental sheet forming parts. Procedia Eng 63:445–453. https://doi.org/10.1016/j.proeng.2013.08.206 CrossRef

97.

Sarraji WKH, Hussain J, Ren W-X (2012) Experimental investigations on forming time in negative incremental sheet metal forming process. Mater Manuf Process 27(5):499–506. https://doi.org/10.1080/10426914.2011.585550 CrossRef

98.

Ambrogio G, Cozza V, Filice L, Micari F (2007) An analytical model for improving precision in single point incremental forming. J Mater Process Technol 191(1–3):92–95. https://doi.org/10.1016/j.jmatprotec.2007.03.079 CrossRef

99.

Bhattacharya A (2014) Studies on incremental forming to enhance accuracy and geometric complexity, PhD Dissertation, IIT Kanpur

100.

Lu B, Chen J, Ou H, Cao J (2013) Feature-based tool path generation approach for incremental sheet forming process. J Mater Process Technol 213(7):1221–1233. https://doi.org/10.1016/j.jmatprotec.2013.01.023 CrossRef

101.

Malhotra R (2012) Fundamentals of process mechanics and process innovation in incremental forming. PhD dissertation, Northwestern University

102.

Verbert J, Duflou J, Lauwers B (2007) Feature based approach for increasing the accuracy of the SPIF process. Key Eng Mater 344:527–534. https://doi.org/10.4028/www.scientific.net/KEM.344.527 CrossRef

103.

Behera AK, Lauwers B, Duflou JR (2014) Tool path generation framework for accurate manufacture of complex 3D sheet metal parts using single point incremental forming. Comput Ind 65(4):563–584. https://doi.org/10.1016/j.compind.2014.01.002 CrossRef

104.

Bambach M, Taleb Araghi B, Hirt G (2009) Strategies to improve the geometric accuracy in asymmetric single point incremental forming. Prod Eng 3(2):145–156. https://doi.org/10.1007/s11740-009-0150-8 CrossRef

105.

Verbert J (2010) Computer aided process planning for rapid prototyping with incremental sheet forming techniques, PhD dissertation Katholieke Universiteit Leuven

106.

Verbert J, Behera AK, Lauwers B, Duflou JR (2011) Multivariate adaptive regression splines as a tool to improve the accuracy of parts produced by FSPIF. Key Eng Mater 473:841–846. https://doi.org/10.4028/www.scientific.net/KEM.473.841 CrossRef

107.

Allwood JM, Music O, Raithathna A, Duncan SR (2009) Closed-loop feedback control of product properties in flexible metal forming processes with mobile tools. CIRP Ann Manuf Technol 58(1):287–290. https://doi.org/10.1016/j.cirp.2009.03.065 CrossRef

108.

Hirt G, Bambach M, Bleck W, Prahl U, Stollenwerk J (2015) The development of incremental sheet forming from flexible forming to fully integrated production of sheet metal parts, advances in production technology. 117–129, Springer International Publishing

109.

Elford M, Saha P, Seong D, Haque MZ, Yoon JW (2013) Benchmark 3 - incremental sheet forming, AIP Conference Proceedings, American Institute of Physics, Melbourne, 227–261

110.

Eyckens P, Van Bael A, Van Houtte P (2009) Marciniak-Kuczynski type modelling of the effect of through-thickness shear on the forming limits of sheet metal. Int J Plast 25(12):2249–2268. https://doi.org/10.1016/j.ijplas.2009.02.002 CrossRef

111.

Seong D, Haque MZ, Kim JB, Stoughton TB, Yoon JW (2014) Suppression of necking in incremental sheet forming. Int J Solids Struct 51(15–16):2840–2849. https://doi.org/10.1016/j.ijsolstr.2014.04.007 CrossRef

112.

Sena JIV, Guzmán CF, Duchêne L, Habraken AM, Behera AK, Duflou JR, Valente R, de Sousa RJA, (2015) Simulation of a two-slope pyramid made by SPIF using an adaptive remeshing method with solid-shell finite element. Int J Mater Form. Issn: 1960-6206. https://doi.org/10.1007/s12289-014-1213-8 CrossRef

113.

