Skip to main content

1986 | OriginalPaper | Buchkapitel

Sizing an Emergency Venting System for a Cryogenic Dewar

verfasst von : C. K. Liu, L. G. Naes, A. F. Manikowski Jr.

Erschienen in: Advances in Cryogenic Engineering

Verlag: Springer US

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

If the vacuum vessel that insulates a cryogenic dewar for a spaceborne experiment prior to launch is damaged, air will leak into the vacuum insulation space. As the sudden heat load causes the pressure to rise in the dewar, a safety disk in the emergency vent line will burst at the design pressure differential to allow vaporized cryogenic fluid to escape. The emergency vent line should be sized such that sufficient gaseous cryogen will be vented to keep the pressure inside the dewar below the design limit. On the other hand, the line should not be so large as to impose an unnecessary heat load on the dewar filled with cryogenic fluid. A vent line computer program was generated to compute the maximum flow rate allowed for a proposed vent line system. Parametric studies have been carried out for different burst disk pressure differentials, liquid cryogen ullage, and vent line sizes. These programs are useful for sizing an emergency venting system for a cryogenic dewar.

Metadaten
Titel
Sizing an Emergency Venting System for a Cryogenic Dewar
verfasst von
C. K. Liu
L. G. Naes
A. F. Manikowski Jr.
Copyright-Jahr
1986
Verlag
Springer US
DOI
https://doi.org/10.1007/978-1-4613-2213-9_109

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.