nach oben

Metallurgist

Erschienen in:

10.06.2024

Sintering process with gaseous fuel injection into the sintered layer

verfasst von: A. N. Shapovalov, A. Yu. Fuks

Erschienen in: Metallurgist | Ausgabe 1/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This paper presents the results of laboratory experiments to study the effect of the consumption of gaseous fuel (natural gas) supplied into a sintered charge layer on sintering process indicators and sinter quality under the charge conditions of the Ural Steel Company at charge layer heights of 350 to 500 mm.

It was established that an increase in the consumption of natural gas supplied to the sintered charge layer in the range from 3 m³/t to 7 m³/t of sinter increases the vertical sintering rate, yield, specific productivity, and strength properties of the sinter. The benefit of supplying gaseous fuel to the layer is due to improvement in the temperature-time conditions of sintering, which increases the degree of involvement of the charge ore in the processes of melt formation and ensures a more complete use of solid fuel at lower consumption. The efficiency of supplying gaseous fuel to the sintered charge layer increases substantially with increasing sintered layer height because of a decrease in the proportion of the upper part of the sinter, which is formed under less favorable thermal conditions.

According to the totality of indicators, considering the cost of natural gas, its optimal consumption in the charge conditions of the Ural Steel Company is 3.0 m³/t of sinter, which ensures the maximum increase in sintering indicators and sinter quality compared with traditional sintering technology.

Vorheriger Artikel Improvement of the gas-dynamic and thermal modes of external heating of a sintering mixture layer

Nächster Artikel Results of steel microarc diffusion impregnation with boron combined with carbide-forming elements

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Korotich VI, Frolov YuA, Bezdezhsky GN (2003) Agglomeration of ore materials. scientific publication, GOU VPO UGTU-UPI, Yekaterinburg

Frolov YA (2016) Agglomeration: technology, heating engineering, management, ecology. Metallurgizdat, Moscow

Huang XX, Fan XH, Chen XL, Zhao XZ, Gan M (2019) Optimization model of fuel distribution in materials bed of iron ore sintering process. Ironmak Steelmak 46(7):649–655. https://doi.org/10.1080/03019233.2018.1440160CrossRef

Jeon J‑W, Jung S‑M, Sasaki Y (2010) Formation of calcium ferrites under controlled oxygen potentials at 1273 K. Isij Int 50(8):1064–1070. https://doi.org/10.2355/isijinternational.50.1064CrossRef

Lv Xuewei, Chenguang B, Qingyu D et al (2011) Behavior of liquid phase formation during iron ores sintering. ISIJ Int 51(5):722–727. https://doi.org/10.2355/isijinternational.51.722CrossRef

Malysheva TY, Dolitskaya OA (2004) Petrography and mineralogy of iron ore raw materials, manual for graduate students. MISIS, Moscow

Feoktistov AV, Odintsov AA (2014) Making more Efficient Use of Solid Fuel in Two-Layer Sintering. Metallurgist 58:469–477. https://doi.org/10.1007/s11015-014-9935-x

Zhou M, Wang Y, Zhao D et al (2020) A study of double layer pre-sintering toward super-high bed height. 11th Intern Symposium on High-Temperature Metallurgical Processing. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-030-36540-0_57

Zhong Q, Liu HB, Xu LP et al (2021) An efficient method for iron ore sintering with high-bed layer: double-layer sintering. J. Iron Steel Res. Int. 28(11):1366–1374. https://doi.org/10.1007/s42243-021-00576-4CrossRef

10.

Shurkhal VA (1985) External heating during agglomeration. Naukova Dumka, Kyiv

11.

Fan X, Yu Z, Gan M, Chen X, Huang Y (2016) Flue gas recirculation in iron ore sintering process. Ironmak Steelmak 43(6):403–410. https://doi.org/10.1179/1743281215Y.0000000029CrossRef

12.

Frolov YA, Nokesh A, Polotskii LI (2017) Study of Flue-Gas Recirculation Sintering. Metallurgist 61:629–637. https://doi.org/10.1007/s11015-017-0544-3

13.

Chen XL, Fan XH, Gan M, Huang YS, Yu ZY (2018) Sintering behaviors of iron ore with flue gas circulation. Ironmak Steelmak 45(5):434–440. https://doi.org/10.1080/03019233.2017.1280985CrossRef

14.