Duchêne L, Guzmán CF, Behera AK, Duflou JR, Habraken AM (2013) Numerical simulation of a pyramid steel sheet formed by single point incremental forming using solid-Shell finite elements. Key Eng Mater 549:180–188. https://doi.org/10.4028/www.scientific.net/KEM.549.180 CrossRef

114.

Tuninetti V, Yuan S, Gilles G, Guzmán CF, Habraken AM, Duchêne L (2016) Modeling the ductile fracture and the plastic anisotropy of DC01 steel at room temperature and low strain rates. J Phys Conf Ser 734:032075CrossRef

115.

Sena J, Lequesne C, Duchene L, Habraken A, Valente R, Alves de Sousa R (2016) Single point incremental forming simulation with adaptive remeshing technique using solid-shell elements. Engineering Computations International Journal for Computer- Aided Engineering and Software 33(5):1388–1421

116.

Bouffioux C, Eyckens P, Henrard C, Aerens R, Van Bael A, Sol H, Duflou JR, Habraken AM (2008) Identification of material parameters to predict single point incremental forming forces. Int J Mater Form 1(S1):1147–1150. https://doi.org/10.1007/s12289-008-0183-0 CrossRef

117.

Hill (1948) A theory of the yielding and plastic flow of anisotropic metals. Proc R Soc Lond A 193(1033):281–297. https://doi.org/10.1098/rspa.1948.0045 MathSciNetCrossRefMATH

118.

Bambach M, Hirt G (2005) Performance assessment of element formulations and constitutive laws for the simulation of incremental sheet forming (ISF). Proceedings of the COMPLAS VIII, CIMNE, Barcelona, 1–4

119.

Flores P, Duchêne L, Bouffioux C, Lelotte T, Henrard C, Pernin N, Van Bael A, He S, Duflou JR, Habraken AM (2007) Model identification and FE simulations: effect of different yield loci and hardening laws in sheet forming. Int J Plast 23(3):420–449. https://doi.org/10.1016/j.ijplas.2006.05.006 CrossRefMATH

120.

Eyckens P, Belkassem B, Henrard C, Gu J, Sol H, Habraken AM, Duflou JR, Van Bael A, Van Houtte P (2010) Strain evolution in the single point incremental forming process: digital image correlation measurement and finite element prediction. Int J Mater Form 4(1):55–71CrossRef

121.

Bouffioux C, Lequesne C, Vanhove H, Duflou JR, Pouteau P, Duchêne L, Habraken AM (2011) Experimental and numerical study of an AlMgSc sheet formed by an incremental process. J Mater Process Technol 211(11):1684–1693. https://doi.org/10.1016/j.jmatprotec.2011.05.010 CrossRef

122.

Henrard C, Bouffioux C, Eyckens P, Sol H, Duflou JR, Van Houtte P, Van Bael A, Duchêne L, Habraken AM (2010) Forming forces in single point incremental forming: prediction by finite element simulations, validation and sensitivity. Comput Mech 47(5):573–590CrossRef

123.

Lievers W, Pilkey AK, Lloyd DJ (2004) Using incremental forming to calibrate a void nucleation model for automotive aluminum sheet alloys. Acta Mater 52(10):3001–3007. https://doi.org/10.1016/j.actamat.2004.03.002 CrossRef

124.

Belchior J, Guillo M, Courteille E, Maurine P, Leotoing L, Guines D (2013) Off-line compensation of the tool path deviations on robotic machining: application to incremental sheet forming. Robot Comput Integr Manuf 29(4):58–69. https://doi.org/10.1016/j.rcim.2012.10.008 CrossRef

125.

Mirnia MJ, Mollaei Dariani B (2012) Analysis of incremental sheet metal forming using the upper-bound approach. Proc Inst Mech Eng B J Eng Manuf 226(8):1309–1320. https://doi.org/10.1177/0954405412445113 CrossRef

126.

Li Y, Liu Z, Lu H, Daniel WJT, Liu S, Meehan P (2014) Efficient force prediction for incremental sheet forming and experimental validation. Int J Adv Manuf Technol 73:571–587CrossRef

127.

Li Y, Daniel WJT, Liu Z, Lu H, Meehan PA (2015) Deformation mechanics and efficient force prediction in single point incremental forming. J Mater Process Technol 221:100–111. https://doi.org/10.1016/j.jmatprotec.2015.02.009 CrossRef

128.

Jackson K (2008) The mechanics of incremental sheet forming. PhD thesis, University of Cambridge

129.

Bambach M (2010) A geometrical model of the kinematics of incremental sheet forming for the prediction of membrane strains and sheet thickness. J Mater Process Technol 210(12):1562–1573. https://doi.org/10.1016/j.jmatprotec.2010.05.003 CrossRef

130.

Hirt G, Bambach M (2005) Modelling incremental sheet forming using a meshless surface representation based on radial basis functions. Advanced Technology of Plasticity. Proceedings of the 8th International Conference on Technology of Plasticity, 261–262

131.

Raithatha A, Duncan SR (2009) Rigid plastic model of incremental sheet deformation using second-order cone programming. Int J Numer Methods Eng 78(8):955–979. https://doi.org/10.1002/nme.2512 MathSciNetCrossRefMATH

132.

Mirnia MJ, Mollaei Dariani B, Vanhove H, Duflou JR (2014) An investigation into thickness distribution in single point incremental forming using sequential limit analysis. Int J Mater Form 7(4):469–477. https://doi.org/10.1007/s12289-013-1143-x CrossRef

122.

Filice L (2006) A phenomenology-based approach for modeling material thinning and formability in incremental forming of cylindrical parts. Proc IMechE 220(9):1449–1455. https://doi.org/10.1243/09544054JEM595 CrossRef

134.

Bambach M, Grzibovskis R (2013) Analysis of optimal metal flow in incremental sheet forming. PAMM 13(1):331–332. https://doi.org/10.1002/pamm.201310161 CrossRef

135.

Sebastiani G, Brosius A, Tekkaya AE, Homberg W, Kleiner M (2007) Decoupled simulation method for incremental sheet metal forming. AIP Conf Proc 908:1501–1506CrossRef

136.

Hadoush A, van den Boogaard A (2009) Substructuring in the implicit simulation of single point incremental sheet forming. Int J Mater Form 2(3):181–189. https://doi.org/10.1007/s12289-009-0402-3 CrossRef

137.

Hadoush AMH (2010) Efficient simulation and process mechanics of incremental sheet forming. PhD thesis University of Twente, Netherland

138.

Hadoush A, van den Boogaard AH (2008) Time reduction in implicit single point incremental sheet forming simulation by refinement - derefinement. Int J Mater Form 1(1):1167–1170CrossRef

139.

Lequesne C, Henrard C, Bouffioux C, Duflou JR, Habraken AM (2008) Adaptive remeshing for incremental forming simulation, Numisheet 2008, Interlaken, Switzerland, 32:4–8

140.

Giraud-Moreau L, Cherouat A, Zhang J, Borouchaki H (2013) Comparison between an advanced numerical simulations of sheet incremental forming using adaptive remeshing and experimental results. Key Eng Mater 554–557:1375–1381CrossRef

141.

Suresh K, Regalla SP (2014) Effect of mesh parameters in finite element simulation of single point incremental sheet forming process. Procedia Materials Science 6:376–382. https://doi.org/10.1016/j.mspro.2014.07.048 CrossRef

142.

Bambach M (2016) Fast simulation of asymmetric incremental sheet metal forming by adaptive remeshing and subcycling. Int J Mater Form 9(3):353–360. https://doi.org/10.1007/s12289-014-1204-9 CrossRef

143.

Delamézière A, Yu Y, Robert C, Ayed LB, Nouari M (2010) Numerical simulation of incremental sheet forming by simplified approach. AIP Conf Proc 1315:619–624

144.

Ben Ayed L, Robert C, Delamézière A, Nouari M, Batoz JL (2014) Simplified numerical approach for incremental sheet metal forming process. Eng Struct 62-63:75–86. https://doi.org/10.1016/j.engstruct.2014.01.033 CrossRef

145.