Shapovalov AN et al (2019) Improvement of agglomeration technology by a sinter mix preheating. Mater Sci Forum 946:500–505. https://doi.org/10.4028/www.scientific.net/msf.946.500CrossRef

15.

Lobanov VI, Matyukhin VI, Goltsev VA Thermal and technological aspects of using the layer method of burning natural gas in metallurgical units,” proceedings of the intl. Scientific-technical conf. “the creative heritage of B.I. Kitaev in the 21st century,” UGTU-UPI vol 1998. Yekaterinburg, pp 122–125

16.

Oyama N, Iwami Y, Yamamoto T et al (2011) Development of secondary-fuel injection technology for energy reduction in the iron ore sintering process. isij Int 51(6):913–921CrossRef

17.

Iwami Y, Yamamoto T, Higuchi T et al (2013) Effect of oxygen enrichment on sintering with combined usage of coke breeze and gaseous fuel. Isij Int 53(9):1633–1641. https://doi.org/10.2355/isijinternational.53.1633CrossRef

18.

Cheng Z, Yang J, Guo Z et al (2019) Numerical analysis of heat and mass transfer coupled with gaseous fuel injection in reactive porous media. J Heat Transfer 141(11):112601. https://doi.org/10.1115/1.4044365CrossRef

19.

Matyukhin VI, Yaroshenko YG, Bragin VV (2019) Sintered Iron-Ore Manufacturing Capabilities when Using Combined Fuel. Steel in Trans 49(11):771-777. https://doi.org/10.3103/S0967091219110111

20.

Shapovalov AN, Ovchinnikova EV, Maistrenko NA (2015) Improving the Preparation of the Charge Used for Sintering at Ural Steel, Metallurgist 59(3-4): 204-211. https://doi.org/10.1007/s11015-015-0085-6

21.

Puzanov VP, Kobelev VA (2005) Introduction to metallurgical structuring technologies. UO RAN, Yekaterinburg

22.

Shiryaeva EV, Podgorodetskii GS, Malysheva TY et al (2014) Effects of adding low-alkali red mud to the sintering batch at OAO Ural’skaya Stal’. Steel Transl 44:6–10. https://doi.org/10.3103/S0967091214010173

23.

Shapovalov AN et al (2019) Iop Conf Ser Mater Sci Eng 625:12009. https://doi.org/10.1088/1757-899X/625/1/012009CrossRef

Titel: Sintering process with gaseous fuel injection into the sintered layer
verfasst von: A. N. Shapovalov
A. Yu. Fuks
Publikationsdatum: 10.06.2024
Verlag: Springer US
Erschienen in: Metallurgist / Ausgabe 1/2024
Print ISSN: 0026-0894
Elektronische ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-024-01699-1

Results of steel microarc diffusion impregnation with boron combined with carbide-forming elements

Investigation of the influence of vibration on the processes of porous magnesium products formation

Reliability of digital measurement results for structural images in metal science

Ways to improve the processes of longitudinal rolling on a pipe rolling plant with a plug mill to reduce metal consumption and increase production output

Development of an automated control system for the coiler mandrel drive

Corrosion properties, chemical composition, and surface morphology of non-ferrous metals after tests at different temperature and humidity conditions

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Bildnachweise

MKVS GbR/© MKVS GbR, Nordson/© Nordson, ViscoTec/© ViscoTec, BCD Chemie GmbH, Merz+Benteli/© Merz+Benteli, Robatech/© Robatech, Hermann Otto GmbH/© Hermann Otto GmbH, Ruderer Klebetechnik GmbH, Xometry Europe GmbH/© Xometry Europe GmbH, Scheugenpflug/© Scheugenpflug, Sika/© Sika, Medmix/© Medmix, Kisling AG/© Kisling AG, Dosmatix GmbH/© Dosmatix GmbH, Innotech GmbH/© Innotech GmbH, Hilger u. Kern GmbH, VDI Logo/© VDI Wissensforum GmbH, Dr. Fritz Faulhaber GmbH & Co. KG/© Dr. Fritz Faulhaber GmbH & Co. KG, BEINLICH PUMPEN GMBH/© BEINLICH PUMPEN GMBH