Tvergaard V, Needleman A (1984) Analysis of the cup-cone fracture in a round tensile bar. Acta Metall 32(1):157–169. https://doi.org/10.1016/0001-6160(84)90213-X CrossRef

146.

Guzman CF (2016) Experimental and numerical characterization of damage and application to incremental forming, PhD thesis University of Liège http://hdl.handle.net/2268/192884

147.

Thomason PE (1990) Ductile fracture of metals. Pergamon Press, Oxford

148.

Silva MB, Skjoedt M, Martins PAF, Bay N (2008) Revisiting the fundamentals of single point incremental forming by means of membrane analysis. Int J Mach Tools Manuf 48(1):73–83. https://doi.org/10.1016/j.ijmachtools.2007.07.004 CrossRef

149.

Jeswiet J, Young D (2005) Forming limit diagrams for single-point incremental forming of aluminium sheet. Proc Inst Mech Eng B J Eng Manuf 219(4):359–364. https://doi.org/10.1243/095440505X32210 CrossRef

150.

Xue L (2007) Damage accumulation and fracture initiation in uncracked ductile solids subject to triaxial loading. Int J Solids Struct 44(16):5163–5181. https://doi.org/10.1016/j.ijsolstr.2006.12.026 CrossRefMATH

151.

Hussain G, Gao L, Hayat N, Qijian L (2007) The effect of variation in the curvature of part on the formability in incremental forming: an experimental investigation. Int J Mach Tools Manuf 47(14):2177–2181. https://doi.org/10.1016/j.ijmachtools.2007.05.001 CrossRef

152.

Xue L, Belytschko T (2010) Fast methods for determining instabilities of elastic-plastic damage models through closed-form expressions. Int J Numer Methods Eng 84(12):1490–1518. https://doi.org/10.1002/nme.2947 MathSciNetCrossRefMATH

153.

Ben Hmida R, Richard F, Thibaud S, Malécot P, (2015) Elastic-plastic damage behavior identification in micro scale length from instrumented micro-single point incremental forming 4M/ICOMM2015 conf., Milan, Italy, Research Publishing

154.

Lemaitre J, Chaboche JL (1985) Mécanique des Matériaux Solides, Dunod

155.

Cooper DR, Rossie KE, Gutowski TG (2017) The energy requirements and environmental impacts of sheet metal forming: an analysis of five forming processes. J Mater Process Technol 244:116–135. https://doi.org/10.1016/j.jmatprotec.2017.01.010 CrossRef

156.

Allwood JM, King GPF, Duflou J (2005) A structured search for applications of the incremental sheet forming process by product segmentation. Proc I Mech E, Part B, Journal of Engineering Manufacture 219(B2):239–244. https://doi.org/10.1243/095440505X8145 CrossRef

157.

Ambrogio G, De Napoli L, Filice L, Gagliardi F, Muzzupappa M (2005) Application of incremental forming process for high customised medical product manufacturing. J Mater Process Technol 162-163:156–162. https://doi.org/10.1016/j.jmatprotec.2005.02.148 CrossRef

158.

Duflou JR, Lauwers B, Verbert J, Gelaude F, Tunckol Y (2005) Medical application of single point incremental forming: cranial plate manufacturing, virtual modeling and rapid manufacturing. Proc. 2nd Int. Conf. on Advanced Research in Virtual and Rapid Prototyping 161–66

159.

Duflou JR, Behera AK, Vanhove H, Bertol LS (2013) Manufacture of accurate titanium Cranio-facial implants with high forming angle using single point incremental forming. Key Eng Mater 549:223–230. https://doi.org/10.4028/www.scientific.net/KEM.549.223 CrossRef

160.

Bagudanch I, Lozano-Sánchez LM, Puigpinós L, Sabater M, Elizalde LE, Elías-Zúñiga A, Garcia-Romeu ML (2015) Manufacturing of polymeric biocompatible cranial geometry by single point incremental forming. Procedia Engineering 132:267–273. https://doi.org/10.1016/j.proeng.2015.12.494 CrossRef

161.

Göttmann A, Korinth M (2012) Manufacturing of cranial implants using incremental sheet metal forming. Proceedings 1st Internat. Conf. on Design and Processes for Medical Devices PROMED, 287-290

162.

Lu B, Xu DK, Liu RZ, Ou H, Long H, Chen J (2015) Cranial reconstruction using double side incremental forming. Key Eng Mater 639:535–542. https://doi.org/10.4028/www.scientific.net/KEM.639.535 CrossRef

163.

Vanhove H, Carette Y, Vancleef S, Duflou JR (2017) Production of thin shell clavicle implants through single point incremental forming. Procedia Engineering 183:174–179. https://doi.org/10.1016/j.proeng.2017.04.058 CrossRef

164.

McAllister P, Jeswiet J (2003) Medical device regulation for manufacturers. J Eng Med 217(H):459–467. https://doi.org/10.1243/09544110360729090 CrossRef

165.

Bailly D, Bambach M, Hirt G, Pofahl T, Herkrath R, Trautz M, (2014) Analysis into Differences betweenthe Buckling in Single-Point and Two-Point Incremental Sheet Forming of Components for Self-SupportingSheet Metal Structures. Key Eng Mater 622:367–374

166.

Padrao JL (2009) Single point incremental forming, Msc Thesis. Instituto Superior Tecnico Universidade Tecnica de Lisboa

167.

Appermont R, Van Mieghem B, Van Bael, A, Bens J, Ivens J, Vanhove H, Behera AK, Duflou J (2012) Sheet-metal based molds for low-pressure processing of thermoplastics. Proceedings of the 5th Bi-Annual PMI Conference 5:383–388

168.

Bens J, Van Mieghem B, Appermont R, Vanhove H, Van Bael A, Duflou J, Ivens J (2012) Development of material and energy-efficient metal sheet based tools for composite manufacturing, Proceedings 15th European Conf. on Composite Materials, ECCM, Venice

169.

Young D, Jeswiet J (2004) Wall thickness variations in single-point incremental forming. Proc Inst Mech Eng B J Eng Manuf 218(11):1453–1459. https://doi.org/10.1243/0954405042418400 CrossRef

170.

Ambrogio G, Di Lorenzo R, Micari F (2003) Analysis of the economical effectiveness of incremental forming processes: an industrial case study. Proceedings VI AITeM Conference, Gaeta, Italy

171.

Ambrogio G, Sgambitterra E, De Napoli L, Gagliardi F, Fragomeni G, Piccininni A, Gugleilmi P, Palumbo G, Sorgente D, La Barbera L, Villa TM (2017) Performance analysis of titanium prostheses manufactured by superplastic forming and incremental forming. Procedia Engineering 183:168–173. https://doi.org/10.1016/j.proeng.2017.04.057 CrossRef

172.

Centeno G, Bagudanch I, Morales-Palma D, Garcia-Romeu ML, Gonzalez-Perez-Somarriba B, Martinez-Donaire AJ, Gonzalez-Perez LM, Vallellano C (2017) Recent approaches for the manufacturing of polymeric cranial prostheses by incremental sheet forming. Procedia Engineering 183:180–187. https://doi.org/10.1016/j.proeng.2017.04.059 CrossRef

Titel: Single point incremental forming: state-of-the-art and prospects
verfasst von: Joost R. Duflou
Anne-Marie Habraken
Jian Cao
Rajiv Malhotra
Markus Bambach
Dave Adams
Hans Vanhove
Amirahmad Mohammadi
Jack Jeswiet
Publikationsdatum: 29.12.2017
Verlag: Springer Paris
Erschienen in: International Journal of Material Forming / Ausgabe 6/2018
Print ISSN: 1960-6206
Elektronische ISSN: 1960-6214
DOI: https://doi.org/10.1007/s12289-017-1387-y

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2018

Contact geometry estimation and precise radial force prediction for the radial-axial ring rolling process

Numerical and experimental investigations in electromagnetic riveting with different rivet dies

Local strain measurements of yarns inside of 3D warp interlock fabric during forming process

Methodology for metamodelling of microstructure evolution: precipitation kinetic case study

Comprehensive benchmark study of commercial sheet metal forming simulation softwares used in the automotive industry

Effect of internal pressure on springback during low pressure tube hydroforming

Premium Partner

Marktübersichten